Need advice on the "turn card effect".

Similar Questions

• Need advice on the graphics card for a6319fh

  Hello

  I have a Pavilion a6319fh with the original 250w power supply. Now, I have a core 2 quad Q9400 installed and want to upgrade the integrated video card so that I can play PC games, such as cod, Cyrix. I was wondering what type/map (I think a 256M card) allows me to do this without the power upgrade.  Any notice are appreicated. Thank you.

  Replacing the power supply is probably more important than the update of video card. This will better allow further improvements - memory, additional disks, etc... If you're a gamer...  I would try to find a 650w Psalm you can find them for ~ 65-100. If it is too stiff - 450w are ~ $25-30.

  Replace the power supply

  Once you have a decent diet, your choice of video cards becomes much easier.

  ReplacingUpgrading expansion cards

  Your motherboard have a PCIe x 16 slots.

  Go to the website of ATI and shop (top left corner)

  You can find all kinds of cards in many areas procedure, up to an ATI 4850 ~ $300 and requires a 500w PS: http://www.bestbuy.com/site/olspage.jsp?skuId=8894048 & type = product & id = 1212192380239

  If you are a fan of nVidia...

  http://www.nvidia.com/object/geforce_family.html

  Have fun

• Need advice on the video card / power supply upgrade

  OK, first of all I am a novice to PC. But I have a HP pavilion a6600f. I wan to be able to play games like Battlefield BC2 but graphics integrated card wont cut it. I checked some info and found what motherboard I have. Its a FOXCONN Napa HP P/N. There is a link to the Board of Directors in case it might help you to answer my question. http://www.cnsunnyit.com/products/HP-motherboard-KJ383-69002_78.html

  This motherboard is a card like a GeForce 7800 GT or ATI X 1900? These cards are what is suggested as a Minimum for this game. Also maps would require me to get a 400W power supply. The power supply can be changed as well? All the answers you may have would be great. Also remember that I know very little in terms of pc in order to keep its simple for a simpleton like me. Thank you!

  Hi 223fmj,

  You came to the right place.

  Yes, you can update your graphics card. More than all that depends on ports inside your PC.  Depending on your motherboard (HP) card , you can install PCI Express x 16 graphics cards.

  Here is a link to instructions on the adding/replacing a video card in your PC:

  http://support.HP.com/us-en/document/c01039210

  Here is a link to how to replace your power supply (with video):

  http://support.HP.com/us-en/document/c01356113

  And here is a link to the page for your PC that received instructions from replacement/upgrade of the other parts on your PC:

  http://h10025.www1.HP.com/ewfrf/wc/documentSubCategory?tmp_rule=24311&tmp_task=useCategory&LC=en&DLC=en&cc=us&lang=en&product=3794742

  Let us know how it goes.

• Guard application launch at the start of the appliance, also need advice for the implementation of network methods

  Hi all

  I'm new to the development of Blackberry and I'm writing a relatively simple application to run on 7.1.

  So far the development was interesting, I managed to create my user interface using resources online (mainly this forum), but today I tried to implement some of the network classes that I need and now I just met constant problems.

  I use Eclipse SDK 3.7.2 (the one that comes with the plugin RIM)

  First question:

  I'm not sure what I changed, but today I noticed that whenever I start the Simulator (by sim 9360) my application is started during the initial startup process. I don't think he did this before, but to be honest, I wasn't paying much attention. I think it starts at the start of the device is because I put a breakpoint in the constructor for my class from the main screen, which is hit before the Simulator happens even to the point where it is ready for user interaction. In addition, once it is ready, if I press the BB button, I see my registered application.

  I don't have it set to automatic start in .xml descriptior enforcement.

  I started this application on the HelloBlackBerry sample, here is my main method for the entry of the application:

  public static void main( String[] args ) {
          appSettings = AppSettings.fetch();
          // Create a new instance of the application and make the currently
          // running thread the application's event dispatch thread.
          HelloBlackBerry theApp = new HelloBlackBerry();
          theApp.enterEventDispatcher();
          //openConnection();
  
      }
  
  
  

  As far as I know, this is the only entry point for the application.

  More code

      public HelloBlackBerry() {
          // Push a screen onto the UI stack for rendering.
          mainScreen = new ScreenHelloBlackBerry();
          pushScreen( mainScreen );
      }
  

  Here is the method of. my class AppSettings fetch()

      // Retrieves a copy of the effective properties set from storage.
      public static AppSettings fetch()
      {
          AppSettings savedSettings = (AppSettings) _store.getContents();
          return new AppSettings(savedSettings);
      }
  

  Some of this code that I wrote myself, the persistence store cause the launch of my car?

