Need help: the value of checkbox auto fill in the field of text and text field calculation

Similar Questions

• Satellite A200 - please I need help, the screen goes pink and green

  Hello world

  I have a Satellite A200 and I have a problem with my screen. It appears suddenly pink and green and it resolves on its own or when I close the lid. It starts from the Toshiba logo before windows logon. Please help me, thanks in advance.

  Hello

  You can try to find what's wrong with your laptop if you would connect it to the external monitor.
  If the same question would be visible on the second, the external monitor then this screen problem could be related to the graphics chip.

  If the image on the external monitor would be nice laptop computer s internal monitor could be faulty.

  However, in both cases, you must contact the ASP in your country for replacement.

  Good luck

• Need help downloading. Downloaded Windows 10, I went back to windows 8 and my adobe acrobat disappeared.

  Need help downloading. Downloaded Windows 10, I went back to windows 8 and my adobe acrobat disappeared.

  kglad links in response #1 here https://forums.adobe.com/thread/1930162

• Desperately need help - "the partition table on device sda was unreadable." Erase all data?

  I'm forced to install CentOs on my Macbook using a machine virtual (VMWare, which is what I downloaded my teacher recommended). It's for my first class of operating systems, so bare with me because I don't know anything about operating systems (except about how to use Windows and my Macbook). I am also a daughter, what makes my same technical knowledge that much more rare. However, I am eager to learn...

  In any case, I downloaded them both. When I launch Fusion, I choose the file> New> install Windows or another OS on a virtual machine> continue without disk> click on the button that says 'Operating system installation disc using image file'> then I select the appropriate iso CentOS (CentOS - 5.4 - i386-bin-1of6) file> continue> drop down lists, I choose LINUX as operating system and Red Hat Enterprise Linux 5 as my Version> continue-> finish (no customization settings). It appears the screen of CentOS and I am invited by a text asking me if I want to install in text or graphics mode. (Don't know what to do here, but I select the graph). A bunch of white text scroll a screen of black background, then a blue screen shows up saying: 'Welcome to CentOS' at the top and a gray screen that says "to start testing CD media before installation OK press. Choose Ignore to ignore the media test and launch the installation. "I click on the red button (even once, if it is incorrect, let me know). A few rows of white text on black background (from anaconda... something on a video card...) then a nice graphic display of CentOS which I click NEXT. I then select English as my tongue (twice) and I gives me the message:

  "The partition table on device sda (VMware, VMware Virtual S 20473 MB) was unreadable. To create new partitions, it must be initialized, cauing the loss of all DATA on this drive. This operation will replace all choice on what players to ignore previous installation. You would like to initialize this drive, erasing all THE DATA? »

  I have no idea what to do here. I googled the message and others have been too, but they can talk about some hard file (and I have no idea what it is, and I can't seem to find mine).

  I can't lose what's on my hard drive (my school, music, photos, applications, files etc.). Clicking YES will erase my HD? I'm terribly afraid. I need to get this thing installed so I can do my operating systems class work, but I don't know if I did the installation correctly so far and especially, what to click at this point. Can someone help me out please (I spent 4 hours on this one today. "I have no one else to ask)? Finally, the installation is almost done after this step?

  Any help at all would be so greatly appreciated.

  I do not use Fusion, but I have VMware Workstation on Windows. I went through the same process that you went through. The answer to your question is that when you choose the operating system you install and you choose the option for the installation disc, it creates a virtual hard drive for you, size 20 GB. When they ask you to erase the hard drive, it's clear that virtual you create, not your actual computer hard drive. You can check by looking at the properties of the hard drive on your computer. It's probably 250 GB or 500 GB or something big like this. The CentOS WARNING speaks of a 20 GB hard drive, which is the size of the disk that VMware Fusion (and Workstation) create for CentOS.

• Need help: the CS5.5 Install Exit Code: 7

  So I just tried to install CS5.5 Production Premium, but something went wrong:

  (I have read the resolution of problems and I followed the step to fix something with Adobe AIR... "But the installation just doesn't work).

  Exit code: 7

  -------------------------------------- Summary --------------------------------------

  -1 fatal Error (s), 4 (s), 12 warning (s)

  WARNING: DS013: Payload {CB04D8E1-7B9C-4F35-B2E2-E87CBE520805} Adobe After Effects CS5.5 10.5.1.0 is already installed and the load of the session {C0329E33-DEB4-48D9-B7B6-19493A6F062E} Adobe After Effects CS5.5 10.5.0.0 has no connection to upgrade/conflict with it.

