Need a sql script loader to load data into a table

Similar Questions

• SQL Loader loading data into two Tables using a single CSV file

  Dear all,

  I have a requirement where in I need to load the data into 2 tables using a simple csv file.

  So I wrote the following control file. But it loads only the first table and also there nothing in the debug log file.

  Please suggest how to achieve this.

  Examples of data

  Source_system_code,Record_type,Source_System_Vendor_number,$vendor_name,Vendor_site_code,Address_line1,Address_line2,Address_line3

  Victor, New, Ven001, Vinay, Vin001, abc, def, xyz

  Control file script

  ================

  OPTIONS (errors = 0, skip = 1)
  load data
  replace
  in the table1 table:
  fields ended by ',' optionally surrounded "" "
  (
  Char Source_system_code (1) POSITION "ltrim (rtrim (:Source_system_code)),"
  Record_type tank "ltrim (rtrim (:Record_type)),"
  Source_System_Vendor_number tank "ltrim (rtrim (:Source_System_Vendor_number)),"
  $vendor_name tank "ltrim (rtrim (:Vendor_name)),"
  )
  in the Table2 table
  1 = 1
  fields ended by ',' optionally surrounded "" "
  (
  $vendor_name tank "ltrim (rtrim (:Vendor_name)),"
  Vendor_site_code tank "ltrim (rtrim (:Vendor_site_code)),"
  Address_line1 tank "ltrim (rtrim (:Address_line1)),"
  Address_line2 tank "ltrim (rtrim (:Address_line2)),"
  Address_line3 tank "ltrim (rtrim (:Address_line3)).
  )

  the problem here is loading into a table, only the first. (Table 1)

  Please guide me.

  Thank you

  Kumar

  When you do not provide a starting position for the first field in table2, it starts with the following after a last referenced in table1 field, then it starts with vendor_site_code, instead of $vendor_name.  So what you need to do instead, is specify position (1) to the first field in table2 and use the fields to fill.  In addition, he dislikes when 1 = 1, and he didn't need anyway.  See the example including the corrected below control file.

  Scott@orcl12c > test.dat TYPE of HOST

  Source_system_code, Record_type, Source_System_Vendor_number, $vendor_name, Vendor_site_code, Address_line1, Address_line2, Address_line3

  Victor, New, Ven001, Vinay, Vin001, abc, def, xyz

  Scott@orcl12c > test.ctl TYPE of HOST

  OPTIONS (errors = 0, skip = 1)

  load data

  replace

  in the table1 table:

  fields ended by ',' optionally surrounded "" "

  (

  Char Source_system_code (1) POSITION "ltrim (rtrim (:Source_system_code)),"

  Record_type tank "ltrim (rtrim (:Record_type)),"

  Source_System_Vendor_number tank "ltrim (rtrim (:Source_System_Vendor_number)),"

  $vendor_name tank "ltrim (rtrim (:Vendor_name)).

  )

  in the Table2 table

  fields ended by ',' optionally surrounded "" "

  (

  source_system_code FILL (1) POSITION.

  record_type FILLING,

  source_system_vendor_number FILLING,

  $vendor_name tank "ltrim (rtrim (:Vendor_name)),"

  Vendor_site_code tank "ltrim (rtrim (:Vendor_site_code)),"

  Address_line1 tank "ltrim (rtrim (:Address_line1)),"

  Address_line2 tank "ltrim (rtrim (:Address_line2)),"

  Address_line3 tank "ltrim (rtrim (:Address_line3)).

  )

  Scott@orcl12c > CREATE TABLE table1:

  2 (Source_system_code VARCHAR2 (13),)

  3 Record_type VARCHAR2 (11),

  4 Source_System_Vendor_number VARCHAR2 (27),

  5 $vendor_name VARCHAR2 (11))

  6.

  Table created.

  Scott@orcl12c > CREATE TABLE table2

  2 ($vendor_name VARCHAR2 (11),)

  3 Vendor_site_code VARCHAR2 (16).

  4 Address_line1 VARCHAR2 (13),

  5 Address_line2 VARCHAR2 (13),

  Address_line3 6 VARCHAR2 (13))

  7.

  Table created.

