need help table
(Sorry for the double posting, I think it fits better here)aghhhh, I'm so frustrated with IE - in any case, I need help - something is wrong, and I can't understand it out for the life of me, I worked on the redesign of my site, began, bad move LOL. I love the colors and the layout, but he was hurt on the first day, it is a form of a model, modified to better tailor the site, but tables are ruin in IE badly. in firefox, they appear ok, most of the time LOL.
If someone can take a look and see where I am going wrong. I really want to have to start all over again, it's getting to be more hassle that it is worth. IM about to tell my friend (her site) I can't not do it, as I'm so horrible at it of course, I could make it work then suddenly a little change he kills, and of course I do not it all, I changed... in any case, thank you very much in advance for any help you can offer I really appreciate it.
Here is the link - http://www.maxoutyourcashout.com/maxoutsite/index.htm
There is a logon because it does not yet so I don't want to have indexed - username and password are "open".
Thanks again!
Using Dreamweaver MX on windows XP
Eve
site problem
You use the layout of DW, mode which will make the site difficult to maintain and troubleshoot. You are much better learn how to use nested tables or CSS to layout your site.
Tags: Dreamweaver
Similar Questions
-
Need help in generating XML data to a table in XML format
Hi all
I need help to generate an xml file using the data below.
The table name is T_Data have 4 columns as shown below with data.
Neighbourhood region Division
---------- ----------------------- ----------- -----------
Northwest Northern California San Jose SJStore1
Northwest Northern California San Jose SJStore2
Northwest North of California to the North of THE LAStore1
Northwest North of California to the North of THE LAStore2
Northwest North of California to the North of THE LAStore3
I want to generate an XML file using SQL/XML functions and the XML file should look like as below.
<>region
< name of region > Northwest < / name of the region >
< Division >
Northern California < division name > < / Division name >
District of <>
SanJose < district name > < / District name >
<>store
< store name > SJStore1 < / name >
< store name > SJStore2 < / name >
< / store >
< / district >
< / division >
< / region >
Very much appreciate your help here.
Thank you.I tried to group the lines, but they did not then provide a correct output.
To unflatten dataset, we can use nested GROUP-BY subqueries.
The following will produce a line by region.
If all regions must be grouped in a single root element (does not so appear according to the directives of the sample), we just add an another XMLAgg.SQL> with sample_data as 2 ( 3 select 'Northwest' reg, 'Northern California' div, 'San Jose' district, 'SJStore1' st from dual union all 4 select 'Northwest' reg, 'Northern California' div, 'San Jose' district, 'SJStore2' st from dual union all 5 select 'Northwest' reg, 'Northern California' div, 'North LA' district, 'LAStore1' st from dual union all 6 select 'Northwest' reg, 'Northern California' div, 'North LA' district, 'LAStore2' st from dual union all 7 select 'Northwest' reg, 'Northern California' div, 'North LA' district, 'LAStore3' st from dual 8 ) 9 select reg 10 , xmlserialize(document 11 xmlelement("Region" 12 , xmlelement("RegionName", reg) 13 , xmlagg( division_xml ) 14 ) 15 indent -- for display purpose 16 ) as region_xml 17 from ( 18 select reg 19 , xmlelement("Division" 20 , xmlelement("DivisionName", div) 21 , xmlagg( district_xml ) 22 ) as division_xml 23 from ( 24 select reg 25 , div 26 , xmlelement("District" 27 , xmlelement("DistrictName", district) 28 , xmlelement("Store" 29 , xmlagg( 30 xmlelement("StoreName", st) 31 ) 32 ) 33 ) as district_xml 34 from sample_data 35 group by reg 36 , div 37 , district 38 ) 39 group by reg, div 40 ) 41 group by reg ; REG REGION_XML --------- -------------------------------------------------------------------------------- Northwest
Northwest Northern California North LA LAStore1 LAStore3 LAStore2 San Jose SJStore1 SJStore2 -
Need help for query flat_file type clobdata oracle table data.
Hi Sir,
I need help to query oracle table flat file data having given clob type.
