Need help! Interlocked switches or buttons

Similar Questions

• Need help to connect the buttons

  Can someone help me with this problem I have.

  I have a gfx I created 6 forms and them transformed from simple buttons. I have URL was sitting inside an xml file. How can I get the buttons to use the URL of the value in the xml file?

  Also how can I change the current external photo which is responsible for loading the url of a framework in the same xml file.

  I hope you arnt as confused as I am right now.

  I packed the flash file that includes the xml aswell.

  If someone could help me with this, I would be very grateful.

  Thank you all

  http://www.onlineaddicts.co.UK/menu.rar

  Remove all btns code, paste it below on the main timeline

  Also, no need to charge twice as much than the dome in the image container...

  Give an instance name to the outer container of the btns - menumv

  Use the following of the openURL method, use the same one for all the inclinometer...

  	import flash.events.Event;
  	import flash.events.MouseEvent;
  	import flash.net.URLLoader;
  	import flash.net.URLRequest;

  var myXML:XML;

  var myLoader:URLLoader = new URLLoader();

  myLoader.load (new URLRequest ("links.xml"));

  myLoader.addEventListener (Event.COMPLETE, processXML);

  function processXML(e:Event):void

  {

  	myXML = new XML (e.target.data);
  	trace (myXML);
  	menumv.carbtn.addEventListener (MouseEvent.CLICK, openURL);

  }

  function openURL(e:MouseEvent):void

  {

  navigateToURL (new URLRequest (myXML.car.url));

  }

  --

  http://www.darshanrane.com

• Need help with Add/Remove buttons work field

  Someone here on the forums had previously helped me to get a button set up a form that would add an additional text field to a form.  I need now to a separate created button that will remove a text field in the case where too many have been added.  I hope someone can help me with this because my XML knowledge is virtually nil.  It's not like I can upload files to the forum here, so I'll try to paste my code.  I just need to get the "-" button to subtract a line.  Thanks in advance for the help.

  -Chris

  <? XML version = "1.0" encoding = "UTF-8"? >

  <? XFA generator = APIVersion "AdobeLiveCycleDesignerES_V8.2.1.4029.1.523496" = "2.8.9029.0?" >

  " < = xmlns:xdp xdp:xdp ' http://ns.Adobe.com/XDP/ " "timeStamp ="2010-06 - 28 T 16: 04:04Z" uuid = "081329f3-4914-4dde-87ae-75a83da8434e" >

  " < model xmlns =" http://www.XFA.org/schema/XFA-template/2.6/ ">

  <? formServer defaultPDFRenderFormat acrobat8.1static? >

  < name of the subform = "form1" layout = "CT" local = "en_US" >

  < Pagesand >

  < name Pagearea = "Page1" id = "Page1" >

  < contentArea x = 'No 19.05 mm' y = '12.7 mm"w ="190.5 mm"h ="266.7 mm"/ >

  < average stock = "default" short = long "612pt" = "792pt" / >

  <? templateDesigner expand 1? > < / pageArea >

  <? templateDesigner expand 1? > < / Pagesand >

  < subform w = "7.5" in h = "10.5" in name = "Page1" >

  < subform w = y "174,625 mm" = "79,377 mm" name = "Current_Objectives" layout = "CT" >

  < subform w = h "174,625 mm" = "9,522 mm' name = 'Objective' >

  < = minH "txt_currobj" field name = '8,263 mm"w = mm"174,625">

  < ui >

  < textEdit multiLine = "1" >

  < border >

  <? templateDesigner styleId aped3? >

  < STROKE edge = "lowered" / >

  < / border >

  < margin / >

  < / textEdit >

  < /UI >

  < font size = cast '11pt' = "Verdana" / >

  < topInset margin = ' 1 mm ' bottomInset = ' 1 mm ' leftInset = ' 1 mm ' rightInset = ' 1 mm "/ >

  < para vAlign = "middle" / >

  < caption reserve '7,76 mm' = >

  < para vAlign = "middle" / >

  < value >

  < text > 1. < / text >

  < / value >

  < font size = cast '11pt' = "Verdana" / >

  < / legend >

  < activity = 'initialize' name = "event__initialize" >

  < script contentType = "application/x-javascript" > this.caption.value.text.value = (this.parent.index + 1) + "."

