Need help to reinstall the certificate after factory reset

Similar Questions

• How can I only restore contacts and calendar but not the system after factory reset settings?

  Hello

  I have an iPhone 5.  I forgot the password of restrictions long ago and no backups prior to that date.  I want to do a factory reset.  How can I do this while keeping a copy of my contacts, notebooks, lists and schedules, so I can re - sync after the reset?  I don't want to re - sync system settings that my backup plays up and want to do a clean install of the main parameters.

  All advice appreciated.

  Chris

  You need to store your contacts and calendars on your computer or Cloud Computing service.

  AR you not do?

• Backup complete pc cannot find the image after factory reset

  Don't know what forum this is because it is not quite fit any category.  Happy to have redirected it.

  Had some problems with my laptop, so I created a full backup in Vista Business pc.  Then I reset the phone to factory settings and tried to reinstall the saved image.  The Vista is OEM installed, so used F8.  The system can't find the image even if I select D drive and view the file.

  Thinking it's perhaps something to do with connections etc. that I had put in place a new instance, I created a new complete pc backup and it does not find this to be.

  I bought Acronis and copied the original image (which was also recorded on an external drive) then tried to reinstall on drive C.  He failed.

  Don't know what to do next.  Everything seems to be on the disks.  I read something about the load drivers.  Also something about the use of a virtual server.

  Don't know where to go from here.  It's been nearly three days.

  Nine Hills,

  Where you store your backup Image? On your D drive?

  You have access to a retail Vista installation disc? If Yes, you can run the System Recovery Options that allow you to do a complete PC Restore to outside the Vista desktop environment.

  If not, try the following steps:

  1. Click on Start-> in the field type to start searching the backup status and Configuration, click on enter.
  2. Click on restore files on the left, click Advanced Restore. If you are prompted for an administrator password or a confirmation, type your password or click on continue.
  3. Choose the files from a backup made on a different computer.
  4. Select the location of the backup you want to restore. (Can you locate your Image of restoration here?)
  5. Click Next, and follow the wizard to complete your restoration.

  This resolves who you know?

  Rami
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• SPA942 not visible to the network after factory reset

  Hello

  A while ago someone at our office a factory reset on one of our Linksys SPA942 phones.  He thought that it worked (it worked flawlessly; but our router has decreased. Great).  The sad thing is, from the factory, it did not work.

  The problem is that no matter what we try - DHCP or static IP - we do not seem to make this device visible on our network. As in, type us its IP address in a browser and do not see the Setup page.

  We have tried everything we can think of.  Subnet mask is correct. Addresses DNS and IP - PBX (for not they should really make a difference) are correct.  I don't see what the problem is.

  Can someone please offer a suggestion, before go me crazy? !!!

  Thank you very much.

  Jarrod

  First of all, thank you for your response. It prompted me to do some play. Here are the results, in case anyone else having a similar problem (a cable by a novice/cheapskate) stumbles across this post...

  We don't have a SPA9000. Simply, we have a Belkin router wired to four points:

  1. downstairs IP - PBX - work

  2. downstairs SPA942 & PC - both work

  3. downstairs SPA942 & PC - both work

  4 floor SPA942 (does not work) & PC (work)

  So... all PC connect perfectly to the Internet and the network, as do both phones down.

  Following the principle of your simple suggestion ("make sure that it is correctly connected to the network") and the first rule of tech support ("is the computer plugged in, sir?"), I decided to reject the hypothesis that the handset was at fault and check if the connection upstairs was to blame (even if the PC we have up there connects very well).

  Bingo! Telephone three works when it is plugged downstairs. Phone two, which worked fine at the bottom, does not work on the floor.

  So now I know what the problem is... but have no idea WHY the problem is. Why don't the floor point network working perfectly for each device I care to plug in - office book server, ATA, fax, you name it - and not for the SPA942?

  I changed all the cables around the router, in order to verify if there was something wrong with a specific port. That has not changed anything. Assume that all router ports are fine.

  So what does this leave... the cable? Seems unlikely, but all other possibilities have been rejected.

  So, I put the phone on the floor downstairs and plugged directly on the router, using another length of cable. Knit then all three phones.

