Need help to register for cisco CP-6941 / CP-8941 with Asterisk Server

Go HERE.

Tags: Cisco Support

Similar Questions

Need help finding drivers for W7 for HP Pavilion a6220n

I plan to upgrade my HP Pavilion a6220n Vista 32 bit to Windows 7 Home Premium 64 bit.

I need help to find the drivers for W7. When I go to HP driver download page and select the OS W7 since the menu drop-down it does list all the drivers, could someone provide me a link where I can find all the drivers W7 please?

I heard that we can use Vista to W7 drivers, is it possible?

Any help would be greatly appreciated.

Hello:

Yes, you can use the drivers Vista for your PC, and it should work fine.

After have connected you to the internet, windows update will download all drivers windows 7 that may be more current than the vista ones.

DO NOT under any circumstances to Flash BIOS after installing Windows 7, or you may damage your PC most likely permanently (as in kill him).

If you find that you need to update the BIOS, do so now with Vista installed.

Paul

Need help finding parts for upgrading pc?

Hi I want to upgrade my pc and I know this is old, but I need help to find parts I want to improve everyting.

Here is my pc (hp media center m7260.se desktop pc units). Please I need help.

Yes, this processor will work with the material. "But the opinion States: currently, item can be shipped only within the United States.

Did you read the links (information and motherboard) that lasvegaswireman posted for you?

Micro-ATX: 24.4 cm X 24.4 cm

Buy a new motherboard will automatically end the use of the current operating system (ie the XP OS).

Hi need help of mixture for dissemination, Adtoox Norway

Have little experience sound mixing, and need help in the right understanding of these specs:
PPM peak value
+ 4.0 dBu (-14,0 dBFS) PEAK of Maximum sampling -7.0 dBFS Leq loudness Must be of-22,0 to-17,5 dBFS
How I understand it, is that the global PB should be under - 14, but there could be a peak of-7?
Thank you

PPM peak value
+ 4.0 dBu (-14,0 dBFS) PEAK of Maximum sampling -7.0 dBFS Leq loudness Must be of-22,0 to-17,5 dBFS

How I understand it, is that the global PB should be under - 14, but there could be a peak of-7?

It's a slightly unusual specification has been given to you here! Unfortunately there is no simple explanation of-figure Leq is a weighted equivalent volume level and does not have "peaks" as such at all. In addition, strict, there must be a period of time attached to it, but I think that they have renounced it and said that it applies only to the total duration of your program. What would be more useful would have been loudness ITU specification - R (1770-2 BS) indicated in LUFS - hearing can measure this directly.

Anyway, all this is a bunch of total uselessness. The idea is that the sound levels of the program should be kept within limits determined that people must keep setting levels of volume on their televisions or radios. Guess what? It does not work! Even with the broadcasters who respect carefully the specifications - such as the BBC - you always get big enough to be irritating variations. They do it for me every Monday evening on BBC2, for example...

But this isn't just a mouth shot - the most useful thing I can do is give you a link to the BBC document that explains this as clearly as possible. If there are parts that you still don't understand, go back and ask.

downloads.bbc.co.uk/rd/pubs/whp/whp-pdf-files/WHP202.pdf

Accidentally, I purchase an upgrade when I was trying to buy Acrobat Pro. I need help in Exchange for the upgrade to what I need.

I can't find a certain number of support the customer to solve this problem.

You can contact the Support from Adobe using link below:

Contact the customer service

[Click on always need help button and select the Chat option]

Need help in order for recovery of my Satellite L450 - 16Q

My laptop had a virus so I used the product recovery disc that came with it, thinking that he'll fix it but he eventually forgave all of my computer even windows 7.

So now that I have a computer that I can't use it, I bought windows 7 directly from microsoft that I downloaded and tried to install it but it does not work.
I also bought the product of disks in the backup media on toshiba site recovery in the hope that they will work.

Can anyone help/advise on what I should do.