  < /script >

  < / event >

  < / field >

  < occur max = "-1" / >

  <? templateDesigner expand 1? > < / subform >

  < field h = "5.08 mm" name = "curr_obj_add_line" w '5.08 mm' = >

  < ui >

  < button nail = 'push' / >

  < /UI >

  < character = "Arial" / >

  < caption >

  < value >

  < text > + < / text >

  < / value >

  < para hAlign = "center" vAlign = "middle" / >

  < character = "Arial" / >

  < / legend >

  < border = 'right' hand >

  < STROKE edge = "raised" / >

  < filling >

  < color value = '212, 208, 200' / >

  < / filling >

  <? templateDesigner styleId apbx2? > < / border >

  < link match = "none" / >

  < help >

  < toolTip > add < / ToolTip >

  < / help >

  < activity = "click on" name = "event__click" >

  < script contentType = "application/x-javascript" >

  _Objective.addInstance (1)

  < /script >

  < / event >

  < / field >

  < field h = "5.08 mm" name = "curr_obj_del_line" w '5.08 mm' = >

  < ui >

  < button nail = 'push' / >

  < /UI >

  < character = "Arial" / >

  < caption >

  < value >

  < text > - < / text >

  < / value >

  < para hAlign = "center" vAlign = "middle" / >

  < character = "Arial" / >

  < / legend >

  < border = 'right' hand >

  < STROKE edge = "raised" / >

  < filling >

  < color value = "212,208,200" / >

  < / filling >

  <? templateDesigner styleId apbx2? > < / border >

  < link match = "none" / >

  < help >

  < toolTip > delete an element < / ToolTip >

  < / help >

  < activity = "click on" name = "event__click" >

  < script contentType = "application/x-javascript" >

  _Objective.deleteInstance (1)

  < /script >

  < / event >

  < / field >

  <? templateDesigner expand 0? > < / subform >

  <? templateDesigner expand 1? > < / subform >

  < desc >

  < name of text = 'version' > 8.2.1.4029.1.523496.503679 < / text >

  < / desc >

  <? templateDesigner expand 1? > < / subform >

  <? templateDesigner DefaultLanguage FormCalc? >

  <? templateDesigner client DefaultRunAt? >

  <? Acrobat JavaScript strictScoping? >

  <? templateDesigner Zoom 100? >

  <? templateDesigner grid see the: 1, wink: 1, units: 0, color: ff8080, origin: (0,0), interval: (125000,125000)? >

  <? templateDesigner 26 FormTargetVersion? >

  <? templateDesigner 1 SaveTaggedPDF? >

  <? templateDesigner 1 SavePDFWithEmbeddedFonts? >

  <? templateDesigner horizontal management: 1, vertical: 1, guidelines: 1, crosshairs:0? > < / template >