  I tried to reset the Simulator to the factory settings, no change.

  All applications initialized during the startup of the device and then closed shortly after?

  Part 2: Need advice for the implementation of functions of network in the application

  I need to implement some methods that will retrieve data from a web service, and I also need to send data to this service. What I've read, the ConnectionFactory is the way to go. I want my application to make a request when the application is open and can check on a set interval. I didn't know exactly how to go about adding another thread for networking, I understand that network connections should not be created on the thread main event, so I tried to do this:

  The constructor of my class that implements screen (ScreenHelloBlackBerry), I use the following to create a modal dialog box to prompt the user for a username, I also try networking wire in the same segment of spawning:

          public ScreenHelloBlackBerry(){...initialize fields and managers, add it all together...then near the end
  
  //This will open the confirm dialog when the application is launched
          UiApplication.getUiApplication().invokeLater(new Runnable() {
                public void run() {
                    openConfirmDialog();
                  //start connection - Possibly broken
                    ConnectionThread ct = new ConnectionThread();
                    ct.start();
                }
          });
  

  I don't know if it's somehow OK to do, but it seems to work for what I need. I want a user who launches the application at the prompt, and if a user switch applications, when they come back they wondered again (unless they close the app and reopen it).

  Here is my ConnectionThread:

  public class ConnectionThread extends Thread
  {
  
      public void run()
      {
  
            ConnectionFactory connFact = new ConnectionFactory();
            ConnectionDescriptor connDesc;
            connDesc = connFact.getConnection("http://www.google.com");
            if (connDesc != null)
            {
                HttpConnection httpConn;
                httpConn = (HttpConnection)connDesc.getConnection();
                try
                {
                    final int iResponseCode = httpConn.getResponseCode();
                    UiApplication.getUiApplication().invokeLater(new Runnable()
                    {
                        public void run()
                        {
                            Dialog.alert("Response code: " +
                                          Integer.toString(iResponseCode));
  
                        }
                     });
                    httpConn.close();
  
                 }
                 catch (IOException e)
                 {
                   System.err.println("Caught IOException: "
                        + e.getMessage());
                 }
            }
      }
  }
  

  At the moment it has basically unmodified code from a sample that I found, I'll be retooling to meet my needs whenever I can make it work. I HAD this work to the point where, after the closed user confirm this dialog, a few moments later a an alert dialog appears with the 302 response code. I don't know what changed, but now it doesn't work at all, and if I try to scroll with the debugger, I can't past the httpCon.getResponseCode (). I've seen some mistakes earlier on "no record of service was set up", and I also had once a timeout exception.

  I'm sure I'm doing this wrong, but at the same time as I said WAS working, and now it is not. If someone has done this far, thank you very much for your time and advice are much appreciated.

  Also, should I try to start the thread of the network of the UIApplication class instead of the screen? There is currently very little happening in the class that extends UIApplication, do I spend most of my business logic out of the class of the screen and in the UIApplication class?

  Thanks in advance!

  Hi all

  Just to conclude this topic for those who are interested, I found an excellent guide to the implementation of networks in applications of BB, click here for a link.

  About my application being started at the start of the simulator of the device, I found that on a device real this behavior is not complied with, and in addition, the behaviour seems to have stopped after uninstallation and reinstallation of my Simulator.

  See you soon,.

• Hi, I'm changing payment five days ago mi information (I need to change the credit card number), but something happen and appears an error with this announcement page: "error number: PMT_000008" then... What should I do?

  Hi, I'm changing payment five days ago mi information (I need to change the credit card number), but something happen and appears an error with this announcement page: "error number: PMT_000008" then... What should I do?

  Since this is an open forum, not Adobe support... you must contact Adobe personnel to help

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• I need to change the credit card and cardholder of credit of our monthly plans... but I can't find any button billing. could you kindly say?

  Hi all

  I need to change the credit card and cardholder of credit of our monthly plans... but I can't find any button billing.

  can't find any support by adobe regarding billing issues.

  anyone of you could help me?

  Thank you

  Inga

  Change in the information of credit card to join creative cloud

  (1) connect to creative.adobe.com.

  2) click on the manage my subscription.

  (3) to change my billing information

  For the invoice

  (1) connect to adobe.com

  (2) go to my orders and select the order number, print the invoice here

• Need advice on the Satellite Pro M40

  I wonder if someone could advise me. We just bought 8 smart tips for our school with these I ordered 8 portable computers SatProM40. When I ordered them I checked the spec as follows

  Toshiba SatProM40 - Celeron M360 1.4 GHz - RAM 256 MB - HD 40 GB-CD RW/DVD-ROM combo - Mdm - Lan EN - FAST EN - Win XP Pro - 15.4 "TFT.

