DeskJet D1455 is no longer prints * FLASHES POWER LIGHT *.

Similar Questions

• DeskJet 1055: Custom printer printing, Dim. power light and back to normal

  Hello

  I bought this printer in America and I took it with me to Brazil, where I live now.

  The scanner in it works very well, and also the test page prints fine.
  
  But when I try to print my own pictures, he used impression. Its like the printer simply ignores the document. My computer tells me the print job, or sometimes didn't display any status at all in the print list. And the power light fades and returns slowly to normal.

  It has new cartridges, and I can't seem to make it work. Function print and Scan Dr. I have all possible updates and its all supposed to work very well.

  Can you guys please help me? I contacted the support to the Brazil, but told me that I should talk to HP WE.

  Its a shame that the product does not work, this printer has been barely used...

  Thank you

  Hi @Laridk,

  Welcome to the Forums of HP Support!

  I see that you are unable to print to your HP Deskjet 1055 printer. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I understand that the printer is capable of printing a test properly page. This seems to indicate that this isn't a hardware problem and it is more likely to be software related problem.

  Due to the slight dimming, I would like to do a hard reset to see if that will solve the problem.

  • Let the printer and disconnect the printer cable and the wall socket for 60 seconds.
  • Reconnect the power cable to the output of the printer and the wall, and not a surge protector. This ensures that the printer is full on and can help this situation.
  • Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation.

  Please confirm that you have the printer connected to the USB 2.0, rather than a USB 3.0 port.

  In addition, please try the steps in these guides:

  • HP printers -print jobs stuck in the queue (Windows)
  • HP PC - Troubleshooting connections USB (Windows 7)
  • HP printers -printer 'offline' State message (Windows 7)

  In addition, you have regionalized the printer or do you still use the ink cartridges, you bought the United States?

  Here is more information on this topic: HP printers - find and install the cartridges after moving to another country.

  When you need to use ink cartridges purchased at the Brazil. The printer should be regionalized. When this happens, contact HP.

  Contact HP for service in all countries except Asia-Pacific.
  What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:
  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  File number and phone number are displayed.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• Satellite R830 not working - flashing power light

  Hello

  My Satallite R830 lights.

  The power symbol flashes orange 8 times then pauses and restarts. There are 6 quick flashes followed by a longer 7 flash then another quick. The symbol wireless is lit (orange) all the time.

  If I unplug the laptop and remove the battery and hold the restart button for 30 seconds then without taking the battery in the charger stops flashing and the symbol of the power goes to green, until I try to turn it on, it has a fraction of a second where it looks like it is starting then stops and flashing orange again.

  Same thing if I unplug the AC adapter and the battery and then tried the above, but with battery or ac charger.

  I tried with another adapter (same output amp and volt).

  Can anyone help?

  Thank you very much

  Post edited by: sivyer2081

  > 6 quick flashes followed a longer flash 7 and then another a quick

  If the power supply microcontroller has detected an error lamp DC IN sends a blink code.
  The short means 0 and a long time means 1.
  I have your case, that means: 0000 0010

  Because the error code starts with LSB (least significant bit) to read it from behind
  -> 0100 0000 0000 0010-> 40 H (hex)
  Now, you will need to know what means 40 H

  After a few details that I found on the internet, the 40 H could be the fault of S3V output. (S3V voltage is more 3.47V)

  However, such errors are mainly related to the problem of the motherboard (internal circuit problem) and from my point of view of the party only a few replacement may fix this error.

• HP Deskjet 3050 J610 Series. Print out very light in the body of the document, but not on the headers

  Hello.  I just replaced the ink in my printer, but it's not print as before.  I went to setting and tried several ways and still cannot printing be dark enough to read.  When I do AOL mail, the header comes out dark (with to, of, date, etc.), but the body is pale gray.  Would you please help me understand the settings, or how to retrieve the default value?  Thank you so much, I really miss print and hate writing long-hand [under the direction of personal information] 

  Hi Molly9094,

  Welcome to the HP forums!

