Need Drivers wireless XP for Equium L350 - 10L (PSLD2E)

Hello

I have been hunting around the Web site and downloaded all the drivers wireless I can find for this model, but still can't seem to get the WiFi device recognized.

Any idea what chipset I have in this laptop and if possible where to find the drivers?

Thank you very much

Leon rice
[email protected]

Hello

I found a Realtek driver for the [card WLan RTL8187B | http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=1&PFid=1&Level=6& Conn = 5 & DownTypeID = 3 & GetDown = false & downloads = true] here on the Realtek page.

Scroll down and choose the RTL8187B

Concerning

Tags: Toshiba

Similar Questions

  • Need driver SATA XP for Equium L350 - 10L PSLD2E

    Hello

    I have a laptop Toshiba Equium L350 - 10L PSLD2E and want to downgrade the XP operating system.
    I have an XP license and have tried to install XP but I need an F6 driver as the windows install is not recognized the hard drive, so not be able to install.

    Anyone know how I can get the driver.

    Thank you very much

    Hi Simon

    I m your man dude ;) I think I can help you.

    You need a SATA driver for new generation mobile phones are equipped with controllers SATA HDD, which needs a SATA driver.
    The key is the Intel Storage Manager.

    It contains the SATA driver for different Intel chipsets.

    I found the compatible driver here in page Intel:

    [Intel® Matrix Storage Manager: http://downloadcenter.intel.com/filter_results.aspx?strTypes=all&ProductID=2101&OS FullName = Windows * + XP + Professional & lang = eng & strOSs = 44 & submit = Go % 21]

    You must choose the * 32-bit floppy Configuration Utility for Intel Matrix Storage Manager *.

    It is a driver that can be included by using the F6 key during the installation of Win XP.

  • Equium L350 - 10L PSLD2E: FN + F6 does not work under Win XP

    Hello

    I have a laptop Satellite L350 - 10L PSLD2E and just have it downgraded to XP of the original Vista.

    I have all the drivers set up were needed, that didn't they no yellow question mark in Device Manager.

    My problem is that I can't change the properties of the screen.
    The screen is high heat and using the button with number F6 FN does not bring the brightness.

    All the options of the FN do not work.

    Anyone can guide me please to sort it?

    Thank you very much

    Hello

    Have you installed the common Module and Hotkey Utility?

    The common Module software is an essential element for the use of the FN button.

    It should be installed first

    Please download and reinstall. In my view, this should allows to get the functionality of the FN button.

    See you soon

  • Need drivers Windows XP for Equium A300D - 16 c

    Hello

    I recently bought the Toshiba Equium A300D - 16 c, but I wanted XP but I thought support only in Vista, but you could buy XP and reinstall.

    So I reformatted the PC, installed Windows XP Pro.
    But my main concern is the drivers, where can I get them?

    I looked on the site of Toshiba Driver but it only shows the Vista drivers.
    I have no need of all drivers just the main... can someone tell me where I can get the XP drivers for this model?

    Thank you

    Rowan88

    Hello

    I really wonder you already deleted Vista, Windows XP Home Edition installed without address information on support for Windows XP Home Edition. I also hope that you created the recovery DVDs until you have deleted Vista.

    Back to your problem. Support for Windows XP Home edition for your laptop model can be a bit more problematic. I have laptop AMD too and my phone is not supported WXP. I think that there is not much difference between hardware platforms for Equium, Satellite A300D and P300D.

    Check the Toshiba support site a little and try to install drivers for Satellite to satellite. Maybe you'll have success.

  • Partition of hard disk for Equium L350 - 10L

    Hello

    I am a new owner of a L350 - 10L. Loading the files from the laptop, I was told that I had run out of space. Investigate a bit more it seems I drive hard havea partitioned. I think that I expect that the "valorisation" of files are stored on the hard drive. But the size of the partition seems a little odd to me. The disc has a pertition to Vista and a called E:\Data being 54.5 GB in size.

    Question - can I safely reformat the hard drive? Should I run the Setup again. This seems a bit odd. Is there a reason for the size of partition?

    Kind regards
    Paul

    Hello
    I have the same laptop. Download GParted LiveCD and boot inside. Then resize partition D:\ lower then resize the partition above C:\ with unallocated space. Is not wipe your data.

    Hope this helps,
    Jonty

  • Compatible replacement optical drive CD-DVD for Equium L350 - 10L

    Hello

    a cd got introduced in the drive and I can't, then you need to replace the CD player in my laptop.

    Anyone would be able to tell me what brand/model compatible with this model or I can buy any player?

    "" I saw a slim drive of ' Techguys CD-DVD "PC World - would that be ok?
    I'll find someone else to adapt to it that I don't have any idea how out the CD.
    He previously worked with other discs and it was laid flat in the tray - now the drawer does not close.

