Need advice to clone my newly installed EBS 12.1.3 to a physical machine

Similar Questions

• Need advice from 11g - I should install last Patch BEFORE I create the database?

  Hi experts,
  
  I installed the software of database 11g only - without databases exist.
  
  I want to do 2 things - create a user database and also install the latest patch for 11.2 level
  
  I guess I'll have less work to do if I first install the patches to 11.2 g before you create the database. In this way, the base will automatically have the latest patch. Is this correct?
  
  Thank you, John

  Best practices, such as defined by Oracle is:

  1. base version of the software install only
  2. apply patches on Oracle home
  3. run netca
  4. run dbca

• Inspiron s 660: hard disk failure. Need advice please.

  Long story short my sister gave me a s Inspiron 660 she received as a gift a few years back (legitimate).  She said that was no longer working and I could.  I suspected a faulty hard drive and after several diagnostic tests later confirmed the WD Blue crashed the original; complete failure. Now, here's where I need advice:

  1. when it has received, it came not with a physical disk from the Windows 8.0 operating system.  It was pre-installed and then upgraded through its work of departmental to 8.1 it.

  2. I can't access the code of Windows because it is in the BIOS.

  3. I have a hard drive to work with Windows 7 installed and tried hooking laptop to see if he should realize that he was a long shot at best.  As you have probably concluded he was not recognized.

  4. I thought wiping one of my hard drives and do a clean install of Windows 10.

  Question: With a new hard drive (or possibly an SSD) would work #4 or I still have problems with the BIOS and Windows embedded product code?

  Question: What do you suggest I should try?  It's a nice little system and everything is clean and stable.  I have someone who needs a system, but can't afford it, and I thought I'd give something that would meet its needs.

  Thank you.

  ROUTE29

  Re: 4. I thought wiping one of my hard drives and do a clean install of Windows 10.

  Yes, it should work, but to do this, you must either buy an OEM copy of W-10, which has its own product key.

  http://www.BestBuy.com/site/Microsoft-Windows-10-home-64-bit-Windows/4423102.p?skuId=4423102

  https://softwarekeep.com/Microsoft-Windows-10-Home-Edition-32-bit.html?gclid=CNXh5ev3wc8CFQGSaQod5A4LMQ

  The upgraded version free of W-10, Windows 8, 8.1, 7 ended July 26.

  Bev.

• Need a tutorial/simple comands cheat sheet Ora Linux to install EBS 12.1

  Its the first time I am doing something outside of Windows. Everyone has any cat sheet/doc of simple list of Oracle Linux commands that I should now to install EBS 12.1.1?

  932968 wrote:
  Its the first time I am doing something outside of Windows. Everyone has any cat sheet/doc of simple list of Oracle Linux commands that I should now to install EBS 12.1.1?

  http://bit.LY/JNlPJu

  Thank you
  Hussein

• the FF update section is missing from my newly installed FF14! My OS is Ubuntu.

  the section 'Update of FF' is absent from my newly installed FF14! My OS is Ubuntu.

  Sounds that you have installed a version of Firefox from the Ubuntu software repositories.
  
  This version must be updated form the update of Ubuntu Software and cannot be updated directly via help > about Firefox.
  
  You need to install the official version of Firefox from the Mozilla server if you want to update yourself rather than wait until Ubuntu offers an update.

  • http://KB.mozillazine.org/Installing_Firefox#Linux

• Firefox 4 does not appear newly installed plugins navigator.plugins array

  In Firefox 4, I'm trying to detect with javascript whether a certain plugin is installed by looking in the navigator.plugins array. (https://developer.mozilla.org/en/DOM/window.navigator.plugins)

  It seems that the newly installed in Firefox 4 plugins do not appear in this table.

  I restarted Firefox, and they appear in the Firefox Add-ons Manager, but not in the navigator.plugins array.

  I know Firebug works because I used it to show me the contents of window.plugins.

  (In addition, you can even see that your script does not pick up Firebug when you got my list of plugins automatically to fill the field 'Installed Plugins' in this post.)

  I think that the plugins installed via an XPI file as an extension should always appear on the topic: plugins page. I'm using Linux and this is how to install the plugin Silverlight (Moonlight).

  A good place to ask questions and advice on web development is the forum mozillaZine evangelism/Web development Standards.
  
  Aid to this forum are better informed on issues related to web development.
  
  You must register on mozillaZine forum site to post in this forum.

  See http://forums.mozillazine.org/viewforum.php?f=25

• How to move the original system to the SSD newly installed without an optical drive?

  I want to buy a W530 and spare SSD upgrade.