  Look closer to the floor and found wiring that it is three separate lengths of CAT5, joined with connectors RJ45 base (suppose cabler could not to allow/couldn't be bothered buying a cable length).

  Last question... it is likely one of the lengths is a cable cross/patch... that all the devices other than our SPA942 are smart enough to understand this and to compensate accordingly? How the office is wired, it is very tedious and precarious (12 foot ceilings, etc.) to get in there and change the cable lengths, but obviously do so if it is the likely culprit.

  Thanks again,

  JD

• DVD drive don't read the software after factory reset

  I did a reset to factory my laptop (XPS L502X) to return to Windows 7 from Windows 10 (due to some incompatibilities).

  Subsequently, the reader will read software.

  But fortunately, it will burn on a blank disc (using Roxio). It will not however then read the content.

  He'll play pre-recorded DVD movie

  I tried the suggestions on these forums such as the removal of the driver then re-flashing the BIOS (BIOS is the latest version).

  I tried Microsoft Fixit

  Drive is an optiarc dvd +-rw ad - 7717 h

  Device Manager he describes as a CD-ROM

  Any ideas please? Need a Christmas Miracle!

  I have it

  I ran "Launch the Dell Support Centre" of the center support Dell Dell/tous programs, and as soon as he ran that he recognized the drive.

  Thank you

• WRT600N still cannot connect to the router after factory reset

  OK, so I reset the router but I can not yet connect to installation using the password factory (admin/admin) (white/admin) (admin/empty).   Now, I have a network encrypted and without access to the configuration... I even tried to use the installation CD, but it does not recognize the router.   Anyone have this problem or know of a possible fix?

  Thank you, Carl

  Hey try resetting the reset button of the router in a way to equip
  light flashes on the router & then make a full of electric network
  cycle that is, unplug the power to the modem & router cables

  & then connect the power supply to the modem first once all the lights are
  Green, you can plug the power cable to the router & discover
  This will definitely work!

• I need help to reinstall photoshop. I don't have the original disc. How can I reinstall the PS?

  I need help to reinstall photoshop. I don't have the original disc. How can I reinstall the PS?

  What version of the full scale of the PS do you need?

  Nancy O.

• If I used a creative combination on an old computer, then installed in my new computer but had to do a factory reset on computer; I could still install Creative suit on the same computer even after factory reset with the CD?

  If I used a creative combination on an old computer, then installed in my new computer but had to do a factory reset on computer; I could still install Creative suit on the same computer even after factory reset with the CD?

  Yes, you should be able to reinstall, but if you can you should disable before resetting the machine.  Otherwise, if the two license activations were used and no reset you will need to contact Adobe Support by chat and ask them to reset your activations.

  Chat support - the link below click the still need help? the option in the blue box below and choose the option to chat...
  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Serial number and activation support (non - CC) chat
  http://helpx.Adobe.com/x-productkb/global/Service1.html ( http://adobe.ly/1aYjbSC )

• Get a "Cannot find the files needed" error while trying to do a factory reset on ASUS zenbook.

  * Original title: "can't find the necessary files" Factory reset problem Windows 8

  Hello

  So I just bought an ASUS renovated online - zenbook that came pre-installed with Windows 8. There is some unnecessary programs from ASUS on it and the computer worked quite slowly, so I'm trying to do a factory reset, but when I try, I always get the message "Unable to find the necessary files" and then it asks me to insert the installation disk or media, but I don't have one of those. I tried to go to the command prompt and doing reagentc/Enable, but every time I try I get the message "Windows RE image is not found." Then... I don't know what to do and really need help.

  Thank you

  Hello

  I understand the inconvenience caused to you.

  To remove unnecessary programs provided by ASUS, you can uninstall programs and features.

  Here is the link for more information.

  http://Windows.Microsoft.com/en-CA/Windows-8/uninstall-change-program

  If you reset the PC, all your PC applications will be reinstalled. So, I wish that you contact the ASUS support for assistance to eliminate programs and get the recovery disk to perform the Reset if you want to do it again.

  ASUS also provides the partition recovery for certain laptop models, you can check with them and try to reset the score itself.

  Hope this information helps. If you have any other questions about Windows, please let us know.