  ERROR: DS013: check the integrity of the payload: failed with code 1

  WARNING: DW020: Support for Adobe After Effects CS5.5 {7CAD45EF-24AD-4281-9236-7F8DDB0B9538} 10.5.0.0 comes into conflict with: Support for Adobe After Effects CS5.5 {2AA103A5-6A5F-4840-B332-9B9F8A4BFA96} 10.5.1.0

  Please uninstall these products, restart your computer and run this installer again.

  WARNING: DW020: NOTE: do not set the useful load {7CAD45EF-24AD-4281-9236-7F8DDB0B9538} Support for Adobe After Effects CS5.5 10.5.0.0 as contradictory support is installed.

  WARNING: DW020: {C2F8BD34-1692-40F9-BA1B-1CFB2B5FED3A} Adobe After Effects CS5.5 third party content Wrapper 10.5.0.0 comes into conflict with: {A2D53852-D9A3-44B6-8072-427E5533F84F} Adobe After Effects CS5.5 third party content Wrapper 10.5.1.0

  Please uninstall these products, restart your computer and run this installer again.

  WARNING: DW020: NOTE: cannot set the payload {C2F8BD34-1692-40F9-BA1B-1CFB2B5FED3A} action Adobe After Effects CS5.5 third party content Wrapper 10.5.0.0 as contradictory to support is installed.

  WARNING: DW020: {EA0F99EE-E5DB-4C23-B77E-DB31DA03072F} Adobe after effects CS5.5_AdobeAfterEffects10.5de_DELanguagePack 10.5.0.0 comes into conflict with: {39A36FBE-6CC1-4815-8F68-123D95704DB6} Adobe after effects CS5.5_AdobeAfterEffects10.5de_DELanguagePack 10.5.1.0

  Please uninstall these products, restart your computer and run this installer again.

  WARNING: DW020: NOTE: cannot set the payload {EA0F99EE-E5DB-4C23-B77E-DB31DA03072F} action Adobe after effects CS5.5_AdobeAfterEffects10.5de_DELanguagePack 10.5.0.0 be contradictory of charge is installed.

  WARNING: DW017: PayloadPolicyNode.SetAction: SUPPORT {7CAD45EF-24AD-4281-9236-7F8DDB0B9538} Support Adobe After Effects CS5.5 10.5.0.0 is required by {C0329E33-DEB4-48D9-B7B6-19493A6F062E} Adobe After Effects CS5.5 10.5.0.0 but is not free. Reason: This payload is in conflict with something installed

  WARNING: DW017: PayloadPolicyNode.SetAction: Adobe After Effects CS5.5 {C2F8BD34-1692-40F9-BA1B-1CFB2B5FED3A} SUPPORTED third party content Wrapper 10.5.0.0 is requested by {C0329E33-DEB4-48D9-B7B6-19493A6F062E} Adobe After Effects CS5.5 10.5.0.0 but is not free. Reason: This payload is in conflict with something installed

  WARNING: DW031: payload: Adobe XMP panels CS5 3.0.0.0 {6A2E619B-E4AC-433B-A648-D458CE543A96} has been updated and has been selected for repair. The {5C0FEBDA-5A0E-4FC8-91CB-229A4C1561E9} patch Adobe XMP panels CS5_3.1_AdobeXMPPanelsAll 3.1.0.0 are uninstalled now.

  WARNING: DW031: payload: camera profiles Installer 6.0.0.0 {3F023875-4A52-4605-9DB6-A88D4A813E8D} has been updated and has been selected for repair. The {A189C479-C7CD-4E08-8CCF-D999B68C0C71} patch camera profiles Installer_6.3_AdobeCameraRawProfile6.0All 6.3.0.0 are uninstalled now.

  WARNING: DW031: payload: Photoshop Camera Raw 6.0.0.0 {37AB3C65-E02C-4DCF-B0E0-4C2E253D8FA3} has been updated and has been selected for repair. The {FD58D99B-9927-4226-8E00-959A4F76BD89} patch Photoshop Camera Raw_6.3_AdobeCameraRaw6.0All 6.3.0.0 are uninstalled now.