  Scott@orcl12c > HOST SQLLDR scott/tiger CONTROL = test.ctl DATA = test.dat LOG = test.log

  SQL * Loader: release 12.1.0.1.0 - Production on Thu Mar 26 01:43:30 2015

  Copyright (c) 1982, 2013, Oracle and/or its affiliates.  All rights reserved.

  Path used: classics

  Commit the point reached - the number of logical records 1

  TABLE1 table:

  1 row loaded successfully.

  Table TABLE2:

  1 row loaded successfully.

  Check the log file:

  test.log

  For more information on the charge.

  Scott@orcl12c > SELECT * FROM table1

  2.

  RECORD_TYPE SOURCE_SYSTEM_VENDOR_NUMBER $VENDOR_NAME SOURCE_SYSTEM

  ------------- ----------- --------------------------- -----------

  Victor Ven001 new Vinay

  1 selected line.

  Scott@orcl12c > SELECT * FROM table2

  2.

  $VENDOR_NAME VENDOR_SITE_CODE ADDRESS_LINE1 ADDRESS_LINE2 ADDRESS_LINE3

  ----------- ---------------- ------------- ------------- -------------

  Vinay Vin001 abc def xyz

  1 selected line.

  Scott@orcl12c >

• Load data into a table

  Hi friends,

  I'm trying to load records into the rules of the product table of the table with the following...

  create table product)

  prod_id varchar2 (20).

  prod_grp varchar2 (20).

  from_amt number (10),

  to_amt number (10),

  share_amt number (10)

  );

  Insert into product (prod_id, prod_grp, from_amt, share_amt) Values ('10037', "STK", 1, 18);

  Insert into product (prod_id, prod_grp, from_amt, share_amt) Values ('10037', "NSTK", 1: 16.2);

  Insert into product (prod_id, prod_grp, from_amt, to_amt, share_amt) Values ('10038', "NSTK", 1, 5000, 12);

  Insert into product (prod_id, prod_grp, from_amt, to_amt, share_amt) Values ('10038', "STK", 5001, 10000, 16);

  Insert into product (prod_id, prod_grp, from_amt, share_amt) Values ('10038', "STK", 10001, 20);

  Insert into product (prod_id, prod_grp, from_amt, to_amt, share_amt) Values ('10039', "NSTK", 1, 8000, 10);

  Insert into product (prod_id, prod_grp, from_amt, share_amt) Values ('10039', "STK", 8001, 12);

  create table rules)

  rule_id varchar2 (30),

  rule_grp varchar2 (10),

  rate_1 number (10),

  point_1 number (10),

  rate_2 number (10),

  point_2 number (10),

  rate_3 number (10),

  point_3 number (10)

  );

  Criteria of loading in the rules of the table:

  rule_id - "RL" | Product.prod_id

  rule_grp - product.prod_grp

  rate_1 - product.share_amt where from_amt = 1

  point_1 - product.to_amt

  rate_2 - if product.to_amt in point_1 is not NULL, then find product.share_amt of the next record with the same rule_id/prod_id where from_amt (of the next record) = to_amt (current record -

  point_1) + 1

  point_2 - if product.to_amt in point_1 is not NULL, then find product.to_amt of the next record with the same rule_id/prod_id where from_amt (of the next record) = to_amt (current record - )

  point_1) + 1

  rate_3 - if product.to_amt in point_2 is not NULL, then find product.share_amt of the next record with the same rule_id/prod_id where from_amt (of the next record) = to_amt(current )

  Enregistrement-point_2) + 1

  point_3 - if product.to_amt in point_2 is not NULL, then find product.to_amt of the next record with the same rule_id/prod_id where from_amt (of the next record) = to_amt (current record - )

  point_2) + 1

  I tried to load the first columns (rule_id, rule_grp, rate_1, point_1, rate_2, point_2) via the sql loader.

  SQL > select * from product;

  PROD_ID PROD_GRP FROM_AMT TO_AMT SHARE_AMT

  -------------------- -------------------- ---------- ---------- ----------

  10037                STK                           1                    18

  10037                NSTK                          1                    16

  1 5000 12 NSTK 10038

  10038 5001-10000-16 STK.

  10038 10001 20 STK.