• Need help to diagnose the regular system analysis on iMac - processors maxed out

  I need help to identify the cause of a problem that occurs at least 2 - 3 times per day using my iMac (27-inch, mid 2010) running 10.11.5.

  I will use my iMac and then all at once things will start to really trolling. To the point of being completely unusable. Even if I'm able to move my cursor, then click to drag the windows around the screen nothing does really.

  I have iStat menus running so that can see graphics in my menu bar that all 4 cores are completely overfished. Occasionally, I was fast enough to launch the activity monitor to try to see what applications / services are responsible for, the use of % CPU column is completely empty of values, so I can't identify the culprits in a reliable way. I try to keep that column sorted by % CPU use in the hope that he could reveal something and normally it's the kernel_task who is up there.

  I use a Wacom Bamboo dated Tablet (MTE - 450 has) instead of a mouse, and at one point, I was convinced the pilot of PenTabletDrive it is based on was to blame. I contacted Wacom on this subject, and although there is no known issues they pointed out that although the latest drivers will allow me to use the tablet that they no longer support older devices. I was wondering if there was a problem of communication between the device and a driver that is no longer supported. I installed the latest driver supported for my tablet, but the problems persist.

  It may be interesting to note that, when my computer is in this semi-frozen state, I am able to launch the window enough force and quit all open applications leaving me with only the Finder. I guess that means that there are none of my apps running and it is probably one of the services. If I restart the Finder system grinds to a completely enclosed holt.

  I hope someone can let me know what I can find in the Console or elsewhere to help me finally zero in on what is to blame. I can share a log if that helps.

  Thank you in advance!

  Information that might be useful:

  Kept by I tend to be running: Adobe InDesign, Photoshop, Acrobat (all CC 2015), Mail, Safari with several tabs & Dropbox sync constantly.

  Download and run EtreCheck, created by one of his own assistants here in CSA. It is a diagnostic tool that is very useful for us to find problems. It will also give us additional specifications on your Mac. After his execution after the logfile here. It will never contain any personal information.

• I need help to Flash the bios. I have an Aspire 5810TZ. I start and it just says: "acer".

  I need help to Flash the bios. I have an Aspire 5810TZ. I start and he just says "acer" and goes no further. I went to the download page for BIOS on us.acer.com and it has a zip file with 5 files:
  JM4151135.exe
  IN FLORIDA...
  GPC_V135.bin
  Readme.txt
  FLASH. BAT
  What should I do? I tried to copy the files on a USB key and turn on/off with Fn + ESC key. After the release the power button and pressed Fn - Esc another screen appears after 30 seconds. I gave up and gave her 30 minutes but it does nothing. I read another person that should be flashing power button online. I have to rename one of the files. Help, please!

  Aspire 5810TZ menu of frozen startup.

  I finally understand it.

  I couldn't start a back b/c drive, it me did not start anything.

  I followed this chain of logic:

  -Downloaded the bios (2.35 is the one that worked for me)
  -Find the exe file in the winflash file.
  -Extract the files in archive exe using the 7-Zip program
  -Find the .fd file and rename it to JM41X64. FD (I read in a forum was unique in my laptop)
  -Copied JM41X64. FD and FLASH it is. EXE on a USB
  -A the battery and the hard drive out.
  -With its trendy diet I supported Fn + Esc and that you press the power button once while ensuring that the Fn + Esc has been always held down.
  -J' waited 6 seconds and release the Fn + Esc and seen the flashing flash player
  -After about 10 minutes, restarted the machine and the bios as like new.

  Later, I found that there was a hard drive problem.

  I want you guys should help more. All I needed was the name of the JM41X64 file. FD and you don't know how many hours I put into trying to find how simpy bios flash. It is not that difficult for someone with a b.s. in computer science to learn how. Couldn't we a m.s. back b/c the bios drive was messed up. F12 didn't work.

• I need help to reinstall my printer software.

  I need help to reinstall my printer on my computer software, it will not be installed now like originally.  My computer is Windows XP 32 bit Pro.  My printer HP Deskjet 930c/932C/p35c, my cd drive is HP deskjet 932c.  I deleted the printer so that I can reinstall because I sometimes had a problem with my preview before printing and print.  When I install the disk shows up nothing to indicate that the disc has been inserted.

