Need help on javascript for autofill boxes based on a numeric value.
I have a numeric field that I would have 1 - box
five autofilled based on a numeric value.
For example, the numeric value is TotalPoints
If the value of TotalPoints is > 10 fill this box
If the value of TotalPoints is 10-19 autofill this checkbox
If the value of TotalPoints is 20-49 autofill this checkbox
If the value of TotalPoints is 50 to 69 autofill this checkbox
If the value of TotalPoints is 70 + fill this box
Help in writing the correct script for this would be greatly appreciated.
The following script works for me. Notice the addition of the declaration of resetForm, I would have understood before.
Custom text field validation script
(function () {}
Get the value of this field as a number
var val = + event.value;
resetForm (["AssetClass"]);
If (val > = 70) {}
getField("AssetClass.0").value = 1;
return;
}
If (val > = 50) {}
getField("AssetClass.1").value = 2;
return;
}
If (val > = 20) {}
getField("AssetClass.2").value = 3;
return;
}
If (val > = 10) {}
getField("AssetClass.3").value = 4;
return;
}
//<>
getField("AssetClass.4").value = 5;
})();
Edit: Yes, place the code in the text field Validate event is correct.
Tags: Acrobat
Similar Questions
-
Need help with Javascript for Acrobat 9 Pro
Hello
I have created a PDF form in Adobe Acrobat 9 of Profession. Not having not much experience with Javascript, I found this forum very helpful and have many examples of script used to other issues, I had. I was hoping that someone could help me with the following script, I tried many variations, cannot operate.
var ratio = this.getField("ratio").value
concentration of var = this.getField("concentration").value
var result = this.getField("result").value
If (ratio.value > = 50.00)
{result.value = 'PASS' ;}
If (ratio.value".value > = 40.00)
{result.value = 'PASS' ;}
If ((concentration.value ==61) & & (ratio.value > = 49,25))
{result.value = 'PASS' ;}
If ((concentration.value ==61) & & (ratio.value > = 39.25))
{result.value = 'PASS' ;}
If ((concentration.value ==62) & & (ratio.value > = 48.50))
{result.value = 'PASS' ;}
If ((concentration.value ==62) & & (ratio.value > = 38.50))
{result.value = 'PASS' ;}
on the other
{result.value = "FAIL" ;}It's just a piece of code, concentration values run from 61 to 99 and the value of the ratio varies for each value of the concentration, there is a high ratio and a low ratio. The result of this field to complete the field of results with a SUCCESS or a FAILURE. This isn't working... any help is greatly appreciated!
If this script is attached to the Calculate of the "result" field event, if I understand correctly the logicm code should be something like:
// Get a reference to the ratio field var ratio = this.getField("ratio"); // Get a reference to the concentration field var concentration = this.getField("concentration"); // Default var res = "FAIL"; if (ratio.value >= 40.00) { res = 'PASS'; } if ((concentration.value == 61) && (ratio.value >= 39.25)) { res = 'PASS'; } if ((concentration.value == 62) && (ratio.value >= 38.50)) { res ='PASS'; } // Set this field's value event.value = res;
If the code is placed elsewhere, you must indicate the location.
-
Adobe muse work on a menu lighbox and need help I can not the box of active relaxation, even if I checked trigger on top anyone with a suggestion?
Thank you, it ends up being a superposition problem, thank you, but I can see where an invisible element could be a problem too. I use to select it all the trick to understand where I've been in Illustrator all time years ago I am so new Muse that I kept thinking can be as simple as I can go back to things I've done in other Adobe programs, but it is! and I'm an old school Print Designer who doesn't REALLY know the thing no coding thank once again
-
Need help with coding for HTML5 with emergency Flash video
Hello, need help with my coding in Dreamweaver CS5.5 for HTML5 with emergency Flash video. Not sure if the coding is correct. Do I need any other JavaScript etc.?
Another thing is that you don't have to include SWF as aid manual if you provide all 3 ogv, webm & mp4 video formats as one of these formats will certainly be played in any browser that is fully compatible HTML5.