COLUMN FOR CHAR_DATA FLAT_FILEOracle Version: Oracle Database 10g Express Edition Release 10.2.0.1.0 - Product PL/SQL Release 10.2.0.1.0 - Production "CORE 10.2.0.1.0 Production" TNS for 32-bit Windows: Version 10.2.0.1.0 - Production NLSRTL Version 10.2.0.1.0 - Production Source table CREATE TABLE order_details ( QUEUE_SEQNUM NUMBER(10,0) NOT NULL ENABLE, LINE_SEQNUM NUMBER(10,0) NOT NULL ENABLE, CHAR_DATA CLOB, OPTIMISTIC_LOCK_KEY NUMBER(20,0) )
EXPECTED RESULTS:EU,6067AT,AT10,000000402004,NexiumGERDManagementProject,Z435,,ZZ29,NIS-GOLD,AT EU,6067AT,AT10,000000402038,NIS-OEU-ARI-2007/1,Z450,,ZZ29,NIS-OEU-ARI-2007/1,AT EU,6067AT,AT10,000000402039,SymbicortNISinCOPD,Z450,,ZZ29,NIS-REU-DUM-2007/1,AT EU,6067AT,AT10,000000402040,D1443L00044SeroquelXRRuby,Z450,,ZZ29,D1443L00044,AT EU,6067AT,AT10,000000402041,NIS-GEU-DUM-2008/1,Z450,,ZZ29,NIS-GEU-DUM-2008/1,AT EU,6067AT,AT10,000000402042,SonstigeAktivitätenLCM,Z450,,ZZ29,.,AT EU,6067AT,AT10,000000402134,D1680L00002Saxagliptin,Z450,,ZZ29,D1680L00002,AT EU,6067AT,AT10,000000402199,SeroquelWaveNIS,Z450,,ZZ29,NIS-NEU-DUM-2009/1,AT EU,6067AT,AT10,000000402313,SeroquelExtra(D1443L00082),Z450,,ZZ29,D1443L00082,AT EU,6067AT,AT10,000000402517,AtlanticD5130L00006(AZD6140),Z450,,ZZ29,D5130L00006,AT EU,6067AT,AT10,000000554494,ArimidexSt.Gallen(13+2),Z142,,ZZ09,,AT EU,6067AT,AT10,000000554495,ArimidexASCO(5delegates),Z142,,ZZ09,,AT EU,6067AT,AT10,000000554496,ArimidexSanAntonio6delegates,Z142,,ZZ09,,AT EU,6067AT,AT10,000000554497,ArimidexBreastCancerSummit(13+2),Z130,,ZZ09,,AT EU,6067AT,AT10,000000554498,ArimidexEIH(15delegates),Z130,,ZZ09,,AT EU,6067AT,AT10,000000554499,ArimidexNIFA(200delegates),Z135,,ZZ09,,AT EU,6067AT,AT10,000000554500,ArimidexNIFAworkshops(8x25),Z135,,ZZ09,,AT EU,6067AT,AT10,000000554501,ArimidexPraktischeGyn.Fortbildung,Z147,,ZZ09,,AT EU,6067AT,AT10,000000554502,ArimidexAGO,Z147,,ZZ09,,AT EU,6067AT,AT10,000000554503,ArimidexHämato/OnkologieKongress,Z147,,ZZ09,,AT EU,6067AT,AT10,000000554504,ARIMIDEXGYNäKOLOGENKONGRESS,Z147,,ZZ09,,AT EU,6067AT,AT10,000000554505,ArimidexChirurgenkongress,Z147,,ZZ09,,AT
AFFIRM_CODE COMPANY_CODE INTERNAL_ORDER_CODE INTERNAL_ORDER_DESC ENIGMA_ACTIVITY SUB_ACTIVITY_CODE IN_AFF_IND ORDER_TYPE EXTERNAL_ORDER COUNTRY EU 6067AT AT10 000000402004 NEXIUMGERDMANAGEMENTPROJECT Z435 NULL ZZ29 NIS-GOLD AT EU 6068AT AT11 000000402005 NEXIUMGERDMANAGEMENTPROJECT Z435 NULL ZZ29 NIS-GOLD AT
Sorry, my bad. Without database at hand, I'll try 'baby steps' (borrowed from Frank) so you don't confuse it with errors that I might add (happens far too often already, but at least you won't "swallow" as forum members think is one of the main goals of this fighter - help her learn - providing not only the proverbial fish.)