  Hello

  You can download the software to print below:

  http://ftp.HP.com/pub/softlib/software3/dj1162/DJ-20433-1/930-enu-XP.exe

  If the printer is connected by USB, make sure to unplug it and restart your PC before starting the installation.

  Kind regards

  Shlomi

• Need help to install the network on laptop drivers

  I have a laptop of HP 2000-239WM and recently erased due to trying to sell. However, when I reinstalled everything back on the PC, no network drivers have been installed, so I have no access to the internet, wireless and wired. Should what programs I install via USB in order to solve this problem?

  The network adapter driver specifically requests the Ethernet, wifi and it...

  Hello McKinley,

  Thank you for visiting Microsoft Community and we provide a detailed description of the issue.

  According to the description, I understand that you need help to install the network drivers into the laptop.

  Certainly, I understand your concern and will try my best to help you.

  In order to install the NIC drivers in the system, I suggest to visit the link below and check if that helps.

  http://support.HP.com/us-en/drivers/selfservice/HP-2000-200-notebook-PC-series/5091493/model/5119030

  Note: Make sure you have access to the internet to another computer and download the network drivers using the USB and install on your laptop.

  I hope this information is useful.

  Please let us know if you need more help, we will be happy to help you.

  Thank you.

• Hi need help I get the error message "Download error, Undefined" in the applications tab to install Apps. Can someone help?

  Hi, I need help, I get the error message "Download error, Undefined" in the applications tab to install Apps. Can someone help?

  Follow the procedure below and check:

  
  

  End Adobe partner all tasks in the Manager of tasks like creative cloud, CoreSync, AAMUpdater... etc.
  

  Uninstall Adobe Creative Cloud application.

  If you face any problem try CC Uninstaller:

  Using creative cloud | Uninstall the creative cloud desktop application

  After removing Adobe Creative Cloud applications, follow these steps:

  Step 1:

  Open the c: drive and navigate to C:\Program Files (x 86)------\Adobe " common files".

  Open the Adobe folder and delete folders named Adobe Application Manager and OOBE.

  Step 2:

  Navigate to C:\Program Files (x 86) \Adobe.

  Open Adobe file and if present the file to remove Adobe Creative Cloud . [* important]

  Impossible to remove?

  Rename it as Adobe Creative Cloud-old.

  Step 3:

  Press Windows button (located between Ctrl and Alt buttons) with the key R together at once, you will get a command window.

  Type below command and press the enter"" key.

  AppData

  Then go to the Local > Adobe.

  Open the Adobe folder and delete folders named AAMUpdater and OOBE.

  
  

  Step 4:

  Temporarily disable anti-virus and firewall.

  
  

  (1) open Control Panel and then click on the network and Internet"" option.

  2) click on Internet options, click on the tab "connections".

  (3) in the 'Connections' tab, select 'LAN' settings, you will be able to view the LAN settings box.

  (4) check the box-"automatically detect settings" and then "uncheck" all the other boxes as "configuration Script auto use", "Use a proxy server," proxy server ", then click on the ok button."

  5) click on the "Network settings" button once again, make sure that "Automatically detect settings" is the only option you select, the window of properties of LAN so clear.

  
  

  Step 5:

  Make sure that Adobe Creative Cloud is not listed in the control panel > programs and features. list.

  Then, download and install the Adobe Creative Cloud app and check.

  https://ccmdls.adobe.com/AdobeProducts/KCCC/1/Win32/CreativeCloudSet-up.exe

• Stolen laptop need help to reinstall Dreamweaver and Fireworks

  Hi, my laptop was stolen last weekend and I need help to reinstall Dreamweaver and Fireworks on my new MacBook Pro. I have the original software with serial etc. but of course I need to download via the web. Anyone know how I can do this? I don't have a DVD player for the MacBook either.

  ask a number of adobe support resetting activations.  Contact adobe during the time pst support by clicking here and, when available, click on "still need help," https://helpx.adobe.com/contact.html

  Available downloadable Setup files:

  • Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC, XI, X | 9,8 | 9 standard
  • First Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
  • Photoshop Elements: 13 | 12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
  • Lightroom: 6| 5.7.1| 5 | 4 | 3
  • Captivate: 8 | 7 | 6 | 5.5, 5 | 1
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".