Need advice on setting up my new SSD with a HHD

Similar Questions

• Microsoft Account closed, but cannot set up a new one with the same e-mail address

  On his brand new Dell laptop, my wife has Microsoft Windows 8, but decided to close it after the establishment because she didn't see the need for it. Now the laptop screen ask password, but it cannot reopen the account to reset the password in him telling that the account does not exist. If she tries to set up a new account with the same email address, he said that the account is not accessible.

  When you delete a Microsoft account, there is a period of 30 days to use the same address to another account.

• I am setting up a new computer (with windows 10 HP).  I have a CC account, I went to adobe to download to my new computer do I download trail version then login with my ID?

  I am setting up a new computer (with windows 10 HP).  I have a CC account, I went to adobe to download it and couldn't find the trial download, what I download that then connect with my login?

  Please check private message.

• Need to install W7 professional to new SSD

  My main hard drive with W7 crashed. I installed a new SSD drive and tried to install W7 on upgrade drive, but since

  There is no OS on the drive, it will only install as a custom installation and does not accept the upgrade product key. I spent about an hour

  on the phone with tech support this afternoon and they had still no solution except to reformat the SSD and install

  WPA Apparently XP does not recognize the SSD drive, because the error message says that there is an unknown device and installation

  has failed.  On the advice of technical support, I loaded an EXE file (I don't remember the file name) which gave me nine series of number

  groups. When I called the phone number on the screen, I was told it was not a valid number.  What now?

  Reload Windows 7

  Skip, enter the product key, complete the installation.

  launch the installer to go within your installation running Windos 7 and reinstall Windows 7 during the current installation and enter your product key and try the activation of the Internet.

• Wanted: HDD Fried, need to install Windows on the new SSD

  My HARD drive on the flat because of a power surge. When I called HP Customer Service, they said I could get a USB one of recovery from any Windows computer, and then install Windows from USB to any new HDD or SSD.

  Now, when I try to install Windows on my new SSD clean or Virgin USB 8, it says that the partition is missing.

  How can I install Windows 8 on a whole new SSD?

  Thank you.

  Hello

  You can fallow as follows

  Step 1: Prepare the Installation

• Restoring my data to a new SSD with Time Machine

  I'm going to buy a new SSD hard drive, and I backed up all my data in Time Machine on an external hard drive. Is it possible to restore all my data only through Time Machine? I have a bootable USB key with El Capitan on that, I'm not worried about the operating system. Wouldn't time machine recognize my computer as a completely different machine? This treatment?

  If it is possible how I would go about it?

  hugosixtynine wrote:

  I'm going to buy a new SSD hard drive, and I backed up all my data in Time Machine on an external hard drive. Is it possible to restore all my data only through Time Machine?

  Your new SSD must be in the format GUID extended journeled using disk utility. Boot into Recovery (R command).

  Install OS X and use the Time machine to restore all your data.

  

• I can't set up a new account with T-Mobile 4G

  I have recently buy a slate of 10 HD 3600 us with Android JellyBean and I was just the initial game upward. Instructions to set up a new account 4G with T-Mobile seem simple enough in the tutorial:
  
  http://WWW8.HP.com/us/en/ads/free-mobility/overview.html?JumpID=va_r11260_go_freemobility
  
  BUT THEY DO NOT WORK ON MY TABLET! So I unplug my Wi - Fi tablet, went to Chrome, and that's all I ever get:
  
  You are in offline mode
  
  A Wi - Fi connection and mobile data are turned off.
  This page can be loaded once you connect to a network.
  Error code: ERR_Internet_DISCONNECTED
  
  I tried different cities, just to check if the T-Mobile signal was weak, where I live, with the same results. Could there be a problem with my SIM card?

  I saw in Amazon.com that I was not the only person having problems with implementation of this 4 G with T-Mobile account.  So I finally got a hand on Amazon and HP technical support, and the later explained to me that:

  "As you use the SIM card that is T-Mobile, you must activate the mobile data connection. You can enable it from the setting of the notification. In the top right drop-down menu panel. »

  So if you go to home page main of your device and make your finger down on the upper right corner, there is a menu with different options in the device settings. And of course, there is a T-Mobile utility that allows you to transform the mobile data. I did know about this because I'm all new to Android, and this is my first tablet. I could follow the tutorials to set up the account 4G T-Mobile after that.

• Help setting up all new SSD

  Hi guys

  I just installed a new Samsung 850 EV0 SSD in my iMac in early 2009 and now I'm confused on what I should do next.

