Need help - connection problem with R12.1.1 (Vision) on Windows 2008 R2 (Datacenter)

Similar Questions

• Need help, a problem with IPSec and NAT - T

  We had a successful between a Cisco remote access client and the ASA connection.   The connection is more data transfer, but the Phase I and Phase II complete successfully.   There are several sections between separate networks for the remote user to the ASA, including hotlines of Verizon and Verizon's ISP.

  Troubleshooting Cisco guides strongly suggests, it is a problem of NAT - T, but when I turn on debugging 254 isakmp and debug ipsec 254, I get only a modest messages on NAT - T, which is "Recieved NAT-Traversal version 02 VID.   This message and connections, are when I disabled it on the ASA of NAT - T.

  If I enable NAT - T on the SAA, the remote client cannot establish Phase I or II; I was not able to gather debugs on this scenerio yet.

  The customer has a second laptop, both of them experience the same problem.  We have ensured that the Tunneling, UPD 4500 is activated.

  I suspect that an intermediary device or Verizon, changed something.

  What should be my next troubleshooting (unfortunately, I can't post the configs)?

  Kind regards

  j

  From my very limited experience, both sides must have the NAT - T enabled, otherwise the side who did not need NAT - t won't be able to read the part of the IP header because it is encrypted.

  Good luck!

  Pedro

• problem with making a stand-alone server windows 2008, I do not really understand the versions of the internet protocol

  I do a stand-alone server for windows 2008 and my question, what's the difference between an internet protocol version 6 (TCP/IPv6) and internet protocol version 4 (TCP/IPv4), thank you welcomes Dylan

  Hello

  You can find the Server forums on TechNet support, please create a new post at the following link:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• Connection problems with atheros ar9002wb-1ng

  I have 2 computers laptop toshiba satellite.  I just updated my router to Belkin ac1200 wireless router.  I'm having connection problems with my satellite l750, with atheros ar9002wb-1ng wireless network adapter - keeps disconnecting with a signal strength low however the other satellite I with a realtek rtl8188ce wireless lan has an excellent signal strength and works very well - how to fix this?   I'm not very techno so easy instructions please.  Thank you.

  Hi Jak,

  Welcome to Microsoft communities.

  I understand that the wireless connection is disconnected.

  1. don't you make recent changes that caused the problem?
  2. any message/error code?

  Try the steps in the following methods and check the status of the issue.

  Method 1:

  Using the troubleshooter from network in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 2:

  Configure the computer to clean start State to check software conflicts and check the status.
  http://support.Microsoft.com/kb/929135

  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 of the article mentioned above.

  Method 3:

  Wi - Fi and in Windows network connection issues.
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Please report if you are still having the problem. I'll be happy to provide you with additional options available that you can use to get this problem is solved.

• I have connection problems with Skype video chat (Internet Explorer 8 - Windows XP pro). What I haveto do to fix this?

  I have connection problems with Skype video chat (IE 8 - XP pro.) What should I do to correct this?

  Hello

  go to skype.com and make sure you have the latest version of their software.

  Kind regards.

• connection problem with screen

  I bought a compaq presario cq61-421sa about 18 months ago, so it is now out of warranty, and I have a connection problem with my screen. the entire right is taken up by different colored about vertical lines 1 pixel everywhere and therefore can not see half the screen.

  any idea how much it would cost to get HP support to do a repair on it? as I don't have the confidence to do it myself

  Hello

  Thre are 2 things that are likely

  the video card

  (b) the screen itself

  To check this, simply connect the laptop to an external monitor (from a friend, parent,...) If nothing wrong with the external monitor, which means that the screen of the laptop is faulty, if the video card is faulty. I don't know the cost but I charge $640 plus a party; Sometiomes my recommendation is to buy a new machine.

  Kind regards.

• Need help to find and install the game Chess Titans Windows Vista for XP

  Need help to find and install the game Chess Titans Windows Vista for XP

  Hi SBOYDC130guy,

  We will not be able to install titan of failures on windows XP because it is designed for Windows Vista and Windows 7 and it's built-in game.

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Downloaded and paid of Minecraft and having problems with Java, Anti Virus Scan and Windows Update - error code 800F081F

  Downloaded and paid of Minecraft and having problems with Java, Anti Virus Scan and Windows Update - error code 800F081F

  Would you advice, thank you.

  Hi Hugo,.

  1. what anti-virus software you have installed in the computer?

  2. What is the full error message/code?

  3. the issue occurred after you install Minecraft?

  4. are you able to play Minecraft without any problem?

  5. what happens with Antivirus and Java?

  Windows Update can occur if one or more of the following conditions are met:

  1. the Windows Update database is damaged.