  " < config xmlns =" http://www.XFA.org/schema/XCI/2.6/ ">

  < name of agent 'designer' = >

  PDF of < destination > < / destination >

  < pdf >

  <!-[0 n]->

  < fontInfo / >

  < / pdf >

  < / agent >

  < date >

  <!-[0 n]->

  < pdf >

  <!-[0 n]->

  < version > 1.7 < / version >

  < adobeExtensionLevel > 1 < / adobeExtensionLevel >

  < / pdf >

  < common / >

  < script >

  Server < runScripts > < / runScripts >

  < /script >

  < xdp >

  packs of <>* < / packages >

  < / xdp >

  < / date >

  <? originalXFAVersion http://www.XFA.org/schema/XCI/2.8/ ? > < / config >

  " < Romagna xmlns =" http://www.XFA.org/schema/XFA-locale-set/2.6/ ">

  <? originalXFAVersion http://www.XFA.org/schema/XFA-locale-set/2.6/ ?>

  < name of locale = 'en_US' desc 'English (United States)' = >

  < name calendarSymbols = "Gregorian" >

  < monthNames >

  < month > January < / month >

  < month > February < / month >

  < month > March < / month >

  < month > April < / month >

  < month > may < / month >

  < month > June < / month >

  < month > July < / month >

  < month > August < / month >

  < month > September < / month >

  < month > October < / month >

  < month > November < / month >

  < month > December < / month >

  < / monthNames >

  < abbr monthNames = "1" >

  < month > Jan < / month >

  < month > Feb < / month >

  < month > Tue < / month >

  < month > after < / month >

  < month > may < / month >

  < month > Jun < / month >

  < month > Jul < / month >

  < month > August < / month >

  < month > Ms < / month >

  < month > Oct < / month >

  < month > Nov < / month >

  < month > Dec < / month >

  < / monthNames >

  < dayNames >

  < day > Sunday < / day >

  Monday < day > < / day >

  < day > Tuesday < / day >

  < day > Wednesday < / day >

  < day > Thursday < / day >

  < day > Friday < / day >

  < day > Saturday < / day >

  < / dayNames >

  < dayNames abbr = "1" >

  < day > Sun < / day >

  < day > LUN < / day >

  < day > Tue < / day >

  < day > sea < / day >

  < day > set < / day >

  < day > sat < / day >

  < day > Sat < / day >

  < / dayNames >

  < meridiemNames >

  < meridiem > AM < / meridiem >

  < meridiem > AM < / meridiem >

  < / meridiemNames >

  < eraNames >

  < age > BC < / era >

  < age > AD < / era >

  < / eraNames >

  < / calendarSymbols >

  < datePatterns >

  < name datePattern 'full' = > EEEE, MMMM D, YYYY < / datePattern >

  < name datePattern = "long" > D MMMM, YYYY < / datePattern >

  < name datePattern "med" = > MMM D, YYYY < / datePattern >

  < name datePattern "short" = > d/m/YY < / datePattern >

  < / datePatterns >

  < timePatterns >

  < name timePattern 'full' = > SS A Z < / timePattern >

  < name timePattern = "long" > SS A Z < / timePattern >

  < name timePattern "med" = > SS A < / timePattern >

  < name timePattern 'short' = > h: mm A < / timePattern >

  < / timePatterns >

  < dateTimeSymbols > GyMdkHmsSEDFwWahKzZ < / dateTimeSymbols >

  < numberPatterns >

  < name numberPattern 'digital' = > z, zz9.zzz < / numberPattern >

  < name numberPattern = "currency" > $z, zz9.99 | ($z, zz9.99) < / numberPattern >

  < name numberPattern = '%' > z, zz9% < / numberPattern >

  < / numberPatterns >

  < numberSymbols >

  < name numberSymbol 'decimal' = >. < / numberSymbol >

  < numberSymbol = "group" name >, < / numberSymbol >

  < name numberSymbol = '%' > % < / numberSymbol >

  < numberSymbol name = 'less' > - < / numberSymbol >

  < numberSymbol name = "zero" > 0 < / numberSymbol >

  < / numberSymbols >

  < currencySymbols >

  < currencySymbol = 'symbol' name >$ < / currencySymbol >

  < name currencySymbol = "isoname" > $ < / currencySymbol >

  < currencySymbol = "decimal" name >. < / currencySymbol >

  < / currencySymbols >

  <>fonts

  < name of font = 'Myriad Pro' / >

  < name of font = "Minion Pro" / >

  < name of font = "Courier Std" / >

  < name of font = "Adobe Pi Std" / >

  < name of font = "Adobe Hebrew" / >

  < name of font = 'Adobe Arabic' / >

  < name of font = 'Adobe Thai' / >

  < name of font = "Kozuka Gothic Pro - VI M" / >

  < name of font = "Kozuka Mincho Pro - VI R" / >

  < name of font = 'Adobe Ming Std L' / >

  < name of font = "Adobe song Std L" / >

  < name of font = "Adobe Myungjo Std M" / >

  < / font >

  < / locale >

  < / Romagna >

  < xmlns: x x: xmpmeta = "adobe: ns:meta / ' x: xmptk =" Adobe XMP Core 4.2.1 - c041 52.337767, 2008/04/13-15: 41:00 ">" "" "