  I have a time Machine backup that I would use it but I don't know how to start the Setup program.

  I tried to hit command-R, but it did nothing. Instead, I got the grey screen with a flashing folder.

  I have the Snow Leopard installation DVD, but I prefer to begin by the latest version of OS X which I believe is El Capitan.

  I'm not too sure if I can use my Time Machine backup that was on an older version of OS X Snow Leopard should install a new version of OS X of El Capitan.

  Can someone spend on certain instructions or practical information, so I can start again?

  Thanks in advance.

  Start with the Snow Leopard DVD and partition and format the SSD drive. Partition GUID, format Mac OS Extended journaled scheme. Install OS X and restore from your time using Setup Assistant Machine. Run software update to get to 10.6.8 and access the Mac App Store, where you can evolve to El Capitan.

  It is essential, you left some needed information. In my setup, I replaced the optical drive with an SSD and hard drive has left in place for storage. I have my operating system and the Applications on the SSD and my folder on the drive hard because I only installed a 250 GB SSD.

• Need help to set up a new Sony Bravia tv to watch videos on my computer

  I have XP sp3. Router wireless, if I plug in a flash drive with a video about it on the TV, I can watch the video. But when I try to watch my TV and access the video from my computer, TV says no file in this list. I have checked video files to share. The network recognizes that the TV is set up. I uninstalled Norton and disabled the windows firewall temporarily, without help. I think I open the appropriate ports. I can look at my pictures on the tv from my computer. Any ideas?

  Hello

  As the Bravia is not a computer, I don't know how the sharing would work without a specific account.

  Try to use the guest on the computer account.

  http://support.Microsoft.com/kb/300489

  Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET

• set up the new pc with a chart

  Well, I'm new and I have a complicated question for someone who has the time to fix my problem.

  I just bought a new computer hp from Wal-Mart without a monitor. I intend to use my HDTV as a monitor using HDMI to HDMI on a graphics card which I also bought. The question is what do I do and in what order to do all this work.

  I know that I must do the following:

  • I need to install the graphics card to use the HDMI output
  • I need to install drivers to use the graphics card (as far as I know
  • The initial pc set up when I start by putting

  Will be automatically recognized graphics card, or do I have to put in place a temporary means to see to configure settings using a cable vga etc.?

  In addition, is there something special, that I need to display on the screen or to get sound through HDMI?

  If someone would be willing to give me a solution step by step to this problem, I would be grateful.

  Here are links to my respective pc and graphics card:

  http://www.Walmart.com/IP/HP-BV530AA-ABA/15701586#specifications

  http://www.TigerDirect.com/applications/SearchTools/item-details.asp?EdpNo=5397646 & SKU = Z700-9508

  Hi and welcome to the forum...

  Map of tigerdirect link does not work, but don't worry, here is the solution to your problem...

  First set up your computer using the VGA port and install the video card software and driver on the PC.

  Then, install the video card on the computer. This link will guide you how to add card video on PC p6710f. The link is: Add a video card

  Thirdly, we must define PCIx16 as the main display adapter in the BIOS... And, to complete the steps below:

  Turn off the computer and wait five seconds.

  Turn on the computer.

  When the first screen appears, do one of the following:

  Immediately press the F10 key. Press the button once per second until what the BIOS configuration utility screen appears.

  Select the tab advanced using arrow keys left and right of the keyboard.

  Then select 'Primary Video' by using the up and down arrow and press ENTER.

  It opens a new window, ON the small new video select PCIx16 and click on enter.

  After that it shows PCIx16 beside the main video card in the list on the Advanced tab, press F10 to save settings and exit BIOS.

  Restart the computer and use the video card to connect the monitor.

  If you CAN'T find any option let me know...

  * AND FOR Sound you don't have to do something, it will be using HDMI, if not then need some adjustments to make the control panel.

  Click on the sin of congratulations on the left to say 'thank you '.

• Setting up my new machine with envy, what should I use, McAfee or Norton

  Hi all

  I have my new machine, an HP Envy 17 t j100

  I'm still setting up.

  I have a basic question that I can't answer.  I hope that this forum can help.

  The machine came with the software McAfee AntiVirus is installed.

  I have always used Norton products on my machines.

  Before I remove McAfee and install Norton, anyone have advice as to who is the best.

  Or, it's more a personal question.

  I have always used Norton because I thought that it is the best product, but I just want to check again.

  Thanks in advance,

  McAfee or Norton... or is it more a personal choice?

