Similar Questions

• Fatal error VMware Workstation: (vmx) Exception 0xc0000005 (access violation)

  I have a laptop that contains the image of a vmware Workstation for Windows 6 user). The machine died and was not recoverable, so I managed to recover the

  image with a linux live cd and install it on another identical laptop.

  The image was suspended at the time of the accident.

  Now when I try to take it back, I get the error message - fatal error VMware Workstation: (vmx) Exception 0xc0000005 (access violation)

  Image settings are grayed out so I can't edit the material (I have read one or two other positions where material caused this message).

  I have attached the log files and dump. If someone could shed some light on this subject, it would be great.

  Hello

  find a *.vmss file in the directory and delete it - then try again

  _________________________

  VMX-settings- WS FAQ -[MOAcd | http://sanbarrow.com/moa241.html]- VMDK-manual

• Help with Workstation error: fatal error VMware Workstation: (vmx) NOT_IMPLEMENTED

  Guys,

  We run RHEL 6.2 here with VMware workstation 8.0.4.  After one of my users have made a 'yum' update, he received the attached error.

  To test, I installed 6.2 RHEL on a new clean disk, ran updates, tried to start a known-working virtual machine and also received this same error.  Did you guys see this?

  TIA

  can I view my here too dump because I get the same error as well?

  The vmware-ui-André-1388 log file is after a repair installed

  Solve the problem: this is Bitdefender 2013. I have uninstall it

• Fatal error VMWare Fusion: (vmx)

  I can't properly boot my Windows XP virtual machine.  I get the following error message even after you remove all of the .lck files before commissioning.

  Fatal error VMware Fusion: (vmx)

  ASSERT bora/devices/net/vmxnetHosted.c:553

  A log file is located in ' / Volumes/Photo ID 250 GB/Fusion/Virtual Machines / Windows XP Home Edition.vmwarevm/vmware.log.  A core file is available in ' / cores/core.281.  Please request support and include the contents of the log file and the base file.

  To collect the data to submit to the VMware support, choose "Collect Support information" in the Help menu.

  You can also run "/ Library/Application Support/VMware Fusion/vm - support.tool" directly.

  We will respond on the basis of your entitlement to support.

  I have a snapshot, but recently, I did a lot of work that I'd lose by returning to an AutoReport.  Any suggestions would be greatly appreciated.

  Mark

  Here's the main problem you get.

  ASSERT bora/devices/net/vmxnetHosted.c:553

  Additional information can be found here http://communities.vmware.com/thread/165070

  It seems to be related to the beta version, which I also noticed you were running 2.0.2 beta.

  You might want to take a look at this thread and options here or as we now 2.0.5 you can also consider uninstalling 2.0.2 beta and try to install 2.0.5.

• Fatal error VMware Fusion: (vmx) - something to do with "vmssPath."

  Fusion works very well, but I started getting the following error message when suspending or power off a particularly among my virtual machines (XP). There are no files in the directory of the virtual machine.

  Fatal error VMware Fusion: (vmx)

  Could not update the configuration file with vmssPath: cannot lock the file

  A log file is located in ' / Users/dslice/VMware_Fusion_Virtual_Machines/FSU-WinXPpro/FSU-XPpro.vmwarevm/vmware.log '.  Please request support and include the contents of the log file.

  To collect the data to submit to the VMware support, choose "Collect Support information" in the Help menu.

  You can also run "/ Library/Application Support/VMware Fusion/vm - support.tool" directly.

  We will respond on the basis of your entitlement to support.

  My support of 30 days has long expired. Search the KB and all VMware for a produces no result.

  Any ideas, what is happening?

  In the future to enter the virtual machine 'repertoire' made a right click or ctrl - click it and select Show the contents of the package.  Merger creates virtual machines to act as a beam of Mac, but they are really a directory under the Finder smoke and mirrors.

• Fatal error VMware Player: (vmx)

  Hi, I have a little problem and I would appreciate any help on this as I could not find any solutions online, I install VMware Player 2.5.1 and I open an image of backtrack 3, I used the program without any problem, then I quit and close the pc the next day when I try to restart the VMware Player, I got this error :

  -

  ---

  Fatal error VMware Player: (vmx)

  NOT_IMPLEMENTED d:/build/ob/bora-118166/bora/vmx/main/pollVMX.c:3651

  A log file is available in "C:\Users\vipsvvvv\Desktop\BACKTRACK3_VMW\BACKTRACK3\vmware.log".  A core file is available in "C:\Users\vipsvvvv\Desktop\BACKTRACK3_VMW\BACKTRACK3\vmware-vmx-2860.dmp".  Please request support and include the contents of the log file and the base file.

