Need help Cant Hard Drive when formatting Poweredge r720

Hi guys,.

I need help in formatting of our server I think I messed something configuration or delete.
We have poweredge r720 server in the office and we want to reformat the drive to become the new server. Here's what I did:

1. during startup, we go to lifecycle and configure raid 0 (we have 3 HDD)

2. the system starts fine and the server installation of the operating system that we have. (but we cannot see the 3rd disc because we believe disk 2 = Raid 0 and we try to see the 3rd disc as a second partition but it is not shown, we just decided to recreate a raid 5 to see what is happening.

3 create. us raid 5 through the lifecycle in the start menu. but we get errors and we have in stock here: the error is SWC0015.

4. Please help... I tried to boot to the operating system before, but we can not sound already remove cause maybe I'm kidding not within the parameters of the life cycle I think.

Thanks in advance

downloads.dell.com/.../SAS_RAID_Driver_R2_1HHG8_A05_6.802.19.0_ZPE.exe

Tags: Dell Servers

Similar Questions

  • NEED HELP! Hard drive failure Alienware 17

    When I start my computer it really takes a lot of time for anything to be taken and eventually I get a blue screen and the process restarts itself. So after a few violins and research, I found out how to run diagnostics.

    That's what I got when my hard drive failed the test

    Error code: 2000-0142

    Validation: 70303

    Please help, it's been a few months since it happened to save enough money to get a new hard drive. I just bought 3 Witcher in time and I'm sick of not being able to play you will understand my urgent need for assistance.

    Hello

    Unfortunately, this error can mean a hardware failure with the hard drive. The recommended procedure is to replace the hard drive. If your system is under warranty, send me a PM with your service tag to get help.

  • How to format a hard drive when you're locked volume popups?

    How to format a hard drive when you're locked volume popups?

    Looks like you are trying to format the disk that contains the system volume of in WinXP.  You can not.  It would be the computer equivalent of sawing off the branch of the tree, you sit and WinXP is "too smart" to enable this.

    After saving all the data you want to transfer to the new installation of the OS, simply boot from the Windows XP installation CD.  You will be offered the possibility to delete, create, and format partitions as part of the installation process. (You may need to rearrange the order of the boot devices in the PC BIOS to boot from the CD.)

    How TO install Windows XP
    http://support.Microsoft.com/default.aspx?scid=kb;en-us;316941

    http://www.michaelstevenstech.com/cleanxpinstall.html

    http://www.webtree.ca/WindowsXP/CLEAN_INSTALL.htm

  • I replaced my hard drive and format my computer before turning off the software PS.  It need my code series now, but I had lost.  How can I solve the problem and use the software again?

    I replaced my hard drive and format my computer before turning off the software PS.  It need my code series now, but I had lost.

    How can I solve the problem and use the software again?

    If you use a perpetual Photoshop and formatted your disc version of starting without disabling your activation of Photoshop, you also Adobe supports help you activate Photoshop once you retrieve your serial number.  The startup disk formatting would destroy that credential of Activation Photoshop machine which is registered in the database of the Adobe activation server. Which reduces the activation numbers you have to use.  If you have Photoshop installed on a second computer that means that you have no free activation available as well, even with your key you can't activated the machine.

  • MacBook retina cannot find the USB hard drive when it is plugged again

    Hello world

    I have a MacBook retina 2015 computers and a hard drive WD elements USB3 that I use as a Time Machine backup when they travel. The drive is plugged into the USB - C through one of the Apple dongles and when I first start the computer, the USB is mounted and that it appears on the desktop. He does everything very well.

    When I want to take the machine away, I eject it, wait for the secure message and then physically disconnect the drive. However, when I go back and reconnect the drive, the Mac did not see it. The reader will be able as the light comes on and I can hear it turn. Just, it is not mount and is completely invisible for MacOS.