  10039 1 8000 10 NSTK

  10039                STK                        8001                    12

  produit.dat

  PROD_ID | PROD_GRP | FROM_AMT | TO_AMT | SHARE_AMT

  "10037' |'. STK' | 1. 18

  "10037' |'. NSTK' | 1. 16.2

  '10038' |' NSTK' | 1. 5000 | 12

  '10038' |' STK' | 5001 | 10000 | 16

  '10038' |' STK' | 10001 | 20

  "10039' |'. NSTK' | 1. 8000 | 10

  "10039' |'. STK' | 8001 | 12

  Product.CTL

  options (Skip = 1)

  load data

  in the table rules

  fields ended by ' |'

  surrounded of possibly ' '.

  trailing nullcols

  (rule_id POSITION (1) ""RL"|: rule_id")

  rule_grp

  from_amt BOUNDFILLER

  point_1

  share_amt BOUNDFILLER

  , rate_1 ' BOX WHEN: from_amt = 1 THEN: share_amt END.

  , rate_2 expression "(sélectionnez pr.share_amt de produit pr où: point_1 n'est pas null et pr.prod_id=:rule_id et: point_1 =: from_amt + 1)" "

  , expression point_2 "(sélectionnez pr.to_amt de produit pr où: point_1 n'est pas null et pr.prod_id=:rule_id et: point_1 =: from_amt + 1)" "

  )

  He has not any support only values in rate_2, point_2... no error either... Not sure if there is another method to do this...

  Please give your suggestions... Thank you very much for your time

  Hello

  Thanks for posting the CREATE TABLE and INSERT instructions for the sample data; It's very useful!

  Don't forget to post the exact results you want from this data in the sample, i.e. what you want the rule table to contain once the task is completed.

  As ground has said, there is no interest to use SQLLDR to copy data from one table to another in the same database.  Use INSERT, or perhaps MERGE.

  2817195 wrote:

  Thank you for your answers... I thought it would be easier to manipulate the data using sql loader... I tried to use insert but do not know how to insert values in point_2, rate_3, rate_2, point_3, columns... For example, when point_1 is not null, need to do a find for the next with the same rule_id record and if the inserted record = pr.from_amt + 1 point_1 then RATE_2 should be inserted with this pr.share_amt of this record...

  SQL > insert into the rules)

  2 rule_id,

  rule_grp 3,.

  rate_1 4,.

  point_1 5,.

  rate_2 6,.

  point_2 7,.

  rate_3 8,.

  9 point_3)

  10. Select

  11 'RL ' | PR.prod_id RULE_ID,

  12 pr.prod_grp RULE_GRP,

  13 CASES WHEN END of pr.from_amt = 1 THEN pr.share_amt RATE_1,

  14 pr.to_amt POINT_1,

  15 (select pr.share_amt from product pr where point_1 is not null and rules.rule_id = pr.prod_id and point_1 = pr.from_amt + 1) RATE_2,

  16 (select pr.to_amt from product pr where point_1 is not null and rules.rule_id = pr.prod_id and = pr.from_amt + 1 point_1) POINT_2,.

  17 (select pr.share_amt from product pr where point_2 is not null and rules.rule_id = pr.prod_id and = pr.from_amt + 1 point_2) RATE_3,.

  18 (select pr.to_amt from product pr where point_2 is not null and rules.rule_id = pr.prod_id and = pr.from_amt + 1 point_2) POINT_3

  19 product pr;

  (select pr.share_amt from product pr where point_1 is not null and point_1 = pr.from_amt + 1) RATE_2,

  *

  ERROR on line 15:

  ORA-00904: "POINT_1": invalid identifier

  Help, please... Thank you very much

  This is what causes the error:

  The subquery on line 15 references only 1 table in the FROM clause, and this table is produced.  There is no point_1 column in the product.

  A scalar subquery like this can be correlated to a table in the Super request, but the only table in the FROM (line 19) clause is also produced.  Since the only table that you read is produced, only columns that you can read are the columns of the product table.

  You use the same table alias (pr) to mean different things 5. It's very confusing.  Create aliases for single table in any SQL statement.  (What you trying to do, I bet you can do without all these subqueries, in any case.)

• How to load data into the table of correspondence in OIM 11 g

  Hello
  I have a lot of data that must be loaded into the table of choice as Codekey and decode. How can I load the data in bulk instead of manually via console Design?
  