  To collect the data to submit to the VMware support, run 'vm-support.

  We will respond on the basis of your entitlement to support.

  -

  ---

  Then I delete the program and try to download an earlier version of VMware Player 2.5 because I thought that it will solve the problem, installation went well and then I open again the image of backtrack 3 and used without any problems, but after restarting my windows and wanted to use the player once again, I got the same error so I tried for the 3rd time to uninstall and install again and the same thing happened again after the installation I was able to use the program, but as soon I reboot my pc and I start the player I get the same error.

  Thank you in advance!

  George

  I would like to know if you get the same behavior with disabled UAC?

  Also - try after having run Backtrack - or better say "try" export this key

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\USB

  zip and send it by e-mail - see my site at

  I want to try to clean the traces of the VMware USB device pointing to your usb-WLAN - so persuade VMware suggests that he use this device for the first time.

  ___________________________________

  Description of the vmx settings: http://sanbarrow.com/vmx.html

  VMware-liveCD: http://sanbarrow.com/moa.html

• Workstation 7.1.1 crashes with a message"fatal error VMware Workstation «»

  Hardware info: Athlon Dual Core 4850e Processor, 4 GB of ram, Audigy 2Zs

  PCI, radeon HD3650 and many else if irrelevant...

  Linux hosts: Mandriva PowerPack 2010.1 x86_64.

  Until a few days ago, everything work lika a charm (what VM - linux or Windows - I used). After an upgrade alsa library (lib64alsa2 - 1.0.23 - 2.0.1), I can't use any computer virtual: whenever vmware wks hangs with error message box saying:

  < div > VMware Workstation unrecoverable
  error: unexpected signal (vcpu-0): 6. a log file is available in
  "/ home/giovanni/vmware/Mandriva Linux 64-bit 2010.0/vmware.log. Please
  ask for support and include the contents of the log file. To collect the
  Select the data to be submitted to VMware support, help & gt; Subject and click on
  "Collect data support. You can also run the script 'vm-support' the
  Record computer directly. We will respond on the basis of your
  right support. < / div >

  And I have to kill both inadmissible msgbox the zombie process vmx to try to run other virtual machines.
  

  
  

  
  

  
  

  Indeed, the newspaper attached you will find the offender: this is an error returned by a library alsa.
  

  ...
  11:36:30.472 August 27: vcpu-0 | PIIX4: PM Resuming suspended type 0 x 0.
  11:36:30.477 27 August: vcpu-0 | < span style = "make weight:" BOLD "" > ALSA lib pcm.c:870: (snd_pcm_sw_params) params - & gt; avail_min is 0: </span > 11:36:30.478 27 August: vcpu-0 | < span style = "police-weight:" BOLD "" > Caught signal 6 - tid 16052 </span > 27 August 11:36:30.478: vcpu-0 | SIGNAL: eip 0x7fae1a7ed925 esp 0x7fae190b9598 ebp 0x7fae1a8efcad
  11:36:30.478 August 27: vcpu-0 | SIGNAL: eax 0 x 0 ebx ecx edx 0xffffffffffffffff 0x7fff005c7eaf 0 x 6 esi 0x3eb4 edi 0x3ea9
  Aug
  27 11:36:30.478: vcpu-0 |         R8 r9 0x7fae190ba710
  0x65737341203a736d r10 0 x 8 r11 r12 0 x 3206 0x7fadaf6ee1b9 r13
  0x7fadaf6f73a0 r14 r15 0x7fae1a8efcad 0 x 937
  11:36:30.478 August 27: vcpu-0 | SIGNAL: battery 7FAE190B9598: 0x1a7eef40 0x00007fae 0xaf6ee1b9 0x00007fad
  11:36:30.478 August 27: vcpu-0 | SIGNAL: battery 7FAE190B95A8: 0x1a8f1354 0x00007fae 0x190b95d0 0x00007fae
  11:36:30.478 August 27: vcpu-0 | SIGNAL: battery 7FAE190B95B8: 0 x 00000937 0 x 00000000 0x190b96c0 0x00007fae
  11:36:30.478 August 27: vcpu-0 | SIGNAL: battery 7FAE190B95C8: 0x1a81e086 0x00007fae 00000018 0 x 0 x 00000030
  11:36:30.478 August 27: vcpu-0 | SIGNAL: battery 7FAE190B95D8: 0x190b96d0 0x00007fae 0x190b95f0 0x00007fae
  11:36:30.478 August 27: vcpu-0 | SIGNAL: battery 7FAE190B95E8: 0x1a8084e8 0x00007fae 00000030 0 x 0 x 00000030
  11:36:30.478 August 27: vcpu-0 | SIGNAL: battery 7FAE190B95F8: 0x190b96e8 0x00007fae 0xa00159a0 0x00007fad
  11:36:30.478 August 27: vcpu-0 | SIGNAL: battery 7FAE190B9608: 0 x 00000075 0x00000000 0 x 00000075 0x00000000
  11:36:30.478 August 27: vcpu-0 | Backtrace:
  ...

