Need help fatal error 10 Workstation: (vmx)

Similar Questions

• Fatal error VMware Workstation: (vmx) Exception 0xc0000005 (access violation)

  I have a laptop that contains the image of a vmware Workstation for Windows 6 user). The machine died and was not recoverable, so I managed to recover the

  image with a linux live cd and install it on another identical laptop.

  The image was suspended at the time of the accident.

  Now when I try to take it back, I get the error message - fatal error VMware Workstation: (vmx) Exception 0xc0000005 (access violation)

  Image settings are grayed out so I can't edit the material (I have read one or two other positions where material caused this message).

  I have attached the log files and dump. If someone could shed some light on this subject, it would be great.

  Hello

  find a *.vmss file in the directory and delete it - then try again

  _________________________

  VMX-settings- WS FAQ -[MOAcd | http://sanbarrow.com/moa241.html]- VMDK-manual

• Help with Workstation error: fatal error VMware Workstation: (vmx) NOT_IMPLEMENTED

  Guys,

  We run RHEL 6.2 here with VMware workstation 8.0.4.  After one of my users have made a 'yum' update, he received the attached error.

  To test, I installed 6.2 RHEL on a new clean disk, ran updates, tried to start a known-working virtual machine and also received this same error.  Did you guys see this?

  TIA

  can I view my here too dump because I get the same error as well?

  The vmware-ui-André-1388 log file is after a repair installed

  Solve the problem: this is Bitdefender 2013. I have uninstall it

• Fatal error VMWare Workstation: (vmx)

  Hello

  I created a VM to Oracle Red Hat Linux Enterprise (RHEL 5) and got this error message. This virtual machine is used as a database (Oracle, RedHat) server and connected to another virtual computer that is used as a device.

  

  I'm using VMWare Workstation version 9.02 and installed in Windows 7 64 bit. In this virtual machine, I created a snapshot. The last State of the virtual machine is interrupted and all I take it back, this error is displayed. I can't change the settings and go back also to any cliché that created before.

  I tried to restart the VMWare services and also used an earlier version of VMWare Workstation version 9.01, but he always does'nt work.

  I have attached the log file. No idea how I can fix this problem?

  Thanks for any help

  You must take the State suspended - something serious has changed since suspend you the VM.
  Looking at the newspaper, I guess that you do not have the same mouse than the one that you used when the virtual machine is suspended.

  Delete these files:

  G:\RHEL 5 2.6 18-8 x86_64\Oracle RHEL 5 2.6. 18-8 x86_64 - Snapshot14.vmsn

  G:\RHEL 5 2.6 18-8-x86_64\564d16bd-1ae0-7f67-3423 - 5ff35c59b4e7.vmem

  Remove these lines from the vmx:

  checkpoint.vmState.readOnly = 'TRUE '.

  checkpoint.vmState = 'Oracle RHEL 5 2.6 18 - 8 x86_64 - Snapshot14.vmsn.

  Then try to start the virtual machine - this time, it should not crash.
  It can still display a warning on a disc that could have a repair, but this could be a bluff, and we can deal with that later.

• Fatal error VMWare Fusion: (vmx)

  I can't properly boot my Windows XP virtual machine.  I get the following error message even after you remove all of the .lck files before commissioning.

  Fatal error VMware Fusion: (vmx)

  ASSERT bora/devices/net/vmxnetHosted.c:553

  A log file is located in ' / Volumes/Photo ID 250 GB/Fusion/Virtual Machines / Windows XP Home Edition.vmwarevm/vmware.log.  A core file is available in ' / cores/core.281.  Please request support and include the contents of the log file and the base file.

  To collect the data to submit to the VMware support, choose "Collect Support information" in the Help menu.

  You can also run "/ Library/Application Support/VMware Fusion/vm - support.tool" directly.

  We will respond on the basis of your entitlement to support.

  I have a snapshot, but recently, I did a lot of work that I'd lose by returning to an AutoReport.  Any suggestions would be greatly appreciated.