  I checked before I ordered that the RAM was 256 because I had heard that it is the minimum recommended to switch to XP.

  Laptops take almost 5 minutes to turn on and everything takes an age to work it's really frustrating and they are totally useless for our school because the entire lesson is included with get the computers to run anything.

  I checked the system information and found laptops were running of 192 MB RAM and rang the provider. I was told that they used 64 MB for the graphics card and that's why they had provided a RAM of 256 MB computer.

  My question to someone who can help:-c' is a normal practice. If I had known this I would have ordered a laptop computer with more RAM to compensate.

  He would welcome any advice that would help us get our children working on their new computers. Thank you.

  Hi Lisa

  In my view, Satellite Pro M40 is nice unit for school work, but I agree with you really is 256 MB minimum RAM and I recommend you buy more 256 MB or 512 MB, depending on your budget.

  The compatible RAM modules are:
  PC2700 256 MB (PA3311U - 2M 25)
  PC2700 512 MB (PA3312U - 2M 51)

  Problem is that this device uses shared memory and that means that RAM will be used also for graphic designers. If there is someone who has a good knowledge of PC that they check all running processes. Many of them are unnecessary and can be disabled. I also noticed that preinstalled Antivir asks (Norton) slow OS quickly. If all units are not connected to the internet I recommend you to remove it.
  By the way: there are many applications of good antivir which works well and don't slow down the operating system currently running.

  Good luck!

• Best network design... Need advice on the best use of NIC

  I'm new to the concept of Distributed Switch so I need advice.

  Our current environment is the result of a vCenter 4.1 and ESXi 4.1 Enterprise Plus, but we are just using the standard vSwitch (1 for vMotion/Console and 1 for virtual machines).  When the distributed switch came out, we were warned that a vDSwitch could cause us problems if the server vCenter or database is down.  We could not connect directly to the host and make network changes because the vDSwitch is set in the database.  That's why we stayed with the Standard vSwitch only.

  Our farm is quite small, only 5 hosts but we run around 100 mV in this regard.

  We use currently servers HP DL385 G7, which have 4 cards integrated network, and we have a map of installed NETWORK 4 port card.

  I use the NETWORK 4 EtherChannel ports and trunk card to our virtual machines.

  I am currently using only 1 network card integrated for vMotion and 1 for the Service Console and they all have two of the other defined as secondary.

  This configuration has worked very well for us, but I realize that the latest version of ESXi has some new features that we could use.

  NEW CONFIGURATION

  I'll put up a new vCenter 5 and ESXi 5 environment and I am considering using the switch distributed instead of the usual vSwitch we use.  I'm also eager to take advantage of the multiple NIC vMotion.  All our cards are 10/100/1000 MB capable... No. 10 GigE.

  I think... use that map 4 NETWORK ports for my EtherChannel/trunk for just as our virtual machine before, but this would be set to vDSwitch1

  The mixture of my 4 other integrated ports, it's causing me grief.  Should they be on a standard vSwitch or vDSwitch?  Use 2 ports for vMotion and 2 for the Console?  I really thought to use 3 ports for vMotion and 1 Console port.  I could put the Console port to use one of the vMotion ports such as adapter of standby is... I'm so confused freaking!

  Any recommendations on how I should put up?

  Hello

  Given that you can't split your vmnic for each vSwitch I would recommend either keep configuration simular with the knoweldge if a whole nic fails, you will take a failure or as autumn has already been mentioned on 'Origin Port ID'. Lets do this out and give a little better example

  Current configuration

  vSwitch0

  VMNIC0 - NETWORK interface integrated - Service Console

  VMNIC1-Onboard NIC - VMotion (different IP or VLAN?)

  VMNIC2-Onboard NIC - VMotion (different IP or VLAN?)

  VMNIC3 - NETWORK interface integrated - VMotion (eve of Console of Service) (different IP or VLAN?)

