Need help: apply a Texture of grid on Photo

Similar Questions

• I need help in creating one (Table / Grid) using Flash Builder (not a datagrid)

  I'm looking for a way to create a dynamic table / grid somewhat like a sheet or spread html table. but I want to create all the cells via a loop.

  The following diagram was created using php to execute a loop and writing on the cells and the duration for each cell in the grid/table. But I have no idea where to start in flash builder to build something like this.

  Some cells will last 2 to 4 columns as shown in the following diagram.

  

  Any suggestions on how to create this type of table or grid in Flash Builder?

  I looked through most of the components, but I'm not sure which component to use.

  Help in this would be greatly appreciated.

  Thank you to

  Maurice

  It's ok, I thought about it.

  just by using containers grid Flash builder 4.5

  

• Need help with the texture of the hatching

  I'd appreciate some tips or tricks (Win7, PS CS6).  I try just for fun to recreate a texture similar to this:

  

  (This is a screenshot of http://www.myfonts.com/fonts/ahmet-altun/gulyesa-script/)

  I tried to start by noise on a background layer and using different filters (motion blur, hatch, fiber), but the closest I have is the following, which is not what I want. :

  

  I well remember seeing a tutorial once in these forums, but I'm not and I don't remember how it's done.

  Here is the tutorial! :

  http://CreativeTechs.com/tips/tip_resources/Photoshop-techniques/Photoshop-techniques-008. PDF

  (you're going to want to "woven wire")

  link to useful texture/models:

  http://www.Peachpit.com/articles/article.aspx?p=170987

  -janelle

• Need help making the DIMENSIONS of a smaller photo.

  I'm trying to post a photo JPEG on my LinkedIn page. I get a message saying that the dimensions of the photo are too big. I tried following the directions in the Windows Photo Gallery to make the picture smaller, but as SOON as I click on 'Apply' takes the smaller area I chose and breath this area more room back to the size of the original. Can someone tell me how the DIMENSIONS of a smaller photo. I don't really like it if the whole photo or a cropped the photo version. I have windows vista. Thank you!

  Rather than crop the photo... try to resize the photo...

  In Windows Live Photo Gallery... Right click on one or more
  selected inches... Choose... "Resize" in the menu. Choose
  one size, navigate to a folder to save in left click the ' resize
  Save "button. (I suggest that you save the resized pictures
  in a new folder to prevent the replacement (replacement) the originals)

  Take a look at the following link:

  Resizing Photos in Windows Live Photo Gallery
  http://blogs.msdn.com/PIX/archive/2007/11/30/resizing-photos-in-Windows-Live-Photo-Gallery.aspx

• BlackBerry Smartphones need help with Media Sync please - cannot sync photos

  I just installed the latest version of desktop software, version 6.0, and when I click on the buttons to sync photos from my blackberry on my PC, it says there are no pictures... I have dozens of photos on the device and I really want to get down them as soon as POSSIBLE... Please help

  Try disabling Mass Storage. Is encryption always enabled for media files on your device?

  If it is, Roxio should ask the encryption password to allow you to access the media card.

  When this happens, all media must be visible...

• Need help to find my serial number for photo shop 12 elements

  Photo shop elements and can't seem to find where I can get my serial number so I could download the program. I'm starting to think I m stupid, I followed the instructions, but the only number that I have the code redemption. Can anyone help with a simple solution that I can follow. Thanks in advance. The program I have is elements 12 but the disk information says that I have 11 items?

  Bill

  Redemption Code http://helpx.adobe.com/x-productkb/global/redemption-code-help.html

• I need help to find out why my Canon photos will not display on my Picasa account

  I have a Canon Ixus 1100 HS and I'm trying to put them on a screen of Windows 7

  [Moved from the forum comments]

  Contact support Picasa.

• Need help correcting Date taken on the imported photos.

  The dates on the pictures imported for albums aren't dates that I took them. Tried automated FixIt program twice, but it has not solved the problem.

  Can someone guide me through this?

  CA

  Have you tried to use the Windows Live Photo Gallery?

  Left click the Info button on the toolbar to display the
  right pane. Select a picture and change the date in the
  right pane.