Still one thing you could do if you don't mind hosting your video on Youtube is to get an embed code for Youtube - in this way, you don't have to convert all the files. YouTube will do it for you and it will play on devices of HTML5 as well as supports Flash player of relief for devices that cannot play HTML5.
-
Need help with divers for ASUS Intel Socket 775 Motherboard,
Need help to locate drivers for this motherboard, my external USB hard drives do work not be recognized, no drvers for SM Bus controller, link controller SATA Silicon Image Sil 31 or 32,.
To help you to download the drivers for your computer, you can check out the link below. You can also contact the Asus Support using the link below.
http://support.ASUS.com/download/download.aspx?SLanguage=en-us XD
-
Need help finding drivers for W7 for HP Pavilion a6220n
I plan to upgrade my HP Pavilion a6220n Vista 32 bit to Windows 7 Home Premium 64 bit.
I need help to find the drivers for W7. When I go to HP driver download page and select the OS W7 since the menu drop-down it does list all the drivers, could someone provide me a link where I can find all the drivers W7 please?
I heard that we can use Vista to W7 drivers, is it possible?
Any help would be greatly appreciated.
Hello:
Yes, you can use the drivers Vista for your PC, and it should work fine.
After have connected you to the internet, windows update will download all drivers windows 7 that may be more current than the vista ones.
DO NOT under any circumstances to Flash BIOS after installing Windows 7, or you may damage your PC most likely permanently (as in kill him).
If you find that you need to update the BIOS, do so now with Vista installed.
Paul
-
Need help finding parts for upgrading pc?
Hi I want to upgrade my pc and I know this is old, but I need help to find parts I want to improve everyting.
Here is my pc (hp media center m7260.se desktop pc units). Please I need help.
Yes, this processor will work with the material. "But the opinion States: currently, item can be shipped only within the United States.
Did you read the links (information and motherboard) that lasvegaswireman posted for you?
Micro-ATX: 24.4 cm X 24.4 cm
Buy a new motherboard will automatically end the use of the current operating system (ie the XP OS).
-
Hi need help of mixture for dissemination, Adtoox Norway
Have little experience sound mixing, and need help in the right understanding of these specs:
PPM peak value
+ 4.0 dBu (-14,0 dBFS) PEAK of Maximum sampling -7.0 dBFS Leq loudness Must be of-22,0 to-17,5 dBFS How I understand it, is that the global PB should be under - 14, but there could be a peak of-7?
Thank you
PPM peak value
+ 4.0 dBu (-14,0 dBFS) PEAK of Maximum sampling -7.0 dBFS Leq loudness Must be of-22,0 to-17,5 dBFS How I understand it, is that the global PB should be under - 14, but there could be a peak of-7?
It's a slightly unusual specification has been given to you here! Unfortunately there is no simple explanation of-figure Leq is a weighted equivalent volume level and does not have "peaks" as such at all. In addition, strict, there must be a period of time attached to it, but I think that they have renounced it and said that it applies only to the total duration of your program. What would be more useful would have been loudness ITU specification - R (1770-2 BS) indicated in LUFS - hearing can measure this directly.
Anyway, all this is a bunch of total uselessness. The idea is that the sound levels of the program should be kept within limits determined that people must keep setting levels of volume on their televisions or radios. Guess what? It does not work! Even with the broadcasters who respect carefully the specifications - such as the BBC - you always get big enough to be irritating variations. They do it for me every Monday evening on BBC2, for example...
But this isn't just a mouth shot - the most useful thing I can do is give you a link to the BBC document that explains this as clearly as possible. If there are parts that you still don't understand, go back and ask.
-
Need help with javascript used to check the data in the mandatory radio button fields
required_fields
I get a syntax error (SyntaxError: missing: after the id property 17; at line 18). I am trying to run a script to verify data in all the fields required radio button before letting the user to submit the form (or save). Here is the code I use:
var AllRequiredFieldsSet = true;
for (var i = 0; I < this.numFields;i++)//loop through all form fields)
{
var fldName = this.getNthFieldName;
var currentFld = this.getField (fldName);
if(currentFld.type=="radio")
{
All the radios that are needed to see if the user filled their
if(currentFld.Value=="OFF")
AllRequiredFieldsSet = false; one of the option boxes has not been selected, this form cannot be sent
}
}
If (AllRequiredFieldsSet is false)
App.Alert ("all the required areas have not been met");
on the other
this.submitForm ({cURL"mailto:EMAILADDRESS@gmail.com", cSubmitAs: "PDF"});
Miss me not all media... Any ideas on what I'm missing?