  I want to order one without a DVD player.

  How to move the system of origin, drivers and other software for the SSD newly installed without an optical drive?

  Hope someone could help me. Thank you.

  The two utilities that I mentioned manage alignment automatically. Also, I photographed my hard drive, then restored the SSD. I have no clone, which means a direct copy of the HDD to the SSD.

  I just went through this myself in July, using Acronis True Image 2012 to get my existing on my 256 GB SSD mSATA HARD disk image. It worked like a charm. I checked that the SSD has been properly aligned.

  See:

  Migrate to SSD

  and:

  Check the alignment of SSD

  Now stop worrying!

• The migration of all the ebs installation 12.1.3 fresh installed ebs 12.1.3

  Hello world

  12.1.3 EBS was installed on Linux rhel 5 1 year ago. and after 1 year with many configurations and customization.

  
  EBS showing a lot of issues and requirement is to install 12.1.3 EBS fees and move all previous data EBS & configuration to the freshly installed.

  As it seems that EBS 12.1.3 has not been installed properly, which led to many questions issues.my.

  
  (1) is it possible to install 12.1.3 EBS fees and then move the configuration and data prior to this.
  is this advisable?

  
  If Yes?  How? Kindly give me a detail orientation

  (2) how to do a checkup currently installed EBS 12.1.3.

  I mean if I can show them that there is nothing wrong with the installation. Then we need to think about alternatives.

  What about the issues? they are functional configuration number? or the issue of customization?
  If so why would you move only those configuration when you already have questions about...

  Yes, you can migrate

  For the migration of application level, see:

  Migrating applications platform with Oracle E-Business Suite Release 12 (Doc ID 438086.1)

  R11i / R12: Oracle E-Business Suite upgrades and Platform Migration (https://support.oracle.com/rs?type=doc&id=1377213.1%29Doc ID 1377213.1)

  For installation

  https://blogs.Oracle.com/stevenChan/entry/ten_ways_of_using_isetup_to_st

  For database migration, see:

  Process of 12.0 and 12.1 using 11 GR 1 material or 11 GR 2 import/export (Doc ID 741818.1)

  Using Transportable Tablespaces for EBS Version 12.0 or 12.1 using Database 11 GR 2 (Doc ID 1311487.1)

  TO check the cross installtion

  How to locate the log files and troubleshoot a quick installation for immediate release 12.0.x and 12.1.x (Doc ID 452120.1)

  ApPsMaStI

  sharing is caring

• need advice on which version of Dreamweaver to purchase

  Hello.  I need advice I can buy it on which version of Dreamweaver.  I have an iMac v. 10.10.5.  I want a monthly fee, want just a one-time software purchase so that I can build my own personal Web site

  Creative cloud is simply a distribution model & payment.  You always download & install the software on your computer as you always have.  You always save the files on your local hard drive, you always. Nothing has changed in this regard.

  CS2, 3, 4, 5, 5.5 is no longer supported or sold by Adobe.  If you buy software from another source in line do so at your own risk.  The pirated versions were circulating these last time and they do not work.  In some cases, they contain malware that could compromise your computer.

  You have a modern operating system.  This is another reason to use current software. Several older versions required Rosetta which Apple is more included in its press releases.  Purchase of old copies similarly ligit software does not mean that it will work on your system.  Let's face it, the stuff you used 8 years ago are useless today because Apple & Win continue to change operating systems.

  I use a little media with DW CC.  It is a very fast, modern code editor.   In fact, Adobe will soon integrate DW CC 2016 version supports.

  Nancy O.

• Best network design... Need advice on the best use of NIC

  I'm new to the concept of Distributed Switch so I need advice.

  Our current environment is the result of a vCenter 4.1 and ESXi 4.1 Enterprise Plus, but we are just using the standard vSwitch (1 for vMotion/Console and 1 for virtual machines).  When the distributed switch came out, we were warned that a vDSwitch could cause us problems if the server vCenter or database is down.  We could not connect directly to the host and make network changes because the vDSwitch is set in the database.  That's why we stayed with the Standard vSwitch only.

  Our farm is quite small, only 5 hosts but we run around 100 mV in this regard.

  We use currently servers HP DL385 G7, which have 4 cards integrated network, and we have a map of installed NETWORK 4 port card.

  I use the NETWORK 4 EtherChannel ports and trunk card to our virtual machines.

  I am currently using only 1 network card integrated for vMotion and 1 for the Service Console and they all have two of the other defined as secondary.

  This configuration has worked very well for us, but I realize that the latest version of ESXi has some new features that we could use.