  Windows Photo Gallery change the date and time a photo was taken
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-the-date-and-time-a-picture-was-taken

• Need help for import that were previously imported photos and then deleted

  I am trying to import a few photos that I initially imported... then deleted (off the coast of LR and my HDD + remove my trash). LR says already imported photos, but I know for a fact that they have been deleted and I want just their reimportation. Is there a way to get around this? IMO

  If you erased them from your computer by using your browser in the system, then Lightroom perhaps even previews of the files. Did you remove them from Lightroom using Lightroom?

• Making the ear of corn and need help with the ball.

  I do some corn on the COB for an illustration and I need help with the texture of the ball. I've been slowly making progress with gradient for kernels mesh, but I can't seem to recreate the look of the ball at all. I tried to recreate it in a rectangle by using the option in the menu object (1 row, 50 columns) gradient mesh and I'm trying with the fusion in object mode, but not lucky yet. Can someone help to put me on the right track to make the texture:

  

  

  

  I've been slowly making progress with gradient for kernels mesh, but I can't seem to recreate the look of the ball at all.

  Tank,

  You have published three images stylistically very different. The first is photographic and call probably (but not necessarily) for graduates of mesh. The other two are graphical treatments (and frankly, they're both rather flat; lack of depth).

  Illustration style extends the range of cartoonish in sketchy photo-realism and all the rest. The problem is you didn't show your own attempt so that anyone can have an idea of what you're trying to achieve the stylistic point of view.

  I just need to put in place so that the final step does not appear the whole box. The problem now is trying to make the style of the good brush to reproduce the effect...

  You seem to think you have to build a kind of linear construction and then find a way to reshape the shape of each part of the leaf. Yes, you pouvez approach it this way, but Illustrator users has often tend to be what aunt Molly would call "too clever by half."

  Not everything must be something semi intelligent auto or complex and tedious consruct involving brushes, envelopes, masks, etc, etc. Much can be accomplished by thinking that he just thanks to measure you draw directly economic paths and constructions, which take no more time (often less) and result in very tidy, simple files. Again, a lot depends on what you are trying to achieve the stylistic point of view. But here's an example that only took a few minutes to draw:

  

  

  

  

  

  If the above consists of:

  Three roads closed, 8 points each, with ordinary linear degrees

  Three mixtures of open path with three anchor points for each key path

  Six paths closed for shadows / highlights, with 19 points in total

  Mixtures being directly from the paths drawn comic forms, the spacing of the veins 'automatically' and intuitively follows the width from point of view of the worksheet.

  Rather than to build a boilerplate brush, colouring and the weight of each of the three main paths of the vein mixtures can be set individually at any time, simply directly by selecting the key path.

  JET

• Need help to apply the menu option

  Hello

  you will need to apply the menu option by clicking on 'V' image and close the menu option by clicking on the image itself. I did everything but not able to do this menu option can you please help... I have attached my code

  I have

  Have you tried the code that I wrote for you?

• Help needed to apply the filter condition

  I need to apply a filter condition based on the database environment:
  1. only if the database name is UAT tb1. > 23 - OCT-2012 CREATED_DT.
  2. only if the database name is OATS then tb1.application_no in ('1 ', ' 2')
  3 If the database is a different database then these conditions do not apply.

  Try this

  Select  tb1.*,tb2.* from tb1
  join tb2
  on (tb1.col1=tb2.col1)
  join (select  case when global_name='UATDB' then 'UAT'
                           when global_name='QATDB' then 'QAT'
                           else 'OTHERDB' end DB_NAME  from global_name) DB
  on 1=1
  where (DB.DB_NAME='UATDB' and tb1.CREATED_DT > 23-OCT-2012)
  or (DB.DB_NAME='QATDB' and tb1.application_no in ('1' ,'2'))
  or (DB.DB_NAME='OTHERDB');
   
  

  Note: not tested code

• Need help with the port forwarding for a XBox remote Streaming

  I have a router R6200v2 and need help with port forwarding.

  I came across this set of instructions for setting up stream port forwarding XBox remotely from anywhere

  http://kinkeadtech.com/2015/07/how-to-stream-Xbox-one-to-Windows-10-from-anywhere-with-Internet/

  I have no idea when it comes to such things and I want to make sure I do it correctly without messing up my existing home network.

  Port Forwarding and triggering Port pages setup look very different from what the guy uses. Can someone walk me through what I do to set up please?

