Need help in selecting the color in the image and use it in other images.
I have about 10 photos of a drawing/character but the color is not consistent. How to select a color in the first drawing and then use that same color in all the
drawings so that he is there not differences in images?
On one of the drawings, use the eyedropper tool.
You can select the color of different sample sizes, 1-pixel average of 101 x 101.
And then double-click the color in the Color Palette and add it to your color chart.
Name your new shade.
Voila.
Tags: Photoshop
Similar Questions
-
Need help to select the value of the affected line
Hello! I need help to write a statement Select returns a value of the respective line in a table. I have a table that contains an id and a name of entity and a table of addresses with the lines of address, city, province/state, country, etc, which is linked through the identifier. There may be several lines in this table for any entity id given etc. which are distinguished by a type of address for example Mailing, billing, payment, shipping,. I'm writing a view that returns the name of the entity, the city and the State. I want to use the address of delivery, if it exists, otherwise, I want the broadcast address. One of these types of addresses will still exist, and it is possible that both will exist. I'm just back to SQL after a prolonged absence and am not familiar with some of the new features. I'm also new to the Oracle community. We are on Oracle 11.2. Any help would be greatly appreciated. Thank you!!
P.S. I posted this question a couple of weeks and got some responses. But I can't find the post. I thought I posted it here, but who knows! As I said, I'm new on this.
Hello
Here is an example of how to join another table to results of Top - N all:
WITH got_r_num AS
(
SELECT deptno, job, ename, sal, hiredate
Rank () OVER (PARTITION BY deptno
CONTROL OF CASE work
WHEN PRESIDENT", THEN"A ".
WHEN 'MANAGER' THEN 'B '.
END
) AS r_num
FROM scott.emp
WHERE job IN ('MANAGER', 'PRÉSIDENT')
)
SELECT d.deptno, d.dname
r.ename, r.job, r.sal, r.hiredate
Got_r_num r
JOIN scott.dept d.deptno d = r.deptno
WHERE r.r_num = 1
ORDER BY d.deptno
;
-
VPN requirements, need help in selecting the right technology
I need help choosing correct vpn technology to meet my needs.
I have a 2801 router I will use for vpn sessions. I use 871 routers of the series for remote clients. The requirements that make it difficult for me to determine how to configure are:
The IP WAN routers 871 will be dynamic, so I can't use lan to lan standard IPSEC configuration. The solution must allow the connection of any address.
Remote sites will also have to pass traffic between remote sites. I need to do this, because this VPN will be used for IP phones and I want clients on remote sites to be able to call each other.
Some of the solutions I've seen require the remote user enter a user name and password of the CLI on their 871 to bring up the tunnel. If it's possible I don't want it's an addiction.
I am familiar with cisco routers and can usually do a config works if provided an example, but I don't know enough about the various VPN options to choose the right solution. Any help is greatly appreciated.
Thank you
If you need a spoke-to-spoke vpn connection as well, you can try DMVPN.
http://www.Cisco.com/en/us/products/ps6658/prod_presentation_list.html
-
Validate the behavior is not available - need help with selecting the & quot; shape & quot;
Okay, so I tried the following and even tried TROUBLESHOOTING from Dreamweaver 8 text instructions, but I still can't understand.
Quote:
1. select the form, click on the button add behavior + in the behaviors panel and then click on validate the form. The dialog box validate form opens. See Figure 9-40. (Text of p. 521 of Dreamweaver 8)
Problem? If the form validation behavior is not available, youhave selected probably the table, a cell, or another part of the form rather than the form itself. Click in the Document window, and then repeat step 1. You will know that you have selected the shape when the shape attributes appear in the property inspector. -
Need help to resolve the query by using analytic functions
Hello
I need help to solve this problem, I tried an analytical function but could not solve the problem.
I have three table as illustrated below the table is filled with a flat file. The records are arranged sequentailly based on the name of the file.
The first record of the game based on EIN goes to TAB_RCE
the following records then goes to TAB_RCW
and last save of the game based on EIN goes to the RCT table
How can I make groups and
assign a
EIN * 12345 * line number * 02, 03, 04 * in the table TAB_RCW and * 05 * in the table TAB_RCT
EIN * 67890 * line number * 07, 08, 09,10 * in the table TAB_RCW and * 11 * in the table TAB_RCT
and so on...