  2. antivirus software is configured to scan the %Windir%\SoftwareDistribution folder.

  3. the service (BITS) Background Intelligent Transfer Service does not receive a content link header.

  4. a required system file is incorrectly registered.

  5. Windows Installer has encountered an error.

  6. the manifesto of component maintenance (EC) is damaged.

  7. the Windows Update service has stopped during the installation.

  8. a version of the file conflict exists with Windows Update agent files.

  Please follow the steps described in the methods to solve the problem:

  Method 1: We will try the steps from the following link and check the result:

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article:http://windows.microsoft.com/en-US/windows7/Back-up-the-registry

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058?WA=wsignin1.0

  Method 2:

  To correct the errors that occur when you use Windows Update, install, and run the system update readiness tool. The tool analyzes inconsistencies on your computer and fixes as its current installation.

  You can view the following link to download the system update readiness tool and check:

  System tool update that corrects problems of Windows Update is available for Windows 8, Windows 7, Windows Vista, Windows Server 2008 R2 and Windows Server 2008

  http://support.Microsoft.com/kb/947821

  Details of the event log to find what caused the Antivirus and Java to fail:

  What are the information contained in the logs of the event (Event Viewer)?

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  Hope that the information provided is useful.

  For any help related to this problem or any question of Windows, you can still display in the Microsoft Community Forum!

• problem with write access to truecrypt readers windows 7. The mounted drive is not writing priveliges. Read-only. Cannot change in the security permissions.

  problem with write access to truecrypt readers windows 7. The mounted drive is not writing priveliges. Read-only. Cannot change in the security permissions.

  Hi amcop4591,

  1. How is - that Mount you the drive on the computer?

  2 Di you use any third-party tool to mount the drive?

  I suggest that you remove the external drive using the disk management and check back later if you can change the permissions on the drive.

  If you change the permissions, make changes to the permissions on the drive and then mount the drive.

  Mount or dismount a drive

  http://Windows.Microsoft.com/en-us/Windows7/mount-or-dismount-a-drive

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error message indicating the problem with the monitor of devices in Windows XP.

  Original title: Device Monitor

  Error message indicating the problem with the monitor of devices in windows xp. How to fix?

  Hello

  1. when exactly you receive this error message?

  2. What is the brand and model of your computer?

  3. What is the exact error message that you receive?

  Please provide us with more information about the issue so that we can provide you with the necessary assistance.

• Problem with the areo and transparency in Windows 7 after installation of Nvidia Geforce go 6200

  Am having problem with the areo and transparency in Windows 7 after installation of Nvidia Geforce go 6200

  * original title - I'm having a problem *.

  You have the latest drivers?
  http://www.nvidia.com/page/support.html

  Aero - Windows 7 - How to troubleshoot problems with Aero

  (1) first of all, click on the Start button and type in Aero. Now, click on find and fix problems with transparency and other Visual effects of link.

  (2) a new Wizard dialog box opens. Make sure that you click Advanced to solve all problems automatically.

  (3) either the problem will be solved or not. If this isn't the case, you will get a list of items that are potential problems.

  (4) If you want to see more details about the problem, you can click View detailed information. This will give you a list of potential problems that have been verified and those that pose problems.

  If it does not---> click Start---> right click computer---> click Properties

  Click the link for 'Windows performance index' and then click 'rerun the assessment"to refresh your WEI score and try again.

  Note: If you have Windows 7 Starter, or if your system does not meet the requirements for Aero you will not be able to use Aero.

• Windows 2008 R2 DataCenter registry problem

  Hi all:

  A few months ago, I needed to make a full upward from my server and after that almost all still works fine besides that some functions including IE.

  The question I had is with 298 ordinal which is not found in the library iertudil.dll dynamics.

  I can confirm that the iertudil.dll file exists under System32 and tried to replace it with the original installation of the DVD where it was damaged but not yet lucky. I know that I have no malware or viruses that I ran full scans and this issue has happened after the back upward.

  So at this point, I'm sure that the problem is related with the registry key bad that was left when I did the back upward by up to 100%. I would like to make a correction of the registry software and I actually found a good which is accredited by Microsoft, but the problem is I managed to install the correction of the registry software, but if I try to run it, it won't work and it appears that the message '298 ordinal. "that cannot be found in the dynamic link library iertudil.dll

  I'm a bit on a dead end here because I can't run the program to try to repair the registry and looks like the only option is to go into the registry and try to fix it manually. Only problem is that I don't know where to find them and what would be the key to get rid of all bad registry entries.

