Need help on how to fix this 0x800106ba.
IMesh due to a virus. Windows Defender will not work. Told to uninstall and reinstall. Typed in apwiz.cpl, but the Defender isn't here for me to uninstall. Need help please.
Hello
Defender is part of the vista operating system
You cannot uninstall or reinstall
read this information
· If you use microsoft security essentials avg avira mcafee norton etc they disable the vista version of windows defender by default
the basics of Microsoft security has its own version of windows defender
and other anti-virus programs use their own particular type of application to scan for spyware and malware
It of nothing to worry and is the default action, which is designed for them to do
If the above does not apply to your machine to read the information on the below link on how to disable the windows defender service in vista or make an autostart to enable
and here is the method to remove it from startup in vista
http://www.groovypost.com/HOWTO/Microsoft/Vista/remove-Windows-Defender-from-Vista-system-startup/
and this is how you would normally activate or disable windows defender in vista from within defenders of own and options tools
http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-for-Microsoft-Vista/
you would like to read this information on the malicious software removal
Download update and scan with the free version of malwarebytes anti-malware
http://www.Malwarebytes.org/MBAM.php
You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes
http://www.bleepingcomputer.com/download/anti-virus/rkill
If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
- Select the Safe Mode with networking with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
Tags: Windows
Similar Questions
-
errorcode00000663 will not update, I need help on how to fix
error code 00000663 how remedy
Hi Thomas Williams,.
You have problems with a single update or Windows updates all?
Please follow the steps below and check if it helps.
Step 1:
See the update history for the error failed.
See the updates of Windows are installed - Vista
Step 2:
Try to reset the Windows Update components and then try to install the update. See the article below mentioned the same thing.
How to reset the Windows Update components?
For more information, please visit the following links.
Problems with installing updates - Vista
Aziz Nadeem - Microsoft Support
[If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]
-
I lost my creative cloud icon. So I went to CC Desktop Uninstaller, uninstalled then trashed Adobe Application Manager. I then reinstalled Adobe Manager. Now, I get an error message (A12E5). How can I fix? IM using Mac El Capitan 10.11.2
Thanks, Deb
I just uninstall all creative Cloud apps then reinstalled. Everything seems to work fine now.
Thank you for everything that you have entered.
-
I was entering numbers in a chart in Pages to update the information and all of a sudden the cells do not have the formatting that I want. It's changing the way numbers which I type them, and I don't know why or what to do?
Hi Slf@LF,
Numbers and pages are trying to be smart and recognize wht kind of data that you enter. If you enter something that resembles a date they will treat it as such. Some people have problems with serial numbers because programs to format their numbers and not text.
View the data that you are trying to enter and how it's changed and we ca probably to understand what is happening to her.
Quinn
-
The driver is the problem, and the Message says that the pilot had not, but he recovered and that's all he set up and I can't click on the Message for more information because he Disappaer out of the taskbar and the game just guard shot me. And I don't know what to do to solve the problem. I don't know if I need a better video card or if my license is the main problem?
Or the other of your machines use Intel's integrated graphics? If so, maybe that's the problem. Sims 2 would do the same for users with these types of graphics cards.
-
DROP TABLE TWO.
DROP TABLE ONE;
CREATE TABLE 'A
(
ACTIVATE THE 'ID' NUMBER NOT NULL,
ACTIVATE THE "SERIAL" VARCHAR2 (10 BYTE) NOT NULL,
ACTIVATE THE "FIRST NAME" VARCHAR2 (30 BYTE) NOT NULL,
ENABLE 'PK_ONE' CONSTRAINT PRIMARY KEY ('ID', "SERIAL")
)
TABLESPACE 'USERS ';
CREATE TABLE "TWO"
(
ACTIVATE THE 'ID' NUMBER NOT NULL,
ACTIVATE THE "SERIAL" VARCHAR2 (5 BYTE) NOT NULL,
ACTIVATE THE "DEGREE_CODE" VARCHAR2 (10 BYTE) NOT NULL,
'TEST_NAME' VARCHAR2 (20 BYTE),
ACTIVATE THE KEY PRIMARY CONSTRAINT 'PK_TWO' ('ID', 'SERIAL'),
"FK_TWO' FOREIGN KEY ('ID', 'DEGREE_CODE') CONSTRAINT REFERS TO 'ONE' ('ID', 'SERIAL') MAYBE DEFERRED ENABLE
)
TABLESPACE 'USERS ';
If we use the above sql scripts to create the tables and create the ADF BC using the above 2 tables, all 4 columns in table 2 are reported as the primary key.