  vSwitch1

  VMNIC4 - extension PCI NIC - Etherchannel trunk - PortGroup - VMNET

  Extension VMNIC5 - PCI NIC Etherchannel trunk-PortGroup - VMNET

  Extension VMNIC6 - PCI NIC Etherchannel trunk-PortGroup - VMNET

  Extension VMNIC7 - PCI NIC Etherchannel trunk-PortGroup - VMNET

  Now, to captured to eliminate any single point of failure that you could do is break your Etherchannel trunk and back this vSwitch from Port ID and Setup VMNIC2, VMNIC3, VMNIC4, VMNIC5 as vSwitch1 for your VMNET. Then the cable to multiple switches eliminate any single point of faiulre. If your standard configuration would look like this

  vSwitch0

  VMNIC0 - on - Board Service Console

  VMNIC1 - Board - Vmotion

  VMNIC6 - extension PCI NIC - Vmotion

  VMNIC7 - extension PCI NIC - Vmotion (standby Service Console)

  vSwitch1

  VMNIC2 - VMNET

  VMNIC3 - VMNET

  VMNIC4 - VMNET

  VMNIC5 - VMNET

  So to finish any request for psyhical nics on this particular configuration the Port ID of origin essentially around robins. If during your first VM is online it will be use VMNIC2 and nic forever, until a failure, in which case he will grab the next nic online. When your second VM is online it will use VMNIC3 forever, until a failure and so on. This still will give you around the same way through to as far as networking is concerned. However if you are attached to the trunk, etherchannel 4 GB and can obsorb a failure in case of failure, the network card 4 ports can stay.

  Distributed switching Setup

  Allows you to see how you can switch to distributed switching

  Let's start first of all, you can have EVERYTHING in switches distributed even the service console port if you wish. The resason why some people do not like to do this with the service console port is because IF your database is broken you cannot make any changes to the distributed switch. However it will not prevent a feature to your distributed it switches simply means, you can change them. Also if just getting worse and your DB has been declining for some time and you REALLY need to make a change to the service console port you can go into the console and change back to a standard vSwitch if need be. This allows the said look at some standard configs, you can work

  vSwitch0 (Standard)

  VMNIC0 - Service Console Port (Port Original ID or standby)

  VMNIC4 - Service Console Port (Port Original ID or standby)

  vSwitch1 (Standard)

  VMNIC1 - Vmotion

  VMNIC5 - Vmotion

  Distributed switch

  VMNIC2 - VMNET

  VMNIC3 - VMNET

  VMNIC6 - VMNET

  VMNIC7 - VMNET

  Now this config using originating port ID and breaks your etherchannel if you want to keep your configuration with the etherchannel it can look like this

  vSwitch0

  VMNIC0 - NETWORK interface integrated - Service Console

  VMNIC1-Onboard NIC - VMotion (different IP or VLAN?)

  VMNIC2-Onboard NIC - VMotion (different IP or VLAN?)

  VMNIC3 - NETWORK interface integrated - VMotion (eve of Console of Service) (different IP or VLAN?)

  Distributed switch

  VMNIC4 - VMNET

  VMNIC5 - VMNET

  VMNIC6 - VMNET

  VMNIC7 - VMNET

  Other changes to the configuration may also put the vmotion in distributed witch the VMNET but you would to VLAN, or you could create a second Distributed switch and put it as long as there are 2 network cards. It can go either way. The main advantage of a distributed switch is that it brings all of your settings with you in any host. So trade ect all your VIRTUAL networks is really easy to reproduce if a new host is brought online, all you have to do is to add the new host network cards in the distributed switch and your config is done. With that in mind lets look at the service console. This console is always configured on EACH Setup program that out you of the box if not that you really need to have these parameters transported on several hosts that is another reason why most people just don't. VMotion is up to you, I have seen and configured two ways, it all depends on how simple you want to keep it or think of switching / vlaning / port of groups.

  If you have any questions please let me know, I hope this has helped

• HP Pavilion Elite m9426f: need replacement of the graphics card

  I need a replacement for my ATI Raedon HD 3650 which burned and have no idea what to get.

  Sheet here http://h20564.www2.hp.com/hpsc/doc/public/display?docId=c01570954

  Thank you for the information, @jzortiz55.

  The power supply should be fine.  I'm not familiar with the quality of the Dynex brand.  The PSU is not created equal.

  The video card that I recommend is the best you can do with your motherboard.  Latest maps need UEFI in the motherboard instead of a standard BIOS.  As I suggested in my original post, you can contact the manufacturer's Technical Support to help you choose a better card.  However, I doubt if you will find a.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• Satellite A355 - new part need to replace the graphics card

  Please someone help me find a replacement for my graphics card!
  I can't find this type of card the "ATI RADEON MOBILITY 3650 for TOSHIBA SATELLITE A350.
  On the back of the card have this code "M86 512 HYN"

  Hello

  You can buy compatible parts of the ASP from Toshiba (authorized service provider) in your country. But I don't know if you will get only the mono-GPU or if you need to buy the whole motherboard which contains this chip too m.

  So, get in touch with Toshiba ASP technicians and ask for this part!

