Windows 2008 R2 DataCenter registry problem

Similar Questions

• How to enable the Windows 2008 R2 guest operating systems on Windows 2008 R2 Datacenter edition host

  Sorry, I realize it is there much written and blogged about activation and license but I still cannot grasp exactly what to do, please can you help me.

  I have a host running windows 2008 R2, datacenter edition.  The 2008 datacenter edition license allows any number of windows OS to run on this host (will run for most 2008R3 standard edition) so I guess (I hope correctly) that I don't need to buy more licenses.

  So my question is, when these comments of the virtual machines are created, how can I activate them?  What product key should be used?   I have a product key for data center edition, but it does not work "the product key you entered will not work with this edition of windows server 2008 R2.

  Thank you if you can let me know if there is a way (or ways) for the operating systems Windows Server activated running on datacenter edition.

  Best regards

  Jules

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Windows 2008 R2 DataCenter model

  Hello

  I would like to know, when I create a model of Windows 2008 r2 DataCenter, I need to delete VM tools?

  With the help of Microsoft sysprep is a good idea or better to use VMware Guest customization?

  I have 5.0 vSphere update 1 install again today.

  Thank you

  Yes, VMware tools must be installed on all the comments of the OS in my opinion.

  For W2K8 and above, we use the VMware comments customization process, which uses the integrated to W2K8 R2 sysprep process.  So, when you are finished with you 'gold image', just stop it, no need for Windows sysprep.  Then, create customization specifications, before or during the deployment out of the pattern and use it.

  Good luck!

• Dell powerEdge t420, server windows 2008 R2, RAID5, partitioning problem

  Hello

  [Dell powerEdge t420, windows 2008 R2, RAID5 Server]

  I have attached the picture of disk management.

  There are

  1 extended partition in which it is

  1 NTFS logical volume that completely fill the extended partition.

  But there is a small green free space 0 MB.

  Is this normal?

  Thanks for the info. I have install.

  I reinstalled the operating system

  and in OS partitioning step installation

  There were:

  a 1 Mb extended partition, then the logical partition.

  I deleted all and create 2 primary partition (1 for the Os) and 1 for DATA.

  I solved it.

  But I don't know if

  is the best performing primary or logical partition.

• Need help - connection problem with R12.1.1 (Vision) on Windows 2008 R2 (Datacenter)

  Hello
  
  (1) we made a fresh install of R12.1.1 (Vision) on Windows Server 2008 R2 for demonstration purposes at the senior management and upgrade planning. Running on 11.5.10.2.
  (2) installation went fine. We follow all the necessary prerequisites for installation.
  (3) after the installation, we did run autoconfig for DB as well as the APPlication and started services.
  (4) we are able to see the page of connection, but not able to connect using generic accounts of OPERATIONS/WELCOME or SYSADMIN/SYSADMIN.
  (5) send the document screenshot and a newspaper for your perusal. Please provide your e-mail id. Not able to attach here.
  
  Please help us with diagnosis and solution.
  
  Thank you and best regards,
  Renaud.
  
  Published by: 988810 on February 18, 2013 18:23

  Please change the password for these users by using FNDCPASS and then - check loss of password SYSADMIN. How to know the password of the user SYSADMIN [ID 1066661.1]

  Thank you
  Hussein

• Windows 2008 R2 with audio problems - No Audio output device detected

  We are always on the 4.0 update 3 and will move to 5.1 here in the coming months, but we are testing a new environment of Citrix xenapp on 2008 R2 servers and noticed that it is not a sound card. On our 2003 32-bit servers, there was and we have audio broadcast to their thin clients, etc... The upgrade of vmware with vmware tools 5.1 9 will provide a fix for this or is this a known limit? Everyone fell on this? Thanks in advance.

  There is not its virtual card in ESX, the remote Protocol is handling that, in this case RDP/ICA/HDX.

  Linjo

• Windows 2008 2 - cpu 1 - CPU

  I know that with windows 2003, you will need to go through some obstacles to get a 2 x cpu 1 x cpu.  I wanted to know with Windows 2008, if the same problem exists, or you can easily switch to 2 CPUS to 1 cpu without problem.

  should not be a problem at all.  The operating system recognizes the change and adjust layer HAL accordingly.

• Satellite Pro M70 - Windows XP has stopped working - registry problems

  My M70 lost (I will follow soon!). Windows XP has stopped working, registry problems. I finished by using the Toshiba Recovery disk and reformat the hard disk. Said again there is some registry problems and crashing.

  One had similar problems?

  Phil

  Hi Phil,

  If your laptop is always report registry errors after having re-installed the operating system from the recovery disc, then it is likely that your hard drive has errors. The Windows XP registry is composed of several files (or urticaria), and the installation process will always be located in the same area of the hard drive.