  I see your message you have a Deskjet 3050, after changing the print cartridge is not as he had before. I'm sorry to hear that, but I will certainly do my best to help you!

  Just to be safe, I would test the hardware of the printer to make sure that everything goes well on the end of the first. If you print a Network Configuration Page does it come in black?

  If you print from somewhere on your computer such as Notepad (Windows) or Text/Edit (Mac) coming out as it should be, or must it also a lot of pale gray?

  Once I know this information can we move forward!

  Hope to hear from you soon!

• HP Deskjet D2460: HP DESKJET D2460 not print and keeps blinking on power light

  the printer does not work. It has not been used for almost 3 years I think but the power button blinks and I just got new ink. I installed the cartridge there properly and the computer recognizes it but it will not print anything. its status says ready, but it will not be printed. What to do help

  Hi @epsbarakat

  I'd love to help you with your D2460. I suspect that the following document will be more useful; Flashing power light.

  This document will guide you through the necessary troubleshooting steps specific to the issue that you are experiencing.

• Reference DELL INPIRON - sense of the power light flashes (4times orange short, 1 long white period)

  My Dell Inspiron 1545 started blinking the power light in the following model:

  4 times orange (fast)

  1 white (slow)

  I installed the software 'My Dell' and a health check. Nothing wrong was found.

  What does flashing power light mean?

  Thank you

  Leo.

  Your battery is endangered.

• HP Officjet Pro 8600: Power light blinking and can't turn on or off

  Printer has power light blink and wll not turn on or off

  [Moved from comments]

  Hi neuserivergirl,

  1. have you made changes on the computer before this problem?

  2. which version of the operating system is installed on your computer?

  What version of the operating system Windows am I running?

  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  You can disconnect the power cable from the plug, and then try to turn on or off.

  It seems to be a hardware problem, I suggest you contact the manufacturer of the printer for assistance on this issue.

  http://WWW8.HP.com/us/en/contact-HP/contact.html

• power light flashing hp deskjet 3940, & do not print anything

  I have windows XP(SP3) on my laptop and HP printer Deskjet 3940. The printer worked fine until now. Now the power light blinks on the printer. There is NO paper jam.
  I uninstalled and reinstalled the driver from HP website. The printer showed ready in the control panel,but as soon as i try to print a document it shows offline and the power light starts blinking. I have cleared documents from the print queue.
  I have tried using different USB ports but no success.
  I have ensured that 'use printer offline" is unchecked.
  I also downloaded and ran HP Print and Scan doctor. It says everything is fine and asked me to print a test page, but nothing happened when I tried to print. Print HP EXPERTS, Please Help! Thank you!
  

  Hi HPuserSJ,

  I just wanted to check to see if the documents of resolution of problems you have been useful.

• DeskJet 932C - the power light is on and the cartridge flashing

  Hello! I know my DeskJet 932C is 'old', but it seems to be in excellent condition.  First time that I had a problem.  The power light is on and the cartridge is flashing.  When I open the cover, the plateau of the cartridge moves to the far left.  The arrow points to the unfortunate color cartridge.  The missed years ago color cartridge.  I use my printer to print B & W, so I've been printing with the empty cartridge in place for years.

  I removed a reinserted the color and B & W cartridges and turn on the power and turns off.  I used the HP print and scan doctor, and it's scan does not have something wrong, I clicked on print a test page, and nothing happens.  The test page is listed as 1 document in the queue.   Status: error - printing.

  The printer has been in its current position on my desk for years.  It was not known of any trauma... None does damage... no power failure.  It's clean.  Has been connected to 4 laptops and uninterrupted service.

  I prefer not to buy a new color cartridge.

  Would appreciate help.  I would like to know what it means and if there is a solution.

  Thank you!

  Focus21

  The printer will perform electrical cartridges to light control and a few other times.  If an error printing can be blocked to avoid damaging the printer.  Clean the contacts of the cartridge as shown in the document here can solve the problem, otherwise you will probably need to replace the color cartridge.  The 932 Deskjet will allow printing with an empty cartridge, but for years, the cartridge may fail electrically and needs to be replaced.