Thank you
Sharron

Hello

The whole story is a bit confusing for me. So lets see what you wrote:
>... thinking that he'll fix it but he eventually forgave all of my computer even windows 7.
The thought does not. What you need is accurate information about the installation of recovery and that are in the user s manuals document recovery disk is not like Microsoft installation disk and cannot be used for the repair. Recovery disk contains the recovery image and can be used for any new installation OS (recovery image installation) only.
> So now I have a computer that I can not use
Why you can not use? Recovery image installation installs new OS. What operating system is installed after the execution of installation recovery image?
> I also bought the backup from toshiba support site product recovery disks
But why, if you already have recovery disk you used at the beginning of this whole thing?

What you need to do is to use the original disc for installing the OS.
-Start your laptop and press F12 repeatedly to enter the BOOT menu
-When the menu put the recovery in ODD disk
-Select the CD/DVD drive in the menu and press ENTER
-Follow the on-screen menu

After installation of recovery image you will have factory again and everything should be OK.
Any other questions?

HP 15 ac122tu: need help download driver for HP ac122tu windows 7 64-bit

I tried downloding from the HP support page, but some drivers aren't recoginizing and they are not properly install
especially the lan driver do not work when donwloading support page
don't know the reason
can someone help me in this?
Need to link to all the drivers for HP ac 122tu

Hello:

If you have installed the BIOS driver to support 15-ac122tu page, it's fine.

What I was writing, it's not not to install the BIOS or the files of the firmware of the 15 t - ac000 on your model.

The ethernet driver I posted is good for the entire series 15 - ac, including yours.

Need help to search for phrases with wildcards

My application runs through the paragraphs of the text using the user input. I need a way to search using wildcards in words OR phrases.

Example: If my entries of the user "this % that" I would like it matches "Celaque", "thisOTHERthat", and "this other text here that.

Any help is great, but I prefer the suggestions that would work in Java

Search for "this % who" will find "Celaque" and "thisOTHERthat". To find "this other text here that" you must search 'this and that', but you should also use a list of stopwords that does contain no 'this' or 'it '. If you do not specify a list of empty words when creating an index, a list of default stoplist is used. The following shows how to do what you requested using ctxsys.empty_stoplist in the index settings and changing the user input, so that when the user enters "this % that" it seeks "this % one or (this and that).

SCOTT@orcl_11gR2> create table test_tab
  2    (columnName  clob)
  3  /

Table created.

SCOTT@orcl_11gR2> create index test_idx
  2  on test_tab (columnName)
  3  indextype is ctxsys.context
  4  parameters
  5    ('stoplist ctxsys.empty_stoplist
  6        transactional')
  7  /

Index created.

SCOTT@orcl_11gR2> insert all
  2  into test_tab (columnName) values ('thisthat')
  3  into test_tab (columnName) values ('thisOTHERthat')
  4  into test_tab (columnName) values ('this other text here that')
  5  into test_tab (columnName) values ('other data')
  6  select * from dual
  7  /

4 rows created.

SCOTT@orcl_11gR2> commit
  2  /

Commit complete.

SCOTT@orcl_11gR2> variable user_input varchar2(100)
SCOTT@orcl_11gR2> exec :user_input := 'this%that'

PL/SQL procedure successfully completed.

SCOTT@orcl_11gR2> select * from test_tab
  2  where  contains
  3             (columnName,
  4              :user_input || ' or (' ||
  5              replace (:user_input, '%',' and ') || ')'
  6             ) > 0
  7  /

COLUMNNAME
--------------------------------------------------------------------------------
thisthat
thisOTHERthat
this other text here that

3 rows selected.

Newbie needing help. Looking for options of circle on a form.

Hey guys,.
I'm a total newbie to this, but we have been mapping of forms and I need to know how to be able of different options "circle" on a form.
I think that the best way to do it is to have a button that makes an object visible or hidden circle. Currently I figured out how to define an object as hidden and do appear on click of a button, but do not make it back to hidden if the button is clicked again. Several times, it's just a case of yes/no type, but sometimes there are cases where, I have several options where only one can be selected and I wish I could click and circle the appropriate type.
An example:
How many cylinders does in your vehicle:
4-6-8
and I would like to make sure that if you click on the 4 it surround the 4 and make sure that the 6 and 8 are not surrounded.
Any help would be appreciated.