  Mark

  Here's the main problem you get.

  ASSERT bora/devices/net/vmxnetHosted.c:553

  Additional information can be found here http://communities.vmware.com/thread/165070

  It seems to be related to the beta version, which I also noticed you were running 2.0.2 beta.

  You might want to take a look at this thread and options here or as we now 2.0.5 you can also consider uninstalling 2.0.2 beta and try to install 2.0.5.

• Fatal error VMware Fusion: (vmx) - something to do with "vmssPath."

  Fusion works very well, but I started getting the following error message when suspending or power off a particularly among my virtual machines (XP). There are no files in the directory of the virtual machine.

  Fatal error VMware Fusion: (vmx)

  Could not update the configuration file with vmssPath: cannot lock the file

  A log file is located in ' / Users/dslice/VMware_Fusion_Virtual_Machines/FSU-WinXPpro/FSU-XPpro.vmwarevm/vmware.log '.  Please request support and include the contents of the log file.

  To collect the data to submit to the VMware support, choose "Collect Support information" in the Help menu.

  You can also run "/ Library/Application Support/VMware Fusion/vm - support.tool" directly.

  We will respond on the basis of your entitlement to support.

  My support of 30 days has long expired. Search the KB and all VMware for a produces no result.

  Any ideas, what is happening?

  In the future to enter the virtual machine 'repertoire' made a right click or ctrl - click it and select Show the contents of the package.  Merger creates virtual machines to act as a beam of Mac, but they are really a directory under the Finder smoke and mirrors.

• Fatal error VMware Player: (vmx)

  Hi, I have a little problem and I would appreciate any help on this as I could not find any solutions online, I install VMware Player 2.5.1 and I open an image of backtrack 3, I used the program without any problem, then I quit and close the pc the next day when I try to restart the VMware Player, I got this error :

  -

  ---

  Fatal error VMware Player: (vmx)

  NOT_IMPLEMENTED d:/build/ob/bora-118166/bora/vmx/main/pollVMX.c:3651

  A log file is available in "C:\Users\vipsvvvv\Desktop\BACKTRACK3_VMW\BACKTRACK3\vmware.log".  A core file is available in "C:\Users\vipsvvvv\Desktop\BACKTRACK3_VMW\BACKTRACK3\vmware-vmx-2860.dmp".  Please request support and include the contents of the log file and the base file.

  To collect the data to submit to the VMware support, run 'vm-support.

  We will respond on the basis of your entitlement to support.

  -

  ---

  Then I delete the program and try to download an earlier version of VMware Player 2.5 because I thought that it will solve the problem, installation went well and then I open again the image of backtrack 3 and used without any problems, but after restarting my windows and wanted to use the player once again, I got the same error so I tried for the 3rd time to uninstall and install again and the same thing happened again after the installation I was able to use the program, but as soon I reboot my pc and I start the player I get the same error.

  Thank you in advance!

  George

  I would like to know if you get the same behavior with disabled UAC?

  Also - try after having run Backtrack - or better say "try" export this key

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\USB

  zip and send it by e-mail - see my site at

  I want to try to clean the traces of the VMware USB device pointing to your usb-WLAN - so persuade VMware suggests that he use this device for the first time.

  ___________________________________

  Description of the vmx settings: http://sanbarrow.com/vmx.html

  VMware-liveCD: http://sanbarrow.com/moa.html

• I need help fixing error 340... only, I get this message when I try to send an email... there at - there a way to fix this error free?

  I need help fixing error 340... only, I get this message when I try to send an email... is possible to fix this for free?

  You must ask Yahoo.
   
  Yahoo support
  http://help.Yahoo.com/l/us/Yahoo/helpcentral/ 

• Need help with error code 0 x 80070424 and 0x6D9

  I need help please!  Spent an entire day trying to figure this even ONCE!  When I try to change my windows firewall settings I get error code 0 x 80070424.  I worked at it so long, I forgot when I get the error 0x6D9 code.  But here is my BIGGEST problem, my computer won't let me do DOWNLOADS at all.  I even checked to make sure that the downloads are enabled in my internet settings.