Thank you
Rajesh
TAB RCE_--------------------------------------------------------------
LineNumber EIN FILENAME TYPE
-----
01 12345 ABC NCE. TXT
06 67890 ABC NCE. TXT
12 76777 ABC NCE. TXT
-----
TAB_RCW
-----
LineNumber TYPE SSN FILENAME
-----
02 22222 ABC RCW. TXT
03 33333 ABC RCW. TXT
04 44444 ABC RCW. TXT
07 55555 ABC RCW. TXT
08 66666 ABC RCW. TXT
09 77777 ABC RCW. TXT
10 88888 ABC RCW. TXT
13 99998 ABC RCW. TXT
14 99999 ABC RCW. TXT
-----
TAB_RCT
-----
NAME OF THE FILE OF TYPE LINENUMBER
-----
RCT 05 ABC. TXT
RCT 11 ABC. TXT
RCT 15 ABC. TXT
-----SQL> with TAB_RCE as ( 2 select 'RCE' rtype,'01' linenumber, '12345' EIN,'ABC.TXT' FILENAME from dual union all 3 select 'RCE','06','67890','ABC.TXT' from dual union all 4 select 'RCE','12','76777','ABC.TXT' from dual 5 ), 6 TAB_RCW as ( 7 select 'RCW' rtype,'02' linenumber,'22222' ssn,'ABC.TXT' FILENAME from dual union all 8 select 'RCW','03','33333','ABC.TXT' from dual union all 9 select 'RCW','04','44444','ABC.TXT' from dual union all 10 select 'RCW','07','55555','ABC.TXT' from dual union all 11 select 'RCW','08','66666','ABC.TXT' from dual union all 12 select 'RCW','09','77777','ABC.TXT' from dual union all 13 select 'RCW','10','88888','ABC.TXT' from dual union all 14 select 'RCW','13','99998','ABC.TXT' from dual union all 15 select 'RCW','14','99999','ABC.TXT' from dual 16 ), 17 TAB_RCT as ( 18 select 'RCT' rtype,'05' linenumber,'ABC.TXT' FILENAME from dual union all 19 select 'RCT','11','ABC.TXT' from dual union all 20 select 'RCT','15','ABC.TXT' from dual 21 ) 22 select rtype, 23 last_value(ein ignore nulls) over(partition by filename order by linenumber) ein, 24 linenumber, 25 ssn 26 from ( 27 select rtype, 28 linenumber, 29 ein, 30 to_char(null) ssn, 31 filename 32 from TAB_RCE 33 union all 34 select rtype, 35 linenumber, 36 to_char(null) ein, 37 ssn, 38 filename 39 from TAB_RCW 40 union all 41 select rtype, 42 linenumber, 43 to_char(null) ein, 44 to_char(null) ssn, 45 filename 46 from TAB_RCt 47 ) 48 order by linenumber 49 / RTY EIN LI SSN --- ----- -- ----- RCE 12345 01 RCW 12345 02 22222 RCW 12345 03 33333 RCW 12345 04 44444 RCT 12345 05 RCE 67890 06 RCW 67890 07 55555 RCW 67890 08 66666 RCW 67890 09 77777 RCW 67890 10 88888 RCT 67890 11 RTY EIN LI SSN --- ----- -- ----- RCE 76777 12 RCW 76777 13 99998 RCW 76777 14 99999 RCT 76777 15 15 rows selected. SQL>SY.
-
Need help, connect to the wifi and Panel set to work.
Let me start by saying that I recently downloaded malware bytes and microsoft security essentials. Malware found 4 corrupted files. I deleted the and also received a warning that the files needed to restore. I restarted the computer and then I realized that the computer wouldn't connect to the Internet wirelessly. There is no any wifi connection possible. I tried to access the firewall via the Control Panel, but I received a message saying that something is misspelled, and I needed to check my spelling and try again. I can't access anything in the control panel. I then returned to malicious software and restored the files and I don't know if it restored. Again, I have no wireless connections and cannot use Control Panel. I did a restore there when I knew that nothing was wrong with her, but he says that there is no change for a week about a week ago. I need help!