  Kind regards

• Problem with Windows 2008 Enterprise

  Hello!

  I have a problem with Windows 2008 Server. I have a server with the operating system and I shared network folders and more restricted to different users. Random users cannot connect to moments share files and then automatically recovers. Remote access to the server is enabled. Sometimes I can connect to the server sometimes didn't. Below is a photo with a message.

  Hello

  Support for Windows Server is not provided in these forums. On the other hand, it please repost your question in the relevant Microsoft TechNet forum here:

  http://social.technet.microsoft.com/Forums/en-us/category/windowsserver .

  Thank you.      :)

• How to migrate from windows 2003 to windows 2008 with all the work of GPO active directory, DNS, without problem?

  Hello...

  I have a problem with windows 2003 to windows 2008 migration. I have try several round of flyway of google and youtube, but he is still fail.
  in the first,.
  I have HP Proliant server with windows server 2003. So I restore the backup to a different server HP Proliant wih same hardware specification. I've been back up the System State and the drive C with NTBackup. After I restored on HP Proliant, that I want to migrate, the DNS server is timeout request and the client cannot join domain. I was surprised, because the backup and the material is the same, but it can work as well as the original server.
  in the second case,
  I have windows server 2003 in HP Proliant server and it works well. I'm doing a replication on this server to another windows 2003 server in an another HP Proliant and works of good replication (another user can join the domain). After, I have installed windows server 2008 to another PC and make the replication of the duplication of windows 2003. And this success to replicate, but not on the DNS (DNS query time-out).
  I have the despair to try migrating Windows 2003 and 2008 because he is still fail in DNS. Another way to migrate to Windows 2003 and 2008 with DNS, AD and GPO work?

  Hello

  The question you posted would be better suited to the TechNet forum where IT professional will deal with your question.

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

• 64-bit Intel processors and Windows 2008, Datacenter Edition - Download naming confusion. That what I want?

  I have processors intel xeon mp in my server. Here are the processors intel 64-bit. When I go to download Windows 2008, Datacenter Edition (http://www.microsoft.com/downloads/en/details.aspx?FamilyId=E8A5AEC0-DE34-405E-9304-1C378F44077C&displaylang=en) I get 2 options. 1 "amd64fre" in the name, the other has "x86fre" in the name. At the bottom of the page it says I want amd64 for 64-bit and x 86 for 32-bit processing. I'm not sure of is this:

  The amd64 DVD only does support AMD 64 opteron chips, or it will make the xeon mp as well? The "REF" does mean "French", even if later in the name, it is clearly IN (English).

  I have processors intel xeon mp in my server. Here are the processors intel 64-bit. When I go to download Windows 2008, Datacenter Edition (http://www.microsoft.com/downloads/en/details.aspx?FamilyId=E8A5AEC0-DE34-405E-9304-1C378F44077C&displaylang=en) I get 2 options. 1 "amd64fre" in the name, the other has "x86fre" in the name. At the bottom of the page it says I want amd64 for 64-bit and x 86 for 32-bit processing. I'm not sure of is this:

  The amd64 DVD only does support AMD 64 opteron chips, or it will make the xeon mp as well? The "REF" does mean "French", even if later in the name, it is clearly IN (English).

  Hé BSAFH

  Here is the vista forums

  Try the help below links

  http://www.Microsoft.com/windowsserver2008/en/us/2008-DC.aspx

  http://www.Microsoft.com/windowsserver2008/en/us/forums-blogs.aspx

  Walter, the time zone traveller

• Problem starting Windows 2008 R2

  I've restored a backup BackupExec (State of data and system) to a server running Windows 2008 R2 to new hardware. New material contains PERC H710P RAID controller and Windows installation media does not contain a driver for it. So my freshly installed with driver PERC system clears my restore of the System State and the system refuses to boot.

  I was not able to find a way to inject PERC drivers in the Windows 2008 R2 (which is the same as that of Windows 7-64) boot environment. I tried to build a Windows ISO updated the with drivers PERC, hoping his recovery option would be smart enough to add the new driver to boot environment. Not only it doesn't seem to be able to change the boot sequence, there is no still load the PERC driver and I've always had to be loaded from a flash drive.

  Anyone have any ideas on how to add the driver support when starting a system that is already installed?

  Thank you

  HammerCR

  This problem has been resolved yesterday. Here is an overview of the steps:

  1. Download the latest driver off site support.dell.com and extract the files on a USB key.
  2. Insert the USB key into the server.
  3. Start on the support of the Windows operating system and use "Shift + F10" to launch a command line window.
     1. It might be a good idea to use two windows to start diskpart in to get the Volume letters
     2. Diskpart.exe and then run 'list volume' to view the volumes
  4. Run the following command:
     DISM / image: C: \ / Add-Driver /driver:D:\percsas3.inf
     Note: C:\ is assumed to be the Windows system drive Partition D:\ is the USB.
  5. Once the driver has been loaded, leave the Windows installation program and restart the system. The system can boot into recovery utility, but choose to boot in Windows 2008 R2. System will reboot and you will be presented with a login screen.