  Any help would be GREATLY appreciated!

  Hi LindaL5299,

  I, too, got the dreaded error codes and spent much too much time looking for and try to apply the patches on the right!  I hope that I am sharing will help you!

  Have you seen this particular thread? (if you have, my apologies.)

  MS Answers: "I keep on getting error 0x6d9 and 0 x 80070424 code."

  If this isn't the case, you can check it out.

  Watch more precisely for the reply by VIJAY B.

  As a Microsoft Engineer, Vijay must know a few things about these formidable error codes!

  I have summarized his answer for you here.

  METHOD 1:

  If you have installed, UNINSTALL McAfee Firewall;

  AND

  T urn WINDOWS firewall "'WE ' "

  To ensure that Firewall service Windows is activated:

  1.   Click on:                         Start
  2 (in the search box) type: service

  3.   Select:                             services
  4 right-click right on: Windows Firewall service

  5.   Click:                              Stop

  6 right-click AGAIN on: Windows Firewall service

  7.   Click:                              START

  METHOD 2:

  Online virus scanner by using the Microsoft Safety Scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  METHOD 3:

  Try to install the latest updates from Windows Updates
  http://Windows.Microsoft.com/en-us/Windows7/install-Windows-updates

  
  

  METHOD 4:

  Run it Microsoft FixIt! tool (in the following article to see if that helps)

  Diagnose and automatically fix problems of Windows Firewall service

  http://support.Microsoft.com/mats/windows_firewall_diagnostic/

  *************************************************************************************************************

  Keep this site in your 'Favorites', too!

  WINDOWS SEVEN FORUMS    An informative, resourceful AND Microsoft-recommended WIN7 users including Q & A community can save you hours on a Google search! I BOOKMARKED the site (and you could want, too!)

  *************************************************************************************************************

  Hope ONE of these methods is right for you, Linda!  I DO "feel your pain!

  As a company of independent workers, online "etailer", my time AND my livelihood depends totally my PC!  I spent many an hour (s) search on the error codes and try to find fixes.  So, I hope that what I have learned and have just shared can lend to fix your problem (s), also!

  FINGERS CROSSED!

  WendeeMcCee

  "The he Miss Fix - It [If I can!] ". "

  Empathetic to the woes to find fixes for those darn "error codes".

  I hope I can help IF I can, but

  I not an 'IT' pro!

• SOS! Need help? Error [43]

  Good afternoon! Really need help! When the creative cloud loading and loading are interrupted writing "error 43! I already cleaned, I deleted all the files that are associated with Adobe! Thank you, Alexander

  [Title edited for clarity... MOD]

  Error 43 https://forums.adobe.com/thread/2070909

• Fatal error VMware Workstation: (svga) Exception 0xc0000005 (access violation) - VMware keeps crashing and our controls engineer was not able to understand, can someone help to solve?

  
  So I'm a summer at a paper factory and my boss, the engineer of controls has not been able to understand why VMware Workstation on a certain laptop hangs. I tried to create the log file I see posted the number of threads, but what I have is a compressed file which doesn't seem to have the info I've seen... or at least not in the same format. So I'm a complete newbie to VMware, and I searched the knowledge base and could not find any direct matches, at - it ready to help a newb? Really appreciate it and it would really help me as far as my training goes. TQ ahead!