  Is it possible to do? No API IOM or any what SQL query
  
  Kind regards
  JS

  Here's what you need to get.

  psLookupCode - search name,
  psValue - Code key
  psDescriptivevalue - DecodeKey

  The rest can be empty.

  addLookupValue

  void addLookupValue (java.lang.String psLookupCode,
  java.lang.String psValue,
  java.lang.String psDescriptiveValue,
  java.lang.String psLanguage,
  java.lang.String psCountry)
  throws Thor.API.Exceptions.tcAPIException,
  Thor.API.Exceptions.tcInvalidLookupException,
  Thor.API.Exceptions.tcInvalidValueException,
  tcAPIException adds a new entry for the specified search

  Parameters:
  psLookupCode - the Code for the definition of research
  psValue - the value that will be stored in the database
  psDescriptiveValue - a descriptive version of the value to be added
  psLanguage - the language for the added entry. Leave blank to accept the default value (en)
  psCountry - country for the specified entry. Leave blank to accept the default (US)

  Throws: tcAPIException tcInvalidLookupException - thrown if the search Code is no tcInvalidValueException - thrown if the value cannot be added to the list of choices (because it's a double, etc.)

  M

• Load data into a table from two sources

  I developed an interface that has tables of the source of a source database that contains data of 4 companies. (we have multiple servers for different companies). Now, there is a requirement to load the data to another company in the same data warehouse. The problem is that the source is on another server. The database structure is the same. The names of tables, constraints are the same.

  I can't just duplicate my previous interface and change the data source to this interface. -Does anyone know how to do this. I have about 50 + such interface of re - developing another interface is quite a tedious task.

  Hello

  Here are links to examples of the context, in the examples they use development and Production environments in order to demonstrate the different environments.  In your project, it will be the different companies.  Create a context for each company, provided that the scheme remains the same across companies.

  https://blogs.Oracle.com/dataintegration/entry/executing_the_same_code_in_all

  Context, physical and logical schema - how does it work? -ODIExperts.com

  http://www.odigurus.com/2011/10/ODI-contexts.html

  Thank you

  ARV

• Loading data into the table by file name

  Hi all
  
  I am new to ODI. I have a requirement of loading a flat file in oracle, as well as the name of the file in a single column of the table. This means that, if there are 10 rows of data from this file, then the extra column "FileName" to the table will be the name of the active file written 10 times. Please suggest how this can be achieved. I am able to do half of it but the file name is not filled.
  
  Thank you.

  Hello

  See the link below for dynamic fair value can be useful for you

  http://blogs.Oracle.com/dataintegration/2009/04/using_parameters_in_odi_the_dy_1.html

  Thank you
  Merlina.

• org.apache.bsf.BSFException loading data into Essbase

  What I try to do is to load data into Oracle's Essbase?
  The operator-> all executions
  Integration to prepare for loading (success)
  Load data integration into essbase (failed) with the below error
  
  
  org.apache.bsf.BSFException: exception of Jython:
  Traceback (innermost last):
  "< String >" file, line 23, in there?
  com.hyperion.odi.essbase.ODIEssbaseException: error reached records the maximum error threshold: 1 at com.hyperion.odi.essbase.ODIEssbaseDataWriter.loadData (unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at org.python.core.PyReflectedFunction.__call__ (PyReflectedFunction.java) at org.python.core.PyMethod.__call__ (PyMethod.java) at org.python.core.PyObject.__call__ (PyObject.java) at org.python.core.PyInstance.invoke (PyInstance.java) at $0 org.python.pycode._pyx35.f (< string >: 23) to org.python.pycode._pyx35.call_function (< string >) to the org.python.core.PyTableCode.call (PyTableCode.java) at org.python.core.PyCode.call (PyCode.java) at org.python.core.Py.runCode (Py.java) at org.python.core.Py.exec (Py.java) to (PythonInterpreter.java) org.python.util.PythonInterpreter.exec to org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:144) to com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.execInBSFEngine(SnpScriptingInterpretor.java:345) to com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.exec(SnpScriptingInterpretor.java:169) to com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java:2375) to com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java:1616) to com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java:2755) to com.sunopsis.dwg.dbobj.SnpSessTaskSqlI.treatTaskTrt(SnpSessTaskSqlI.java:69) to com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2515) to com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:537) to com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:449) to com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1954) to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$ 2.doAction(StartSessRequestProcessor.java:322) to oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:224) to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:246) to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$ 0 (StartSessRequestProcessor.java:237) to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$ StartSessTask.doExecute (StartSessRequestProcessor.java:794) at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:114) at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$ 2.run(DefaultAgentTaskExecutor.java:83) at java.lang.Thread.run (Thread.java:619) caused by: com.hyperion.odi.essbase.ODIEssbaseException: error reached records the maximum error threshold: 1 at com.hyperion.odi.essbase.ODIEssbaseDataWriter.checkMaxError (unknown Source) at com.hyperion.odi.essbase.ODIEssbaseDataWriter.sendRecordArrayToEsbase (unknown Source)... 35 more
  com.hyperion.odi.essbase.ODIEssbaseException: com.hyperion.odi.essbase.ODIEssbaseException: error reached records the maximum error threshold: 1
  