    I checked all connections, even used another dongle - no luck. A disconnect does not set, and I tried to reset the NVRAM. So far, the only solution is to reboot the Mac, afterwards the player reappears - at least until I need to unplug it again.

    Anyone got any ideas what is underway and if there is a fix?

    Thank you very much

    Mike.

    Hello, Mike Richards2,.

    Thank you for using communities Support from Apple!

    This is I think understand that you are not able to see an external hard drive when it is ejected, and then reconnect the computer.  I have some suggestions that I hope will help you.

    It is important to try to isolate what is responsible for this.  The first thing to do to help isolate what is causing the problem is to start the computer in what is called Safe Mode and see if the problem persists.

    Start in safe mode:

    1. Choose the Apple menu > shut down.
    2. After your Mac stops, wait 10 seconds, then press the power button.
    3. As soon as you hear the startup tone, hold down the SHIFT key.
      You must press the SHIFT key as soon as possible once you hear the startup tone, but not before.
    4. Release the SHIFT key when you see the gray Apple logo and progress indicator.

    OS X El Capitan: start in safe mode

    Once the computer is running in safe mode, see if you can duplicate the issue.  If the problem does not appear, go ahead and try to reboot normally again.  If the problem has disappeared, it may have been caused by a problem of file or directory of cache fixed by booting in safe mode.

    If the question comes up, you'll want to check the login items.  Follow these instructions to remove the connection:

    OS X El Capitan: If you think you have incompatible connection points

    Remove the connection, restart the computer and see if the problem persists.

    Have a great day!

  • What happens to my key if my hard drive is formatted, the key will work after that my hard drive is formatted?

    I want to know that my synchronized computer key will work if I format my drive hard because when the hard drive is formatted, then the key code is deleted, even though I saved my key will it work after formatting hard drive. Let me know.

                  let me also know that what will happen if I lose the key I had saved then how will I access my synchronized computer .
    

    Hello!

    Can you indicate the information where it says that the information is stored in our servers? If that mentioned anywhere we need to clarify.

    The only reference I found is here: How can I set up Sync on my computer? and it is specifically stated that the information is synchronized on devices through our servers. If it is misleading, let me know so that we can reword it.

    Regarding the storage of the key in your pen drive or any other backup system: this is the best solution and it will work correctly after you format your computer. The key does not change when you format your computer, so you will have no problems after all.

  • Do I need an external hard drive if I use iCloud?

    Do I need an external hard drive if I use iCloud?  I had used a Western Digital My Book Essential Edition, 500 GB, for the past 7 years.  It kept blinking and blinks so I unplugged probably too old.

    Now, I'm wondering if I should get another external hard drive or if iCloud does automatic backups.  I'm not too knowledgeable on these things and would appreciate help.

    I use a Mac Pro, OS X Yosemite.

    Thank you!

    Yes, you need an external hard drive to back up your Mac.  iCloud or iCloud library reader are not a backup of your data and documents.  Are the copy job. Get a new external drive with enough storage - Lear three times the size of the internal drive of your Mac and then set up Time Machine.

  • Satellite P200 - need a new hard drive controller

    I think I need a new hard drive for my p200 controller there is no disk in the bios, I replaced the hard drive and still nothing can buy you a hard drive controller or you have to replace the motherboard?

    Hello

    You can not replace the HARD disk controller.
    The HARD disk controller is part of the motherboard and if it works badly then you would to replace the whole motherboard.

    But are you sure you bought a good HDD?
    Where the HARD drive is not visible; in the BIOS or operating system?

  • I am installing a seagate 500 GB internal hard drive, when I go to disk management, the drive is there, but I can not format because you know not initialized. can anyone help please

    I am installing an internal hard drive 500 GB seagate on my computer, when I go to disk management, the drive is there, but I can not format because it is unknown / not initialized. can anyone help please

    Try one of the two utilities below to partition and format the drive.