  Just in case where I did maybe right I have attached two support files that I created.

  https://www.thebuddyforum.com/demonbuddy-Forum/65752-video-drivers-constantly-crashing-VMware-9.html

  I noticed that many people have the same problem with my computer when their computer/laptop has an AMD/ATI video card. Here's all I did and I got now work stations facing up and running for a week without any apparent problem

  1 back up your Virtual Machines a safe place and uninstall the workstation

  2 uninstall the AMD/ATI drivers

  3 reinstall the drivers

  4 reinstall the workstation

  5 follow the instructions below exactly to make a registry change

  a. Open regedit.exe and backup the registry, if you don't know how just google it is incredibly easy to make and the instructions are abundant so I don't post them here.

  b. open Notepad and enter the following text, make sure it is correct that the registry change can be risky, but if you enter the text exactly as it is below, you shouldn't have any problems because I have none. I take no responsibility if you have errors after this regedit so do at your own risk. Be sure and enter all the notebook INSTRUCTIONS below. DO NOT WRITE THE INSTRUCTIONS IN NOTEPAD IN YOUR NOTEPAD FILE. Everything below.

  NOTEBOOK INSTRUCTIONS

  Windows Registry Editor Version 5.00

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\GraphicsDrivers\DCI]

  "Timeout" = dword:00000014

  TdrDdiDelay "= dword:00000014".

  "TdrDelay" = dword:00000014

  "TdrLevel" = dword:000000

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\GraphicsDrivers]

  TdrDdiDelay "= dword:00000014".

  TdrDelay "= dword:00000014".

  TdrLevel "= dword:000000".

  END NOTEBOOK INSTRUCTIONS

  c. then navigate to the file and click on Save AS, when you arrive at the location you want to save the file, click the type box and change text to all documents, and then name the file regardless of your choice and add the .reg at the end. Once you have saved the file to its location and double click it to open it, windows will ask if you want to merge with the registry click Yes, windows will be also alert you on editing the registry and if you don't know that you want to try it go ahead and do it. So far, it has worked great for me.

  For more information about editing the registry, I used click here

• Workstation 7.1.1 crashes with a message"fatal error VMware Workstation «»

  Hardware info: Athlon Dual Core 4850e Processor, 4 GB of ram, Audigy 2Zs

  PCI, radeon HD3650 and many else if irrelevant...

  Linux hosts: Mandriva PowerPack 2010.1 x86_64.

  Until a few days ago, everything work lika a charm (what VM - linux or Windows - I used). After an upgrade alsa library (lib64alsa2 - 1.0.23 - 2.0.1), I can't use any computer virtual: whenever vmware wks hangs with error message box saying:

  < div > VMware Workstation unrecoverable
  error: unexpected signal (vcpu-0): 6. a log file is available in
  "/ home/giovanni/vmware/Mandriva Linux 64-bit 2010.0/vmware.log. Please
  ask for support and include the contents of the log file. To collect the
  Select the data to be submitted to VMware support, help & gt; Subject and click on
  "Collect data support. You can also run the script 'vm-support' the
  Record computer directly. We will respond on the basis of your
  right support. < / div >

  And I have to kill both inadmissible msgbox the zombie process vmx to try to run other virtual machines.
  

  
  

  
  

  
  

  Indeed, the newspaper attached you will find the offender: this is an error returned by a library alsa.
  