  ERROR: DW020: found payload conflicts and mistakes:

  ERROR: DW020:-Adobe After Effects CS5.5 depends on Adobe After Effects CS5.5 third party content Wrapper must be installed.

  ERROR: DW020:-Adobe After Effects CS5.5 depends on Support of Adobe After Effects CS5.5 to be installed.

  FATAL: DW020: conflicts were found in the selected payloads. Stop the installation.

  -------------------------------------------------------------------------------------

  Thanks in advance!

  BTW: the installation program always creates a new "Application"-folder with an Adobe file inside. ""

  You can run the Cleanup tool to remove the pre-release build if, who seems to be in conflict with the GM version, and then try to install the version CS5.5 GM.

• Auto filling of a field

  I want to write a script where I enter a "revised" Date and the "Date" field is filled automatically for a date 180 days later. How to achieve this?

  One approach is to use a validation script customized to the revised Date field which defines the value of the field next deadline. Something like:

  (function () {}

  Do nothing if this field is empty

  If (! event.value) {}

  return;

  }

  Get a reference to the other field

  var f = getField ("next Due");

  Convert the value of this field (a string) to a date object

  Kai var = util.scand ("mm/dd/yyyy", event.value);

  Add 180 days

  oDate.setDate (oDate.getDate () + 180);

  Value in the other field to the corresponding date string

  f.Value = util.printd ("mm/dd/yyyy", anyway);

  })();

  You can instead use a custom for the "next deadline: field calculation script

  Custom calculation script for the field "next deadline."

  (function () {}

  Get the value of an input field

  var sDate = getField("Date_Reviewed").valueAsString;

  Clear this field if the entry is empty

  If (! sDate) {}

  Event.Value = "";

  return;

  }

  The value of this field (string) converted to a date object

  Kai var = util.scand ("mm/dd/yyyy", sDate);

  Add 180 days

  oDate.setDate (oDate.getDate () + 180);

  Set the value of this field

  Event.Value = util.printd ("mm/dd/yyyy", anyway);

  })();

• Helps the query using case and County

  Hello!
  
  I have problems with a small part of a query below that finally can settle the invoice price.
  
  (count (distinct spm97.sample_id) * 36.1) as "PROFILE."
  case count (distinct spm33.sample_id)
  When (count (distinct spm97.sample_id) = 0) then (count (distinct spm33.sample_id) * 26)
  another (count (distinct spm33.sample_id) * 4.75)
  put an end to 'CC ',.
  
  The first line works - 0 or 36.10 is returned depending on whether or not a profile has been ordered for the sample.
  
  The cost of CC is 4.75 if a profile was also sentenced, if it isn't then the cost is 26. The case statement is supposed to verify this and return the exact amount, but I can't make it work... I get the error message that a closing parenthesis is missing somewhere in the middle of line 3, if that helps.
  
  Any advice would be much appreciated! Of course, this isn't the entire query - joins and all are all working well, it's just this little section with the County that I can't just.
  
  Thank you
  
  JO

  the piece of code below, seems to me is incorrect

      CASE COUNT(DISTINCT spm33.sample_id)
          WHEN
              (
                  COUNT(DISTINCT spm97.sample_id) = 0
              )
          THEN (COUNT(DISTINCT spm33.sample_id) * 26)
          ELSE (COUNT(DISTINCT spm33.sample_id) * 4.75)
      END AS "CC"
  

  It seems that the requirement here is that if * 'COUNT (DISTINCT spm97.sample_id) = 0' *, then * "CC" * should be ' COUNT (DISTINCT spm33.sample_id) (* 26) "ELSE, it should be" COUNT (DISTINCT spm33.sample_id) (* 4.75)»
  If this is the case, the statement must include:

      CASE COUNT(DISTINCT spm97.sample_id)
          WHEN
              0
          THEN (COUNT(DISTINCT spm33.sample_id) * 26)
          ELSE (COUNT(DISTINCT spm33.sample_id) * 4.75)
      END AS "CC"
  

• Do not display 0.0% as a response to the field calculated

  My field is formatted to % and one decimal place and it show 0.0%.  I would have preferred that it be blank until the two fields are filled, that produce the answer.  I tried to do that with the following calculation and it works until I changed the format of percentage.

  var v1 = + getField("Tons_UsedRow1").value;

  var v2 = + getField("Tons_RequiredRow1").value;

  If (v1! == 0 & & v2! == 0) {}

  var result =(v1 / v2);

  Event.Value = result;

  } else {event.value = ";}}

  Only a digital format of field with currency symbol or percentage symbol and view a null value.