  Hi @varxtis,

  You must enter them in the field for a start external Port and external completion Port. You will need to send individually except for the range of 49000-65000. The steps are as follows.

  1. create a Service name (it could be something else that you cannot use the same service name twice. Ex. XBOX1, XBOX2 and so forth.)

  2. Select the type of service (TCP, UDP or both)

  3 entry 5050 times a start external Port and external endpoints.

  4. Select the IP address of your XBOX.

  5. Select apply.

  6 do the same for other port numbers. To the beach, use 49000 for the external departure Port and for the external completion Port 65000.

  Kind regards

  Dexter

  The community team

• I need help for the upgrade of my current system.

  I need help for the upgrade of my current system.

  I have SBS 2008 with (Exch 2007, SQL 2005, Sharepoint, backupexec 2010 for sbs) licenses.

  I want to make the larger environment using the following:

  (1) apply Virtualization

  (2) apply to the failover process (clustering)

  "(3) the environment must support adding server terminal server, ERP server, exchange server, domain controller, backup manager.

  Storage 4) that supports Raid (1 and 5)

  UTM excellent 6) that supports (SSL VPN, VPN Global)

  suitable backup solution 7)

  (8) good antivirus for clients

  my questions:

  (1) can you provide me with a good design for this environment

  (2) should I choose what operating system:

  Microsoft datacenter or company

  I know datacenter provide us the unlimited VM but needs per processor license

  so if I have two Grouped servers I want to buy 4 licenses

  and just 4 VMs per company license... to say that we have two servers and maintain 8 vms so wat happened if 1 goes down... How can I migrate the 4 virtual machines on the server failed to another server group... ? should I buy enterprise license?

  (3) if I get the SAN storage for data... How can I save this storage... should I get another SAN?

  (4) how can I upgrade SBS stad single server (windows standrad) without losing the licenses as Exch 2007, SQL 2005, sharepoint.is it a must to buy an edition full std server or there is a way to upgrade (license wise, I mean)?

  (5) what about win2k8 license for VM:

  lets say we have physical that has windows license so that enough to have windows for VM or should I buy windows for VM licenses?

  (6) can I use backExec license for SBS with windows 2008 standard

  (7) who better to virtualization AMD or INTEL

  (8) hyper V or VMware?

  (9) what of Microsoft data protection Manager... is this good?

  (10) what virtual machine manager? What are the benefites keys

  Thanks in advance

  Hello AnasAI,

  You can find the Server forums on TechNet support, please create a new post at the following link:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• Need help to install KB979906 in Windows 2000 and Windows XP

  Original title: need help various updates

  I need assistance with windows'xp Microsoft. NET Framework1.1 spI update security for windows 200 and WindowsXP {KB979906}

  Hello
   
  1. What is the error message you get when you try to install the update?
   
  First of all, note the .NET Framework versions that are already installed:
   
  How to determine what version of the .NET Framework is installed and determine whether the service packs have been applied
  http://support.Microsoft.com/kb/318785
   
  In the meantime, follow these methods to solve the problem.
   
  Method 1:
   
  Temporarily disable any security software and then try to install the updates.
   
  Note : Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  Method 2:
   
  a. open administrative tools by clicking the Start button, click on the Control Panel, and then clicking Administrative Tools.
  b. double-click on Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  c. right-click on the Windows Update service and then click on stop.
  d. Click Start, and then click principally made programs, then click Accessories, and then right-click on command prompt and choose Run as administrator.
   
  Type:
  
  net stop wuauserv
  regsvr32 c:\windows\system32\wuapi.dll/s
  regsvr32 c:\windows\system32\wuaueng.dll/s
  regsvr32 c:\windows\system32\wucltux.dll/s
  regsvr32 c:\windows\system32\wudriver.dll/s
  regsvr32 wups2.dll/s
  regsvr32 c:\windows\system32\wups.dll/s
  regsvr32 c:\windows\system32\wuwebv.dll/s
  net start wuauserv
  
  output
   
  Restart the system and see if it can be updated now.
   
  Method 3:
   
  Now see method 2 in http://support.microsoft.com/kb/923100 .
  After running the tool that is appropriate and necessary, (re) install all versions of the .NET Framework manually by using the download links on the page.
   
  Method 4:
   
  Download and install the stand-alone package.
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=5e55ee58-f00a-4237-BDDC-492b63a18b96&displaylang=en
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]