Search the Forum - your problem is one of its best sellers. Watching {message identifier: = 10694602} ("split string into" was the key word used in research) you can try something asselect table_row, level clob_row, regexp_substr(char_data,'[^' || chr(13) || chr(10) || ']+',1,level) the_line from (select to_char(queue_seqnum)||':'||to_char(line_seqnum) table_row, char_data from order_details ) connect by regexp_substr(char_data,'[^' || chr(13) || chr(10) || ']+',1,level) is not null and prior char_data = char_data and prior table_row = table_row and prior sys_guid() is not null
to get all the s the_lineall CLOB and after that the use of the example even to get your columns of each the_line.
Concerning
Etbin
Edited by: Etbin on 3.2.2013 09:01
.. .but I m connected to do things according to the instructions, I can't do something.
Used to happen to me too and I did as told to the but only after explaining any disadvantages, I was aware of in time. The last sentence is usually: "O.K. now be just and Don't come back with that kind of thing when it turns out that this isn't the right thing."
rp0428 post - something to remember. -
need help to trigger to update the change of columns of a table
Hi all
I need help in the manufacture of change update trigger in the columns from one table to another table.
For example, table (col1 col 2 col 3 col 4 col 5 samplea
.. .Col 20
Now if I do any change in one of the data column must be changed to
sample_copya... table that contains duplicate column
So for this I thought to create a trigger with the following logic
If updating (col1) then
Update sample_copya set col1: =: new.col1 where n ° 1 =: new.no1;
Otherwise, if the update (col2) then
Update sample_copya set col2: =: new.col2 where n ° 1 =: new.no1;
Otherwise, if the update (col3) then
Update sample_copya set col3: =: new.col3 where n ° 1 =: new.no1;
end if;
But how doi handle if all columns are changed or say 2 columns record the number of columns is more than 20...
I would like to know if there is a simpler method to achieve...
Thank yoususf wrote:
Hi all
I need help in the manufacture of change update trigger in the columns from one table to another table.
For example, table (col1 col 2 col 3 col 4 col 5 samplea
.. .Col 20Now if I do any change in one of the data column must be changed to
sample_copya... table that contains duplicate columnSo for this I thought to create a trigger with the following logic
If updating (col1) then
Update sample_copya set col1: =: new.col1 where n ° 1 =: new.no1;
Otherwise, if the update (col2) then
Update sample_copya set col2: =: new.col2 where n ° 1 =: new.no1;
Otherwise, if the update (col3) then
Update sample_copya set col3: =: new.col3 where n ° 1 =: new.no1;end if;
But how doi handle if all columns are changed or say 2 columns record the number of columns is more than 20...
I would like to know if there is a simpler method to achieve...
Thank youWhat is the purpose of this trigger?
How can you be sure that ' where n ° 1 =: new.no1 "is true?
How does line in the SAMPLE_COPYA table at the start?
only the last modified value will lie in SAMPLE_COPYA than the previous values is written more -
Need help to create a scrollbar in HTML table
Hello dreamweavers!
I need help here please...
I need to create a table with three columns... or a webpage... that has the ability to scroll when things are added.
This is a music site and page Web will be a list - a database of all sorts - of each title artist and album. If there are say, 200 titles in the catalog, then I need to list them all on one page and in 3 columns towards the bottom of the page. What I did using a table in HTML in Dreamweaver. The problem is each title on the table is static and when adding in a new title in the catalog, ALL securities will have to be moved manually. So, I need to create a table where when I add another title (they will be alphabetical) say to am' for example, then all of the other titles will be automatically moves along a (somewhat as in a Word document by adding a new line). Everything else is automatically shifted. I don't know if this is still possible in Dreamweaver?I hope that I have explained this correctly. It's quite a strange problem, and as such, I have been unable to find anything on this forum or google search.
If anyone can help that would be most excellent! I'd be happy.Questions - if you need further information please ask
I use Dreamweaver CS5.5 Version 11.5 Build 5315
I have a Macbook Pro with Snow Leopard if that's at all relevant.
My site is on Wordpress with the theme, Suffusion. I can link to it, if someone needs.
Here is a picture of the table, as I did, to give an idea what it looks like:
Thank you!
P.I.G > /.
big dreamers never sleep
Mylenium was right. You must use a database for this server-side.
Maintenance of static tables with this amount of data is going to be a logistical nightmare - not even worth considering. Get an indexing plugin for WordPress.
Nancy O.
-
* Need help with importing partial data of RDBMS table NHI repository *.
