NB550D-111 - can't change the display resolution after installing Win7 Pro

Similar Questions

• Stuck in low resolution, 640 x 480. I can't change the display resolution

  HP Pavlion p7 - 1247c. I'm stuck at 640 x 480. I can get to the resolution setting change, but the display setting is grayed out so I'm stuck at 640 x 480. I can boot into safe mode and I can't change resolution while in mode without failure, but not when I boot normally. I tried a system restore how it was first delivered to me. I can't complete the initial installation, because I'm in 640 x 480 and I can't see or click on the button continue because it's off the screen.  I found there a boot at low resolution option which is where I seem to be stuck. I can't find a way to disable the start-up at low resolution. In addition, it seems that initial Setup requires a wide aspect ration monitor. This does not work with my old monitor who will be 1280 x 1024, but is stuck at 640 x 480.

  Looks like I finally figured it was the DVI cable that shipped with the computer. I swapped the cable with another computer and now it works.

  I guess I should be happy to have solved the problem, but I'm not. Perhaps because the solution was too simple and it took me so long to try it.

  I delivered the computer back to HP for no reason, they replaced the motherboard for no reason. I lost a lot of my time for no reason. I lost the time of four different technical support.

  I think the real reason I tried swapping the cable is the last tech support guy said that he would not be the cable. This proves just that sometimes it's the easiest part of the whole system that can cause the most problems.

  If one HP had shipped a good cable in the first place.  :-(

• How to change the display resolution of APEX?

  Hi guys,.
  
  How to change the display resolution of APEX?
  In other words, if an end-user sees large elements on a page, then it zoomed out there... How can I define a good zoom LENS for my default application...
  
  I hope that my question is simple...
  Kind regards
  Fateh

  Fateh says:

  I hope that my question is simple...

  Nope.

  How to change the display resolution of APEX?

  APEX is not a resolution of the screen. 'Screen resolution' is a property of the device, user agent software used to view the page APEX.

  What do you mean by "resolution of the screen of the APEX?

  In other words, if an end-user sees large elements on a page

  What "big items?

  then it the zoom out

  How?

  "Zooms", what - the whole page or 'big one '?

  How can I define a good zoom LENS for my default application...

  Which means what?

  And as usual, we are missing:

• Full version of APEX
  
• Complete operating system DB, version, edition, host
  
• Architecture of Web server (EPG, SST or APEX listener/host operating system)
  
• Browser (s) and version (s) used
  
• Theme
  
• Model (s)
  
• Region/item (s)

  You have been posting here for years. You know this basic information is needed to understand and reproduce problems.

  If you need help it does not seem unreasonable that you made the effort to provide a complete, clear but a concise description of the problem or need.

• How can I change the display order of the masters in the Pages of the CC Panel 2015?

  How can I change the display order of the masters in the Pages of the CC Panel 2015?

  When you drag the master page icon upwards or downwards, look at the horizontal to appear, and then release.

• How can I change the display of Web sites

  How can I change the size of the fonts/display of websites when using Firefox as my browser?

  The most reliable way to do everything more or less is to use the Firefox zoom feature. If you hold down the Ctrl key with your left hand and press on the + and - keys with your right hand you can see this in action. Or you can hold down the Ctrl key and scroll the mouse wheel. To restore the default level, hold the CTRL and press 0 (zero).

  If you find that you need to zoom in each site, you can use an add-on to set your preferred default zoom level. Here are two that have been around for a while:

  • Default FullZoom Level
  • NoSquint

  After setting your overall zoom level, you can still adjust the zoom on various sites using the standard Firefox zoom feature.

  Now... who could not all changes you want to see addressed. Could you explain more in detail everything that needs fixing?

• Satellite A200 - 14 d: how many times can I change the screen resolution

  I would like to ask if often resolution change may damage the screen of my Satellite A200 - 14 d?

  Because now I'm programming in Assembly in resolution 640 x 480, and whenever I run a program, the screen should change its 1280 x 800 to 640 x 480 resolution, and it takes 1-2 seconds: it is empty, the backlight turns off, then the new resolution appears. I would like to ask if it permanently (often) could damage my LCD?

  Thank you.

  Don't worry man, it will not damage the screen ;)
  You can change the screen resolution often unhesitatingly ;)

• How can I change the display settings for the lifecam VX-2000 software provide a mirror image?

  I've tried everything and looked everywhere online.  Can you help me?

  Hi ToniDanile,

  You can change the display settings for the LifeCam software to fix the problem.

  For more information see the article mentioned below:

   

  Don't troubleshoot bad or no video or problems to start the LifeCam software

  http://support.Microsoft.com/kb/933310

  Let us know if it helps.

