Need for EMERGENCY assistance... some pictures are green

Similar Questions

• Plugin Silverlight continues to crash when adding an attachment to the e-mail despite uninstalling and reinstalling silverlight and firefox 4 and other recommended troubleshooting. Need for emergency assistance. Thank you

  About adding attachments to e-mail hotmail, the page does not. On closing program I am informed that the silverlight plugin broke down. Have reloaded and sent reports to both microsoft and firefox, tried all troubleshooting recommended, uninstalled and reinstalled the latest silverlight and firefox 4, but on the attachment after each step into train silverlight continues to crash. Tried the attachment on the yahoo email, same thing.

  It is a question really old, but anyone with this problem should try updating to the latest Firefox and the latest Silverlight. You don't usually see problems when both are up-to-date.

• For your security, some settings are controlled by group policy

  I want to install Security Essentials.
  I am running XP HOME Edition Service Pack 3 on 2 computers on a network at home for almost a year. I have One Care. When I start the computer their direct initialization on the desktop.
  I know that I don't have the Group Editor and there is no way to get installed it on XP HOME.
  For the last 2 weeks, when I click on Windows Firewall in Control Panel, on two computers, the settings window appears but there a warning on top "for your security, some settings are controlled by group policy" and the selections are grayed out, and the firewall is disabled.
  I have no firewall problem turn on or turn it off in One Care on computers. I've deleted and reinstalled One Care, and even when One Care is removed on both computers I get the same results with Windows Firewall.
  I even replaced the firewall router had to this router.
  Nothing not done, I ran Rgeg priest and anti-Malware.
  I got a response saying to run "mmc", but nothing happens.
  I even spent 5 hours on 2 days with a care that told Finally I must contact support XP and I have had no reports of them support.
  I tried http://windowsxp.mvps.org/resetfwpol.htmon both computers, the Windows Firewall Branch returns to regedit after a reboot and Windows Firewall is still gray.
  I would like to delete One Care and install Security Essentials, but I fear that I can find with no firewall.
  Help, please!

  Mike,
  Me again!
  I removed One Care on both computers, rebooted, installed MSE, rebooted, did a quick auto scan, showed no problems. The Windows Firewall still has the statement "For your security, some settings are controlled by group policy", but the good news is the firewall is on and I can't turn it works!

  Now I can run chkdsk on both computers.

  The Linksys router has SPI Firewall. Should I so on only the SPI Firewall Windows Firewall?

  Furthermore, I run RegClean once a week. Do I need to continue to operate that?

  Don

• Newbie... When I open Lightroom all my pictures are green

  I got lightroom for a few years, but haven't learned how to use it a lot.  I have loaded some pictures on it for a few years and have used Photoshop to edit.

  About a month ago I loaded photos above and they were all green.  I thought I did something wrong with the camera, but then I noticed that now, all images in Lightroom were green.  BUT when I open them in photoshop, they are very good.  I don't know if I was doing something by accident, I tried looking for adjusting to change and he found nothing.   Any thoughts on why my photos are green?

  Peace ~ Carl

  Or if you have never calibrated your monitor, go to the tab color management of advanced display properties in Control Panel and change your profile showing default sRGB-all instead of a display manufacturer profile which is probably too old to work with LR.  How to configure it to sRGB depends on if it is already listd and is not the default value or if sRGB is not registered and you have to add first.

• A beginner... need for basic assistance

  I see that my camera Sony's AVCHD a 'private' of the file yields that, once seen from within Premiere Pro or prelude of yields. MTS files which can then be swallowed. So far so good.

  My question is help on the most basic level, to help me get started with Prelude. All I want to do is to get a glimpse of these files in the prelude. They keyboard shortcut to place point doesn't seem to be a simple 'I' or 'o' as it is as a prelude - is this true? I'm having trouble getting this simple step to work. Then, I would like to make subclips and I see the number key 1 is the marker for the beginning of a sub-clup, but what is the marker for the out point of a subclip? The interface is nice and this could be an excellent software to learn, but this is easier to do in Premiere Pro and just eliminate the need for Prelude?

  Maybe I need a video tutorial, but also, perhaps the questions I ask here are too basic for a tutorial.

  Can someone please help me with just these questions early so I can see the value in using prelude?