Hello
I need help to import the partial table RDBMS data, I tried the content in the logical source but still show me all the data available in the database.
The table contains the partitioned data for which I want to only import single partion according to the partion of function value.
IE contry = 'Fr '.
Thanks in advance.
See you soon,.
RajeevOne possibility is to do the filtering on the physical level itself. You could use a physical table of type 'Select' and filter the data.
Thank you!
-
Hi, I recently bought numbers in order to create a commercial newspaper. I'm the pen and paper. I need help to create a formula. A purchase column; Determines if the entry price column is subtracted from the price of output column (buy) or subtracted from (Sell) entry exit. Thank you for your help
Hi B',.
Buying and selling in column B
Price of entry in column c.
Exit in column D price
Formula (and outcome) in column E
If the column will B always contained 'Buy' or 'Sell', it works. It is default to a calculation of 'sell' if sale or has been specified.
E2: = IF (B = "Buy", D - C, C - D)
If you want to delay the calculation until the amounts entered in C and D, use this version:
E2: = IF (OR (LEN (C) < 1, LEN (D) < 1,"", IF (B = "Buy", D - C, C - D) ")
If you want to delay the calculation until all three ducks are on a line (B contains buy or sell, C and D contain both data), use this version:
E2: = IF (OR (LEN (C) < 1, LEN (D) < 1,"", IF (B = "Buy", D - C, IF(B="Sell",C-D,) "" ")))
Third version used in this table.
Kind regards
Barry
-
Hi all
I am a beginner in Labview. If need help in loops. Please check the attached vi and suggest me the procedure I followed is effective or not. If this is not the case, correct me.
Waiting for answer
According to the commentary of diagram, table sizes are all 16, then here is everything you need:
(Hmm, clips chiseled Booleans in the constant diagram, just ignore that)
"Elements of an array AND" checks if all a real (upper thread)
'The GOLD table elements' check if at least one is true. (all others)
-
Hello
IM needing help to cut a string like this... A, B, C, ADV, RAHEEM, MOUSTAFA, Gauthier,... compare letters he's be numbers, but I get by using a string... Need to divide and put each number into a vector, in all positions...
Can someone help me? ..
I'm using labview 6...
Here is the screenshot of my logic...
Hi faelnpaiva,
all you need is 'String of spreadsheet in table' with a ',' as the delimiter.
-
Need help solving any internet connection. This just started today, but it's happened to me several months ago and at that time the provider thought it was software related and suggested that I have to contact HP. I have a HP 2006 m7674n, Windows XP. For several days, I worked with HardBeatZ on a different issue that has been resolved today. However, for several days, I had been working msconfig to track down the cause of the problem; This resulted in several reboots the computer - this would have something to do with it? Also, I just started getting a RUNAS box popping up. HardBeatZ has provided a link to a possible solution to this, but since I can't do internet connection I can't get the fix. Right now I'm on a laptop with Wi - Fi for the same service internet/modem as my PC. I changed nothing onmy PC in the last days of several for the internet connection or services. I always use eithernet connection from the router to the computer. I tried Wi - Fi today with my PC but not connect. I tried to unplug the router and reconnect but it does not solve the problem. I did a Network Diagnostic and printed the report; Here are the warnings and error messages in this report:
1. under the terms of the bridge diagnosis; Warning: "www.microsoft.comcould hostname not be resolved (0x2afc error code). Could be the gateway or DNS problem.
2. under diagnosis of layer IP; Corrupted IP routing table. Default route, road closures, route host itinerary local subnet and local are all valid; Invalid entries in the ARP cache. ACTION: the ARP cache has been emptied. »
3. UNDER HTTP, HTTPS, FTP Diagnostic; all three had this warning: ' 12007 connection error at www.microsoft.com: the server name or address cannot be resolved. " and the error was unable to establish a connection.
Still under network adapter diagnosis; It shows the connection status of network as "connected."
Also, I have an older computer that I connected with eithernet and was able to connect to the internet but has been disconnected because the version of Windows is too old to support the connection. But I could briefly connecting on HP website before you log out. The point being I think it's a computer problem and not an internet router or provider problem.
I read a few entries on this site and it seemed that the recovery of the system was the only solution. I hope that there are other things to try before I resort to that.