  " < RDF: RDF = xmlns:rdf ' http://www.w3.org/1999/02/22-rdf-syntax-ns# ">

  " < Xmlns:xmp = RDF" http://ns.Adobe.com/Xap/1.0/ "rdf: about =" "> "

  < xmp:MetadataDate > 2010-06-28 T 16: 04:04Z < / xmp:MetadataDate >

  < xmp:CreatorTool > Adobe LiveCycle Designer ES 8.2 < / xmp:CreatorTool >

  < xmp:ModifyDate > 2010-06-28 T 11: 28:54 - 04:00 < / xmp:ModifyDate >

  < xmp: CreateDate > 2010-06-18T 11: 45:23 - 04:00 < / xmp: CreateDate >

  < / RDF: Description >

  " < Xmlns:pdf = RDF" http://ns.Adobe.com/PDF/1.3/ "rdf: about =" "> "

  < pdf:Producer > Adobe LiveCycle Designer ES 8.2 < / pdf:Producer >

  < / RDF: Description >

  " < Xmlns:xmpMM = RDF" http://ns.Adobe.com/Xap/1.0/mm/ "rdf: about =" "> "

  < xmpMM:DocumentID > uuid:081329f3-4914-4dde-87ae-75a83da8434e < / xmpMM:DocumentID >

  < xmpMM:InstanceID > uuid:4d9ea5d0-fbf1-4be5-8aa5-b9c828a765e9 < / xmpMM:InstanceID >

  < / RDF: Description >

  " < Xmlns = RDF" http://purl.org/DC/elements/1.1/ "rdf: about =" "> "

  < dc:format > application/pdf < / dc:format >

  < / RDF: Description >

  " < Xmlns:desc = RDF" http://ns.Adobe.com/XFA/promoted-desc/ "rdf: about =" "> "

  < desc:version rdf:parseType = "Resource" >

  < rdf: value > 8.2.1.4029.1.523496.503679 < / rdf: value >

  < desc:ref >/template/subform [1] < / desc:ref >

  < / desc:version >

  < / RDF: Description >

  < / RDF: RDF >

  < / x: xmpmeta >

  " < xfdf xmlns =" http://ns.Adobe.com/XFDF/ "XML: Space ="preserve"> "

  < annots / >

  < / xfdf > < / xdp:xdp >

  Hello

  It is difficult to see the XML Source what is happening. There are sites like YouSendIt.com or Acrobat.com where you can download files from file sharing.

  In any case, I see the Add button, then the delete row button would look like:

  _Objective.removeInstance(this.parent.index);
  

  The underscore character is a shortcut for instanceManager. I suspect that the goal is the repetitive element. It is easier to include the button Delete a row in the repeating line, in this way the user can select which line they want to delete.

  There is an example here: https://acrobat.com/#d=tdpzltrl25yU2PkvgaQO9w

  Look in the click event of the button 'X '.

  Good luck

  Niall

• Need help to stop stop button on my machine of the State system

  Hello

  Can someone help me understand please why my STOP can't stop the state machine, I want to stop the program, that the program is running... and it's sad to say, on my side, that, when I pressed the stop button it won't stop until the loop ends. and what I really want to stop it even the loop runs. I have attached here for your reference my vi...

  Thank you and best regards,

  syrpimp

  

  

  
  

• Broken 300 SG - need to reset switch Reset button

  I can't reset my switch and realized that the reset button is missing/broken.  Is there another method to reset the switch to factory settings?  If this is not the case, how to find the IP address of the web interface, it is not the default.

