Open Storage error 2258
Im trying to write a VI to write data in a PDM file and this is my first time using the PDM commands. I have the commands "Open storage", "Write" and "Close Storage" all wired to the top, but my VI will never run because "Open storage compartment" express VI comes up with error 2258 saying impossible to open the file. File, it seeks to 'open' does not exsist, but I tried opens it to crush with create, open or create, and create or replace, and there again and still the same error. What causes this?
Is the folder that you write to exist? I haven't used the screw PDM, another writing file screws can create a file and not a folder.
Tags: NI Software
Similar Questions
-
Mozilla firefox 25.0 tab opens with error on URL res://ieframe.dll/unknownprotocol.htm#chrome-extension://kcnhkahnjcbndmmehfkdnkjomaanaooo/widget.html any idea?
In my view, it is an extension of google voice, but I don't have chrome installed on my PC
Windows XP SP3 machine.
Hello
Sometimes a problem with Firefox can be a result of malware installed on your computer, you may not be aware of.
You can try these free programs to search for malicious software that work with your existing anti-virus software:
- Microsoft safety scanner
- MalwareBytes' Anti-Malware
- TDSSKiller - AntiRootkit utility
- Hitman Pro
- ESET Online Scanner
Microsoft Security Essentials is a good permanent antivirus for Windows 7/Vista/XP, if you do not already have one.
More information can be found in the article troubleshooting Firefox problems caused by malware .
This solve your problems? Please report to us!
I hope this helps!
Curtis
-
OfficeJet pro 8610: open door error ADF
The ADF begins to pull on a page then stops and says that there is a door open ADF error. I don't see where this would be. This is the first time I've ever used the ADF, so I can't tell if it worked before or not. The cover is not closed tight on the glass... which means that there is like a 1/4 "crack all around. I put the weight down on it and tried again, but which did not help. Any suggestions?
Hello @Idempke, greetings!
Thanks for joining the HP Forums. I would like to help
I understand that you are getting the error ADF door open on your printer. Try following the steps and check them out below:
Make sure that the doors of the ADF are closed on both sides. Please check the picture below. The red part surrounded by a circle is the ADF door. You can open the door and close the door with little force.
If the problem persists, try to unplug the printer from the power outlet when the printer is turned on. Wait 2 - 3 minutes then turn on the printer and check.
Let me know how it goes
See you soon
Please click on "acceptable Solution" on the post that solves your problem to help others to find the solution. To show appreciation my help, please click "Thumbs Up icon" below!
-
game of virtual villager of opening gives error code oxc8660160
Vitrual village (games)
I'll download the virtual villagers game and when I try and run it, it says Error failed to open oxc8660160 error code how can I fix? or whats wrong?
Since this is the problem with the game, I suggest you contact the site already download you. You can also try to contact the game manufacturer and also it could be the problem with the installation file damaged.
-
cc of Photoshop does not open JPEG - error message "file not found" just upgraded to the latest version of photohop cc
I just replaced my 9.5 Raw camera with Camera Raw 9.4, from this page:
Camera Raw installation of Adobe Photoshop CC and CS6 program
It worked, now I'm back in business!
PS. along the way, I installed Camera Raw 8.3 (manual drag-and - déposer), in response to advice on a pretty old thread, and that worked as well.
-
Parameter required missing "in origin' to 'open' event - ERROR?
what the hell does that mean? Happens when I double click ID some (but not all) of the files (or drag and drop them to anchor the icon). It displays the error and does not open the file. However by using file > open opens without error. (screenshot attached)
I've upgraded to Snow Leopard Monday and began to experience this after the "upgrade". What is a problem for Adobe InDesign, or something with Snow Leopard.
Thank you
Get rid of the symbol # in the name of your file. It seems that OSX 10.6 is our feet to the fire with the UNIX file naming convention.
-
Safari crashes on opening. The errors are:
Exception type: EXC_BAD_ACCESS (SIGSEGV)
Exception codes: KERN_INVALID_ADDRESS at 0 x 0000000000000023.
I have already downloaded the last update: 9.1.3, flash removed, removed malicious software known with Malwarebytes. I would like to re - install the operating system, but I downloaded an upgrade initially and do not know what file name to look for to try to do more. I may or may not have a backup. If I do, are there instructions for this kind of restore somewhere?