I would appreciate any advice on the steps to diagnose the problem and insight as to what may have caused this to happen. Thank you. dt2012
Sorry... still with you... OK, we know that your network card is good and we know that your first post;
1. under the terms of the bridge diagnosis; Warning: 'host www.microsoft.com name could not be resolved (0x2afc error code). Could be the gateway or DNS problem.
2. under diagnosis of layer IP; Corrupted IP routing table. Default route, road closures, route host itinerary local subnet and local are all valid; Invalid entries in the ARP cache. ACTION: the ARP cache has been emptied. »
3. UNDER HTTP, HTTPS, FTP Diagnostic; all three had this warning: "error 12007 connecting to www.microsoft.com: the server name or address cannot be resolved." and the error was unable to establish a connection.
4. still under network adapter diagnosis; It shows the connection status of network as "connected."
For me, it seems that Internet Explorer is corrupted or damaged. Your computer is shipped with Microsoft Windows XP Service Pack 2 Media Center Edition 2005 but since you can have updated to XP SP3 or upgraded to a newer version of Internet Explorer. Please try the options listed in this document to Microsoft titled "how to reinstall or repair Internet Explorer" , since there are several options depending on your system configuration, please post if you need help to solve your problem.
-
Need help with Activation after upgrading to Vista
Separated from this thread.
Hi Gerry,
I need help to reactivate. I lost my case and if the product key. I have upgraded from Vista pre-installed on my desktop HP for Windows 7 Professional 2 years back and recently meet with problems and my reason for re-setup. Please find the details below you requested.
Diagnostic report (1.9.0027.0):
-----------------------------------------
Validation of Windows data-->Validation code: 50
Code of Validation caching online: 0x0
Windows product key: *-* - CM74G - RPHKF-PW487
Windows product key hash: 71BRYMECVaSXedfumfu8zryHJVY =
Windows product ID: 00371-177-0000061-85643
Windows product ID type: 5
Windows license type: retail
The Windows OS version: 6.1.7601.2.00010100.1.0.048
ID: {E9827CAB-B22C-4676-8C2F-F77EDCD000E6} (1)
Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Product name: Windows 7 Professional
Architecture: 0x00000000
Build lab: 7601.win7sp1_rtm.101119 - 1850
TTS error:
Validation of diagnosis:
Resolution state: n/aGiven Vista WgaER-->
ThreatID (s): n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002Windows XP Notifications data-->
Cached result: n/a, hr = 0 x 80070002
File: No.
Version: N/a, hr = 0 x 80070002
WgaTray.exe signed by: n/a, hr = 0 x 80070002
WgaLogon.dll signed by: n/a, hr = 0 x 80070002OGA Notifications data-->
Cached result: n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002
OGAExec.exe signed by: n/a, hr = 0 x 80070002
OGAAddin.dll signed by: n/a, hr = 0 x 80070002OGA data-->
Office status: 109 n/a
OGA Version: N/a, 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3Data browser-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default browser: C:\Program may Explorer\IEXPLORE.exe
Download signed ActiveX controls: fast
Download unsigned ActiveX controls: disabled
Run ActiveX controls and plug-ins: allowed
Initialize and script ActiveX controls not marked as safe: disabled
Allow the Internet Explorer Webbrowser control scripts: disabled
Active scripting: allowed
Recognized ActiveX controls safe for scripting: allowedAnalysis of file data-->
Other data-->
Office details:{E9827CAB-B22C-4676-8C2F-F77EDCD000E6} 1.9.0027.0 6.1.7601.2.00010100.1.0.048 x 32 *-*-*-*-PW487 00371-177-0000061-85643 5 S-1-5-21-439732754-3583098255-2330885285 HP-Pavilion FK869AA-Y2K A6640D Phoenix Technologies, LTD 5.22 20090507000000.000000 + 000A5E63007018400FA 0409 0409 China Standard Time(GMT+08:00) 0 3 HPQOEM SLIC-CPC 109 Content Spsys.log: 0 x 80070002
License data-->
The software licensing service version: 6.1.7601.17514Name: Windows 7 Professional edition
Description: operating system Windows - Windows (r) 7, retail channel
Activation ID: e838d943-63ed-4a0b-9fb1-47152908acc9
ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
Extended PID: 00371-00170-177-000006-00-1033-7601.0000-2262016
Installation ID: 002356937435887266876642539776934946293206562961099182
Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
Partial product key: PW487
License status: Notification
Reason for the notification: 0xC004F009 (grace period expired).