• HP 3845 printer power light flashes

  Power light of my printer keeps flashing and I can't print anything. I ran the HP software troubleshooting, reloaded drivers, turned off and restarted, fired cartridges and checked for jams. NO JOY. Can I get a test page to go to Quebec, but it will not be printed. This all started when I tried to print a form the net. Has not worked since,

  Hey Mics.

  Thanks for the update.  The Deskjet 3845 is a printer function and I have all the information to reset on this model.  If power cycling the printer, uninstall/reinstall, etc. have been unable to solve the problem, it seems to be a hardware problem with a sensor in this printer.

  I recommend a quick test if you have availability.  You have another computer, you can try to connect this printer?  It is possible that the question is one of the queue stuck in this PC information and not a problem with the printer.  If you connect the printer to a different PC and you have the same result, so I suggest looking into replacing the product.

  Contact HP worldwide | HP

  Hope this helps,

  Jason

• HP Officejet Pro K8600: Power light + resume light flashing after printing only one Page

  After trying to print a document of several page, the printer produced a page and then the power light and the resume light (page feed) Flash. I also tried to print multiple copies of a page, but that leads to the same result.

  I can get the lights extinguish by turning printer off then turn it back on. But it will always print that one front page the same lights begin to Flash. I did six times in a row just to print a six page document.

  I went through all the steps in troubleshooting HP software. Not like searching for cleaning print heads, re-seats cartridges, etc., fragments of paper. Nothing seems to work.

  @Bob_Headrick

  Thank you for your response. However, none of the suggestions could solve the problem. ALTHOUGH the light guide troubleshooting that you provided was close to the solution.

  I came across the solution by reading the PDF manual for the printer. On page 77, it describes the power led + resume light flashing. One of the causes for this using EXPIRES of CARTRIDGES of INK, CARTRIDGES RECHARGEES or NON HP CARTRIDGES.

  WARNING: It is important to note that if your printer is still under warranty, DO NOT DO THIS. HP notes in the manual using this substitution can void the warranty against damage caused by the use of faulty ink cartridges, obsolete or not allowed.

  SOLUTION:

  While the power light and button resume flashing, press and hold the power button and press the button repeat 3 times. This replaces the "apparent" internal error message to use the cartridges you have installed. It may also cause a print cartridge alignment page.

  MY OPINION:

  It is important to note the HP cautioned against it, it FIXED MY PROBLEM IMMEDIATELY! I know that the cartridges that I have installed are in agreement. Like many HP owners out there, I take advantage of sales and have stored on cartridges. I guess some may "expires" before you install it. In my view, the idea of "expiring" cartridges also somewhat falls into this column to "How can do us buy more ink?" What kind of market we create where it's cheaper to buy a new printer than to buy a new set of cartridges/toners? BUT it's a slippery slope... let's not go there.

• HP deskjet all-in-one 3630: printing on linux mint

  Hello

  I have a problem with my printer which, when used with windows 10 works fine, but I'm also using Linux Mint cinnamon 17.3 O.S. on my laptop which is my favorite operating system. The problem is that I'm unable to print, or Linux does not recognize this printer model or vice / versa

  The printer is there when I open "Printer" in the Mint menu. But that's all. If I open another window in ' what impression "it shows several documents ready to be printed." But does not print! Although it printed fine on my old desktop running mint "Mate" O.S. (now is no longer in use). I tried to download and install "HPLIP but unsuccessfully someone out there with a solution, it would be greatly appreciated."

  Hi, I tried your suggestion and I now have my installed printer, my printer flash lights but it wont print, I built a 33 print queue jobs... have cancelled their and tried to print a test page, but nothing prints... either by the way, I am pretty new to Linux and I'm on a learning curve steep here.

  Thanks a lot for your suggestion. Will do some research on the web.

• Portege M750 starts no-power light flashes

  I have an orange flash on my power light error code (1 long flash 3 short 1 long 2 short 1 long 1 short)...