  at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
  at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.execInBSFEngine(SnpScriptingInterpretor.java:345)
  at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.exec(SnpScriptingInterpretor.java:169)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java:2375)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java:1616)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java:2755)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSqlI.treatTaskTrt(SnpSessTaskSqlI.java:69)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2515)
  at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:537)
  at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:449)
  at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1954)
  to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$ 2.doAction(StartSessRequestProcessor.java:322)
  at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:224)
  at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:246)
  to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$ 0 (StartSessRequestProcessor.java:237)
  to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$ StartSessTask.doExecute (StartSessRequestProcessor.java:794)
  at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:114)
  to oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$ 2.run(DefaultAgentTaskExecutor.java:83)
  at java.lang.Thread.run(Thread.java:619)

  I don't really understand what's your problem, you should not need to do anything once it is executed, the interface if records have loaded, then they should be in essbase, if they are rejected, then the error should give you an idea of why they were.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Load data from one table into another table of 2 different schemes

  Hello

  We have a requirement to insert data into a table in a schema of a table that is in other schemas in ODI.

  We are able to do so by creating interfaces and mappings. But we now expect to do using SQL instead of ODI interfaces.

  Is it possible to do this using the SQL statements we have source and target data sources defined in ODI.

  should be like "Insert into src.table select * from tar.table'"

  Thank you...

  Hello

  If you try to load a db to another db using sql (sql free hand) instead of interfaces instructions.

  It is possible using procedures odi too.

  1. Select the project (designer navigator) odi mode

  2. create the new procedure. Then add the command.

  in this command on the source command on the tabs of the target.

  Enter the sql statements. See the screenshots below...

  

  

  I think this will help for you,

  Thank you best regards &,.

  A.Kavya

• How to load data into the App MVDEMO schema example

  Hi all

  I'm a POC on Oracle Mapviewer and try to build some reports in OBIEE using MApviewer.

  This POC, I use Oracle MVDEMO example Data (11g). I think that these sample data covers few countries like the USA.

  I need to make PDS for the Brazil, I downloaded data from the map of the site as Shapefiles Brazil

  http://GADM.org/country

  in these data of the Brazil, I got from .csv files 4 extensions, .dbf, .shp and SHX

  I need to know how can I load these files into my Oracle 11 g DB? Should I load data into the same pattern of mvdemo, if yes then which table?

  Any help will be appreciated a lot.

  Thank you

  Amit

  Use the Java shapefile Converter utility (http://www.oracle.com/technetwork/database/options/spatialandgraph/downloads/index-093371.html)

  GDAL (gdal.org) FME (Safe) or or MapBuilder.

  Specify the to SRID (i.e. the SRID for loading in Oracle geoms) 4326 or 8307.

  Load into a new table named anything you want. for example brazil_gadm with the geometry named GEOMETRY column

  Once it's loaded, verify that there is an entry for the table and column (BRAZIL_GADM, GEOMETRY) in user_sdo_geom_metadata

  Create a space on brazil_gadm.geometry index if the tool has not created a.

  Add the definitions of topic for the country, State or whatever the admin areas exist in the dataset.

  Import them as layers in OBIEE.

• URGENT: How to load data into essbase R12 by ODI

  Hi all

  Could you please provide me with step by step document "How to load data into essbase R12 directly through the ODI".