    Partition Wizard Home Edition:
    http://www.partitionwizard.com/free-partition-manager.html
    Note: There is also a CD bootable or versions of the bootable Flash drive:
    CD: http://www.partitionwizard.com/partition-wizard-bootable-cd.html
    Flash player: http://www.partitionwizard.com/bootable-flash-drive.html
    Among the features and functions: create partition, Delete partition, format partition,.
    A partition resize, move partitions, restore Partition after an accidental deletion, convert partition, Explore, Hide partition partition,
    Change the drive letter, a partition active Set, Explorer (content display) of the partition.
    Note: To achieve any task using the "Operations pending" box at the bottom or top left.

    Alternative to Partition Wizard (a bit easier to use, but Partition Wizard and EASEUS have almost identical user interfaces)
    EASEUS Partition Master Home Edition (free):
    http://www.partition-tool.com/personal.htm
    Partition software ALL-IN-ONE and the most convenient hard disk partition manager Kit
    Includes Partition Manager, Disk & Partition copy Wizard and Partition MBR and GUID partition GPT disk recovery Wizard (table) on Windows 2000, XP, Vista, Windows 7 and Windows Server 2000/2003/2008 (32-bit and 64-bit).
    It allows users to resize/move Partition, drive system extend, copy Disk & Partition, Partition merge, Split Partition, redistribute free space, convert dynamic disk, Partition Recovery and much more.

    J W Stuart: http://www.pagestart.com

  • Trying to remove virus format hard drive - when booting from the Windows XP CD, don't teach me to press a button to proceed with the installation?

    Trying to remove virus, need to format the hard drive to remove all programs to remove the virus.  I ran several security programs which has not found a virus.  Taken at Best Buy, they ran their programs, could not detect viruses, but said there are something certainly on my system.  System is pegged almost 100% all the time, so I can't really use the pc.

    Reinstalling the operating system is usually not necessary to remove the malware, but if you're convinced that this is necessary (it is sometimes), this guide is a good:

    http://michaelstevenstech.com/cleanxpinstall.html

    (this assumes that you have the appropriate Windows XP installation CD)

    Of course, you will need to boot from the CD instead of the hard drive. This page explains that:

    http://michaelstevenstech.com/bios_manufacturer.htm

    You also need to install the hardware drivers. I hope that you have them on CD, too. If this is not the case, the web site of the manufacturer of PC should have them.

    Since a clean install wipes EVERYTHING, you should have all your data copied beforehand.

  • Corrupted hard disk, need help with replacement drive...

    I have currently a HP Pavilion DV6500 is a bit old but my children use it for learning games and watch netflix. They use on a daily basis. Months ago, the hard drive went out on this issue I tried to take it they told me to just buy a new laptop cost way to much to fix.

    The hard drive has a sticker that says "Replace with HP Spare" which makes it means? The laptop was running a Seagate Momentus 5400.3 im looking for a disc compatible hard good which can be integrated in the laptop right now. And a what it cost an arm and a leg.

    Any help would be greatly appreciated. Thank you for your help.

    Hello

    The player at the link below is an example of one that would be perfect for your laptop.

    250 GB hard drive for laptop.

    The procedure to replace the hard drive is detailed from Page 59 of your & Maintenance Guide.

    Once this is done, simply use your recovery DVD to reinstall the operating system on the new drive.

    If you do not have your recovery discs, you can order a replacement set using the link below.

    Order HP recovery disks.

    If you have a problem with this link, order them directly from HP.

    If you live in the United States, contact HP here.

    If you are in another part of the world, begin here.

    Kind regards

    DP - K

  • Problem of storage space satellite L305-S5962 HARD drive when installing XP

    Hello

    Last week, I ordered two TOSHIBA Satellite L305-S5962 for my children and finally happened yesterday.
    I was so glad that I found all drivers XP needed for it on Toshiba USA website, however something weird happened when I went to install XP over there.

    It came with preloaded Vista and while under Vista, I checked the HARD drive space it is said about 250 GB (240 - ish), but during the installation blue screen boot XP it read C 131 GB only partition.
    So, if you round up to about 130 GB, where the other 90 GB's?