  TIA,

  Ken

  Ken > prelude allow you to ingest your assets (either via Basic linking, copying or transcoding), batch rename them it's make and apply a system of metadata personalized for them. You can't do these things first. In addition, the development of interface on logging, which makes this task easier.

  And out of the points only have meaning in the capture Panel, where you can specify an in or an exit if you do not want the whole media to be ingested. The shortcuts are indeed I and O. You do not change anything that happened first edit as a prelude, so to point on media ingested is not really logical, use subelements markers instead. I and O in prelude is used to set these points and exit markers.

• Microsoft Natural 4000 ergonomic keyboard with IntelliType 8.15 64-bit for Windows 7, some keys are not function (new, open, undo, redo, fence, etc.) in Office 2010

  Hello MSFT sensi.
  I need help. I have the Microsoft Natural ergonomic 4000 keyboard with IntelliType 8.15 64-bit for Windows 7 installed. I run on a brand new i7 with 9 GB of ram and 1 TB of hard drive.  I just installed Office 2010.  Have you tested this keayboard with Office 2010?

  I bought and returned 2 of these keyboards at my local dealer and two keyboards have the same problem. Preconfigured keys (help, undo, redo, new, open, close, reply, fwd, send, spell, save and print) F1 - F12 do function not all as they are indicated in MS Word 2010 etc. I was able to program my favorites 1-5 with little problem.

  I did the following to try to resolve the problem:
  1. research of virus (clean)
  2. uninstalled the driver and downloaded the last strand 8.15 64
  3 entered the keyboard layout configuration and reset the default settings
  4 tried to manually program the F1 - F12 function keys

  NONE of these things solve the problem.  Which brings me to the conclusion that this keyboard does not have to be 100% compatible with Office 2010.

  Any suggestions / feature of configuration problems feature keys?

  PS. No, I didn't record this keyboard, because is it not there no solution - he goes back to the retailer.

  To the right of the function keys, there is a key LOCK.

  Toggle this button to toggle between the keys F1 to F12 with their usual function and the functions listed in the relevant programs.

• all my pictures are green,

  I too have all the photos of Greens, I've changed all the colors but still green, I'm not too smart with computers, so I darent do too.

  Hello

  ·        What operating system is installed on your computer?

  ·        You did changes to the computer before the show?

  ·        It happens with all of them or any specific image?

  ·        Which application do you use to see all the photos?

  I suggest updating the graphics card driver and check if it makes a difference:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Post back with the required information so that we can help you further.

• I need pleassssssssssssssssssse emergency assistance!

  I have a laptop \dv3655ee\, but the internet adapter had a few bad advanced properties. This causes an interruption in Internet always.

  Please I need someone to help me with this problem. I have (R) \Intel AGN\ 5100 WiFi driver and also \Realtek RTL8168C (P) Family PCI-E Gigabit Ethernet NIC (NDIS 6.0)

  I need to know what is the right of the properties given for these two pilots. I will be grateful if someone me the list.

  Pleassssssssssssse help me with this.

  Thank you very much...

  Uninstall both drivers.

  Resources:

  Uninstall or change a program on Vista
  

  Uninstall Intel® PROSet/Wireless Software

  When Yiu will make that install drivers from the bottom:

  Intel chipset (Install and reboot before other drivers) here

  Intel Wireless 5100 here

  Realtek RTL8168C Family PCI - E Fast Ethernet NIC here

• The name of my pictures are green

  Recently, I am not able to copy or to see my photo in my PC it says access denied

  Hello

  I will only refer to answer here-

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-files/window-Photo-Viewer-cant-open-this-picture-because/05e31f84-75ab-4772-84a5-5ce0e6e71f61

  In addition, you can try a new user account as well.

  Let us know if it works for you.

• Request for emergency assistance. -CS6 adobe Master Collection - please insert the disc

  Our company has downloaded Adobe CS6 Master Collection for deployment on our image master this year.

  When you try to install using the files we downloaded and ran the disk hard that the installation said "Please insert the disk", it should not be necessary, as I already have all the files required to install on my computer.

  I need a quick fix to what I have to get this master image made and deployed next week or two and I have hundreds of machines to do on.