  Given that I'm avoiding at all costs a repair of windows or pure full install as that would make me a lot of time down on my server, I want to ask if there is no genius out there who could point me where to find this iertudil on the register and the values should be there so I can modify it. Of course, I'll do a registry backup before committing any changes. If anyone can help, I'd appreciate that after googling for hours I can't find all the instructions for a manual registry fix. I'm on a Windows 2008 R2 DataCenter X 64 bit system

  Thanks in advance.

  Hello

  Please post your question in Server TechNet Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Need print drivers for an OfficeJet 7610 for R2 in Windows 2008 Server

  I need print drivers for an OfficeJet 7610 for R2 in Windows 2008 Server.  The pilot to feel that you get when download you from hp.com are for XP and Vista Window7.  The error message says I have to update my Windows 2008 Server R2 to XP, Windows7 and Vista to install drivers.  I called HP and have a case number.  All I want is a link to the REAL Windows 2008 Server R2 Enterprise OfficeJet 7610 Print Drviers in x 86 and x 64 bit versions.  Is there someone who can help?

  Hi Print_Madman! : you might have more luck going Buisiness & reierate Forum this question out there

  He is the owner of the House section

  Good luck

  hope this helps you

  spacechild

• Connection problems with O2/UK

  Hi all

  II having connection problems when running my application on the network O2/UK. It is specific to the said operator then please don't direct me to General articles on connection settings (I have a simple library for dealing with this).

  I first tried WAP2, which I think I read was the best option, and it failed with the following text: "java.io.IOException: APN is not specified." Connection parameters used were: «;» ConnectionUID = WAP2 + trans"(extract from the records of service). This indicates to me that the settings in the service record are not OK...

  Then I tried wap1 with the following settings found on the web (pinstack.com):

  Gateway IP: 192.113.200.195
  Port: 9201
  APN: wap.o2.co.uk
  username: o2wap
  password: password

  with this, I have net.rim.device.cldc.io.waphttp.WAPIOException. The parameters can of course be wrong (that's the point of not having them in the camera, as do all other manufacturers, BTW...). Y at - there someone here who has done other app works with o2 UK without resorting to the BIS? Any help is appreciated.

  Thank you

  Laszlo

  1. If you try WAP 2.0 TCP, then instead of '+' it probably should be a space in the ConnectionUID. It should read "ConnectionUID = WAP2 trans. You probably get a sign '+' because you think you need exhaust URL parameters, which is not the specific case for RIM connection settings.

  2. If you try Direct TCP (aka carrier TCP today), then take a look here: http://www.filesaveas.com/gprs.html I got a card SIM O2 (contract) and the "Mobile Web" APN settings worked very well.

• Urgent: need help on problems on the iPhone after updating iOS 10 6s

  Hey there! It's my third post about the problems Ive been face on my devices after 10 updated iOS. Initially, after that I've updated, the music app was not running on my phone-all I could see was an empty screen and the APP crashed and I was redirected to the homepage in a few seconds. Tired to restart the phone, deleting and then adding the app back, nothing worked. Not at all. So I tried to restore my phone, save all content via icloud. Followed all the steps and after the restoration of the aircraft of other problems surfaced, BUT the music app still does not work.

  Now, not only the app does not work, I can no longer sync my iPhone with iTunes. Whenever I try, I get the following errors:

  (1) itunes cannot sync the iPhone connection has been reset

  (2) iTunes sync session could start.

  IF PLEASE NOTE, BEFOR RESTORE IPHONE I COULD ALWAYS SYNCHRONIZE WITH ITUNES EVEN AFTER IOS UPDATE 10 AND TRANSFER THE MUSIC ETC, BUT JUST COULDN'T NOT OPEN MUSIC APP TO PHONE-NOW I CAN'T DO EITHER!

  I have tried pretty much everything, restart both phone & iTunes, reset the network settings on my iphone, reset itunes sync history, by removing the lockdown folder, running iTunes as administrator on my PC, change my USB in corduroy, update iTunes, reinstall iTunes on PC-nothing seems to work AT ALL. And it's extremely frustrating. I can sync music/documents on my iPad after update of the device and the restaurant then (iPad also has major problems) and then play the music on it but just isn't my phone can be synchronized. It is a function important and if I can't synchronize my device is a sitting duck.

  The new update of iOS also gave my massive lag of phone. Screen freezes, apps for time-consuming, HDR photos take longer to be broken. It is just too heavy to wear.

  CCAN anyone help me please with my iTunes sync + music matters app... I really regret updating to the new iOS. Please help me.

  Thank you.

  PS apologies for this long post, I had to write everything I tried.

  If you are on Windows, uninstall iTunes, uninstall Apple Mobile Device Support. Once both are uninstalled, reinstall itunes, see if it syncs with itunes then.