  NEW CONFIGURATION

  I'll put up a new vCenter 5 and ESXi 5 environment and I am considering using the switch distributed instead of the usual vSwitch we use.  I'm also eager to take advantage of the multiple NIC vMotion.  All our cards are 10/100/1000 MB capable... No. 10 GigE.

  I think... use that map 4 NETWORK ports for my EtherChannel/trunk for just as our virtual machine before, but this would be set to vDSwitch1

  The mixture of my 4 other integrated ports, it's causing me grief.  Should they be on a standard vSwitch or vDSwitch?  Use 2 ports for vMotion and 2 for the Console?  I really thought to use 3 ports for vMotion and 1 Console port.  I could put the Console port to use one of the vMotion ports such as adapter of standby is... I'm so confused freaking!

  Any recommendations on how I should put up?

  Hello

  Given that you can't split your vmnic for each vSwitch I would recommend either keep configuration simular with the knoweldge if a whole nic fails, you will take a failure or as autumn has already been mentioned on 'Origin Port ID'. Lets do this out and give a little better example

  Current configuration

  vSwitch0

  VMNIC0 - NETWORK interface integrated - Service Console

  VMNIC1-Onboard NIC - VMotion (different IP or VLAN?)

  VMNIC2-Onboard NIC - VMotion (different IP or VLAN?)

  VMNIC3 - NETWORK interface integrated - VMotion (eve of Console of Service) (different IP or VLAN?)

  vSwitch1

  VMNIC4 - extension PCI NIC - Etherchannel trunk - PortGroup - VMNET

  Extension VMNIC5 - PCI NIC Etherchannel trunk-PortGroup - VMNET

  Extension VMNIC6 - PCI NIC Etherchannel trunk-PortGroup - VMNET

  Extension VMNIC7 - PCI NIC Etherchannel trunk-PortGroup - VMNET

  Now, to captured to eliminate any single point of failure that you could do is break your Etherchannel trunk and back this vSwitch from Port ID and Setup VMNIC2, VMNIC3, VMNIC4, VMNIC5 as vSwitch1 for your VMNET. Then the cable to multiple switches eliminate any single point of faiulre. If your standard configuration would look like this

  vSwitch0

  VMNIC0 - on - Board Service Console

  VMNIC1 - Board - Vmotion

  VMNIC6 - extension PCI NIC - Vmotion

  VMNIC7 - extension PCI NIC - Vmotion (standby Service Console)

  vSwitch1

  VMNIC2 - VMNET

  VMNIC3 - VMNET

  VMNIC4 - VMNET

  VMNIC5 - VMNET

  So to finish any request for psyhical nics on this particular configuration the Port ID of origin essentially around robins. If during your first VM is online it will be use VMNIC2 and nic forever, until a failure, in which case he will grab the next nic online. When your second VM is online it will use VMNIC3 forever, until a failure and so on. This still will give you around the same way through to as far as networking is concerned. However if you are attached to the trunk, etherchannel 4 GB and can obsorb a failure in case of failure, the network card 4 ports can stay.

  Distributed switching Setup

  Allows you to see how you can switch to distributed switching

  Let's start first of all, you can have EVERYTHING in switches distributed even the service console port if you wish. The resason why some people do not like to do this with the service console port is because IF your database is broken you cannot make any changes to the distributed switch. However it will not prevent a feature to your distributed it switches simply means, you can change them. Also if just getting worse and your DB has been declining for some time and you REALLY need to make a change to the service console port you can go into the console and change back to a standard vSwitch if need be. This allows the said look at some standard configs, you can work

  vSwitch0 (Standard)

  VMNIC0 - Service Console Port (Port Original ID or standby)

  VMNIC4 - Service Console Port (Port Original ID or standby)

  vSwitch1 (Standard)

  VMNIC1 - Vmotion

  VMNIC5 - Vmotion

  Distributed switch

  VMNIC2 - VMNET

  VMNIC3 - VMNET

  VMNIC6 - VMNET

  VMNIC7 - VMNET

  Now this config using originating port ID and breaks your etherchannel if you want to keep your configuration with the etherchannel it can look like this

  vSwitch0

  VMNIC0 - NETWORK interface integrated - Service Console

  VMNIC1-Onboard NIC - VMotion (different IP or VLAN?)

  VMNIC2-Onboard NIC - VMotion (different IP or VLAN?)

  VMNIC3 - NETWORK interface integrated - VMotion (eve of Console of Service) (different IP or VLAN?)