  Hi Mark,

  You can try a free tool like Angry IP Scanner to scan the subnet and search for all devices or install the toolbar FindIT in your browser that will locate the switch.

  http://www.Cisco.com/en/us/products/ps10660/index.html

  -Marty

• Need help distributed switch

  My lab at home is built entirely in ESXi 5. In other words: a physical host with two VirtualHost ESXi ESXi 5 remaining with at. My data store is a race off the coast of SAN virtualized FreeNas.

  The question that I meet is when I create a Virtual Switch distributed and the establishment is looking for a physical network card. Is there a way to get around this? I could create a vDS to a virtual NETWORK adapter? If so, how?

  Your help wil greatly appreciated.

  The wizard could cause the interruption very you speak if she were to offer this option ;-)

  In avoiding or minimizing disturbance is a challenge of the migration of the distributed switch standard, in a lab like this is less of a concern, of course, imagine if it were a production environment! If you were to follow an approach to the real world, you would look to have all your switches using grouping of NETWORK cards in a first time, the process would be:

  0 migrate virtual machines on a host

  1. remove 1 NETWORK card in the standard switch NIC team

  2. create the distributed switch and add the host by using the NETWORK card removed in step 1 as the first uplink

  3 migrate or create the ports for the distributed switch group

  4. remove the remaining standard switch NETWORK card and add it to the distributed switch

  5. proceed to the next host

  I would complement the management process of network cards on a per host basis, of course, you just create a single switch distributed in total.

  Who is?

• Need help with Motion Tracking-button in After Effects CS6

  Hello I just bought After Effects cs6 and wanted to try 'motion tracking' but I can't just push the button of motion tracking. Is there anyone who can help me with this problem?

  The responses are much appreciated!

  Are you following the instructions here?

• Need help to create a button on a page of interactive report.

  Hello everyone,
  
  I am trying to create radio buttons on a page of interactive report. Here are sql, used for the radio and interactive report button:
  
  Select apex_item.radiogroup(1,a.key_atm_insp) as "select."
  b.KEY_LOCATION,
  b.NME_INST,
  b.ADR_STREET,
  b.ADR_CITY,
  b.ZIP,
  a.KEY_ATM_VIOLATION,
  a.KEY_ATM_INSP
  ATM_VIOLATION a.,
  ATM_BRANCH_INFO_TT b
  where b.KEY_LOCATION = a.KEY_LOCATION;
  
  Above sql create several lines, but do not create the radio button instead show the text as ' < input type = "radio" name = value "f01" = "29039" / > "on the browser. Here is an example of one of the line that displays o browser.
  --------------------------------------------------------------------------------------------------------------------------------------------------------------
  < input type = "radio" name = "f01" value = "29039" > 48552 JPMorgan Chase Bank, National Association 82 road & Route 376 Hopewell Junction 12533 693 29039
  --------------------------------------------------------------------------------------------------------------------------------------------------------------
  
  Your help/comments would be very appreciated.
  
  REDA

  go to the report attributes, Edit Column ("Select" column) change the view regarding "* Standard report column."

• Need help with weird BACK button

  Hi, I'm doing a Flash banner online.  My employer needs a tag click on put in but also wants a replay button that will go to frame 1 and replay the animation (I already have a stop on the last frame action).  I'm using Actionscript 2 btw (I must according to the instructions of the employer). What I did for the link button that requires the click tag, I created a box about the size of the entire banner, drew another small box on top of it that is directly above hence is the play button, then I deleted the smaller box, creating a hole in the largest area where is BACK button.  I then did the big box a button, dragged the high State to the State of positioning, then back on the stage 1 following required, click tag, I added:

  (release)

  {
  If (clickTAG.substr (0, 5) == "http:")
  {getURL (clickTAG, "_blank");