    This problem has happened to these two Toshibas, and read the two HDD substantially the same.
    In Vista, it reads close to 250 GB, but when installing XP blue screen (once I turn off the AHCI setting in BIOS) it reads at 131 GB. Is this some kind of driver issue? or to issue OS with AHCI?

    On the Toshiba site there are two HARD drive drivers, are a .exe and the other a .zip file.
    I tried both in the XP installation CD of nLite, but it does not help.
    It still reads GB 131, so now I have no idea what to do, or maybe I have something wrong during the splicing of nLite?

    In any case, if anyone has some insight on this problem, please let me know.

    Thank you!

    -G.P.

    P.S. Here is the link to site from USA, for XP SP2/SP3 drivers, HARD disk drivers.

    http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/modelContent.jsp?CT=DL&OS=&category=&MOID=2350214& rpn = PSLB8U & modelFilter = TOSHIBA + Satellite + L305-S5962 & SelCategorie = 3 & selFamily = 1073768663

    Even once, if someone has seen, thank YOU!

    > I checked disk space HARD it is said about 250 GB (240 - ish), but during the installation blue screen boot XP it read the partition C 131 GB only.

    The HARD disk is partitioned into 3 partitions.
    The first partition contains OS preinstalled; Vista
    The second partition contains the image of Toshiba HDD and the last third partition is hidden. It s a small partition created by Vista and it contains the backup files. These files can be used if something goes wrong with Vista OS or if Vista needs to be repaired.

    So I guess you've seen only the first partition that contains the operating system Vista

  • Pavilion g6-2165sx: * URGENT Please HELP * short hard drive DST has no error RU773W-68R81S-MFPX1G-60W803

    Hello my problem occurred as a result of the creation or modification of partitions to install ubuntu (for reasons of college) however I stupidly didn't check my disk was dynamic or basic and unfortunately it was dynamic, if after failing to install ubuntu windows 10 had an error in INACCESSEBLE_BOOT_DRIVE when I oppened the cmd troubleshooting and checked on diskpart did not exist but with a status unknown after dvd player I made the diagnosis and that he got a short DST has not... Is there a chance to correct the reader because im out of warranty and im in no condition to buy a new hard drive... Thanks in advance

    @Alin742

    Go to this site and create a bootable CD.

    http://hddguru.com/software/2005.10.02-MHDD/

    Boot from the CD.

    If she asks do you want SCSI, click No or just press ENTER. (countdown to 30 seconds)

    The port selection select your HARD drive. (Usually 1, 3 or 6).

    If you do not see your HARD drive, you will need to restart and go into the BIOS and SATA ATA value.

    After choosing your type of HARD drive, ERASE and press to enter. (This will erase all data).

    Leave it to erase the entire disc. (Depending on the size, it may take 2 to 5 hours.)

    Once done erase all disk F4 2 hit shots and will start the test.

    Many people simply replace the HARD drive and all that is wrong is there is simply soft errors. (Errors caused by software not hardware errors.)

    If you need help running the program let me know.

    REO

  • Pavilion Entertainment PC dv6: need a new hard drive for the dv6-1230us

    My question is about the HP Pavilion Entertainment dv6-1230us PC. Recently, it was abandoned, and since then it has been giving me the following message if poster every time it starts.

    Not found boot device

    Please install an operating system on your hard drive.

    Hard Drisk (3F0)

    F2 System Diagnostics

    "For more information, please visit: www.hp.com/go/techcenter/startup"

    I know it's important to run the hard drive test, but when I run the diagnostics of the system for the Test drive, it says:
    "HDD test failed.
    There is no hard drive.

    I was also on the proposed site and even after "reset my BIOS to default", it recommends running the hard drive test, which does not simply because it has not really helped me the "there is no hard drive. There was a YouTube video that I came across thus suggested pulling the hard drive and diconnecting and reconnect to correct the error in this case that the son is detached, but that no longer works.