Remaining Windows rearm count: 3
Time to trust: 13/08/2016 23:04:17Windows Activation Technologies-->
HrOffline: 0x00000000
HrOnline: n/a
Beyond: 0 x 0000000000000000
Event time stamp: n/a
ActiveX: Registered, Version: 7.1.7600.16395
The admin service: recorded, Version: 7.1.7600.16395
Output beyond bitmask:--> HWID data
Current Hash HWID: LgAAAAEAAgABAAEAAAACAAAAAQABAAEAJJR687d2wBKqdswpOrBWvv + i8gkqhQ isActivation 1.0 data OEM-->
N/AActivation 2.0 data OEM-->
BIOS valid for OA 2.0: Yes
Windows marker version: 0x0
OEMID and OEMTableID consistent: Yes
BIOS information:
ACPI Table name OEMID value OEMTableID value
HPQOEM APIC-SLIC-CPC
FACP SLIC-CPC HPQOEM
HPET SLIC-CPC HPQOEM
MCFG SLIC-CPC HPQOEM
SLIC SLIC-CPC HPQOEM
SSDT PmRef CpuPmYou use the default key that cannot be used to activate Windows 7. You must enter your product key Windows 7 Professional.
Try the Activate by phone:
Have you tried to restart by phone?
How to activate Windows 7 manually (activate by phone)
1) click Start and in the search for box type: slui.exe 4
(2) press the ENTER"" key.
(3) select your "country" in the list.
(4) choose the option "activate phone".
(5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
(6) explain your problem clearly to the support person.
http://support.Microsoft.com/kb/950929/en-us -
Need help with slui message with the Validation Code: 50
OT: need help with the message 'victim' slui...
Diagnostic report (1.9.0027.0):
-----------------------------------------
Validation of Windows data-->Validation code: 50
Code of Validation caching online: 0xc004c4a2
Windows product key: *-* - YMK9F - 7Q3XK-X7D3P
Windows product key hash: 9WDJkbD1PdUJ + GCdK63bG2yus5g =
Windows product ID: 00371-702-8613485-06367
Windows product ID type: 5
Windows license type: retail
The Windows OS version: 6.1.7601.2.00010100.1.0.048
ID: {60986DD4-5ADA-464C-A590-469385BD5D3A} (1)
Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Product name: Windows 7 Professional
Architecture: 0 x 00000009
Build lab: 7601.win7sp1_gdr.150928 - 1507
TTS error:
Validation of diagnosis:
Resolution state: n/aGiven Vista WgaER-->
ThreatID (s): n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002Windows XP Notifications data-->
Cached result: n/a, hr = 0 x 80070002
File: No.
Version: N/a, hr = 0 x 80070002
WgaTray.exe signed by: n/a, hr = 0 x 80070002
WgaLogon.dll signed by: n/a, hr = 0 x 80070002OGA Notifications data-->
Cached result: n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002
OGAExec.exe signed by: n/a, hr = 0 x 80070002
OGAAddin.dll signed by: n/a, hr = 0 x 80070002OGA data-->
Office status: 109 n/a
OGA Version: N/a, 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3Data browser-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default browser: C:\Program Files (x 86) \Mozilla Firefox\firefox.exe
Download signed ActiveX controls: fast
Download unsigned ActiveX controls: disabled
Run ActiveX controls and plug-ins: allowed
Initialize and script ActiveX controls not marked as safe: disabled
Allow the Internet Explorer Webbrowser control scripts: disabled
Active scripting: allowed
Recognized ActiveX controls safe for scripting: allowedAnalysis of file data-->
Other data-->
Office details:{60986DD4-5ADA-464C-A590-469385BD5D3A} 1.9.0027.0 6.1.7601.2.00010100.1.0.048 x 64 *-*-*-*-X7D3P 5 S-1-5-21-4040712825-3780279311-4191590923 the system manufacturer ,System Product Name American Megatrends Inc. 00371-702-8613485-06367 0802 20110601000000.000000 + 000F3A53C07018400FE 0409 0409 Central Standard Time(GMT-06:00) 0 3 109 Content Spsys.log: 0 x 80070002
License data-->
The software licensing service version: 6.1.7601.17514Name: Windows 7 Professional edition
Description: operating system Windows - Windows (r) 7, retail channel
Activation ID: c1e88de3-96c4-4563-ad7d-775f65b1e670
ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
Extended PID: 00371-00212-702-861348-00-1033-7601.0000-1142014
Installation ID: 022214046070387640229264400212325972472065330163335456
Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
Machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
Partial product key: X7D3P
License status: Notification
Reason for the notification: 0xC004F200 (non-genuine).
