Need help reverse alerts a receipt after her reconciled

Similar Questions

• Need help with alert

  Hi, maybe it's a very simple, but I'm a little stuck. I have a grid that is populated with data. I have a button change. What I have now is when I select an item in the grid and click the edit button to take me to another form to edit the selected data. What I want to do now is, IF I was not choosing anything from the data grid, I want an alert message or a pop-up message saying "I need to select an item in the grid or nothing is selected.". What should I do to achieve this. Any help will be much appreciated.
  
  E.g.
  *************MY GRID **************************
  < name cfgrid = query "Calls" = "searchGrid" >
  < name cfgridcolumn = "Id" header = "Id to call" / >
  < name cfgridcolumn = "Name" header = "Name" / >
  and so on...
  < / controls cfgrid >
  
  MY EDIT BUTTON *.
  < cfinput type = "button" onClick = "getUrl ("EditCall.cfm? [CallId ='+ searchGrid.dataProvider [searchGrid.selectedIndex] ['CallId'])] "name ="├editer"value ="├editer"/ >
  

  Too bad, I thought of it!

  my button, I did this:

  Thanx

• Need help with windows to open after windows xp3 attempted to upgrade

  I tried just update computer husband WinXP3. When I tried to reboot, the error "procedure entry point apsSearchInterface is not found in the liabrary of dynamic links Wlanapi.dll.  I searched the area of solution for the resolution and discovered that I need to update the driver of the dlink. So I downloaded the driver file on my computer, it has burned on a CD and now I need to go into Windows in safe mode, so I can install the driver.
  My computer starts not in any fashion without failure.  How to do back in Windows so I install the new driver?
  Safe mode tries to start, but it crashes on the drivers and I have to turn off the computer and try something else.

  Help!

  Debi

  How to remove Windows XP Service Pack 3 from your computer
  http://support.Microsoft.com/kb/950249 TaurArian [MVP] 2005-2010 - Update Services

• I need help restoring my sons computer after accidental compression by car please!

  Hello, I have problems with my son computer I turned it on and it says bootdsk compressed he said he used the cleaning disc and put a check mark in the compress file or box player's there to fix it without losing all its files?

  Hello

  Thanks for posting your query on the Microsoft Community.

  I would like to know some information.

  1. Are you able to start on the computer?

   

  I suggest refer you to the Microsoft Help Article below and check if that helps.

  http://Windows.Microsoft.com/en-us/Windows/repair-recovery-help#repair-recovery-help=Windows-7&V1H=win8tab1

   

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• Please need help reinstalling edition student nc6 after resetting my computers

  I have an adobe creative suite disc 6 design and web premium, the education edition. I recently reset my Mac computer to factory reset and now I'm not able to reinstall the nc6.  How to let adobe know I erased the previous installment, so I can reinstall again? I know that I only installed twice on the drive. I need to reinstall on my Mac book, moreover, this laptop has been set to factory reset also. Please help, I need to work on my nc6. Thank you

  Hello

  I would ask you to go there and download the product from the link below.

  and then you can install it using the serial number.

  Download Creative Suite 6 applications

  It will be useful.

  Concerning

  Maansee

• OK, need help on lists multi-level after all...

  Experts-

  I thought I found a solution to the numbering of the sets in a section, where the top-level step is number 1 after a heading. The test:

  1. Create a paragraph for the high-level steps style (as in a procedure step). I called the style level_2 (sic). It is based on the normal, with some indentation.
  2. Create a paragraph for the 2nd level stage (void) style. I called the style level_3 (sic). It is based on the normal, with some indentation.
  3. Create a multilevel list style, called MLL_style_1
  4. Associate level 2 paragraph style level_2 multilevel list style.
  5. Associate level 3 style list paragraph style level_3 at several levels.
  6. Associate the title 1 level 1 of the multilevel list style.

  The sole purpose of #6 above is to force styles Level_2 numbering is restarted. This seems to work:

  

  HOWEVER, I noticed a problem and a curiosity:

  • Problem: I don't want no numbering to appear before the header text 1. I can't find a way to make the numbering of level 1 of the MLL_style_1 property be nothing or null. When I delete all the text in space to change the Style, it reverts back to its default value < x >:

  

  So, do you have any ideas on how to do to remove the numbering of the heading, OR how to otherwise force the numbering of the first step to be 1.

  • Curiosity: The first element of heading 1 in the first picture above is the first occurrence of this paragraph style in the topic. However, it is auto-number 2. This seems to be due to the presence before the header of the paragraph styles that are associated with lower levels of the multilevel list.

  Any thoughts on why the first heading 1 start at 2?

  Much obliged in advance.

  OK, the question is 98% responded: for an explanation of the behavior of numbering, see the page of Mr. Jha here:

  http://blogs.Adobe.com/TECHCOMM/2009/11/multilevel_list_in_robohelp_8.html

  The last section (restart / continue numbering) explains how to restart list numbering in Mid-list.

  The 2% is the question of the first heading is numbered as 2 if there is no entry list. Support is to see if it is not a defect.

• Need help to reinstall the certificate after factory reset

  I have an ASA 5512 x race worm 9.1 AMPS Ver7.1 2 (3), I had to do a factory reset on the device and now when I use the anyconnect vpn wizzard and I'm trying to install the certificate on the device before the reset, I get the ERROR: failed to import PKCS12 operation.

  The old certificate has been generated by this device.