What are the 'properties' can you get not to?
If you were not able to see something like this picture--> http://www.askdavetaylor.com/4-blog-pics/windows-system-properties.jpg
or you have to this Properties dialog box, but the part of the circle includes all mention of the Service Pack,
Then, it's probably time for you to go to a good independent store (place of type no BigBoxStoreUSA or geeksquad) computer repair. If they think they can reinstall Windows, ask them to back up your data (files, photos, music) first. Ask them to tell you the consequences of reinstalling Windows before they do.
-
Need help to reallocate the space and get rid of the double partitions?
Can someone help me to reassign my data partition? I was trying to dual boot my computer with windows 8 and linux, but I failed miserably a year ago. After a month of research, I managed to get into my windows installation; However, all the data is irrelevant. I'm pretty sure that I moved my EFI boot files... something like that is called... I moved it in this space of 22 GB which is WAYYYYYYYYYY to much space for these files, which require that... ? 1000 mb or more? Anyway. I need help this hot mess of fixing. Thanks for any help. I really appreciate it. I know virtually nothing about it. Perhaps someone can guide me on how to fix everything by using linux? If there is there any program that can solve this too, that would be great. A free solution would be appreciated. Thank you all.
Hello
Thank you for visiting Microsoft Community.
According to the description, I understand that you want to delete the partitions created on your PC under Windows 8 double. I will certainly help you to question.
I suggest you refer to the suggestion made by Yann replied on 9 April 2015 from the link below:
Hope this information helps
Meet us with the State of the question.
Sincerely,
Ankit Rajput
-
Need help to change the background and more
Hey everybody! This is my first post on this forum so excuse me if its not very good.
Now, at school, we experience a realization project and I and my group want to impress the teacher really a lot of movies. We decided that our film will be defined on a boat on the way to the sink, and before it sinks you get to know the different families/people on the boat and how all this turns out to these families when the boat begins to sink. But the problem is that we don't have a boat. But I have after effects, and a normal size sheet that is completely blue, which can be used as a blue screen!
I know how to chroma key easily, but some scenes are in need of a big blue screen we have
So I spent a few hours now looking for a tutorial on how maybe change the background without anything like a blue screen , but I can't seem to find a good tutorial that helps me with what I want help with.E.g. one of our scenes are cars climbing on the boat and the blue screen is not big enough to cover the entire car and the Earth under our car is gravel, and I can't have that. So is there anyone here who knows a few videos on the internet that could help me, or a kind soul who could write me a text tutorial on how to do this?
/ Friendly, Axel.
(btw I'm Swedish so excuse for bad spelling/grammar)There are many times when a green screen is not wide enough to cover all the material. You end up using a combination of green screen and Rotoscoping. In your car drive you to the boat example would position the blue screen before the blue screen was behind the windows of the car because that would be the most difficult parts of the car for Rotoscoping in hand. It would be easy enough to rotoscope the wheels and underside of the car.
Take a look at this video from Lynda.com - a really great source after effects training. It will show you how the various masks are used to clean up a green screen when it does cover the whole.
There was a lot of publicity for Singapore Airlines called Across the World who had an actress works continuously with a shot that she moved seamlessly from San Francisco to Paris to Venice and across transitions, she walked in front of a green screen that was just big enough to cover here head and shoulders because it is very difficult to rotoscoping hair and hands when they move. I took a quick glance for the behind the scenes video that was produced when they initially released the commercial but couldn't find the exact. If you look closely in this video, you will see people moving green screens around as she walks.
This technique is still used on hit movies. Note here the green screen that does not hide the bottom of everything, just the parts that would be very difficult if not impossible to Rotoscoping.
-
need help to understand the ACLs and security levels
I use static NAT (nat (inside, outside) static interface) between a single host inside for the DHCP address used on the external interface. The inside interface has the security level of 100, and the outside has the security level of 0. My understanding is that for connections with State, I wouldn't need the ACL. However, nothing works unless I set up an ACL (for example, right now I have a global allow rule). What Miss me?