• How can I change the password in a new Mc Pro.

  How can I change the password in new Mc Pro.

  Is there a button right in the Mc Pro touchpad

  How can I change the password in new Mc Pro.

  Read https://support.apple.com/kb/PH21765

  Is there a button right in the Mc Pro touchpad

  Yes, if you use a Magic Trackpad make your selection as follows

  

  You might find the gesture of tap two fingers easier to use though, so try it both ways.

• How can I change the screen resolution

  I have the resolution on my computer correctly set. When I click on Firefox, the images are too big (bad resolution). How I put it to the correct resolution? I have my computer fixed at 1650 X 1080.

  Reset the zoom of page on pages that are causing problems.

  • View > Zoom > reset (Ctrl + 0 (zero); 0 + Command on Mac)
  • http://KB.mozillazine.org/Zoom_text_of_web_pages

  You can set the layout.css.devPixelsPerPx pref on the topic: config page on 1.0 or Windows 8 to 1.25 and if necessary adjust layout.css.devPixelsPerPx from 1.0 to 0.1 or 0.05 steps (1.1 or 0.9) do the icons to display properly.

  • http://KB.mozillazine.org/about:config

  See also:

  • https://support.Mozilla.org/KB/Forum-response-zoom-feature-on-Firefox-22

  An extension allows you to adjust the size of the text in the user interface and zoom the page in the browser window.

  You can watch this extension to adjust the font size for the user interface.

  • Theme font & size changer: https://addons.mozilla.org/firefox/addon/theme-font-size-changer/

  You can watch the Default FullZoom Level or NoScript extension if the web pages need to be adjusted after the change of layout.css.devPixelsPerPx.

  • Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/
  • NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/

• Re: Satellite A350D-114 - how to change the display resolution?

  Hello

  I have Toshiba Satellite A350d 114. The screen resolution is 1366 x 768.
  But I want to change for example 1280 x 1024, but I can't.
  I wish I had a longer high reolution (768 above).
  What should I do for this?

  Thanks for the replies.

  Piotr

  Vasja is right. You should offer more information.
  When you buy laptop and use it with the settings of the right display driver is pre-installed and the resolution of the screen on the right will be defined by default.

  So the question is: what you do or what you've done with your laptop? with the right display driver, you should be able to use the waterproof display resolution.

• Hi, how can I change the screen resolution?

  I keep saying to change the resolution of the screen but don't know how to proceed and would appreciate some advice before doing the wrong thing.

  Hello

  I don't think there is a problem with Firefox, but I got a peek inside and I think I'm able to help.

  The screen resolution is a Windows 8 setting you need to change. I found this walk through (with screenshots) that should help you.

  I hope this helps, but if not, please come back here and we can look at another solution for you.

• How to change the display resolution?

  I have Del E1505. The screen resolution is 1280 X 800, when I bought the laptop. I changed it in 1680 X 1050. It has been 3 years and worked well. Now I think it's too small. I want to go back to 1280 X 800. But it doesn't have this option. How to add mode 1280 X 800? (I can't see this mode in the list of all the attributes).

  
  

• How can I change the display of search results format?

  My default folder view is "details" for all folders. But search results always happens to "Tiles", which makes me go to discover details manually I have to search for a file each time. Is there an easy way to change the default display of search results?

  To remember. Try to remove all the parameters.
  Menu Tools (on the keyboard ALT + T) - Folder Options - view - reset records
  --
  ..
  --
  "Teun Spaans" wrote in message news: 7eca660e-c0c7-4 c 58-abfa-ff558257bbe8...
  > My default folder view is "details" for all folders. But still
  > search results comes to "Tiles", which makes me go to the details view
  > manually whenever I have to search for a file. Y at - it an easy way to change the
  > default search results display?

• How can I change the display of the name of our community

  I want to change the full name of our community, but don't know how. can change at all?

  As community administrator, you have many options of customization of the community, to change the Visual theme of the site to change community privacy policies.

  Socialcast uses the name of the brand community emails sent to users in the community.

  To upload a logo file customized, click Admin > theme.  To change your community name, go to Admin > settings.

  If you decide not to download a custom logo image, Socialcast will use the name of the community as a default logo in the upper left corner of each page.

• How can I change the display of the analog clock on the screen today?

  My clock shows like anaglog on screen today. How can I change? At the same time he was showing digital. Also, screen saver, time is two digits when the time is 07:00 (it shows 07:00) how can I change this?

  It makes me neurotic!

  You would just press on and hold down and choose analog or digital on screen clock today to switch between digital and analog