  I hope this will be useful to someone.

• 2850 problem - Windows 2008 R2 - PE with Driver HD

  Hello

  I am trying to install windows 2008 R2 on a PE 2850, but it does not work.

  The problem is that windows does not recognize the hard drive (when should I choose on what partition I want to install the OS).

  I tried to load the driver PERC 4e/DI RAID v6.46 (from the dell support site), but it says that the driver is not digitally signed.

  The installation works with Windows 2008, the version of the driver is 6.50, so I and it loaded when installing 2008 R2, but this isn't work eather (same message).

  I also tried with lsi.com driver, the driver version is 6.51, it is digitally signed, but it does not work for the 4e/DI (4/Di, 4e/DC,... but not 4e/DI).

  Do you have any idea how to solve this problem? Reference dell do something?

  Thank you

  Firstly, be sure this is the driver you are using:

  When you have created your logical drives, did you also initialize it them?

  You can also try to install via USB key - this is how I do all of my installs more:

  http://www.Haiders.NET/post/installing-Windows-Server-2008-from-a-USB-Flash-pen-drive.aspx

  There was a similar problem for me who ends up being a weird DVD disc problem - it would install each OS with the exception of 2008 R2 - but it was isolated on one single disc well - other readers who have exactly the same brand/model/firmware worked fine.

• Problem of ThinApp IE9 for Windows 2008 R2 Server Citrix

  Hello

  I'm trying to make a package for IE9 I'll be able to run on Server 2008 R2 running Citrix 6.5

  so I made this package by installing a windows 7 ent vm workstation and I capture the IE9

  now on this virtual machine with windows 7, this package work very well and also on my pc running windows 2008 R2 it also work correctly

  but when I try to run on no matter which of my new citrix servers open IE9, and then it shows this error popup:

  "A display problem (page name) caused Internet Explorer Refresh the Web page.

  and then freeze IE9. (this happen for IE9 32-bit and 64-bit, my servers are all 64-bit)

  now, I'm working on it for a week now and I have googled all the net and I found every article I can find on this error

  and I have tried everything with no success

  now, the only difference between my PCs running on windows 2008 R2, and Citrix servers are that my pc is a physical pc running Intel i5

  and all my citrix servers running on Vmware esxi 5.1 platform and I don't put all windows update install on my pc and I have Citrix install all updates from Microsoft.

  So it can be a hardware problem in the context of the article I found say that it may be related to the video card driver, but if this is the case how it works on the virtual machine with windows 7 running on the same server esxi

  and it can also be an update from Microsoft that makes this problem or it may be something that I don't think and that I need your help

  the IE9 which are installed on my citrix server run ok and there I have no problem but the IE9 in the package I build gives me this error

  one more strange thing is that in my package I didn't enter any home page and when I run this package it take home page I put in the local server as my homepage

  I also build a package for IE7 and present a work very well and there it didn't happen for me that the homepage on the server has been set as my package's home page.

  now, I'm trying to build this package as insulated and uninsulated and it made no difference regarding my problem, or to the homepage that originate from the local server.

  so I need some help here, and I need it ASAP

  Thank you

  Your

  Tamir

  Hello

  I found the cause of my problem, after all the test I did has been updated to Microsoft KB 2670838

  who get the users name in the net as the WRONG UPDATE

  See here: http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_update/kb-2670838-the-evil-update/08bfdb2b-6896-4c34-89c2-16896a25dc3d

  After I remove this update that are not at all necessary and is also define who you just have it as a prerequisite for upgrading IE to version 10

  IE9 begin to work my package.

  So if someone of you will have a problem with IE9 and time does take to load pages remove this update.

  Tamir

• License with Windows 2008, Datacenter Edition

  We have two servers, each with a single processor, 6 and 6-8 windows server VM.

  Is it OK to take two license Windows 2008 Datacenter?
  I heard that a minimum number of CPU host must be two. Is this good?

  Thank you

  Yes, Windows Server 2008 R2 Datacenter Edition requires a minimum of two processors.  See below for pricing and licensing Guide:

  Windows Server 2008 R2 Datacenter is sold in a processor / Windows Server 2008 R2 Datacenter Edition Cal can only be run on servers with a minimum of two processors and requires a minimum purchase of two processors.

  http://www.Microsoft.com/en-us/server-cloud/Windows-Server/2008-R2-buy.aspx

  Matt

  http://www.thelowercasew.com