    Hope someone out there can give me some advice on why it happened suddenly and what new drive to substitute for the purchase.

    Thank you.

    > a cd got introduced in the drive and I can't, then you need to replace the CD player in my laptop.

    You are not able to open the CD/DVD drive.
    There is a little near the eject button.
    You will need to put a small wire or another object in this set to eject the CD or DVD.
    It is a last option if the eject button does not work.

    PS: in the manual of the laptop you should be able to find information on compatible CD/DVD players.

  • Equium L350 - 10L - where can I find the right driver WLAN?

    Hello

    I changed my windows, so I need to install the driver for my Toshiba Equium L350 - 10L Wlan. I downloaded all the drivers from the Web from Toshiba site, but it is still showing this missing Ethernet controller.

    Can someone help me solve this problem?

    Thank you.

    Hello

    Are you sure that it s the WLAN card?
    Ethernet controller could also be the normal LAN card.

    Here, you can check which driver you need:
    http://www.PCIDatabase.com/
    The vendor and device ID, you can check in-online properties of the Ethernet controller device manager. You should find something like VEN_xxxx & DEV_xxxx

    After that, you can download the appropriate driver.

    Welcome them

  • Impossible to install Win2003 Server to dualboot with Vista on Equium L350 - 10L

    Hello
    I have Windows Vista preinstalled on my Equium L350 - 10L. I wanted to install Windows 2003 server on another partition in order to dual boot between the 2 operating systems. When I start with the install of Win2003 CD and access the Setup screen, I get the following error: «Setup didn't find any hard drives installed in your computer» I'm assuming (correct me if I'm wrong) I have need to install the drivers for the SATA controller during the installation when he says "press F6 to install 3 pary SCSI or RAID drivers. I have two problems: 1. I can't find the drivers for the SATA for EQUIUM L350 - 10 L controller, 2. the laptop is not a floppy drive - which is the only way to install drivers during installation. Helpful suggestions and solutions would be greatly appreciated. Thanks in advance.

    Hello

    It is important to doesn´t if toshiba does not explicitly have the F6Floppy drivers for your machine. You can go to www.intel.com and download the drivers from F6Floppy from there.

    On the issue of the 'no-floppy", you can easily find a way just in slipstreaming with nlite for self made Win2003 Server drivers CD.

    To learn more about "slipstreaming" CD with nLite, simply type 'Nlite slipstream XP ICHM8' or some of these words in google and you will find all THE answers. Or you use the forum search and find only 10000 messages on this slipstreaming with nlite, etc...

    Welcome them

  • Equium L350 - 10L: how to make dualboot - Vista and XP

    I need help.

    How could I install an operating system of Windows XP and all keeping my Windows Vista.
    It's like having two operating systems in one.

    My laptop model is Toshiba Equium L350 - 10L.

    Thank you.

    Best regards

    Carol

    Hello Carol

    Just in a few words: If your laptop is preinstalled with Vista original recovery image please make sure that the HARD drive has two partitions (C and D also check disk management). Windows XP must be installed on the second partition. For the installation of Windows XP Home edition, you need Storage Manager. Without this Storage Manager disk HARD won't be visible for the installation of Windows XP Home edition CD.

    On this forum, you will find number of threads with the exact description how do.

    At the end you must start Manager. Using this boot manager, you will be able to choose which operating system you want to use.

    If you have any other questions please post again.

  • Equium L350 - 10L - memory upgrade question

    Hello

    I have the Equium L350 - 10L. Is it possible to upgrade the memory on my laptop. For the moment, it has 2GB (2x1GB).

    Thank you

    Of course you can upgrade the RAM.
    Did you look in the manual that was stored on the laptop?
    I think that you should do this it can you did many details, photos and any other information regarding the upgrade of RAM.

    Check the memory extension Chapter 8 option aircraft.

    In addition, you should know that if you would upgrade the RAM to 4 GB then your 32-bit Windows system will see ONLY 3.2 GB.
    So if you want to use full 4 GB, you will need to change the operating system to 64-bit.

    In my opinion, 3 GB of RAM are more than enough

  • Re: Equium L350 - 10L - start with battery power

    I just bought an Equium L350 - 10L. When he arrived, he has been turned on using the battery and started installing Windows. However, the battery expired and I can't cross the message of "close unexpectedly" even after reboot.

    How can I go back to square one and restart the installation process? Advice.

    Oh buddy, a stupid idea. I really do not understand you. After several weeks or months in the box, maybe it makes sense that the battery cannot run with full capacity.

    In any case, connect your laptop to power supply and leave it for a while. Departure for laptop to see what will happen. If the installation process can not be finished early new laptop computer and immediately press F8. First option to choose repair my computer and follow the on-screen menu. The OS will be installed again and you will be able to complete the operating system installation process.