Even if you 'dormant', but you still have the access list applied on the interface which, by default, will have the "deny ip any any" implicitly at the end of the access eventhough list you have existing line "inactive".
To remove access from the inside of the interface completely list, you must remove the following line:
inside_access_out access to the interface inside group
-
PS Newb needs help with resizing the image and print several sheet
Hi, I am using PS CS3 to resize an image, I have so I can print to use as a map for a miniatures game. I have no problem of scaling of the image to the appropriate size, but I can't understand how to print multiple image 8.5 x 11 sheets. I thought I saw an option for such a procedure before, but maybe it was in another editing program. If anyone has any ideas on how I could do this I would really appreciate hearing about them. Thank you!
Illustrator and InDesign are tiled printing, like CorelDraw. Photoshop, this title is not, but may be a few script for this. In your case, the simplest solution would be to save the file in PDF format and have Acrobat print a tiled (Page scaling of parameter in Acro print dialog box). You just need to make sure that your page corresponds to several pages. Unliek AI and ID, Acro chop only stuff based on standard paper sizes...
Mylenium
-
need help to load the image from a xml file
(Based on the example of Chapter 10, ActionScript 3.0 for ADOBE FLASH CS4, IPC)
By using the 'setSong' function, I shoot with success of the < artist > child of my xml data, no problem. But I also have to display the jpg file in the < image > node and I meet a lot of difficulties. I tried adding more variables to the setSong function, but am frustrated. Someone could shine a little light and point this beginner in the right direction?function setSongs (): void {}
for (var i = 0; i < 4; i ++) {}
var artistText:String = songList_XML.song [i + songCount] .artist;
Customizer var = this ["song" + (i + 1)] .artist;
clipArtist.text = artistText;
}
}myXML:
<? XML version = "1.0" encoding = "utf-8"? >
< songlist >
song <>
< image id = "1" > images/dummyFace1.jpg < / image >
< artist > first guy < / artist >
< album > Aliquam neque dui, sold at, egestas nec, egestas dignissim, tortor. < / album >
< / song >song <>
< image id = "2" > images/dummyFace2.jpg < / image >
< artist > second person < / artist >
ante < album > Nam. Metus had integer and lacus accumsan commodo. < / album >
< / song >song <>
< image id = "3" > images/dummyFace3.jpg < / image >
< artist > third Fellow < / artist >
< album > Cras non sem vitae massa pharetra sold. Integer outbound < / album >
< / song >song <>
< image id = "4" > images/dummyFace4.jpg < / image >
Fourth individual < artist > < / artist >
< album > surpassing ullamcorper quam and ipsum. Aenean sed lacus sit amet leo so restore. < / album >
< / song >
< / songlist >:
function setSongs (): void {}
for (var i = 0; i)< 4;="" i++)="">
var artistText:String = songList_XML.song [i + songCount] .artist;
Customizer var = this ["song" + (i + 1)] .artist;
clipArtist.text = artistText;var ldr:Loader = new Loader();
var urlR:URLRequest = new URLRequest (image songList_XML.song [i + songCount]);
LDR. Load (urlR);
LDR.x = Whatever (i);
LDR.y = whateverelse (i);
addChild (ldr);
}
}myXML:
images/dummyFace1.jpg
First guy
Aliquam neque dui, sold at, egestas nec, egestas dignissim, tortor.
images/dummyFace2.jpg
Second person
Nam ante. Metus had integer and lacus accumsan commodo.
images/dummyFace3.jpg
Third Member
CRAs non sem vitae massa pharetra sold. Integer is.
images/dummyFace4.jpg
Fourth person
Surpassing ullamcorper quam and ipsum. Aenean sed lacus sit amet leo so restore.
-
I don't like political new goggle, which begins in March 2012.
I don't want to see in the middle of my search bar of glasses display only one option. How to change it to any other intelligent research, such as the top of the screen, I use BING, but it's a bit like small space to see what I typed.