Thank you! Judy
These two lines should fix things:
var fldName = this.getNthFieldName (i);
...
if(currentFld.type=="RadioButton")
-
Need help with license for Windows store
Hello! I have problem with Windows store, he says he has a problem with the license.
It happened because I tried to upgrade my Windows 8.1 to Windows 10 and I've failed at about 20 times. Servers of M$ have been save this issue but they have not registered my fails so now servers $ M think I use illegal license for my laptop. My laptop is Asus F55A and I can not use the store because M$ servers does not allow me too.
Please Microsoft something about it.i have legal Windows but probably your servers register this as illegal because I repeatedly upgrading to windows 10 who never worked and your servers did not know my fails.
Please answer.
Error with Windows store code "this application failed to start because of a problem with its license. Please try again later.
Any help will be for me!
Hello
Thanks for posting your query on the Microsoft Community.
According to the description, I understand that you are facing problems with Windows.
I suggest you to refer to the suggestions of B Abid replied on 29 October 2012 and check if that helps.
Hope that the information provided is useful. Let us know if you have questions related to Windows, we will be happy to help you.
-
I can't find a certain number of support the customer to solve this problem.
You can contact the Support from Adobe using link below:
[Click on always need help button and select the Chat option]
-
Conditional display in the text box based on the calculated value
Hello
I have radio buttons that each have a numerical value. For example = 1 A = 2 C = 0. In the example below, the total is equal to 5.
The sum is displayed at the bottom of the document and is passed to another text box:
Instead of '5' displayed in the text box on the right, it should display a "Control" Word like this:
The displayed word is based on the totals through this range:
1-2 = 'absorbing '.
3-4 = 'practitioner '.
5 to 6 = "control".
The script I used to pass the value from the left to the right text box in the chart above is:
name of the field to text box;
var cTextBox = 'Cabinet Talent strategy knowledge - total';
get the value of the field with the name in cTextBox;
var sTextBox = this.getField ("cTextBox") .value;
Set the value of this field;
Event.Value = sTextBox;
That I need to add to this script to show one of the words, such as "control" above?
I am a complete novice to scripting. I found the above script online and somehow got it to work.
I thank very much for any help or pointers, you can provide.
Best regards
Sorry, there were some errors in the code that I provided above. Try this:
If (sTextBox > = 1 & sTextBox)<= 2)="">=>
Event.Value = "absorbing";
} ElseIf (sTextBox > = 3 & sTextBox)<= 4)="">=>
Event.Value = "practitioner";
} ElseIf (sTextBox > = 5 & sTextBox)<= 6)="">=>
Event.Value = "master";
} else {}
Event.Value = "";
}
If it still does not respond, you can send me the file at [email protected] and I'll check...
-
Hello fellow Adobe users,.I'm trying to find a way to see the numerical value of average and presents its equivalent word. Rather than display the number, it should show the following:
A numeric score from 3.1 to 4 should show as pending
A digital index of 2.1 to 3 should show meets expectations
A numeric score from 1.5 to 2 should show as below performance
A rating of 1 to 1.4 should show as failure
Should what simple javascript I type the javascript custom in the text field properties?
Looking forward to your comments.
Thanks in advance!
Jonathan
You have a field that is the calculation of this average in number? Let's say you do and it's called 'average '. You can then use this code as the custom for the field "Average in the words:" calculation script
event.value = ""; var a = +this.getField("Average").value; if (a>=1 && a<=1.4) event.value = "Fail"; else if (a>=1.5 && a<=2) event.value = "below performance"; else if (a>=2.1 && a<=3) event.value = "Meeting Expectations"; else if (a>=3.1 && a<=4) event.value = "Outstanding";
-
Need help with JavaScript button to save as an event.