User, tell us your version of Jdev, please!
You should file an SR with support.oracle.com for this.
As a work around you can change the area of occurrence, and remove the check mark key pirmary on the unwanted columns. After that, it should work.
Timo
-
Sony Bravia KDL - 32S 2000 turns randomly walk after 45 minutes of use, how to fix this?
I need to know how to fix this TV Sony Bravia KDL - 32S 2000, which works perfectly for the first 45 minutes and then stops and the new, as game of musical chairs, without delay be off or on, somes every 20 minutes sometimes a Seleman half minutes past before she goes out, stays out back, remains on several occasions. What setting do? Or part replace to fix this problem?
could be several things, if there is updated firmware starts here, make sure that there are enough ventalation flowing on tv also. IF all else fails, I would have a tech visit.
-
How to fix this error "generic host process for win32 services has encountered a problem and needs to close ' help me please I am using windows xp with SP3.
When I close this error or click on send or do not send, my session network remote also network mapped drive United Nations accessible then I restart my computer and I can access my network grows but after awhile once again this error and the same network behavior that I discussed earlier.someone has a better solution that take care of this problem.Hello
Given that the problem is related to the server of the IRIS, IRIS Contact support for assistance:
http://www.IRISLink.com/C2-1967-189/I-R-I-S---technical-support.aspx
Hope the above information is helpful.
-
An error occurred while the suspension the 2012 Windows R2 VMS on ESX 5.1 update 1 and ESXi5.0 Udpate3. Can someone help me what is the reason for that and how to fix this?
This issue has been resolved with the article below
-
I have the latest version of Norton Internet Security on a windows 8.1. Firefox version 36.0 works very well. Version 36.0.1 is blocked by Norton. I have reset the firewall instructions of Norton, but that did not help. I started Firefox worm 36.0 but whenever I restart the computer, Firefox updates and I'm back to square one. Does anyone know how to fix this?
https://support.Mozilla.org/en-us/questions/1048938
Firefox takes two more minutes to load, the apparent clash with Norton Internet SecurityNorton showed where things Autoprotect exclude them
Open Norton administrative settings. Under performance, monitoring
find program Exclusions. To his right-wing press, the configures + link.You will need to add each program one at a time from Mozilla Firefox
Mozilla maintenance service< Windows > folders and... -
my computer is the signature with a temporary profile and I can't access any of my files how to fix this?
Hello
Please post in the forums for your version of Windows.
Ask a question in a select Technical Forum here appropriate injector:
Microsoft Community - Forums
http://answers.Microsoft.com/en-usPlease provide all the information we need to help us help you.
How to ask a question
http://support.Microsoft.com/kb/555375=================================
These methods should help for Windows 7 or Vista.
References to Vista also apply to Windows 7.
You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. THE ADMIN
Safe Mode account has no default password (so unless someone changed
the password should be available).Some programs such as the Google Updater (if you've added the Google toolbar,
Chrome or Google Earth) has been known to cause this problem.Error message when you log on to a Windows Vista-based or Windows 7
computer by using a temporary profile: "the user profile Service has no logon.