  } / / end if

  }

  It's par for the course on how to get banners here (like make a button the size of the ad and adding the click tag to it, but I did not yet a BACK button). Then I created a small oval in the hole where the big button was, it's a button, put "Replay" on it, then return to scene 1 added the following code:

  {We (reslease)}
  gotoAndPlay (1);
  }

  But when I go to the banner, the replay button does not work and I get the following errors for the 3 lines of code:

  Specified invalid mouse event. Statement must appear in the Manager

  And did you really use this code (spelling and syntax errors):

  {We (reslease)}
  gotoAndPlay (1);
  }

  It should be:

  {We (Release)}
  gotoAndPlay (1);
  }

• Need help to connect the buttons inside a movieclip

  Hello

  I have five mcButtons inside a movieclip. I want to, so if the user clicks on the 1 mcButton it won't Stop on frame 2. I want then the other four mcButtons that were not clicked to stop on frame 2. Can't do the second part of this work. my code is below. Any help would be greatly appreciated.

  Thanks in advance

  prev08.Btn1.ID = 0;

  prev08.btn2.id = 1;

  prev08.btn3.id = 2;

  prev08.btn4.id = 3;

  prev08.btn5.id = 4;

  prev08.btn1.addEventListener (MouseEvent.CLICK, getXML08)

  prev08.btn2.addEventListener (MouseEvent.CLICK, getXML08)

  prev08.btn3.addEventListener (MouseEvent.CLICK, getXML08)

  prev08.btn4.addEventListener (MouseEvent.CLICK, getXML08)

  prev08.btn5.addEventListener (MouseEvent.CLICK, getXML08)

  function getXML08(event:MouseEvent):void

  {

  for (var i: int = 0; i < 18; i ++)

  {

  if(i == Event.Target.ID)

  {

  event.target.gotoAndStop (2)

  }

  on the other

  {

  prev08.getChildAt [i] .gotoAndStop (1)

  }

  }

  they all go to the same frame?  that makes no sense.

  If you want to run each in their own framework 1, except just clicked the button that should go to its Framework 2, direct all frame them 1 followed by the evt.currentTarget goes to frame 2:

  function getXML08(e:MouseEvent) {}

  for (var i: int = 1; i<>

  prev08 ["BNT" + i] .gotoAndStop (1);

  }

  MovieClip (e.currentTarget) .gotoAndStop (2);

  }

• Need help using the Back button

  Is there a way to make the BB built to the "back" button go to the index.html screen and not just the last. I remember well seen this somewhere, but I've searched and searched and cannot find anywhere.
  Thank you.

  blackberry.system.event.onHardwareKey(blackberry.system.event.KEY_BACK,
      function() {
     window.parent.location.href='index.html';
     return false;
  });
  

  and in the config.xml file:

• created by the script of a radio button. Need help on the Cancel button.

  Hello

  After you run this script, when I choose German, french or button of Italy and clicked on Cancel button, then window should be closed but it shows for example to alert respective 'German clicked u. "

  Thank you

  Marie rosine

  var win = new window ('dialog');

  win.alignChildren = 'left ';

  victory. German = win.add ('radiobutton', defined, 'German');

  victory. French = win.add ('radiobutton', defined, 'French');

  victory. Italy = win.add ('radiobutton', undefined, 'Italy');

  win.cancelBtn = win.add ("button", undefined, "Cancel");

  win.quitBtn = win.add ("button", undefined, "Ok");

  win.defaultElement = win.quitBtn;

  win.cancelElement = win.cancelBtn;

  victory. German.Value = true;

  win.quitBtn.onClick = function() {}

  end = 1;

  Win.Close ();

  }

  win.cancelBtn.onClick = function() {}

  end = 1;

  Win.Close ();

  }

  Win.Show ();

  If (win. German.Value is true)

  {

  Alert ('German clicked u')

  };

  If (win. French.Value is true)

  {

  Alert ('clicked u French')

  };

  If (win. Italy.Value is true)

  {

  Alert ('clicked u Italy')