• HPE-590uk: need help on the best card GeForce

  Well, I tried to upgrade GT 420 2 GB to

  EVGA GT 740 Superclocked 4 GB DDR3 Dual DVI HDMI PCI - E Graphics Card

  seems it's not compatible with my HPE-590UK Just wouldn't start... If anyone can help wat graphics card is compatible with my pc please... EVGA support suggested a GT 640 but can't find one anywhere that all seem to be exhausted... Help!

  Here is a link to Amazon.com in Britain:

  http://www.Amazon.co.UK/EVGA-GT640-GDDR5-PCI-E-graphics/DP/B00EU6VXOW/ref=sr_1_1?ie=UTF8&QID=1456891994&SR=8-1&keywords=EVGA+gt+640

  It shows they have on in stock.  I would contact them to see if it is still available.  It is the last card that does not need UEFI in the motherboard.  That's why they recommend.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• Need advice replaces the screen HP Mini 2102

  Hey all,.

  I'm fixing a netbook HP Mini 2102 which was abandoned on the ground. The netbook works fine, except that now the screen is a little blurry and washed on the right side. Generally, when a computer screen is upward, trying to replace the converter display card, as was the case with a machine to HP Pavilion dv9000 I fixed recently.

  However, after dismatling the computer, I found no such ups on the screen, and after consultation with an HP support assistant very useful during a session of live chat who informed me that it is not a separate inverter Board available for purchase, I have come to believe that I need to replace the entire screen.

  If I'm not mistaken, the LCD part number is 589649-001 for this particular model that I am repairing. I created this post to confirm that the ups on this Mini Board can be replaced, and I need to replace the entire LCD screen - less camera, bezel and hinge, which all work fine - in order to solve the display problem.

  If you have any other suggestions as to what part I need, or if I have to take a completely different approach to the repair, please let me know before ordering the part of LCD screen.

  "Violence is the last refuge of the incompetent." -Issac Asimov, from its roman Foundation.

  Hello

  You are right, you can save money simply select the good parts. I think not much.

  Good luck.

• I have a TravelMate 6592 G and you need to replace the video card.

  The original card is ATI Radeon X 2300 - H, which is no longer manufactured. Can someone tell me what the map is compatible now?

  Hello

  Unfortunately, you have a discrete graphics (Mobility Radeon HD 2400 XT) on the motherboard.

  This means that you need a new motherboard. It is not a graphics card for this model.

  Note:

  P/N: LX. TNE0Z.107

  Model: TravelMate 6592 G-602G16n

• Code product key SanDisk needed to open the SD card. How to acquire

  I have a SanDisk SD card.  lost product key code.  request code product key open the contacts list of cells stored on SD card.

  Moved from Internet Explorer - IE10

  Original title: the necessary SanDisk product key code.  How to acquire

  You will need to contact the Support of SanDisk or post in the help forum community of SanDisk .

• need help on the graphics card update

  I have this pc} HP Pavilion a6720y desktop PC

  Her husband has improved the power to 500 a year or two ago.

  I have a Lg 2350v monitor

  under windows 7.

  currently have the geforce 9100.

  Im not in the game, but do a lot of photo editing and my screensaver aquarium still stalls.

  Any recommendations welcome

  Thank you

  {dlts4u wrote: I have this pc} HP Pavilion a6720y Desktop PC Hubby improved power to 500 a year or two ago.

  I have a Lg 2350v monitor on windows 7. currently have the geforce 9100. Im not in the game, but do a lot of photo editing and my screensaver aquarium still stalls. Any recommendations welcome thanks

  Hello dlts4u, here is the link for the specifications of your system.

  It shows that it has been shipped, as you talked about a video GeForce 9100 on board device, and also the motherboard has a PCIe x 16 video card slot.

  There are many different options for a discrete video card, it would be difficult to offer suggestions.

  There are a few things to consider when buying a video card in your system. The first thing to consider would be the capacity of power supply. You should also check the power supply for the power for an additional video card cables. Some cards require a power cable while others require two power cables.

  You need to measure the space where the extra video card insert slot PCIe x 16. Some of these new video cards are long enough and your case do not have enough space to install one of the longer cards. You can measure the distance between the rear of the case on the inside where the video card would be inserted in the slot and the other end to the front of the case and see what would be the distance available.

  Many video cards back in this space, but many will not, being too long.

  Since these cards are performing more high, they wil create more heat inside the case. This usually isn't a problem, but just something to know.

  You can buy cards under $ 100.00 to over $ 500.00. I suggest an average price a supplier of brand name card.

  Personally, I prefer the Nvidia brand, but AMD Radeon cards are nice as well.