Thank you.
Hello
Can be an extension Safari or third party plugin that is causing Safari to unexpectedly stop then follow the instructions in this article to support > Safari: no support for third-party modules can cause Safari to suddenly quit, or have performance problems
-
I can't open firefox - everytime I try I get the above error message. It started after no apparent change or updates to my system, just a normal life stops. I tried to change the .htm, .html etc. register file names and reinstall as suggested, but it does not work. The only way I can open firefox after I reinstalled and it automatically launches a browser.
I can open firefox in a new user account that suggests something has changed in the account that I usually use, but I have no idea what since I didn't do myself any changes and you see nothing that suggests that it blocks firefox to open. I ran a virus scan and it is to come clean.
Does anyone have any suggestions? I would be very grateful for help.
Thank you.
Thank you both for your responses. I had tried all possible ways of opening firefox, including the direct use of firefox.exe and had also tried the suggestions in the link above, but had previously worked.
Having lived every suggestion I could find about the problem I'm afraid, I gave up looking and did a system restore that solved the problem!
-
Satellite A300 - constant "Webcam Driver Open Fail' error
I have searched and looked for solutions to this problem and feel like I've tried everything. Whenever I turn on my laptop or try to start my webcam I get the error "Webcam driver open fail." Please restart camera or computer. »
I used to be able to use the webcam with no problems, but it just stopped one day of work. I recently reformatted my drive to operate the State out-of-the-box, but it always shows an error whenever I try to use my webcam. I am running Windows Vista Home Premium on an A300 model: PSA - GCA. I also tried updating the driver for the webcam (and the last update of the BIOS) section of the support from Toshiba, but without success. I also tried to use the webcam XP driver, but still no luck.
Any idea on how to solve this problem?
Post edited by: Replicant
I also forgot to mention that in my device manager, I don't see my Chicony Webcam at all. There is no section for current imaging devices at all.
Hello
If you're looking for here in the forum you will find a sufficient number of threads on this problem but I founded a thread interesting with good detachment of user Akuma and mayb s useful for you:
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=136549If it doesn t work I think you need assistance from an authorized service provider. Technicians can check your laptop and fix it if necessary s.
Good luck!
-
HP DL380 G4: Download driver HP DL380 G4 - could not open page error
I want to download the driver for HP DL380 G4, for 32-bit Windows Server. Driverpage selecting OS site returns with the error:
Could not open page
The service or the information requested is not available at this time.
Please try again later.(Error: system-websrv_unavail)
Please try again, I just tried the website and page pilot is appeared:
http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=426678&swLangOid=8&swEnvOid=1005
-
Cannot open websites, error DNS when the ping command cannot resolve the name
Cannot open all websites on a PC. (other computers on the network can access the sites without a problem)
Error message is "Internet Explorer cannot display webpage."I can ping (internal and external) of the IP and gateway addresses.
Ping translates:
C:\>ping www.yahoo.com
Ping request could not find host www.yahoo.com. Please check the name and try again.Nslookup translates:
C:\>nslookup www.yahoo.com
Can not find the name of the server for the address 192.168.0.1: non-existent domain
Default servers are not available
Server: unknown
Address: 192.168.0.1Non-authoritative answer:
Name: www-real.wa1.b.yahoo.com
Address: 69.147.76.15
Alias: www.yahoo.com, www.wa1.b.yahoo.comPathping translates:
C:\>Pathping www.yahoo.com
Unable to resolve target system name www.yahoo.com.The problem occurs on a wired and wireless connection.
Reset TCP/IP via netsh int ip reset c:\ressetlog.txt results in the following in the log file error message:discount Linkage\UpperBind for USB\VID_0B05 & PID_1723\5 & 2461925A & 0 & 5. incorrect value was:
REG_MULTI_SZ =
SymIMIs there a total of 9 errors in the log similar to the one above.
The host file has only 127.0.0.1 in there.
Clearing the cache of the arg, flushing the DNS and do a repair on the network connection does not resolve the problem.
Install a new network device does not resolve the problem.
I also deleted all the antivirus software and security, including firewalls.
The Windows Firewall is disabled.