Remaining Windows rearm count: 4
Trust time: 12/01/2016 11:28:57Windows Activation Technologies-->
HrOffline: 0x00000000
HrOnline: 0xC004C4A2
Beyond: 0 x 0000000000000000
Event timestamp: 1:11:2016 12:55
ActiveX: Registered, Version: 7.1.7600.16395
The admin service: recorded, Version: 7.1.7600.16395
Output beyond bitmask:--> HWID data
Current HWID of Hash: QAAAAAEAAwABAAEAAQADAAAABwABAAEAln3OI0bUDFRsO24dgCKo58SW2JyUY/1mMckmPrb67HxoDsAKMMl2Vg ==Activation 1.0 data OEM-->
N/AActivation 2.0 data OEM-->
BIOS valid for OA 2.0: Yes, but no SLIC table
Windows marker version: N/A
OEMID and OEMTableID consistent: n/a
BIOS information:
ACPI Table name OEMID value OEMTableID value
APIC1425 APIC 060111
FACP 060111 FACP1425
HPET 060111 OEMHPET
MCFG 060111 OEMMCFG
LASRYVITRAGE OEMB1425 060111
ASPT 060111 PerfTune
OEMOSFR OSFR 060111
SSDT DpgPmm CpuPmHello
Thanks to everyone who responded to my question.
Turns out it would not activate the system properties page.
He did, however, turn on the tool online browser without a
hitch. Yes, problem solved.
Jon
-
Need help to identify the type of object in the loop of pl/sql
Hello
I need help to identify the Type of object declared beneath a procedure as shown below:
I need to pass the parameter to the procedure as a TYPE of OBJECT and also refer to variables of Type Object in a loop
create or replace type TEST_VALIDATION_REC is RECORD (order_num varchar2 (30),)
number of inventory_item_id
reserved_YN varchar2 (1).
error_flag varchar2 (1).
Error_message varchar2 (2000)
);
CREATE OR REPLACE TYPE VALD_TBL AS VARRAY (10000) OF TEST_VALIDATION_REC;
PROCEDURE ADD_TO_ORD)
p_lot_number_list IN VALD_TBL,
p_ord_number IN Varchar2,
p_user_id in NUMBER: = fnd_profile.value ('USER_ID'),-change 1.10
p_responsibility_id in NUMBERS: = fnd_profile.value ('RESP_ID'),-change 1.10
p_application_id IN VARCHAR2: = 'PO',-change 1.10
x_error_flag OUT Varchar2,
x_error_msg OUT Varchar2
)
In the above procedure, I had the VALD_TBL. Is it OK?
And how in the loop if the records if I use:
FOR indx1 IN 1.p_lot_number_list. COUNTY
LOOP
BEGIN
SELECT
inventory_item_id
IN
ln_item_id
Of
dummy_lot_tab
WHERE
lot_number = p_lot_number_list (indx1); - > how direct the item here?
EXCEPTION
WHILE OTHERS THEN
ln_item_id: = NULL;
END;
Records are PL/SQL objects. They are not the SQL objects. You can create a SQL TYPE (schema level) as a collection (variable-tables only, tables nested).
So therefore your first statement is syntactically incorrect
CREATE OR REPLACE TYPE TEST_VALIDATION_REC IS RECORD (order_num VARCHAR2(30), inventory_item_id NUMBER, reserved_YN VARCHAR2(1), error_flag VARCHAR2(1), Error_message VARCHAR2(2000) );
You must put in an anonymous PL/SQL block or the stored procedure
DECLARE TYPE test_validation_rec IS RECORD ( order_num VARCHAR2(30), inventory_item_id NUMBER, reserved_YN VARCHAR2(1), error_flag VARCHAR2(1), error_message VARCHAR2(2000) ); TYPE vald_tbl iS VARRAY(10000) OF test_validation_rec; lv_tbl vald_tbl; BEGIN lv_tbl := vald_tbl(); -- insert your code here END;
-
Need help on code PLSQL bit reality
Hello
I need help of reality bit on encoding.