You can use a variable to control for this button allows to swap.

For example, use a variable as circleVisible = 0 and circleVisible = 1 do when the button is clicked and the circle is visible.

So you should have something like this, when the button is clicked:

If (cicleVisible == 0) {}

circleVisible = 1

} else {}

circleVisible = 0

}

I have it? :)

Need help in looking for tool

I work as a NetAdmin in a University. We use Windows under license and domain environment. last time I introduced freeware Microsoft Security Essential anti-virus, & this time WSUS 3.0. This has helped me improve my confidence in the superior authority and my reputation in my organization.

Now, I want to introduce any other tool, which should be more valuable but freeware. A Windows license, as prerequisite is acceptable.

help me find more good tool

Check your EULA for MSE - it is not intended for use in the areas and is limited to home and SOHO use.

Ago paid for MS AV for use in areas - with greater maneuverability than MSE - I suggest using or one of the many other ones available instead.

need help bios password for HP Pavilion dv4000

My stop code is 06986, please help! try to connect to my laptop and its not working

Try to diss.

Generic Phoenix xhwsmz

HP/Compaq Phoenix BIOS nhwpd

REO

I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damages that may occur to your system using these services. Please be aware that you do so at your own risk.

Need help deciphering reference numbers Cisco 1841

Hello

We have a customer who is internested in 1841 series router.

We need explanations on the various references to this router. In particular:

Safety boots

CISCO1841-SEC/K9

1841 security Bundle, Adv.Security, 64FL/256DR

CISCO1841-HSEC/K9

1841 bundle w/AIM-VPN/SSL-1, Adv. IP Svcs, 10 SSL lic, 64F / 256D

CISCO1841-T1SEC/K9

1841 security Bundle w / WIC-1DSU-T1-V2, Adv.Sec., 64FL, 256DR

What do all those acronyms in the reference numbers?

What is K9?

Includes a wic T1 with T1 inside part number? If yes ddo other part numbers just include a WIC ethernet for broadband cable/DSL connections?

-Thank you

Brian

Hi Brian,.

Can you please post this question on the Netpro forums?

Thank you very much

Marcos

Need help bridge database for MS SQL Server, error ORA-28546 configuration problems