  YES, it is a personal choice.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• Need help to set up: 2 different wireless with SSID 2 routers on the same network

  Hi all:

  I read on the forum trying to find the answer to this question, but have not found a very clear answer that satisfies all my requirements autour.  An explanatiion more in depth.

  I have 1 IP coming via cable modem.  I want to configure two wireless routers (one secured with WPA-TKIP and a non-secure network - a 'guest' If you want to) each with different SSID.  The secure network would be for my server, PC home, webcams IP, DynDNS, update; While having an unsecured wireless router that friends and family can access.  Ideally, I don't want any person who accesses the router unsecured wireless to access my secure network.

  Is someone can you please tell me if this is possible.  I think that it is based on some posts, I've seen, but specific details about how to do this would be appreciated.  In addition, my DynDNS must always be able to be updated with the IP of my ISP so that I can access my server and webcams home.

  MATERIAL

  2 WRT54G

  1 EZXS55W

  1 WVC200

  1 WVC54GC

  (all my stuff - webcam, dyndns, server, etc. - working on my secure network.) I just need to add the non-secure network)

  I know it's a lot, but I'd appreciate any help.  Thank you.

  You must be connected to the modem router WRT54G main. Set up the network secure on the main router wireless. Connect all of your computers or wireless devices for the main secure wireless network.

  Consider that the IP address of the main router is 192.168.1.1.

  Now connect a single computer to Port 1 on the second router wireless.

  Open the second wireless router configuration page. Settings wireless SSID, unsecured.

  Change the IP address of the second router 192.168.2.1. Save the settings.

  Connect the cable from the Ethernet port on the main router to the Internet second port router wireless.

  The second power cycle wireless router.

  Now the host computers connected to the second network unsecured wireless Wireless will be able to access the Internet only. They will not be able to see the computers or devices connected to the first router.

• Advice on setting up multiple data sources with the health without double counting application.

  Someone has any advice on putting in place several sources of data with the application of health... and how to ensure that you are not double count data.

  I use an iPhone OS on 9.3.1 (my first iphone never). I use map my walk for specific tours. Garmin vívosmart HR for general steps, heart rate and sleep; and a balance of inside. I think that the iPhone itself also some general measures.

  Thank you

  Anthony

  The health app manages all the automatically.

• Cannot set up my new E4200 with Verizon FIOS on my Mac

  So, I bought an E4200 today. I don't know if it's v1 or 2. The box does not say v2, so I guess it's v1.

  I'm putting in place so I have the latest version of the operating system Mac OS (10.8 Mountain Lion), the installation CD is not compatible. I'm doing a series of manual upward, and it seems that step 1 is to go to 192.168.1.1, which is the same IP that my FIOS router use, so I have everything go right instead of to the E4200.

  Someone else did this thing works with Cougar and FIOS router?

  Excellent. You have an e4200v2.

  You can look down to a few threads and see that on the issue of e2500 wireless access point. It has a link to how your linksys router cascade.

  You can also google "e4200 Cisco support." to find your support page. Your support page will have all sorts of info including how to upgrade your firmware and how to connect your router.

  Ed. Oops. I wanted to say v2

• Reinstall Windows 7 on new SSD after failure of hard disk, damaged, incomplete product key

  I have a HP Pavilion.  The HARD drive recently failed completely, no possibility to recover data at the moment.  I ordered a set of HP recovery disks, but they seek the recovery on the HARD drive partition; There is no such partition that I replaced the HARD original with a new SSD drive.  To make things worse, the place that HP has chosen to put the Microsoft product key sticker resulted in the product being partially faded key.

  So, to summarize: HP not Pavilion with a corrupt OEM HDD and so far no data recovery possible. a new SSD with no partitions on this subject; a set of recovery disks from HP that don't just work; a sticker with the product key with the first two digits of the product key (as well as some of the barcode, etc.) rubbed off because they have chosen to place the sticker on the bottom of a working computer instead of, say, under the battery, it can be protected.

  If someone in the community has a suggestion as to how to install Win 7 (must be 7 on this system, cannot be an iteration of 8 or 10) from scratch, without having to buy it and with a corrupt OEM disc and a partial product key, I'd love to hear it.  Maybe it's time to install Debian on it?

  Ahh, this is the crux of the problem... the bootmgr is missing.

  To restore the windows off the factory restore DVD, you must configure the BIOS to use the DVD drive as the primary boot device. The machine will then start on the first DVD, and you will not get the above message.