Need help to try to "include vector data" when you save an EPS? Anyone?

Similar Questions

• Loss of data when you save it to a file?

  Hello

  I have problems with my data recording. I acquire at 2.5 MHz for 5 seconds and when I view it I don't see 1.2 s data, if you use a single channel, or unless, as 0.4 s data, when getting the 8 channels.

  My vi is attached and also a picture of him. To analyze it, I use "TDMS File Viewer" (PDM - File Viewer.vi):

  Attached, it is also a picture of the file viewer. Check the number of samples (225000) and the time when it was taken (19/11/2008 16:14:30.423) and (2008-11-19 16:14:31.362). With a 2.5 MHz, there should be much more samples than what is there...  The last sample (which was not shown in the photo) is time (19/11/2008 16:14:30.513), only 0.1 s after having begun to acquire data.

  Is the problem with the queue? If this is not the case, why are data not saved?

  Thanks for the help,

  Rafael

  Your consumption (bottom)) thread will be scuttled as soon the producer (top) out of wire. Leave the upper loop kills the queue; Dequeue item returns an error, and writing to a file won't do anything if there is an error on the entry. If all the remaining items in the queue when he was killed are lost. The best way to solve this problem is to add another loop of thread; After your existing while the loop closes, loop with a short (10 msec) delay until the queue is empty (by Get Queue Status). Kill the queue only after all your results have been written to disk.

• Help decide whether to use vector/bitmap when you use createjs to export to html5

  I am using the createjs exporter to create one, click on html5 and explore the application. I am trying to get information on whether to use bitmap or vector for my components I see General information that bitmap create vector and additional memory is CPU intensive (especially on mobile), but I would like to have a deeper understanding so I can make better decisions.  I also see support in the shade and maybe some layer of mixture - and I'm curious to know how performance and impacts.  This project will essentially be a background image with different sprites animating several frames on the screen. Are there cases where I should use for my background image vector - or is this a death sentence for mobile devices? Are there any circumstances where his prefeable to use the vector in my animations?  What is worse on mobile performance - a vector full screen background or a sprite small vector storyboarding?

  I am ready to start this project (which is intended to display in PC and mobile as html5), but I'm trying to decide if its wise to make all of this vector, or just convert everything to bitmap.

  Did someone either give me advice or have existing discussions or documentation you can refer me to?

  Thank you.

  the only way to know if the addition of a function (as shadow) will ruin your app is to try it.

  There is probably no instance where a background image of vector occur so a bitmap image.  but, the bitmap memory requirements must not exceed available memory, and to call something an image background means, the background image is always in the background and its representation in the form of bitmap does not change frequently.

  because it's so much easier to use with flash vectors, you would usually create an app for the most part vectorized (using the cacheAsBitmap and cacheAsBitmapMatrix everywhere, it is useful, but being aware of the limited memory, you can use) and test performance frequently during development.  If the performance is sufficient, you're good.

  If performance is unacceptable, you will need to check you're exceeds the available memory and the loss of cacheAsBitmap, and if you put much strain of the processor using manipulation of vector.

• Need help to stop my Zoom to change when you use the integrated mouse

  I would like to know if anyone has a solution to my zoom change randomly when I use the built-in mouse. Is it possible to block the zoom so it does not change.

  Control the Touchpad settings in Control Panel.  My ASUS Netbook has a 'two fingers' feature that performs the zoom in things like IE and Word and it's pretty easy to operate inadvertently (another feature is two-finger scrolling, which I use frequently).  If your touchpad driver has such a feature, you may need off "awareness", it or turn it off.  Most modern/current notebook computer touchpad drivers have these characteristics, and many are turned on in different, often easy to do unintentionally, average.

  HAL
  --
  HAL Hostetler, TCE
  Engineer senior/UPDATED--MS MVP-Print/Imaging - WA7BGX
  www.kvoa.com - KVOA television, Tucson, AZ.
  Live Hot Licks - www.badnewsbluesband.com

• Need help, of a text field automatically updated when you select menu drop-down.

  I have difficulties to do something not work for me. First off the coast, I'm a newbie at the APEX and I am teaching with APEX 4.0. I am developing a project management application for my Department. On my page, I have a list drop-down project number and the project name text field. I want the name of project to be completed when I select the project number in the drop down box text. someone knows how to do this?

  OK, you will need to use an alias for the display value and the return value as you can see in my code, this is still once using your code:

  select PROJ_NUM||'--'||PROJ_NAME d, PROJ_NUM return_value
  from PROJ_TASKS
  order by 1
  

  -I just added the alias d because you already have an alias of the value returned

• error code 0 x 80070017 data error cyclic redundancy when you save

  I get error code 0 x 80070017 data error cyclic redundancy when you save. Publication solutions (error checking - automatically fix files) have not worked. Help!

  Hello

  1. When you save the backup?

  2A it worked fine earlier?

  This error occurs if the hard disk has errors on this subject.

  I suggest that you run a check disk on drive c and then try the backup.