I want to code a procedure that looks like where is a row in a table that is older, then a day and remove this line, but before that he sent an e-mail to the e-mail address that is stored in this row of the table.
Here is the example:
Table name: une_table
Columns: Username | SOMEINFO | CREATE_DATE | CODE_THING | EMAIL_ADDRESS
Lines: user1 user1info 4 April 15 06.15.45.00PM XY2ZH89J [email protected]
User2 user2info 4 April 15 06.15.45.00PM KJH43TZH [email protected]
util_3 user2info 7 April 15 09.10.35.00PM LQT3B8N [email protected]
My test of this code (it just an example):
DECLARE l_emailadres varchar2(50); BEGIN SELECT email_address into l_emailadres FROM some_table WHERE create_date < sysdate -1; APEX_MAIL.SEND( p_to => l_emailadres, p_from => '[email protected]', p_subj => 'Email Info', p_body => ‘Your row was deleted!’); APEX_MAIL.PUSH_QUEUE(); DELETE FROM some_table WHERE create_date < sysdate -1; END;
The problem is that there is more than one line which is given back then it gives me an error "in l_emailadres" because there is that [email protected] and [email protected] are selected.
I need a solution on this.
I'd appreciate any help.
Of course, it would be better if someone can give me a code example.
Thank you!
Of course, it seems that apex_mail.push_queue () performs a validation. It does not work with a 'for update cursor.
Therefore, place the push_queue after the loop:declare
cursor c_x
is
Select email_address
of une_table
where create_date< sysdate="">
update the email_address;
Start
for in c_x r_x
loop
remove from une_table location being the c_x;
apex_mail. Send
(p_to-online r_x.email_address
p_from-online "[email protected]"
p_subj-online 'E-mail Info'
, p_body => "your row has been deleted!
);
end loop;
apex_mail.push_queue ();
end; -
Need help with SQL/PL/SQL for Dates
Hi Experts - need help with a SQL query.
I need to insert some date fields in a table called CALENDAR_PERIOD.
Current data in CALENDAR_PERIOD table with their data types:
STARTPERIOD (DATE) YEAR (NUMBER) PERIOD_LABEL (Varchar2 255)
02/11/2014 2014 2014/02/11 SUN
03/11/2014 2014 14/03/11 MON
04/11/2014 2014 11/04/14 MAR
I have to increment above values up to the year 2025. I don't know how to write SQL and increment of these values.
Ex: My next value should insert: 05/11/2015 2014 11/05/14 WED like that I need to insert data until 12 31, 2025.
Can you please help me with PL/SQL block?
Really appreciate your help!
DB version:
Oracle Database 11 g Enterprise Edition Release 11.2.0.3.0 - 64 bit Production
PL/SQL Release 11.2.0.3.0 - Production
CORE Production 11.2.0.3.0
AMT for IBM/AIX RISC System/6000: Version 11.2.0.3.0 - Production
NLSRTL Version 11.2.0.3.0 - Production
Thank you
SandyHello Sandy,
Maybe something like
INSERT INTO calendar_period (startperiod, year, period_label)
SELECT DATE '' 2014-11-04 + LEVEL
, TO_NUMBER (TO_CHAR (DATE '' 2014-11-04 + LEVEL, "YYYY"))
, TO_CHAR (DATE '' 2014-11-04 + LEVEL, "MM/DD/YY DY")
OF the double
CONNECT BY LEVEL<= date="" '2025-12-314="" -="" date="">=>
;
((mais je ne comprends pas pourquoi nous créons une telle table "année" et "period_label" peuvent être calculé à partir de startperiod))
Best regards
Bruno Vroman.
Maybe you are looking for
-
How much is this going to cost me for updates?
I would like to know how much I will charge for you to make updates?
-
How to import my current favorites from Safari to Firefox?
I want to import all the bookmarks I have for Safari, while I use in Firefox. How is that possible?
-
Satellite m30: BIOS password
I'm in trouble, I forgot my password for bios, how can I enter in my computer now. This laptop I have over 2 years now, and there is no guarantee. If anyone can help?
-
Is it possible to use the WiFi chip once the router is already set up and running?
-
Installation of the 2nd HDD in Optiplex 380
Trying to install my drive of secondary data to another computer in an Optiplex 380. What I have learned and done so far are to install the drive, enter the BIOS to enable the SATA 2 port, and then restart. Windows recognizes the drive at startup and