Hello
I use Adobe Acrobat X Pro and am totally new to scripting of forms in Adobe (completely new to Adobe Acrobat as well!). There is a backup on a form button that opens the Save dialog box under using a trigger (the mouse upward) and action (execute a menu item - file > save under... > PDF...) and it works fine, however, I want to now use javascript to change the behavior of the button so that it uses a trigger (the mouse upward) and action (run a JavaScript script) , and I want that JavaScript to combine the text values in two form fields (a location drop down and a date text field) and use this string concateneated + ".pdf" as the file name when he opens the Save as dialog box. Make sense?
This is what I added to the button as a JavaScript so far I use a test at this time string ("NewFile.pdf") and add the string that is concatenated to the script after that I know that the script works as it should.
var NouveauNomFichier = "NewFile.pdf";
var pathArray = this.path.split("/"); "
pathArray.pop ();
pathArray.push (newFileName);
this.saveAs(pathArray.join("/")); "
Up to present two questions:
1. when I click the button nothing happens, no dialog Save as or whatever it is.
2 when I check the properties of the button depending on the Actions tab shows property to select Action "Performing a menu item", even if I chose previously 'run a JavaScript '.
Thanks for any help!
The saveAs method will not work if the code is placed in a key event. It would need to be in a JavaScript file to the folder level, inside a function of confidence, inside a block of app.beginPriv/app.endPriv. Each user must have the JavaScript file to the folder level. The button can then call the code in the file. It will be possible for users of the form?
-
Need help in order for recovery of my Satellite L450 - 16Q
My laptop had a virus so I used the product recovery disc that came with it, thinking that he'll fix it but he eventually forgave all of my computer even windows 7.
So now that I have a computer that I can't use it, I bought windows 7 directly from microsoft that I downloaded and tried to install it but it does not work.
I also bought the product of disks in the backup media on toshiba site recovery in the hope that they will work.Can anyone help/advise on what I should do.
Thank you
SharronHello
The whole story is a bit confusing for me. So lets see what you wrote:
>... thinking that he'll fix it but he eventually forgave all of my computer even windows 7.
The thought does not. What you need is accurate information about the installation of recovery and that are in the user s manuals document recovery disk is not like Microsoft installation disk and cannot be used for the repair. Recovery disk contains the recovery image and can be used for any new installation OS (recovery image installation) only.
> So now I have a computer that I can not use
Why you can not use? Recovery image installation installs new OS. What operating system is installed after the execution of installation recovery image?
> I also bought the backup from toshiba support site product recovery disks
But why, if you already have recovery disk you used at the beginning of this whole thing?What you need to do is to use the original disc for installing the OS.
-Start your laptop and press F12 repeatedly to enter the BOOT menu
-When the menu put the recovery in ODD disk
-Select the CD/DVD drive in the menu and press ENTER
-Follow the on-screen menuAfter installation of recovery image you will have factory again and everything should be OK.
Any other questions?
Maybe you are looking for
-
Using Chrome. It was a business providing false identification information Adobe... telling me that I needed new Flash. It seemed legitimate. I succumbed and was immediately besieged by the Yahoo search engine. It is the address that I see first, alt
-
How to block a sender of email on my Macbook Pro?
I use msn.com to my email but I can't understand how to block a sender of email from my Mac Pro. Can someone guide me through it?
-
Movement of mouse Satellite A100-283, floating screen / mouse 'split '.
Suddenly the screen started nervously floating strongly different images. When I Park the mouse / cursor in a corner or the far sides of the screen, the heartbeat stops.When the cursor is parked in one of the corners of the screen, it appears "divide
-
Why does itunes import my video files?
Older versions of iTunes seen and synchronized them very well, so I upgraded to version 12 and now I can not re-import them. They were all formatted in mp4 format. I'm on a MacBook Pro. They will not work in iTunes on my Mac or Windows 10 PC.
-
My daughter has an air of ipad and iphone 6 mounted on a tripod. She would like to use his phone to photograph/video while you watch on his ipad (in real time)... is it possible? If so, what adapters or cables are needed?