  It's a clean install and so there is no problem of compatibility with previous programs, I tried looking for installs it individual programs themselves in cases without success, I had a similar problem with the Autodesk products that I solved it by installing the trial version and then upgrade to version full immediately after installation. I have not tried that with this problem but I'm sure there is a better way to solve the problem. At least I hope there is. Please get back to me as soon as possible with this because I have to get this sorted out within a very tight timeframe.

  Hello ksatech,

  a first information please read this: Re: CS6 install question asking to insert the disc, but install desktop.

  Good luck!

  Hans-Günter

• Flash HTML 5 Canvas banner for emergency assistance

  So I have a banner which must go to the next section and stop (html5 canvas flash) and he continues to go to '0' - and no framework 221 - then my video on 221 I need help how to get my mp4 playing on 221-HELP.

  html5 frames begin with the number 0, not 1.

  So what looks like the 221 on your pro flash timeline frame must be referenced by 220 in your code of createjs.

  If you do not understand how to use this info, copy / paste the relevant code goto.

• Import of LR (from Nikon P340) distorted some pictures

  Some pictures are getting seriously more distorted look that I see.

  Not develop settings have been applied during the import.

  There are two problems in a few photos.

  Photos taken inside at night without flash that has a slight yellow cast (such as seen in NX2) have a yellow cast, exaggerated in LR.

  The biggest problem is that LR has ADDED significant barrel distortion (if that's the right word, the vertical lines become markedly curved).

  No idea what I am doing wrong?

  This happens on files, not files JPG.   They look very well (as in the even as far I can tell that in NX2)

  ...

  A related question... I had saved NRW + JPG files on the camera but LR will not import the JPG. It is important only JPG where there is no NRW file.

  (To see that the distortion was only on the NRW files I had to remove, move the file JPG files in a different folder on their own and then import JPG files).

  How can I get to import both?   (Usually, there is no need, and probably once Ive got everything under control I can drop the JPG file, although it helps when, leafing through the folders in Windows Explorer, but I think it's a whole other issue)

  What you see is a normal behavior. RAW files have a JPEG preview in them first, Lightroom displays when it generates an overview of raw image. Your camera has the ability to make these corrections lenses, and they are applied to the JPEG and JPEG preview in the raw file. However, Lightroom does not read these lenses for the raw image corrections. The reason is that each camera manufacturer stores corrections in a different location, so rather than trying to create a complete converter for every model of camera that is released, Adobe chose to simply ignore parameters which are owners. And the lens correction parameters are owners. As I mentioned previously, it will be necessary to use the lens correction tools in Lightroom to compensate for these problems. If you find a setting that matches then you can create a preset that you can apply to the request.

  Just another note, if checking "enable the correction of profile" solves the problem, just check this option and then save the new camera default values. Then, the profile corrections will be part of your default settings

  .

• Assistance needed for the registration of the application and store the values in a table

  Hello

  Hope that this explanation is not confusing. I explained my application you want in the text below and also attached a skeleton VI + screenshot hoping that he will clarify

  I try to do a VI that does the following:
  1. some code (blue Subvi) runs every 200ms
  2. every 200ms, a random number is generated
  3. the random numbers are stored in a table in intervals of time s 0.8 ("iterations")
  4. at any time, the (blue Subvi) code needs to have access to the random numbers generated in 'the previous iteration.

  To clarify, the iterations are as follows:
  Iteration #1: 0 - 1.8 s
  Iteration #2: 2 - 2. 8 s
  Iteration #3: 3 - 3.8 s

  Iteration #4: 4 - 4.8 s
  ..
  And so on...

  So for each iteration: the blue (Subvi) needs to have access to the random numbers generated in the previous iteration, for example:

  Iteration #1 (0 - 1.8 s): The blue (Subvi) Gets an array that contains only the zero (random numbers are recorded for the first time)
  Iteration #2 (2s - 2 8 s): The code gets an array containing random numbers of iteration #1
  Iteration #3 (3 s - s 3.8): the code gets an array containing random numbers of iteration #2
  Iteration #4 (3 s - s 3.8): the code gets an array containing random numbers of iteration #3
  ..
  And so on...