  ...
  11:36:30.472 August 27: vcpu-0 | PIIX4: PM Resuming suspended type 0 x 0.
  11:36:30.477 27 August: vcpu-0 | < span style = "make weight:" BOLD "" > ALSA lib pcm.c:870: (snd_pcm_sw_params) params - & gt; avail_min is 0: </span > 11:36:30.478 27 August: vcpu-0 | < span style = "police-weight:" BOLD "" > Caught signal 6 - tid 16052 </span > 27 August 11:36:30.478: vcpu-0 | SIGNAL: eip 0x7fae1a7ed925 esp 0x7fae190b9598 ebp 0x7fae1a8efcad
  11:36:30.478 August 27: vcpu-0 | SIGNAL: eax 0 x 0 ebx ecx edx 0xffffffffffffffff 0x7fff005c7eaf 0 x 6 esi 0x3eb4 edi 0x3ea9
  Aug
  27 11:36:30.478: vcpu-0 |         R8 r9 0x7fae190ba710
  0x65737341203a736d r10 0 x 8 r11 r12 0 x 3206 0x7fadaf6ee1b9 r13
  0x7fadaf6f73a0 r14 r15 0x7fae1a8efcad 0 x 937
  11:36:30.478 August 27: vcpu-0 | SIGNAL: battery 7FAE190B9598: 0x1a7eef40 0x00007fae 0xaf6ee1b9 0x00007fad
  11:36:30.478 August 27: vcpu-0 | SIGNAL: battery 7FAE190B95A8: 0x1a8f1354 0x00007fae 0x190b95d0 0x00007fae
  11:36:30.478 August 27: vcpu-0 | SIGNAL: battery 7FAE190B95B8: 0 x 00000937 0 x 00000000 0x190b96c0 0x00007fae
  11:36:30.478 August 27: vcpu-0 | SIGNAL: battery 7FAE190B95C8: 0x1a81e086 0x00007fae 00000018 0 x 0 x 00000030
  11:36:30.478 August 27: vcpu-0 | SIGNAL: battery 7FAE190B95D8: 0x190b96d0 0x00007fae 0x190b95f0 0x00007fae
  11:36:30.478 August 27: vcpu-0 | SIGNAL: battery 7FAE190B95E8: 0x1a8084e8 0x00007fae 00000030 0 x 0 x 00000030
  11:36:30.478 August 27: vcpu-0 | SIGNAL: battery 7FAE190B95F8: 0x190b96e8 0x00007fae 0xa00159a0 0x00007fad
  11:36:30.478 August 27: vcpu-0 | SIGNAL: battery 7FAE190B9608: 0 x 00000075 0x00000000 0 x 00000075 0x00000000
  11:36:30.478 August 27: vcpu-0 | Backtrace:
  ...

  I found also some workaround solutions:

  (1) Elimination of the soundcard virtual machine configuration: the virtual machine starts OK, but no sound;

  (2) set the option "use the card his physique" in the "Edit parameters of the virtual machine - equipment - sound card" window to ' OSS: / dev/dsp ': the virtual machine starts OK, with sound.

  There is a way to have two sounds without OSS and Wks 7.1.1 emulation work?

  Hello

  I'm in charge of the ALSA library in Mandriva.

  I've updated the ALSA-lib in 2010,1 repository main/test last week. You seem to have installed this version of libalsa test and found a problem.

  Look no further, upstream validations that I took in the library contained a typo. I now took the patch followed upstream.

  I have now updated the libalsa available in main/testing 2010.1, so please update and let me know if that solves the problem.

  FWIW, if you notice a problem with the packages in the main/testing repository, you should probably first of all contact Mandriva via the bugtracker is a project upstream. The test repository is generally fine, but obviously problems pass through (in this case, I didn't test certain aspects that determine this problem for example).

  In addition, if you do want to use the main/test, it is usually best to wait the official updates are published once it has been tested by others.

  All the best, (and I hope the update fixes this problem).

  Col

• Need help for error 1719 Windows Installer Service could not be accessed. Your personal contact to check who is properly registered and checked?

  I bought a new Netgear Dual Band Wireless USB adapter N - 900 and I can't get the thing to install because the error 1719 Windows Installer Service could not be accessed.  Contact your personal assistance to check that it is properly registered and activated.  Can someone out there help me understand what I need to do?  I am completely lost and have been for three days.  Please help me!

  Hello

  1. are you able to install other programs?

  2 have you made any changes to the computer before the show?

  Method 1: Run the fix - it in the following article: fix problems with programs that cannot be installed or uninstalled:

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall/

  Method 2: Start the Windows Installer service

  See the following steps:

  a. click Start, type Services.msc and press {ENTER}
  b. double-click Windows Installer
  c. set the startup type of Windows Installer to automatic
  d. Click Start to start the service. Note the error message, if any.
  e. click OK.

  Method 3: Unsubscribe and re - register the Windows Setup program.

  See the following steps:

  a. Click Start, click Run, type MSIEXEC /Unregister. and then click OK.