  How can I reinstall the old certificate?

  Thank you

  Scott

  You can, but you still need their intermediate certificate for the SAA can set up a chain of trust from the issued certificate (if it is initially issued or reissued)

• Need help for error on N3024 after the easy Setup Wizard

  I feel that I am a rookie mistake, but I can't figure out what I did wrong.  Any thoughts on how to solve this conflict IP error?

  Thanks, Matt

  

  Make sure that the OOB is connected to a management network that is isolated from the network in the Strip.  They should not go in the same network.

• Need help on creating a report after you set criteria

  Hello world
  
  I been through ebooks and had the idea of the apex.
  To give an example of what I want to do is I want to open up two areas of dates and selector of the report between the dates that have been defined in the selectors of dates
  These date picker field may be on the same page of the report, or they could be on another page. Once create button then the ratio between the dates that you define should appear
  
  Any thoughts?
  
  Thank you now

  Create a page with 2 parts...

  1st region would be of type html. Would have a series of selectors of dates, add validation to confirm that the TWO have selected values, and the departure date is less than OR equal to the date of end submit button to submit the page and generate the report.

  2nd region would be a region in relation to a selection with a where clause filtering on dates at the top clause. to visible region report only when the dates have a value.

  Thank you

  Tony Miller
  Webster, TX

  Never give up dreams!
  JMS

  If you answer this question, please mark the thread as closed and give points where won...

• I don't know what to do I need help

  How install Adobe character animator I installed the new version after effects CC 2015 I don't know what to do I need help

  To open the After Effects CH got the file.

  

• Hey guys new here and need help guy how to turn on my CS2 after 30 days grace. It's an older version, I bought new off Ebay and I tried all online and phone nothing has worked and now it does not open?

  need help with an old version of CS and I tried to active several times in 30 days and it don't work and now it will not open now help please!

  CS2 (or earlier version) software activation server replacement

  NOTE that CS2 will not install on a Mac "modern."

  l http://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.htm

  When you install the special version of the PPro2 on a Win7 or Win8 or Win10 computer, you may need to right click on the program icon and select compatibility Windows XP in the popup of option

• VMware alerts, need help

  Nice day

  I am new to VMware and got my first job as a sys admin, I'm alone, no other computer scientists here, so I need help.

  I have a Proliant DL580 G5 acting as one of our ESXi hosts.

  I see that there are a few alerts, I've attached a picture, now my main concern is first the controller... Disk 4 error says, so can I replace disk 4? Or it's the controller that is bad and I only need to replace that? Or should I replace both?

  Also, I have a battery alert but not sure what to do about it, I suppose also that if I need to replace the battery and controller, then I have to turn off the host...

  If it is only the hard drive, can I just replace the bad drive and put in the new? Or what I have to break the first raid, my understanding is that I should be able to simply exchange the drive and it will do the rest, since it is RAID 5

  Help, please

  Thank you.

  If I interpret correctly the screen, you have two question. A defective battery (if it's original to the host of G5, which is probably one) and a failing HARD drive. Assuming you are using the Hot-Swappable 146 GB SAS HARD drive, you can replace the i.e.pull online, the bad disk drive, wait at least a minute or two for the controller to recognize and then insert the new drive. The reconstruction of the drive should begin soon after that the new disk is in place. For the bad battery, I don't think it can be done with the host, so you better replace it with the host turned off to avoid any risk.

  André

• After I updated my iPod wants a lock to activate I need help ASAP

  After I updated my iPod lack of activation I need help ASAP

  Help here > If you do not activate your iPad, iPhone or iPod touch after installing iOS 9.3 - Apple Support

• I need to re-download my cs6 after my book mac crashed and I can't find my package to get the serial number. I need help, I'm just in the middle of editing a photoshoot... ugh!

  I need to re-download my cs6 after my book mac crashed and I can't find my package to get the serial number. Need help please, I'm in the middle of editing a photoshoot... ugh.

  You can download it here: download Creative Suite 6 applications

  If you registered with Adobe, the serial number is the Adobe ID and the password that will be used.

  Otherwise, it will work as a giving fully functional 30-day trial you time to find the package.

  Gene

• HP Pavilion Notebook - 15-p199: need help with the installation and activation of 10 Windows after completely uninstalling Windows

  Hello HP assistants.

  I need help for a specific problem. My laptop came with an installation of Windows 8.1. Then I upgraded to 10 Windows when it became available. After a while, I decided to uninstall Windows completely (to wipe the hard drive) and install a Linux operating system.

  Now, I decided that I want to use some software that is not available on Linux and if I want to reinstall Windows 10. My problem is that Windows has completely disappeared in a form any. So now, I need to download Windows 10 from an official source (which I think can be done fairly easily from the official source of Microsoft, although if there is a better, HP official medium to do this then please recommend it) and then I need to activate Windows some how.

  As has been made clear, I have the right to use Windows 8.1 and 10 but I would need to download Windows 10 and turn it on. Is there a way to do this? I'm literally stuck without solution.

  Thanks in advance.

  Hello

  As long as the previous installation of Windows 10 had activated Ok after upgrade from 8.1, you can simply perform a new installation as described in the guide on the following link.  Note: On the activation screen, select "I don't have a product key" - Windows will activate automatically once installation is complete.

  http://www.howtogeek.com/224342/how-to-clean-install-Windows-10/

  Kind regards

  DP - K