  };

  var win = new Window ("dialog");
  win.alignChildren = "left";
  win.German = win.add ("radiobutton", undefined, "German");
  win.French = win.add ("radiobutton", undefined, "French");
  win.Italy = win.add ("radiobutton", undefined, "Italy");
  win.cancelBtn = win.add("button", undefined, "Cancel");
  win.quitBtn = win.add("button", undefined, "OK");
  win.defaultElement = win.quitBtn;
  win.cancelElement = win.cancelBtn;
  if (win.show() == 1){
   if (win.German.value == true)
   {
    alert ("u clicked German")
   };
   if (win.French.value == true)
   {
    alert ("u clicked French")
   };
   if (win.Italy.value == true)
   {
    alert ("u clicked Italy")
   };
  }
  

• Need help with the button mute on my helmet XL-3000 of Microsoft Chat, please!

  Hi all!  Hope everyone is having a good TGIF!  If you use my helmet even, I need help understanding the region button mute in the middle of the rope.  The red light is on or off?  I suppose that if I hit the curve button with the microphone on this subject, and the red light, I'm turn off my mike?

  I did some tests with others on the phone calls.  Sometimes, some other hear me, sometimes they do not have.  BUT I NEVER HEAR THEM!  FOR MY WORK, IT IS IMPERATIVE THAT I MAKE CALLS TO OTHERS!  HELP PLZ!  Thank you very much and have a great wkend!

  Hello
   
  Please follow the links below to troubleshoot the computer.
   
  Method 1
   
  Connect one microphone, music player or other audio device to your computer
  
  http://Windows.Microsoft.com/en-us/Windows7/connect-a-microphone-music-player-or-other-audio-device-to-your-computer
  
  Method 2
  
  Step 1
  
  Troubleshooting: headsets
  
  http://www.Microsoft.com/hardware/en-us/help/support/troubleshooting/headset/microphone-issues
  
  Step 2
  
  Open the troubleshooting of Audio recording
  
  http://Windows.Microsoft.com/en-us/Windows7/open-the-recording-audio-Troubleshooter
  
  Method 3
  
  How to adjust the microphone volume
  
  a. click Start, type mmsys.cpl in the search box and press ENTER.
  b. in the sound dialog box, click the recording tab.
  c. click Microphone, and then click Properties.
  Note Make sure that the work appears under Microphone. If the job does not appear, click Microphone, and then click on set as default.
  d. the Microphone Properties dialog box, click the custom tab.
  e. select or clear the box amp Microphone.
  f. click the levels tab.
  g. set the volume to the desired level, and then click OK.
  h. click OK to close the sound dialog box.
   
  How to adjust the setting of the voice
   
  a. start the game.
  b. connect to LIVE (the Guide).
  c. click personal settings.
  d. click on voice.
  e. make sure that the recording volume level indicator records at a bar when you talk.
  f. click done.

  If you are still facing problems then, I would say that you contact support for Microsoft hardware for more direct intervention.

  http://www.Microsoft.com/hardware/en-us/support

  
  I hope this helps.
  
   

• Need help with buttons!

  Hello someone!
  
  The thing that I would need help with is the buttons that moves... Say there are 2 buttons on the stage, when someone clicks the button, the button from left to right movement and opens something when it stops there. So long it's fine for me, but now the peal problem.
  
  The thing is I want the button now on the right rear to place there where appropriate when I click on a button of the second (and it goes right to the place). When I do now the first button remains in place right... Do someone know what to type in Actionscript?
  
  Please help me... [email protected]

  what you use now which causes your keys for you move?

• every time I have a video on youtube, if I switch to full screen, have stamped all over again. any video's. need help

  I watch a video in youtube innormal screen (small), but when I go fullscreen, there stamped all over again. need help

  This is because when you switch to full-screen, youtube will switch to a higher resolution and low resolution buffer releases. It has nothing to do with Firefox. See this article for possible solutions: http://www.gtricks.com/youtube-tricks/full-screen-deletes-buffer-maximizing-problem/