  At any given time in time;
  -The code gets an array that contains all the random, recorded during the previous iteration numbers
  -Values since before her previous iteration are ignored and not stored anywhere

  Thus, for example, to the #7 iteration:

  -The values during the iteration #6 are made available to the code in the form of a table

  -Values of #1 to #5 iterations have been deleted and not stored anywhere

  It is important that all values since before recording the previous iteration are deleted because they are not necessary because VI actaual will work for a long period of storage of numbers a lot more than I have indicated here

  Screenshot of the skeleton VI:

  

  I tried to play with the paintings, the structures of the case and the registers at offset, but everytime I try I get something wrong

  The skeleton VI is also attached (Iteration_VI and Code_SubVI)

  Any suggestions?

  Thank you!

  Yes, I agree that you need help.  First of all, you really do need to learn more about LabVIEW - spend a few hours with the tutorials, such as those mentioned on the first page of the Forums.  Oops - links to the tutorials which had been present for years seem to have been moved "elsewhere" with August 2016 LabVIEW community reorganization.  But look for them...

  Here are a few screws that basically implement what I described above (with some minor modifications).  First of all, this is a Top level VI which runs at 5 Hz (200 msec waits).  It starts with an array of 5 elements of 0, then once per second, this is replaced by a table of random numbers generated by the Random 5-table sub - VI 5 elements.  Note that I do not use a loop timed - those who are really designed for LabVIEW RT, but use the simplest functions on the Palette of the timer.

  

  Can't you see how that works?  The array to initialize on the left begins you with a table of 5 elements of 0.  The Timer inside the loop, it runs at 5 Hz, 'Index' counts 1, 2, 3,... to tell you where you are, and 5 shows you everything that lives on the shift register.

  Now sub - VI Random 5-table is supposed to do the following - if she was called to 5, 10, 15,..., it must return a (new) array of 5 random numbers, otherwise, it must return the array that was passed in.  So if all "works", table 5 shows 0, 0, 0, 0, 0 for the first second, a table at random for the second second (which is not superfluous!), a different for the third random picture second and so on.  I have already said a way to build this, but I chose a slightly different method (equivalent).

  

  Whenever it is called, a new random element is generated and added at the end of a (growing) random table stored in the shift register.  If size become 5, we send this Random-table-of-5 out through Out table and reset the register shift to an empty array.

  The case by default (when the size is not equal to 5) is shown below - we just return the array of entry to and accumulate new random table in full growth.

  

  These code fragments extracted from VI.  If you have LabVIEW 2016 (see the "2016" at the top right of the image?  This shows that it is a snippet of code LabVIEW 2016), you can open a blank diagram and drag this image, where magic OR converts it to a VI.  Otherwise, the code yourself and try out it.

  Caution - it is designed to run once.  If you run the program of high level, a second time, you may find that the new Random 5 - table appears to 0.4 ", 1.4", 2.4"(instead of 1", 2 ", 3").  I leave as an exercise for understand you to (a) why he is and (b) fix the code.  If you can't do that, then move an another 3-4 hours with the LabVIEW tutorials (or start playing with this code, edit it in some small way and to understand how it works).

  Bob Schor

• Why do display some pictures slideshow in screensaver for Windows Vista?

  Why do display some pictures slideshow in screensaver for Windows Vista? The photos in question were taken with my Android phone.  They appear very well when you view the pictures folder, but do not appear when I use the same folder for my slide show in my screensaver.

  Hi NoSpinHere,

  1. Did you the latest changes on the computer?
  2. You receive an error message when you view these photos?
  3. Are you unable to view photos taken from the Android phone?

  Check out the link and run the Fixit tool available, check if it helps.

  Windows Photo and slideshow problems

  http://support.Microsoft.com/mats/windows_photo_and_slideshow_diag/

• everything is so big (words, etc.) that some things are cut. Help. Im not a computer buff so this can be simple for someone else.

  everything is so big (words, etc.) that some things are cut. Help. Im not a computer buff so this can be simple for someone else. For example... this screen as I'm typing this on Cup right now to the right of this box, I type in where it says "search forums" after the R in the forum.

  Hi 1958debbie,

  you don't need to do a system restore.

  Below, to the right of your screen, there is a % of films xxx next to a down arrow. Click this arrow and select 100%.