Unable to load the user profile.
http://support.Microsoft.com/kb/947215Difficulty "the user profile Service has no logon. User profile cannot be loaded. "Error in Windows 7
http://www.SevenForums.com/tutorials/186131-user-profile-service-failed-logon-user-profile-cannot-loaded.htmlHow to fix error "the user profile Service has no logon. Could not load user profile. "in
Vista & Windows 7.
http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.htmlHow to fix error "your user profile was not loaded correctly! You have been connected with a
temporary profile. "in Vista & Windows 7.
http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.htmlBE VERY CAREFUL IF YOU USE THIS ONE:
DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.
----------------------------------------------------------------------------------------------------------
For Windows 7:
http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.htmlUse the hidden administrator account to lower your user account APPLY / OK then
Raise it to ADMIN. This allows clear of corruption. Do the same for other accounts
If necessary after following the above message.You can use the hidden - administrator account to make another account as an ADMINISTRATOR with
your password even (or two with the same password) use a test or difficulty to another.You can run the command Admin account hidden from the command prompt
from there if necessary.How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
http://www.SevenForums.com/tutorials/668-system-recovery-options.htmlWhat are the system recovery options in Windows 7?
http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7How to create a Windows 7 - free methods system repair disc
http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html----------------------------------------------------------------------------------------------------------
For Vista:
How to enable or disable the real built-in Administrator account in Vista
http://www.Vistax64.com/tutorials/67567-administrator-account.htmlUse the hidden administrator account to lower your user account APPLY / OK then
Raise it to ADMIN. This allows clear of corruption. Do the same for other accounts
If necessary after following the above message.You can use the hidden - administrator account to make another account as an ADMINISTRATOR with
your password even (or two with the same password) use a test or difficulty to another.You can run the command Admin account hidden from the command prompt
from there if necessary.This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxWhat are the system recovery options in Windows Vista?
http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-VistaHow to create a Vista - free methods recovery disk
http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html---------------------------------------------------------------------------------------------------------
If you can't access your old account you can still use an Admin to migrate to one
new (remember to always leave an account Admin who is not used except)
to test and difficulty).Difficulty to a Vista - corrupted user profile
http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profileDifficulty to a corrupt user - Windows 7 profile
http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profileI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
calendar of the prints beyond the dates requested printing - how to fix this?
calendar of the prints beyond the dates requested printing - how to fix this? Because that's the impression beyond the date of my request she also shows not all of my regular appointments for each date.
Hi Sherrie,
Thanks for posting your question in the Microsoft Community.
Of the information, you are facing problems to print issues with the calendar.
It would be useful that you could answer this question to help you further.
1. what calendar you want to print?
2. This occurs when you print by using a calendar of specific application?
3. are you able to print other documents without any problems?
4. have you made a recent software or hardware changes to the system?
Please provide us with more information on the issue, so that we can help you solve the problem.
Suggestions for a question on the help forums
If you need further assistance, please answer and we will be happy to help you.
-
Windows service install could not be consulted how to fix this?
Windows service install could not be consulted how to fix this?
Hi raptor05
What exactly happens when you try to install a program that needs this service?
Try these steps and see if it helps you:
Unregister and re-register Windows Installer.
To do this, follow these steps:
1. click on start and then click Run.
2. in the Open box, type msiexec /unreg and then press ENTER.
3. click on start and then click Run.
4. in the Open box, type msiexec/regserver, and then press ENTER.NOTE: you must log in using the administrator account and try to install it like that. Or you can also try running the program by right clicking and select "run as Administrator". It should work.
We need to install the latest version of Windows Installer that is 4.5, the link to it is:
After back and let us know if it helped to solve your problem.
Thank you and best regards,
R uma - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
What is blue screen and what to do and how to fix this with out taking back to factory setting and reinstalling Vista
When a BSOD (Blue Screen of Death) the system failure occurs, for most users, there not enough time to fully record what he says. the exact text is important for anyone trying to diagnose what is wrong. You can save time when the error occurs then by following the procedure described below.