    SO, I don't know if there is anything more that I can do, I guess that the hard drive is super dead.

    It comes with a Seagate ATA hard drive. I was wondering if I could replace it with a SATA hard drive or should it be an ATA? (Even has the material capacity to support a SATA drive?)

    Also, it is even useful to replace the hard drive? Should I get a new laptop instead? This laptop is used mainly for just browsing online and checking emails.

    Any help is appreciated, thanks.

    Yes, the hard drive is so dead, that he not yet register as a hard drive. The dv6-1000 series certainly uses SATA, not ATA drives so I'm not sure of what you see. You can replace it with any drive SATA 2.5 inch width 9.5 mm thick.

    Watch this video between: 53 and: 59 and see that it's a SATA drive. If yours is different, so you have confused with your model.

    https://www.YouTube.com/watch?v=QQx7PlIXFuE

    Hard disks are a small fraction of the cost of a laptop and if your what it takes to, I would say that to replace the hard drive rather than buy a new one.

    It is an excellent drive at a great price:

    http://www.Newegg.com/product/product.aspx?item=N82E16822236563

    You have recovery discs? You run Windows 7? Post back if you need help more to restore system software.

    If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

  • Internal hard drive inside Dell PowerEdge R710

    Well then clarify first of all. This server is NOT used in a business environment. Its literally being used as a home media server (Yes, exaggerated way I know but I got for free so who is complaining).

    IM currently using a PowerEdge 2950 as my media server, I just took his upgrade, a R710 Gen 2 and I would like to use all 6 bays at the front for hard drives that I can put the plates on instead of 1 for the operating system and then everything else for the media.

    How I would go about installing an internal hard drive, preferably a SSD, inside the R710. I know it has a free SATA port but I can't seem to see the spare power cables or cables molex as there is in the Gen 3 2950 I.

    If it is not possible, it's quite good, but I would like to have installed an internal hard drive.

    I know there is a USB port, but I use Windows Server R2 2012 (probably soon to be Server 2016) but I'm not sure if Windows Server can be installed on the internal USB port.

    If you need to record, or on the label of service I can give you this information.

    Any help would be appreciated.

    Thank you

    Arron

    Thanks for the clarification. It's something that you can try, but it is not supported and there is no guarantee that the SSD will be detected and it works perfectly. Try this P/N GP700 cable

Maybe you are looking for

  • Drawing objects in Firefox and Thunderbird after installing the graphics card MSI R6850 of AMD

    After installing the new graphics card (MSI R6850 CYCLONE 1GD5 PE/OC), pilots the latest on Windows XP 32-bit, I frequently meet with Mozilla Firefox 8.0 and Mozilla Thunderbird 8.0 drawing artifacts. The problem presents itself as a horizontal black

  • How can I reconfigure media buttons?

    Hello On the left side, I have a few buttons for Internet and sound.How is it possible to configure that if I start the Itunes of its start-up and not Windows Media Player? Thanks for your commentsSincerelyVincent

  • help with table in spreadsheet string

    Hello I need assistance to format my 2D in a string table. I have a 2D DBL like this chart: and I want it in a format string like this "0.12 0, 1 0.34, 2 0.11. Line 0 pass 0 0 Col 1 Row line 1 Col 0 line 1 Col 1 line 2, column 0 line 2 Col 1... and s

  • Product key for Vista Home Premium...

    I had my computer fixed recently, due to a virus... But I got home quite some time now.  It has worked out very well, except occasionally, a pop-up appears, telling me: "product key of Windows Vista Edition Family Premium you typed is invalid for act

  • Wireless connection with HP7410 xi

    I have a HP Envy m6 with Windows 8.1.   I rebooted the HP Solution Center and the software of HP7410 a couple of times.  I'll be able to connect wirelessly for a while, then the next day, cannot.  All the drivers look right, the IP addresses of the p