  You use the built-in formatting to Acrobat JS functions to set the field size according to need.

  I would start by the field formatted to 'None '.

  The user you custom calculation script.

  Add custom validation script:

  nDec var = 1; set the number of decimal places; number & percent;

  var sepStyle = 0; style of thousands separator; number & percent;

  var negStyle = 0; negative style; number only;

  var currStyle =""; always null; number only;

  var strCurrency = ""; currency symbol; number only;

  var bCurrencyPrepend = false; prefix of currency; number only;

  var bPercentPrepend = false; percentage of prefix; percent only;

  If (event.value == 0 | event.value == "") {}

  Event.Value = "";

  AFNumber_Format (nDec, sepStyle, negStyle, currStyle, strCurrency, bCurrencyPrepend);

  } else {}

  AFPercent_Format (nDec, sepStyle, bPercentPrepend);

  }

• I cannot select the names of the fields calculated field options. When I try to use the simplified field Notation: change, there is no "OK" button after typing my calculation. Why I don't see these features. I have Adobe Acrobat XI - v11.0.13

  I have Acrobat XI and I'm not able to create calculated fields. When I use the value matches the section, then click on choose to select the fields, it does not select unique fields. I can click Select all or deselect all the... but that's all. So I tried using the simplified field notation and click on modify... the Java script box opens. I can type the script... but there is no options down to say OK or cancel. I don't see any of these options. Why I use this feature?

  Kimberly

  To select a single item from list click on it and then press the SPACEBAR.

  The other question is very strange... Try to run a repair installation.

  On 27 October 2015 14:06, "kimberlyf63795453" [email protected]>

• HP 50 g RPL program to list the factors needing help the formatted output; Matrices, vectors, lists, etc.?

  Hello

  I have not always perfer the output of the DIVIS HP 50 g.

  DIVIDED lists all the factors of a number in a way that is ineffiecent and confusing when there are many factors of a given number.

  For example, when you run 1000 DIVIS you are treated to a large "block" of numbers organized vertically in such a way that only 4-5 of the 16 factors of 1000 are still visible to you without additional keys.

  I'm trying to create a program that simply formats the output of DIVIS differently when there are a lot of factors for a given number. I'm a newbie to the USER RPL. I have the factors that come out a while loop in this format. (100, 10) Unfortunately, my time loop depends on these factors enters NOT the battery until AFTER he calculated all the. I need to find a way to store a set of factors by the execution of the loop in a kind of variable, and then remind each other both on the stack at the end of the program execution. If the code is necessary for you to see, I can post it. The problem is that it is unclear how many factors will be present at this stage. It will be the original number / 2 because I have through each pair of factor in jurisdiction parens with R-> C. In addition, the capture method must be in the loop because that if it is not the loop won't work correctly because the method by which he organized the factors in their concerned couples depends on a process of battery undisturbed during the execution of the loop. Leaving the parens at the bottom of the battery causes there are an odd number of factors in the stack, which invalidates my program for various reasons. In addition, it would be useful to include a function that could test whether or not the number of factors of an odd number, because I will need to include separate code for this. I don't know any such function in USER - RPL, but I am a beginner in this area. Thanks for any help!

  Zekelegge

  Ranothil wrote:
  (...)

  For 1000, my dream program would output;

  (...)

  Try this:

  ' DUP DIVIS SWAP ON / SWAP R-> C EVAL.

  or:

  "DIVIS DUP DUP SIZE 2 / 1 SWAP SUB DUP UNROT / R-> REVLIST C EVAL.
  
  

• I forgot the password need help cant closed system don't remember log in password just changed and simply forgotten! Help, please...

  OS Vista sp 2 IE 8

  I just changed my password, log and I can remember? Help!

  http://support.Microsoft.com/default.aspx/KB/189126

  "Microsoft's strategy concerning lost or forgotten passwords"

  Microsoft cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features.

  http://social.answers.Microsoft.com/forums/en-us/w7security/thread/39f56ef0-5d68-41AD-9daa-6e6019c25d37

  Read theBANNING of cracking of passwords information tools information provided in these forums in the thread above posted byBill fill MSFT, moderator

  See you soon.