If you already did it disable the auto reboot system error. This should help by allowing the time to write the code to Stop error and related information correctly. Select Start, do a right-click on computer select Properties, advanced, system settings startup and recovery, system failure and uncheck the box before automatically restarting. Re-do not enable automatic restart in the event of system failure after obtaining this information, this setting is the best left to not allow an automatic restart.
If the failure occurs during the initialization of the computer, you need to try a different approach. You can access the Advanced Options Menu of Windows on multiple computers by constantly pressing the F8 (key) key when starting and selecting the option - disable automatic restart in case of system error. This method is not always easy to use because it may be difficult to press the F8 key at the right time. Try again if it doesn't work the first time. On some computers, a different key must be used.
Send a copy of your dumpfile as a shared file on your disc of sky with a link here.
http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65 -
Adobe Application Manager is corrupt and allows a reinstallation try Fail Adobe Acrobat Pro XI - try to install the new copy of the AAM fails because the AAM is missing according to dump record installation - how to fix this chicken in the egg problem?
06/04/16 16:23:29:507. [INFO] | | USS | PIM | PIM | | | 6256 | Build Version - 9.0.0.244
06/04/16 16:23:29:507. [INFO] | | USS | PIM | PIM | | | 6256 | Exploitation forest verbosity level set to 4
06/04/16 16:23:29:507. [INFO] | | USS | PIM | PIM | | | 6256 | CREATING Instance PIM...
06/04/16 16:23:29:507. [FATAL] | | USS | PIM | PIM | | | 6256 | Detected db journal file, Adobe Application Manager is in a State damaged to C:\Program Files (x 86) \Common Files\Adobe\OOBE\PDApp
06/04/16 16:23:29:507. [FATAL] | | USS | PIM | PIM | | | 6256 | Adobe Application Manager is needed to solve this problem. However, it is missing or damaged.
Download a new copy of Adobe Application Manager of http://www.Adobe.com ,
or re install this product.
06/04/16 16:23:29:507. [FATAL] | | USS | The installation program. The installation program. | | 6256 | Cannot create the PIM item
06/04/16 16:23:29:507. [INFO] | | USS | The installation program. | | | 6256 | Event generated Guid is: "986b04a2-3099-49fd-9067-df69c36ff2b2."
06/04/16 16:23:29:507. [INFO] | | USS | The installation program. | | | 6256 | Event generated Guid is: "e5f02581-649c-49ec-a265-800eeb5ad426."
Does anyone have an idea what to do? I use Windows 7 as operating system
Hi Ruedigerd91465945,
Well try download and install Adobe Application manager from here: Adobe - Adobe Application Manager: For Windows: Adobe Application Manager: thank you
Before installing kindly, restart the machine and then rename the folder in C:\Program Files (x 86) OOBE \Common Files\Adobe\OOBE\PDApp as OOBE_OLD
Let us know if that helps.
Maybe you are looking for
-
I backed up my firefox bookmars and the file that came out is not specific file type. Even in the properties, he said only: "file type: file. So now I'm trying to restore my favorites, but I can't open this file. If I try to open the file itself with
-
Satellite L305-S5919 - downgrade from Vista to XP
Hey everybody Faizan my names and my problem is that I want to go down to XP cause I don't like vista at all I know all the steps to downgrade to xp as to change the bios to compatibility, but there is only one problem I just need an insurance to som
-
Classic FM radio for blackBerry
I read somewhere that Classic comes with FM Radio, but I don't see the app. Is to be installed at world of BB app, if yes, please give the link.
-
ADF table horizontal scrolling
I have the table with the columns I need to insert in some pixels more than 30. How can I do this? Here is the code I have, but it extends beyond the visible with a horizontal scrollbar at the bottom of the screen that's not what I'm looking for.< af
-
HP Pavilion a6552f Desktop will not start - almost tried everything
I have no idea of what happened, I wasn't home when this thing is dead. When I left the machine was not anything... I had a 2.5 drive "in a case connected to the usb with usb power. I was told that my diet was probably too short for my video card, bu