  I found also some workaround solutions:

  (1) Elimination of the soundcard virtual machine configuration: the virtual machine starts OK, but no sound;

  (2) set the option "use the card his physique" in the "Edit parameters of the virtual machine - equipment - sound card" window to ' OSS: / dev/dsp ': the virtual machine starts OK, with sound.

  There is a way to have two sounds without OSS and Wks 7.1.1 emulation work?

  Hello

  I'm in charge of the ALSA library in Mandriva.

  I've updated the ALSA-lib in 2010,1 repository main/test last week. You seem to have installed this version of libalsa test and found a problem.

  Look no further, upstream validations that I took in the library contained a typo. I now took the patch followed upstream.

  I have now updated the libalsa available in main/testing 2010.1, so please update and let me know if that solves the problem.

  FWIW, if you notice a problem with the packages in the main/testing repository, you should probably first of all contact Mandriva via the bugtracker is a project upstream. The test repository is generally fine, but obviously problems pass through (in this case, I didn't test certain aspects that determine this problem for example).

  In addition, if you do want to use the main/test, it is usually best to wait the official updates are published once it has been tested by others.

  All the best, (and I hope the update fixes this problem).

  Col

• Fatal error VMware Workstation: (svga) Exception 0xc0000005 (access violation) - VMware keeps crashing and our controls engineer was not able to understand, can someone help to solve?

  
  So I'm a summer at a paper factory and my boss, the engineer of controls has not been able to understand why VMware Workstation on a certain laptop hangs. I tried to create the log file I see posted the number of threads, but what I have is a compressed file which doesn't seem to have the info I've seen... or at least not in the same format. So I'm a complete newbie to VMware, and I searched the knowledge base and could not find any direct matches, at - it ready to help a newb? Really appreciate it and it would really help me as far as my training goes. TQ ahead!

  Just in case where I did maybe right I have attached two support files that I created.

  https://www.thebuddyforum.com/demonbuddy-Forum/65752-video-drivers-constantly-crashing-VMware-9.html

  I noticed that many people have the same problem with my computer when their computer/laptop has an AMD/ATI video card. Here's all I did and I got now work stations facing up and running for a week without any apparent problem

  1 back up your Virtual Machines a safe place and uninstall the workstation

  2 uninstall the AMD/ATI drivers

  3 reinstall the drivers

  4 reinstall the workstation

  5 follow the instructions below exactly to make a registry change

  a. Open regedit.exe and backup the registry, if you don't know how just google it is incredibly easy to make and the instructions are abundant so I don't post them here.

  b. open Notepad and enter the following text, make sure it is correct that the registry change can be risky, but if you enter the text exactly as it is below, you shouldn't have any problems because I have none. I take no responsibility if you have errors after this regedit so do at your own risk. Be sure and enter all the notebook INSTRUCTIONS below. DO NOT WRITE THE INSTRUCTIONS IN NOTEPAD IN YOUR NOTEPAD FILE. Everything below.

  NOTEBOOK INSTRUCTIONS

  Windows Registry Editor Version 5.00

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\GraphicsDrivers\DCI]

  "Timeout" = dword:00000014

  TdrDdiDelay "= dword:00000014".

  "TdrDelay" = dword:00000014

  "TdrLevel" = dword:000000

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\GraphicsDrivers]

  TdrDdiDelay "= dword:00000014".

  TdrDelay "= dword:00000014".

  TdrLevel "= dword:000000".