  Note: Even if you do it right, it may seem that nothing is happening.

  b. Click Start, click Run, type MSIEXEC/REGSERVER and then click OK.

  Note: After you run this command, the operation is complete.

  c. try your application based on Windows Installer again.

  Method 4: SFC scanner.

  Analysis (sfc) System File Checker will replace the missing or corrupted system files on your computer.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7:

  http://support.Microsoft.com/kb/929833

• Need help! Error (0xc0000034)

  Hello

  Today, I decided to upgrade my windows 8 to 8.1. When you have completed the update I had a massage that says update failed, and then I got a blue screen that says that some files were apparently missing or damaged. After some research, I discovered that I need to create a USB recovery. Now my question is that, after I have achieve recovery USB and hang it on my computer, the process of fixing the 'error' will affect the files that I have on the computer?

  (And also does it matter what version of windows 8 the recovery disk USB she?)

  Hello

  You can view the rest fix and see if it helps you:

  http://www.kapilarya.com/fix-the-boot-configuration-data-file-is-missing-some-required-information

  Hope this helps, good luck :)

• Need help with Error #1009

  Hello, I am working on a Flash game where you navigate in different rooms. Each room is located in a frame on the main timeline. I get an error message #1009 when I navigate to certain parts, but each image almost the same code, so I don't know why some executives encounter this problem while others are very well. When the error message that I am always directed to the 'room' I clicked on, but all the buttons in this room disappear and you are then stuck there and having to restart the project. I looked through other forums where people had this error message similar but I could not find a solution that could help me, so I apologize for the display of such a common problem! Here is a screenshot of the error message I get, which says:

  TypeError: Error #1009: cannot access a property or method of a null object reference.

  at project1_fla::MainTimeline/frame4() [project1_fla. MainTimeline::frame4:43]

  at flash.display::MovieClip/gotoAndStop()

  at project1_fla::MainTimeline/enterElevator3() [project1_fla. MainTimeline::frame12:25]

  

  Here are links to the screenshots of the debugging session where it points to the lines of code that contains the error and also screenshots of my code in these pictures:

  Frame error 4 part 1

  Frame error 4 part 2

  Frame error 12 part 1

  Frame error 12 part 2

  Code for chassis 4 part 1

  Code for chassis 4 part 2

  Code 4 room 3

  Code for chassis 4 part 4

  Code for frame 12 part 1

  Code for frame 12 part 2

  Frame 4 is labeled as 'elevator' and armature 12 is "medEntrance". I know that the problem is to jump from an image to the image, but I honestly have no idea what would be the error. I double checked all my code and it must be correct, and what makes it even more confusing, is that some rooms work perfectly while others have this problem and they all use the exact code, but with different names of MC! :/ Something I noticed is that the rooms which are most often linked to (for example that the lift can bind to three different "floors" or frames) are those who encounter this problem. But I chose this pair in particular because it contains the least amount of code I do not understand why have several frames, a link to a picture in particular would be a problem, but it's my first time using Flash and AS3 so I don't know any with its limits.

  Sorry for the overload of code and messy information! I thought it's better to provide too much information than too little and thanks for your help, it is much appreciated!

  rather than distributing your rooms in different key frames,

  Move them to separate the layers

  and use only the first image of each layer

  then do what amy suggested and is wirtie a document class that will have all your key code in

  or put all your code on the first frame of the first layer (separate layers where you have your rooms on)

  So, it becomes available for all your parts.

  To hide rooms you don't currently need put all the parts inside a table:

  var rooms: Array = [room1 room2... room100];

  then write a function

  function showRoom(_index:int):void {}

  for (var i: int = 0; i<>

  {if(i==_index)}

  rooms [i] .visible = true;

  }

  else {}

  rooms [i] .visible = false;

  }

  }

  }

  for example, when you move to the next room call sth. as

  showRoom (4);

  This will hide all parts in addition to the 5th