TYHi larafox,
Copy this address: https://duckduckgo.com/
Open Tools (Alt + T) > general, paste the address copied in the box next to Homepage:, click on the box (above) next of when Firefox starts: replace the show my home page option, and then click OK below.
-
Need help to reset the values and toggle items based on a value
Experts,
I have a problem with the set_item_property
Here's the background. I have a form with a single block, and a canvas. He has 10 points, depending on the value of the first element, the remaining items can be enabled or disabled.
I wrote a trigger "pre-record", whereas before the outputs in the new record based on the value of the first element of the new record the other elements in the new record are enabled or disabled.
The problem is any value of the box, if I put it in set_item_property ('blockname.item_name ', set', property_false), sound very good, but in a new record, when I tried to
activate the same element to help set it set_item_property('blockname.item_name',enabled,'property_true) it does not work.
In singles, I can do as property_false but not back to property_true.
And when I used the command set_item_property ('blockname.item_name ', on', ") to reset the value back to its design time value form is to throw an error
withMessage ' FRM-41046'.»
Guys I need your help on this. Please let me know how can I this and why the error message when I try to reset the value.Property_false value ENABLED also affect the Update_allowed/Navigable FALSE at the same time. You must set these properties to return true explicitly, if that's what you hear ' market do not. Search for 'Propagation of changes to property' in Froms help for more details.
-
need help to copy the profile and find the menu bar.
I am trying to move my files of thunderbird etc to a new computer and need to do it manually due to hardware problem causing no internet. I tried going in C file and found Thunderbird. No other success find the bar of menus or profile. This is why I have no where to type in the string of words that give instructions. Also instead of 'name' how to find the name?
I never did move, but this article treats d'it.http://kb.mozillazine.org/Move_to_a_new_PC
-
Need help to calculate the start and end time and place the result in a term like text box
I did a search on the forum for calculating start and end time and found the code depending on which I am using as a formcalc on the duration field.
==============================================================
Form1. Page1.duration::calculate - (FormCalc, client)
If (HasValue (StartTime) and HasValue (EndTime)) then
industrial var = Time2Num (StartTime.formattedValue, "h: mm A")
var = Time2Num out_ (EndTime.formattedValue, "h: mm A")
If (IN2 > = out_) then
xfa.host.messageBox ("start time cannot be greater than or equal to the end time.")
$.rawValue = null
on the other
var out_ - IN2 = diff
$.rawValue = diff/3600000
endif
on the other
$.rawValue = null
endif
=============================================================
Then, when I enter for example from 15:30, an hour of beginning and end of 04:00
The duration field will say 0.5
How can I get my form to say 30 minutes instead of placing a decimal?
Secondly, how can I use field models LC where the employee can just type 330 or 03:30 and it automatically based on the computer's clock on time to start 15:30?
Any help will be greatly appreciated. Thank you.Attached is the form for display:
https://Acrobat.com/#d=f1kxh5qjuow5ujyZduF8OQ
To view the results in a regular time format, you can use:
$.rawValue = Num2Time (diff/3600000, "HH: mm")
For a flexible time entry check this example.
http://thelivecycle.blogspot.com/2011/05/flexible-Eingabe-von-Daten-und-Zeiten.html
Maybe you are looking for
-
How long should you wait after badly answering security questions too many times in a row
How long should you wait after badly answering security questions too many times in a row
-
Bad year mentioned in the emails on Outlook Express.
Original title: outlook
-
Original title: send Inbox problems If I attach a pdf file to my outgoing mail, it lies in the Outbox and will not send then I get an error message, send e-mails with no attactments is no problem
-
LAN-to-LAN tunnel between VPN 3000 and Cisco 1721
Hello I have a current LAN-to-LAN tunnel configuration between VPN 3000 (3.6) and Cisco 1721 (12.2 (11) T). When I use the encryption = authentication and Des-56 = ESP\MD5\HMAC-128 for the IPSec Security Association, everything works fine. However, I
-
I'm sorry. Cannot complete your purchase at this time for the Pinball FX2 at Microsoft Store
I'm a little tired of seeing this message. I tried for hours!Tables for Pinball FX 2 Also having to enter my password every time I try my God it's a real pain!