Dear all,
I'm trying to configure Oracle to MS SQL Server(I don't have admin access to the MS SQL Server) database gateway. When I try to test the dblink connection, I get the following error.
I published select * from dual@xyz;
ORA-28546: initialization of the connection failed, probable Net8 admin error
ORA-28511: interruption of the RPC connection to heterogeneous remote agent using SID = (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST=localhost) (PORT = 1521)) (CONNECT_DATA = (SID = dg4msql)))
ORA-02063: preceding 2 lines of xyz
28546 0000 - ' failed to initialize connection, unlikely Net8 admin error.
My setup is as follows.
1 oracle 11 GR 2 under Oracle Linux 6, the same gateway version is installed on the same server but different base directory.
2 oracle DB base directory is u01/app/oracle/product/11.2.0/dbhome_1, gateway home directory is/u01/gateway.
3. I use the same file listener.ora for db and the entry door.
4. the content of my listener.ora, tnsnames.ora and the initdg4msql.ora is below.
/U01/app/Oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
#(ADDRESS = (PROTOCOL = IPC) (KEY = EXTPROC1522))
(ADDRESS = (PROTOCOL = TCP (PORT = 1522))(HOST = db.abc.com.tw))
)
)
MSSQL =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost) (PORT = 1521))
)
)
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = db.abc.com.tw)
(ORACLE_HOME=/u01/app/oracle/product/11.2.0/dbhome_1)
(SID_NAME = orcl)
)
)
SID_LIST_mssql =
(SID_LIST =
(SID_DESC =
(SID_NAME = dg4msql)
(ENVS = LD_LIBRARY_PATH = / u01/gateway/dg4msql/pilot/lib: / u01/gateway/lib)
(Program name = / u01/gateway/bin/dg4msql)
)
)
/U01/app/Oracle/product/11.2.0/dbhome_1/network/admin/tnsnames.ora
LISTENER_ORCL =
(ADDRESS = (PROTOCOL = TCP (PORT = 1522))(HOST = db.abc.com.tw))
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP (PORT = 1522))(HOST = db.abc.com.tw))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl.abc.com.tw)
)
)
dg4msql =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP) (HOST = localhost)(PORT = 1521))
(CONNECT_DATA = (SID = dg4msql))
(HS = OK)
)
/U01/gateway/dg4msql/Admin/initdg4msql.ora
HS_FDS_CONNECT_INFO=[192.168.0.1]:1433//XIETEST
# replacement connect format is the name of host/serverinstance/databasename
HS_FDS_TRACE_LEVEL = 255
HS_FDS_RECOVERY_ACCOUNT = RECOVERY
HS_FDS_RECOVERY_PWD = RECOVERY
the dblink is created with the following statement.
CREATE DATABASE LINK "xyz.abc.COM.TW".
CONNECT TO ITS IDENTIFIED BY
With the HELP of "dg4msql";
Couple of other things I did to check the above works.
[oracle@db admin] $ ping 192.168.0.1
PING 192.168.0.1 (192.168.0.1) 56 (84) bytes of data.
64 bytes from 192.168.0.1: icmp_seq = 1 ttl = 61 time = 7.61 ms
64 bytes from 192.168.0.1: icmp_seq = 2 ttl = 61 time = 7,41 ms
^ C
-ping 192.168.0.1 - statistics
2 packets transmitted, 2 received, 0% packet loss, time 1818ms
RTT min/avg/max/leg = 7.417/7.516/7.615/0.099 ms
[oracle@db admin] $ tnsping dg4msql
AMT Ping utility for Linux: Version 11.2.0.1.0 - Production on 2013-SEPT-11 10:53:11
Copyright (c) 1997, 2009, Oracle. All rights reserved.
Use settings files:
/U01/app/Oracle/product/11.2.0/dbhome_1/network/admin/SQLNET.ora
TNSNAMES adapter used to resolve the alias
Try to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP) (HOST = localhost)(PORT = 1521)) (CONNECT_DATA = (SID = dg4msql)) (HS = OK))
OK (0 msec)
[oracle@db admin] $ lsnrctl status mssql
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 2013-SEPT-11 10:54:23
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST=localhost) (PORT = 1521)))
STATUS of the LISTENER
------------------------
Alias mssql
Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
11-SEP-2013 start date 10:09:46
Uptime 0 days 0 h 44 min 37 sec
Draw level off
Security ON: OS Local Authentication
SNMP OFF
Parameter Listener of the /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora file
The listener log file /U01/app/Oracle/diag/tnslsnr/DB/MSSQL/alert/log.XML
Summary of endpoints listening...
(DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=127.0.0.1) (PORT = 1521)))
Summary of services...
Service 'dg4msql' has 1 instance (s).
Instance of 'dg4msql', status UNKNOWN, has 1 operation for this service...
The command completed successfully
Obviously, I'd like to get this configuration to work, but I have also a couple other questions about this configuration.
1. for the installation of the bridge, he wants to run the root.sh script. the script root.sh as to what follows.
Enter the full path of the local bin directory: [/ usr/local/bin]:
The 'dbhome' file already exists in the usr. Overwrite it? (y/n)
[n]: n
The 'oraenv' file already exists in the usr. Overwrite it? (y/n)
[n]: n
The 'coraenv' file already exists in the usr. Overwrite it? (y/n)
[n]: n
the above answer is correct?
Thanks for reading.