  END NOTEBOOK INSTRUCTIONS

  c. then navigate to the file and click on Save AS, when you arrive at the location you want to save the file, click the type box and change text to all documents, and then name the file regardless of your choice and add the .reg at the end. Once you have saved the file to its location and double click it to open it, windows will ask if you want to merge with the registry click Yes, windows will be also alert you on editing the registry and if you don't know that you want to try it go ahead and do it. So far, it has worked great for me.

  For more information about editing the registry, I used click here

• Fatal error VMware Workstation: (vmui)

  Hi all

  Suddenly, I had my 11 crash of vmware workstation, with this journal:

  https://BitBucket.org/snippets/Rakotomandimby/XB4g

  As I don't run it at session start I don't really know what action (an upgrade or what) broke...

  ArchLinux using up-to-date with the drivers again

  Do you want to know?

  After some pain, I saw the end of the tunnel:

  https://Aur.archlinux.org/packages/VMware-patch/?comments=all

• Need help fatal error 10 Workstation: (vmx)

  Hello

  I'm new on using the workstation and I ran into a problem when trying to create a couple of VM. I get this error message

  

  I am sure that VT - x and VT - d are enabled and I use good .iso files I'm not sure what the question is or how to fix 100%.

  He mentions in the logfile on the impossibility of locating a .vmx file but I was under the assumption that was created by 10 workstation.

  I have attached the log file to see if anyone thinks they can help I would appreciate it a lot!

  Thank you!

  Flashing is very likely to make a difference and firmware flashing can always be risky... so I advise not to go that route, if there is no update available.

  To work around the problem, follow the instructions at KB VMware: host power management causes problems with timing of comments on the Windows host add the following line to your config.ini file:

     host.cpukHz = "3400000"

  Who will tell Workstation to ignore the value of detritus that provides your host.  Now you should be able to on the virtual machines on this host.

  See you soon,.

  --

  Darius

• Fatal error VMware - pollVMX.c

  A week ago, my VM have been working well, never had a problem of any kind.  Today, none of them will start.  Google brought me to http://blog.laksha.net/2009/10/vmware-workstation-unrecoverable-error.html.  As an administrator seems to have solved the problem. Perhaps a MS security patch caused this, that's all I installed last week.

  14:55:16.057 Jan 19: vmx | Msg_Post: error

  14:55:16.057 Jan 19: vmx | http://Msg.log.error.unrecoverable Fatal error VMware Workstation: (vmx)

  14:55:16.057 Jan 19: vmx | NOT_IMPLEMENTED d:/build/ob/bora-203739/bora/vmx/main/pollVMX.c:3981

  14:55:16.057 Jan 19: vmx | http://Msg.panic.haveLog a log file is available in "x64\vmware.log E:\Virtual Machines\Windows 7 Enterprise".  [m

  sg.panic.haveCore] a core file is available in "E:\Virtual Machines\Windows 7 Enterprise x64\vmware-vmx - 5172.dmp".  [msg.panic.requestS

  upport.withLogAndCore] please request support and include the contents of the log file and the base file.  [msg.panic.requestSupport.vmSupp

  ORT. Windows]

  14:55:16.057 Jan 19: vmx | To collect the data to submit to the VMware support, choose "Collect load data" in the Help menu.

  14:55:16.057 Jan 19: vmx | You can also run the script 'vm-support' in the folder my computer directly.

  14:55:16.057 Jan 19: vmx | http://Msg.panic.response we will respond on the basis of your entitlement to support.

  14:55:16.057 Jan 19: vmx | -

  ---

  14:55:17.972 Jan 19: mks | Watched VTHREAD thread 0 "vmx" is dead

  19 jan 14:55:18.018: usbCCIDEnumCards | Watched VTHREAD thread 0 "vmx" is dead

  14:55:18.342 Jan 19: worker #0 | Watched VTHREAD thread 0 "vmx" is dead

  14:55:18.831 Jan 19: kbh | Watched VTHREAD thread 0 "vmx" is dead

  19 jan 14:55:18.831: WinNotifyThread | Watched VTHREAD thread 0 "vmx" is dead

  14:55:18.928 Jan 19: vcpu-0 | Watched VTHREAD thread 0 "vmx" is dead

  19 jan 14:55:18.945: aioCompletion | Watched VTHREAD thread 0 "vmx" is dead

  The last update 7 Workstation (7.0.1 - 227600 build) should solve this problem.

  http://www.VMware.com/support/WS7/doc/releasenotes_ws701.html

• fatal error VMware: (mks) after increasing memory

  Hello

  I'm using VMware workstation 6.5.3 build 185404.  Image has been created with 752MB RAM.