  I have to take the power connector on battery and start battery to operate...

  I use image windows 7 Toshiba with all Microsoft updates (now I NEED many to verying reasons so don't grill me again... for example DON 'T SUPPORT MICROSOFT UPDATES blah blah blah)

  What does this code mean and y at - it a Bios Beta above version 3 for these things...

  Any helpful comments would be greatly appreciated...

  Hello

  In short, 0, long ways 1.
  In your case, the binary code is 1000 1001
  Now, we must reverse the binary code because the most significant bit.
  This means that the code is; 1001 0001
  The HEXADECIMAL code means; 91 h

  Error code is 91 h but I n t know what that 91 h means and what role might be affected exactly!

  Eventually it s something wrong with electronic power supply on the motherboard, but only the ASP technician could provide more details
  However, in most cases, the motherboard is affected and needs to be replaced.

  Welcome them

• Taking a long time to power laptop

  Hi all

  My laptop (HP ENVY 17 - j005tx Notebook) when to stop only takes a few seconds, but it can take up to 5 minutes to be able to...

  At first I thought some service or program took a long time to stop, I installed Windows 8.1 SDK Performance Toolkit to try to identify a culprit. run the command "shutdown - traceFlags BASE + DIAG + LATENCY - noPrepReboot xbootmgr-trace" and the generated trace succeffully.

  I noticed that the notbook was restarted in a matter of seconds...

  Anyway, I proceeded to analyze the trace file using the wpa.exe anf program cannot find any program or service taking much time to stop!

  SO, I now understand the operating system Windows stops well even if the laptop is very long take-off power.

  Someone at - it suggestions?  I have installed NVIDIA driver 337.88 and found another thread here where they suspected this version of the driver has not been tested by HP and after they have applied it their judgment of the laptop slower than usual--is this somehting, perhaps to look at...

  I am currently downoading sp63414.exe NVIDIA driver for my laptop - should I uninstall my current driver and applies HP?

  Jim

  Laptop HP ENVY 17-j005tx, HP ENVY 27 - k001a, HP ProLiant MicroServer Gen8 G2020T, HP MediaSmart EX495 Server tilt, HP MediaVault 2020, HP ENVY 120 AiO Printer

  Thank you visruth...

  What I've tried is run "msconfig" and boot into "safe mode", restarted, then stop, stop was back to normal again.

  Then revived "msconfig" disabled all Microsoft Services, judgment and yet all fed off the coast as usual (soon after).

  Then restarted and re-enabled all services using "msconfig".  Disabled the following services, choose these particular that I'm not sure why they should be executed and some do not know what they are...

  

  rebooted and then stop and everything stop and power off was normal...

  It seems that one of these services is at the origin of the power off to take a few minutes...

  I suspect the bluetooth services, GSService, or IconMan_R, or even the genius of Netgear...

  Funny enough I did uninstall netgear genius a few weeks ago and see for some unknown reason, that the Service is still there? Hmm...

  Jim

• HP Deskjet 1051 J410 series: cannot print from HP Deskjet 1051 J410

  I have a HP Deskjet 1051 J410 and cannot print because I updated to Windows 10. I ran the store & under details, he says he detects a problem, but does not say what it is. The printer appears under devices & Printers & said it working properly & has the updated device driver. I have updated the driver from the HP website, but it says driver 1050 instead of 1051. The printer does not appear under Apps > HP anywhere. I removed the

  PRI friendship & reinstalled the HP site I don't have the disk. The USB Port has disappeared after that. So I know that it is not connected to the right port, because it is no longer an option under ports to connect to. A details page of the printer did print at some point, but I can't print from Office, etc. I unplugged the printer from the back & the output. This back in & connected to my laptop HP Presario CQ62 plugged. I restarted my laptop a couple of times. Nothing works. I have also no error message. Can anyone help please?

  Thank you or all of your great suggestions. I ended up doing a repair of Windows 10 installation & that seems to have solved the problem. Thanks again!