  Kind regards

  Rubi

  Hello

  You need below KM

  RKM E-Business Suite

  IKM E-Business Suite (open Interface)

  then follow the link below

  Red shift: ODI for eBusiness Suite integration - in 4 steps

  Hope it helps

  Thank you

• Loading data into the APEX problem

  Hello world...
  
  I am new to Oracle APEX and I am facing problems loading the data into the table. My problem is the text data are load with double quotes.
  
  Please suggest.
  
  Thank you
  Suresh

  Hello

  assuming that you load the data via the UI APEX via home > SQL Workshop > utilities > data workshop > Load Data
  By also provide more information like the version used, APEX how/where you download data, etc.

  If you put your data in a file and select ' 'Download the file (separated by commas or tabs' then on the next screen, you can field 'Optionally Enclosed By' in double quotes ("").
  This should remove the double quotes of the data during the import.

  Concerning
  Bottom

• A trial is possible before loading data into Essbase?

  Hi all
  
  I am trying to load data into Essbase, but I need to check in advance for any errors. Is there a way to test vacuum as we do in planning of loading utility?
  
  I am trying to load via a rule file!

  This thread comes to mind:
  http://www.Network54.com/Forum/58296/thread/1311019508/data+load+optimization+-headervs + column

  I try to stay away from my most entertaining reviews that it simply raises my bp.

  I would say that Essbase databases with incorrect data are the Essbase databases causing a lot of grief. I think that the OP certainly has the right idea, I don't think that the place to do so is Essbase.

  :)

  Kind regards

  Cameron Lackpour

  P.S. If it is a database of the OSB, I like your idea of a fictitious scenario, then a replacement of rule of load (groan) to move the data of this scenario, but even with a WHOLE CLEARBLOCK which will create a fragmentation.

  Published by: CL on August 30, 2011 14:31
  Well, the red stuff is in our veins, you know the stuff that carry oxygen to our body. That starts with a 'b' and ends with a "d"? This word is prohibited through OTN. As well as leather things you put on your feet. So weird. I had to post four times to understand what was get arrested.

• Cannot load data into Essbase using ODI

  Hi guys,.
  
  Help help. I have problem loading data into essbase using ODI. The error message is
  java.sql.SQLException: unexpected token: ACCOUNT in the statement [select C1_ACCOUNT "" account]
  
  I have a very simple flat file that are similar to the below:
  
  Account, resources, time, data
  Active, Na_Resource, Jan, 10
  Active, Na_Resource, 12, February
  
  With the same flat files, I am able to load data to load rules.
  
  
  I use 9.3.1.0 and ODI 10.1.3.4.0 essbase. I use the ODI to load members and data in the planning without any problem.
  
  
  Thank you

  Hello

  It seems to generate an extra set of quotation marks around the SQL, in my interface it generates.

  SQL = "" "select C1_ACCOUNT 'Account', C2_PERIOD 'Period', C3_RESOURCE 'Resource', C4_DATA 'Data' of the" C$ _0TestApp_testData "where (1 = 1) «»

  Note the single quotes around the account.

  If you go to the topology Manager, on the tab of the physical architecture, right-click 'Hyperion Planning' > 'change '.
  Select the "Langugage" tab for the "JYTHON" line, make sure that the "Object Delimiter" field has no quotes, if it's remove and apply and save.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Loading data into Essbase by FDM

  Dear Guru,
  
  Can someone provide any document or Pdf associated with loading data into Essbase by FDM?
  
  Thanks in advance...

  Hello
  I found a couple of days now. Seemed quite useful.
  http://www.Scribd.com/doc/61656853/configuring-FDQM-for-Hyperion-Planning

  See you soon,.
  Alp

• ODI can load data into the planning and REPLACE the existing data?

  Hello
  ODI (9.3.1.1) can load data into the planning and REPLACE the existing data?
  Currently of our ODI by "ADD" load to existing data data - so that is I accidentally run the load twice, it would be double planning numbers. I don't know how to do it to REPLACE so that running more than twice has no effect.

  With the help of the essbase adapter you would use a rule of load, in the State of charge, you can set whether to replace or add to existing values. It is not difficult to pass.

  See you soon

  John
  http://John-Goodwin.blogspot.com/