  Host and guest OS are Windows XP.

  Host has up to 4 GB, so I want to increase the memory of the image to 2 GB.

  After increasing the memory to 2 GB, when I start working with Visual Studio 2008, the image freezes and I get the following error:

  Fatal error VMware Workstation: (mks)

  13:59:53.070 Jan 05: mks | Exception 0xc0000005 (access violation) occurred

  If I display the memory back to 752MB, then fine. This behavior is the same on two different machines.

  I don't have a support contract.

  I have attached the log file.

  Any suggestion?

  Concerning

  Murali

  try commenting out these lines in your vmx for a test file:

  MemAllowAutoScaleDown = FALSE

  MemTrimRate = 30

  vmci0. Unrestricted = TRUE

  MKS. Enable3D = TRUE

  vmci0. Present = TRUE

  # allows you to comment out the lines

  ___________________________________

  VMX-settings- VMware-liveCD - VM-infirmary

• VMware Workstation VMX unrecoverable ERROR when starting a VMachine

  Hi all

  This is my first post and would really apreciate to help as I am facing a problem with VM Workstation (and with VMplayer)

  I installed an evaluation of VMware Workstation 9 on my PC (see attached the System Configuration.png).

  When you try to start a newly created VMachine I still get the same error you see in 2 attached images-screenshots 'fatal error VMX' and after that "cannot find a peer process valid to connect to" (see attachment VMware Player - Workstation and VMware Player - Workstation Error_02.png Error_01.png)

  I don't really know what else to try, I tried to reinstall VM Workstation 9, I uninstalled VM Workstation 9 and tryied with VMPlayer 4 and 5, but I still get the same error.

  As you can see in attachment System Configuration.png my motherboard is made with the NVidia GeForce 7100 Northbridge and SouthBridge NForce 630i2008.

  I have attached vmware.log and vmware-vmx - 3468.dmp

  I also check with VM tools boot cd and the results where 'compatible with VMWARE = YES ". only RDTSCP was: No.

  Can someone please? wouldn't be a problem of compatibility of equipment?

  Thank you in advance, I really apreciate any help.

  Costas

  Welcome to the community,

  Please take a look at http://kb.vmware.com/kb/1227 to see if this helps you solve the problem.

  André

• Error: "VMware Workstation has suspended this virtual machine because the disk on which the virtual machine is stored is almost full."

  I get this error message:

  VMware Workstation has suspended this virtual machine because the disk on which the virtual machine is stored is almost full. To continue, free 1.3 GB of additional disk space.

  I read up on the subject and found that I have to re size a partition. Anyone know what it could be? I can't find anything that looks like it has something to do with VMware. Does anyone know what size and what file system is it?

  My OS:
  Tumbleweed OpenSUSE x 64

  Thanks in advance

  On more creative, my home and root file systems were not extended to my full disk space :^)

• Fatal error VMware Infrastructure Client

  Hello.

  I use vSphere Client (version 4.1.0 build 258902) and vCenter Server (version 4.0.0 build 208111) with an IBM BladeCenter.  I am trying to download files on a satastore, but just as he begins to transfer I get this error and closes the client:

  VMware Infrastructure Client fatal error: (app-4048) <-this number changes every time, it's never the same

  Exception 0 x 80000003 (debug break point) has occurred.

  A core file is available in "C:\users\Dave\AppData\Roaming\VMware\vpxclient-3784.dmp".  Please

  ask for support and include the content of the core file.

  To collect the data to submit to the VMware support, run 'vm-support.

  We will respond on the basis of your entitlement to support.

  I get this error, regardless of the OS (tried Windows XP and 7), logged-in user or data store used (we have about 8).  Fails also on local storage for the blade so it can not be anything to do with the fiber storage attached.

  Anyone hit this problem before and have a solution?

  Thank you very much

  Dave

  If you use vCenter 4.0 I advise to use the same version for vSphere client because there has been some problems with the customer for 4.1 when used with mixed versions of ESX

  Let us know your results.

  If you have found this or other useful information, please consider awarding points to 'Correct' or 'useful '.

  f 10.

  VCP3, VCP4, HPCP, HP UX CSA

  http://KB.VMware.com/