The strace shows:

2796 open ("/ u01/app/oracle/diag/tnslsnr/db/mssql/trace/mssql.log", O_WRONLY |) O_CREAT | O_APPEND, 0660) = 12

9564 access ("/ u01/app/oracle/product/11.2.0/dbhome_1/dg4msql/admin/initdg4msql.ora", F_OK)

2796 write (12, "2013-SEPT-11 15:02:44 * (CONNECT_"..., 175 ")")

9564 <... access="" resumed="">) =-1 ENOENT (no such file or directory)

2796 <... write="" resumed="">) = 175

2796 close (12

9564 brk (0x14a3000) = 0x14a3000

2796 <... close="" resumed="">) = 0

2796 poll ([{fd = 8, events = POLLIN |}]) POLLRDNORM}, {fd = 11, events = POLLIN |} [POLLRDNORM}, {fd-=-1}, {fd = - 1}]-1, 4

9564 access ("/ u01/app/oracle/product/11.2.0/dbhome_1/dg4msql/log/dg4msql_agt_9564.trc", F_OK) =-1 ENOENT (no such file or directory)

9564 access ("/ u01/app/oracle/product/11.2.0/dbhome_1/dg4msql/log/dg4msql_agt_9564.trc", F_OK) =-1 ENOENT (no such file or directory)

9564 statfs ("/ u01/app/oracle/product/11.2.0/dbhome_1/dg4msql/log/", 0x7fff91f005b8) =-1 ENOENT (no such file or directory)

9564 open ("/ u01/app/oracle/product/11.2.0/dbhome_1/dg4msql/log/dg4msql_agt_9564.trc", O_WRONLY |) O_CREAT | O_TRUNC, 0666) =-1 ENOENT (no such file or directory)

=> so that it always uses the database as Oracle_home House

With this info, I rechecked the listener and saw that you are missing the ORACLE_HOME setting in the dg4msql section of SID. Please correct your entry to mssql_sid to:

SID_LIST_LISTENER =

(SID_LIST =

(SID_DESC =

(GLOBAL_DBNAME = db.abc.com.tw)

(ORACLE_HOME=/u01/app/oracle/product/11.2.0/dbhome_1)

(SID_NAME = orcl)

)

)

SID_LIST_mssql =

(SID_LIST =

(SID_DESC =

(ORACLE_HOME = / u01/bridge)

(SID_NAME = dg4msql)

(ENVS = LD_LIBRARY_PATH = / u01/gateway/dg4msql/pilot/lib: / u01/gateway/lib)

(Program name = / u01/gateway/bin/dg4msql)

)

)

Then please stop and restart the mssql listener and check again.

-Klaus

Need help on Date for report BEEP settings
Hello

I need to add a parameter date in my BEEP report. I used a date parameter on a BEEP report that has one for each grouping, but my RTF report BEEP pattern that has been converted to Actuate do not have a grouping for each, and I was getting an error when I validate the RTF model. Can someone please?

Thank you
see the example of model I sent let me know.

Need help on info for thinkpad x 31/PCI modem and PM device

Guys, I searched in the intenert for awhile, but no luck... Can someone tell me what the power management device and PCi modem is?... And where can I find the driver for PCI modem for think pad x 31.

I need information about the PM device and PCI modem and what is its role?

Hello

A power management driver allows the operating system more precise on how energy is used by the various components of a control computer. Installation it can improve the battery life as well as characteristics related to food, such as the Hibernate and sleep.

A modem driver allows the ThinkPad to use its modem built for various purposes (Internet access dial-up, Fax transmission, etc.).

All the drivers for the ThinkPad X 31 can be found at http://support.lenovo.com/en_US/research/hints-or-tips/detail.page?&DocID=HT072373.

Kind regards

Aryeh Goretsky

Generic Phoenix	xhwsmz
HP/Compaq Phoenix BIOS	nhwpd

Need help to register for cisco CP-6941 / CP-8941 with Asterisk Server

Similar Questions

Maybe you are looking for