  • I need drivers windows 7 for hp pavilion 17-f000sv

    I need drivers Windows 7 for HP 17-f000sv.  Customer does not have the Windows 8, which has been installed on the machine.  I partially installed Windows 7, but takes the appropriate drivers to finish the job.  Someone on the forum can tell me where to get them?  I'd like to install another motherboard to work around the problem.  Thanks for any help.

    Hello:

    First, install the AMD chipset drivers and restart.  You want the first file on the Web page.

    To install the smbus and usb 3 controllers.

    http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2064

    Graphics... Manually install the graphics driver W8.1.  If you need assistance with this, please let me know.

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-135622-1&cc=us&DLC=en&LC=en&OS=4158&product=7171849&sw_lang=

    Audio: Accept the agreement.  Download and install the driver for the second on the list.

    http://218.210.127.131/downloads/downloadsView.aspx?langid=1&PNid=24&PFID=24&level=4&Conn=3&DownTypeID=3&GETDOWN=false

    Ethernet: DL and install second driver on the list.

    http://218.210.127.131/downloads/downloadsView.aspx?langid=1&PNid=14&PFID=7&level=5&Conn=4&DownTypeID=3&GETDOWN=false

    Card reader: DL and install the driver first on the list.

    http://218.210.127.131/downloads/downloadsView.aspx?langid=1&PNid=15&PFID=25&level=4&Conn=3&DownTypeID=3&GETDOWN=false

    Webcam:

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-135497-1&cc=us&DLC=en&LC=en&OS=4158&product=7171849&sw_lang=

    3D driveguard:

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-131788-1&cc=us&DLC=en&LC=en&OS=4158&product=7171849&sw_lang=

    I don't know what model of wireless card that model uses, so please view the ID of the hardware for the network controller and I'll post the link for the driver, there need.

  • Need Driver Wireless Lan for Satellite C670D-126 for widows 7-64 bit

    Need Driver Wireless Lan for Satellite C670D-126 for Widows 7-64 bit PSC4AE
    I can't download the file driver Lan Wireless page

    Thank you

    The Satellite C670D-126 laptop supports Atheros AR9285 802.11bgn / Bluetooth combo card.

    You can download the driver here:
    http://www.MyToshiba.com.au/file/Download/Resource/File/19301/tc00384500f.exe

  • Need a new mothherboard for Equium A60

    I tried suggestion given in the forum but I am always sick, I think I need a new mothherboard for Equium A60, I searched on the Toshiba site but tere does'nt seem to be links or place where it is said you can buy a home, HELP!

    As much as I know, that you cannot order parts for laptop direct from Toshiba.

    You can do this in some independent electronic store, perhaps by approved maintainer Toshiba or on eBay. I recommend you check out eBay. Here you can find many hardware components for various Toshiba laptops.
    With a little luck you can find mainboard for your model of laptop also.

    Check it out.

  • Equium L350 - 10L - Windows install without floppy USB drive

    Hi guys,.

    Recently bought a L350 - 10L and I want to upgrade to Windows XP, Vista. ;-)

    I know that I need the Intel Matrix Storage Manager drivers loaded during the installation of XP, but I don't have a USB floppy drive. I tried to use USB key, but with little success. Is it possible to do this without a USB FDD or having I have to bite the bullet?

    Thanks a lot for your time,.

    Leon rice
    [email protected]

    I agree with kody. On this forum, you can find fantastic son with the description Specifies how to use the program nLite for the installation of Windows XP Home edition. Simply use the advanced search option.

Maybe you are looking for

  • Cryptolocker - how to enable installation of ff

    HelloHow can I install Firefox when the Organization decided to block the exe to run in the paths below.I read the article here: https://support.mozilla.org/en-US/questions/976490but when I try to export the files from the exe itself - I get an error

  • Need schematics for a GPIB-422 CT

    Hello, does anyone know where to find patterns, at least for the section Serial i/o, an old controller GPIB-422 CT. The pinout of the RS-422 connector will be apprecianted.

  • E260v2 the display is in mirror image.

    I got this e260v2 more than five years and it worked fine. All of a sudden the screen is mirror image. While everything else seems to be functional, it's annoying to have to check the screen in a mirror to see what he says. I tried the reset from the

  • merger of two primary partitions

    Hello My system is: dell inspiron with vista sp2. My c: contains the operating system and d: contained once dell recovery drive. I managed to delete d: however I couldn't do c: to extend to the newly allocated. So I finally D: formatting again. Now m

  • Printer: try to connect a HP Mini laptop with a HP Photosmart C4380 printer.

    I have a laptop HP Mini and I have connected an HP photosmart C4380 printer by plugging the cable from the printer to my computer and follow the instructions to install it.The installation went well but when I try to print, there is an error message