  Mick Murphy - Microsoft partner

• Need help the NM-CIDS upgrade on Cisco 3845 router.

  Can someone tell me all the files I need to improve my 5,0000 E3 to E4 6,0000 ID?  I think I should be able to do with the material that I currently have.  I do not have the resources to upgrade the router or the module NM-CIDS.  I want to update the E4 because it seems that Cisco is no longer put signatures for E3.  Documentation, I read that I should at least the Image of the system, the Service Pack, the recovery Image and update engine files.  I see several different times with a GOAL in the file names naming convention.  I'm not sure what I will need the names of specific files.

  A screenshot of version see is lower.

  See the version
  Application partition:

  Cisco Intrusion Prevention System, Version 5,0000 E3

  Host:
  Domain keys key1.0
  Definition of signature:
  Update of the signing S479.0 2010-03-19
  Virus update V1.4 2007-03-02
  OS version: 2.4.30 - IDS-smp-bigphys
  Platform: NM-CIDS
  Serial number: FOC11014468
  License expires: August 14, 2010 UTC
  Sensor time is 17 days.
  Using 509292544 bytes of available memory (79% of use) 403263488
  system uses 17.7 M off 29,0 M bytes of disk space available (61% of use)
  the application data uses 34.1 M off 174.7 M bytes of disk space available (21% of use)
  start using 39.1 M off 75.9 M bytes of disk space available (54% of use)
  Application log using 532,3 M off bytes of 2.8 G of disk space available (20% of use)

  MainApp N-2008_JUN_06_02_35 (release) 2008-06 - 06T 03: 23:18 - 0500 Running
  AnalysisEngine NO-2008_OCT_16_22_05 (release) 2008-10-16 T 22: 30:37 - 0500 Running
  CLI-N-2008_JUN_06_02_35 (release) 2008-06 - 06T 03: 23:18 - 0500

  Upgrade history:

  * IPS - GIS - S478 - req - E3 18:12:38 UTC Monday, March 22, 2010
  IPS-GIS-S479-req - E3.pkg 14:00:57 UTC Friday, March 26, 2010

  Version 1.1 - 5, 0000 E3 recovery partition

  You only need the IPS - K9 - 6.0 - 6 - E4.pkg file.

  Put it on an FTP server and jump on the sensor CLI and run this command:

  upgrade ftp: / / (user name) @(ipaddress of your ftp server)//(directory, if any)/IPS-K9-6.0-6-E4.pkg)

  -Bob

• Need help: the Portfolio does not open in my browsers

  I discovered a portfolio that opens in Internet Explorer (v.10.0) but the same portfolio does not open in Chrome (v.42.0) or Firefox (v.37.0.1) - rather only the cover sheet appears. I have Adobe Reader 11.0 and XI of Acrobat Pro installed. Are there special browser settings that I need to put? Thank you.

  Hi Steve, thank you very much for your answer. I have Adobe Reader XI and Adobe Technical Communication Suite 5 installed. But depending on your response, I found these instructions on the activation of the viewer Adobe Acrobat or PDF Reader for Firefox and Chrome. Here is the link: https://helpx.adobe.com/acrobat/kb/pdf-browser-plugin-configuration.html

  Work instructions, so I'm marking this as resolved issue.

• Need help: the Get method call / EOImpl

  Hi refugees,

  Gud morning question,.

  I have two classes of EOImpl,

  As I am new to OFA, I am facing problem while

  calls the method to accessor Get EOImpl one in the other accessor method Set EOImpl...

  Can we call that?

  Requirement: I have two EO with the column Header_Id

  I have to give the same value in both columns

  In the first EOImpl class, I used the sequence in the Set accessor method.

  Now, I have to call the accessor method Get EOImpl first in the second accessor method Set EOImpl...

  Please give your valuable suggestions...

  Thank you

  Jaya

  Hello

  You can set the value of EO header_id 2nd in your AMImpl.

  While creating the line for the 2nd VO, get the value of header_id 1 VO and the use of the row.setHeaderId () value before VO.insertRow.

  Sushant-

• Need help, the battery icon

  Hello:

  My battery icon currently the percentage of battery left, how I can change to show the time left of my battery? My laptop is ENVY15.

  Thank you

  In laptop HP with Vista and Windows 7, the icon shows only the percent of the battery power.

  Try >BatteryCare