  Distributed switch

  VMNIC4 - VMNET

  VMNIC5 - VMNET

  VMNIC6 - VMNET

  VMNIC7 - VMNET

  Other changes to the configuration may also put the vmotion in distributed witch the VMNET but you would to VLAN, or you could create a second Distributed switch and put it as long as there are 2 network cards. It can go either way. The main advantage of a distributed switch is that it brings all of your settings with you in any host. So trade ect all your VIRTUAL networks is really easy to reproduce if a new host is brought online, all you have to do is to add the new host network cards in the distributed switch and your config is done. With that in mind lets look at the service console. This console is always configured on EACH Setup program that out you of the box if not that you really need to have these parameters transported on several hosts that is another reason why most people just don't. VMotion is up to you, I have seen and configured two ways, it all depends on how simple you want to keep it or think of switching / vlaning / port of groups.

  If you have any questions please let me know, I hope this has helped

• How can I update my newly installed CS6 products (illustrator, photoshop, etc.)?

  How can I update my newly installed CS6 products (illustrator, photoshop, etc.)? I'm sure that some of them have been updated since the installation disc has been achieved... I need the latest versions for CS6, not the cloud.

  You can usually open a program and click Help > update...

  or you can update manually, updates

• How to install EBS R12

  Hello
  
  How to install EBS R12? actually I just need to know which short pre installation task to perform this installation?
  should I change dans/etc/sysctl.conf?
  I need to change all pam.d?
  What happens below group and user to create?
  
  OS rhel 5.3
  EBS 12.0.0.
  HP hardware
  RAID 0 HDD SAS 146 * 3
  
  dbtier and applications installation.ie node level unique no cars will be in the same server.
  
  rgrds

  PL identify what version of R12, you plan to install. PL see these Docs MOS (in addition to the Apps Setup Guide for your press release to http://www.oracle.com/technology/documentation/applications.html)-

  421409.1 - unbreakable Linux Enviroment check before installation R12
  761566.1 - oracle eBusiness Suite Installation, and 12 (12.1.1) for Linux x 86-64 upgrade version Notes
  761564.1 - oracle eBusiness Suite Installation and upgrade to version 12 (12.1.1) for Linux x 86 Notes
  402310.1 - installation of oracle Applications and 12 (12.0.4) for Linux (32-bit) upgrade version Notes
  416305.1 - installation of oracle Applications and 12 (12.0.4) for Linux (64-bit) upgrade version Notes
  555874.1 - installation of oracle Applications and upgrade to version 12 (12.0) Notes for Linux (32-bit)

  HTH
  Srini

• I'm recently back from Berlin where I accidentally left my iPhone 6. My friend tried to send it to me; However, he was returned by customs. Need advice on getting my iPhone 6 sent from Berlin to California.

  I'm recently back from Berlin where I accidentally left my iPhone 6. My friend tried to send it to me; However, he was returned by customs. Need advice on getting my iPhone of Berlin has been sent to California.

  You'll have to talk to the German customs and find out what their requirements are to send an iPhone.

• I have copy of old tbird and seamonkey e-mail files with the files and emails for each. I need to add to new tbird install. can not find a way to do it. Help

  I have copy of old tbird and seamonkey e-mail files with the files and emails for each. I need to add to new tbird install. can not find a way to do it. HELP PLEASE. previous e-mail files are under mail then mail.earthlink* .net and each of the five mail .net is an email address I have. I can't find a way to identify each file by email to the specific email address (IE mail.my E-mail name.net) so I can copy the files and emails from the past to the email addresses now under tbird. previous installed e-mail identities may not be the current configuration of e-mail files in tbird. I think that I must be sure that mail.name.net matches the previous mail.name.net to be able to copy and paste the old to the new. is there a way to find the file name correct the old email and correspond to the new? all my emails very important information are mostly in the old mail electronic id and must be available in the identification of email again (but same) how can I do this?

  http://KB.mozillazine.org/Importing_folders

  Use this module.

  https://addons.Mozilla.org/en-us/Thunderbird/addon/ImportExportTools/

• Satellite Pro P100: I need to remove some software before installing Vista

  My Satellite Pro P100 needs the following software uninstalled before installing Vista: -.
  Norton Internet Security
  Bluetooth Stack for Windows by Toshiba
  ConfigFree

  Toshiba has plans to release a version of Vista the last two?

  Hello

  I put t know that Toshiba exactly, but all the tools and utilities will be available for download after the official launch of Vista.

  A friend of mine told me that it may happen that all software will not be created separately for the facility, but as a set of software. I put t know where he found this info, but let's see how it will work.

  By the way: pile of BT for Vista is available on the Toshiba BT page. Check it out under the http://aps.toshiba-tro.de/bluetooth/

  Good bye