Boot in safe mode with Networking does not solve the problem.
Running Winsockfix does not solve the problem.
Internet Explorer 8 (reset web settings has been done)
Windows XP Media Center with SP3
Execution of the IE Diagnostics results in an error 12007 the server name or address cannot be resolved.Get the end of the line...
Any other ideas?
Thank you
Larry
Sorry for the late reply, but I did not have access to the MS Web site for a few months.
I tried your suggestions, they do not work.
The resolution is to do a repair of the operating system out of the CD. Who cleared up the problem.
Thank you
Larry
-
Adobe Reader does not work, the patch could not be opened. Error code 103
original title: adobe reader software
I have a windows xp and ie 8 and when I go to print a statement of a biller, the error code is 103:103 and it says that your adobe reader software does not have the patch cannot be opened. check that there is and that you can access.
I suggest to uninstall Adobe Reader and get a nice drive more Windows such as this. I dropped Adobe years ago. Nothing but headaches.
Foxit Reader
http://www.foxitsoftware.com/PDF/reader/ -
'Open doors' error on HP OfficeJet 6600
Hello
I have a printer HP OfficeJet 6600. After I changed the 932XL with a new black print cartridge (original), I get an error: door open, with the message: "the door or lid should be closed to print. Make sure it is completely closed. »
I checked the front and rear, door as well as the top cover (copy/scan), and all of them are CLOSED
Any help? Any clue? Any idea?
Thank you
CAT
Yes. I solve the problem, but in a way no, proffesional.
I discovered that, when changing the black cartridge, a small pin located in the upper right of the front door, was broken (reliability?, quality?).
Then I discovered that the PIN around which the Panel is rotating... is not only a PIN (hinge), but, if it is pushed in (horizontal movement) can act as a sensor push-pull. I stuck the "pin" with a small piece of paper o, I closed the door (with the broken ankle and... it works.)
Hope that my non-professional explanation has been authorized.
Kind regards
Catalin
-
Microsoft works 8 calendar won ' t open, the error message received
The Microsoft Works 8 calendar was working fine Sunday / Monday. My husband had surgery Tuesday, I checked my mails but did not notice the lack
"reminder" pop-up. I got a call today, said I missed a meeting yesterday. "I tried the program through"All programs"opening and just get an error code indicating Mocrosoft has encountered an error and needs to close." The same code appears when I start my computer. I presume because they cannot automatically open the program.
Hello
I suggest you to see link below and check if it helps.
http://support.Microsoft.com/kb/913190
If the problem persists then I suggest you send your query in the link below.
http://answers.Microsoft.com/en-us/Office/Forum/office_other
-
Original title: msg error Searchsettings & bad Image problem
How to solve the search parameters & bad image of my windows XP error message? Whenever I start my Windows I have error of search parameters, and if I try to open some applications like YM or CHROME or all the other apps, I received the following message.
DLL C:\WINDOWS\system32\mmebaetf.dll. It's so disturbing. Please help me solve this.With respect,
Rosaline.Hello Rosaline48,
Thanks for the return of the response. Have you tried to boot safe mode to see if you can reproduce this error when you try to open any program? You have scanned your computer for malware or viruses?
Safe mode:
Last good known Configuration:
http://Windows.Microsoft.com/en-us/Windows-Vista/using-last-known-good-configuration
Maybe you are looking for
-
Can I use the appliance without a phone plan?
Can I use this device with/without a phone plan
-
Re: error iTunes burn the CD - R on the satellite
Hello I can also burn on CDR disc using iTunes.Almost as soon as I bought the Toshiba Equium, which was in March this year, I discovered this error message. Some stores don't seem to know this error. However, I can download to CD - RW, but it's not g
-
Audio jumpy on Satellite P100-347
Hello I just bought this laptop and I am very disappointed that I can't get the audio to work correctly. I have been using various media (windows media, foobar, winamp player) players and every now and again the sound will jump a little. I noticed wh
-
I would like to copy the new files (and only new files) created on an external disk in a backup on my computer. Is there an app that I can use for this?
-
Is there a way to check if my disk cleanup is working properly?
When I do a disk cleanup, it tells me something about sending errors to Microsoft? one old man was cleaning my drive... it works correctly or?