  You can help solve some computer problems and improve the performance of your computer by making sure that your hard disk has no errors.

  a. open the computer by clicking the Start button, click computer.

  b. click the hard disk you want to check, and then click Properties.

  c. click on the Tools tab and then, under error-checking, click check now. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  To automatically repair problems with files and folders that detects the scanning, select automatically fix file system errors. Otherwise, the disk check will simply report a problem, but not to fix them.

  To perform a full disk check, select search and attempt to recover bad sectors. This scan is trying to find and repair physical errors on the hard drive itself, and it may take much longer to complete.

  To check for errors file and the physical errors, select both automatically fix file system errors and Scan for and attempt recovery of bad sectors.

  d. click Start.

  Depending on the size of your hard disk, this may take several minutes. For best results, do not use your computer for any other tasks while it checks errors.

  
  Check your hard drive for errors

  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  
  Back up and restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

  
  Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.

• "include vector data" greyed out when recording in EPS

  I work in CS5 with Win7.

  
  I have a Photoship file with a dynamic object vector, created originally in Illustrator. I lost the Illustrator file and hope there's a way to get the image of Photoship and Illustrator vector. EPS format and including vector data record seemed a logical way to go, but he doesn't seem to let me do. I am trying the impossible? Is there another magic method, that I could try?

  Thank you.

  ~ Valerie

  EPS format and including vector data record seemed a logical way to go, but he doesn't seem to let me do.

  The vector Smart Objects are represented as pixel data in the file, so there is no saving in eps vector data.

  But as MTSTUNER pointed out one can open the SO in Illustrator or we could use the layer > Smart Objects > export content.

• I get an error code 0 x 80070017 data error cyclic redundancy when you save.

  Original title: Trouble when backup Vista basic

  During the backup, I get this message... Verification of data error: 0 x 80070017 cyclic redunancy. The backup fails. Any advice? Thank you...

  Hi Arctical,

  ·         When you save the backup?

  ·         Has it worked fine previously?

  This error occurs if the hard disk has errors on this subject.

  I suggest that you run a check disk on drive c and then try the backup.

  You can help solve some computer problems and improve the performance of your computer by making sure that your hard disk has no errors.

  a. open the computer by clicking the Start button, click computer.

  b. click the hard disk you want to check, and then click Properties.

  c. click on the Tools tab and then, under error-checking, click check now. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  To automatically repair problems with files and folders that detects the scanning, select automatically fix file system errors. Otherwise, the disk check will simply report a problem, but not to fix them.

  To perform a full disk check, select search and attempt to recover bad sectors. This scan is trying to find and repair physical errors on the hard drive itself, and it may take much longer to complete.

  To check for errors file and the physical errors, select both automatically fix file system errors and Scan for and attempt recovery of bad sectors.

  d. click Start.

  Depending on the size of your hard disk, this may take several minutes. For best results, do not use your computer for any other tasks while it checks errors.

  Check your hard drive for errors

  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

   

  Back up and restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

   

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  I hope this helps!

• Network error [10053]: can not send data when you run a calc in Planning

  Hi gurus,

  I get a network error [10053]: can not send data when you run a calc in a planning application.

  Looking in the newspaper of the App in Essbase server, I found the following:

  [Thu Apr 9 15:37:36 2014] Local/MYAPP / / / 140285871445760/Info (1008108)

  Internal logic error Essbase [1]

  [Thu Apr 9 15:37:36 2014] Local /MYAPP///140285871445760/Info(1008106)

  Exception error log [/Essbase/oracle/Middleware/user_projects/epmsystem1/diagnostic/newspapers/essbase/essbase/app/MYAPPlog00004.xcp] is being created...

  [Thu Apr 9 15:37:36 2014] Local /MYAPP///140285871445760/Info(1008153)

  A core file can be generated in [/Essbase/oracle/Middleware/user_projects/epmsystem1/EssbaseServer/essbaseserver1/app/MYAPP/ESSSVR.] Wed_Apr__9_15_37_02_2014]

  [Thu Apr 9 15:37:36 2014] Local /MYAPP///140285871445760/Info(1008107)

  Exception error log completedmyapp/Essbase/oracle/Middleware/user_projects/epmsystem1/diagnostics/log/essbase/essbase/app/MYAPPlog00004.xcp please contact technical support and provide them with this file

  [Thu Apr 9 15:37:36 2014] Local /MYAPP///140285871445760/Info(1002089)

  RECEIVED COMMAND OF THE UNUSUAL STOP - REQUEST FOR TERMINATION

  My environment is Windows 2008 R2 with Oracle Database and having only Essbase server in a SUSE LINUX box.

  Could someone help me on this?

  Thanks in advance

  We've tracked down the instructions in the calc and the error occurs in two blocks of calc. After the split in two blocks of the calc has no error more.

  Thanks to you all

• How to allow users to include a photograph when you submit a form

  Use Adobe Livecycle Designer ARE Version 8.2.1.3144.1.471865

  There, anyone know how to add the functionality to allow users who fill out a form to include a photograph when you submit the form?

  Thanks in advance for any help.

  Kind regards

  Lola

  Hello

  If you drag an imageField on the page, when the user clicks on this when running, they will be asked to select an image file.

  There is an example in this form: http://assure.ly/j1KdNq.

  There are several examples of image on our site field, but I don't think any of them are put in place for the user to select an image. http://assure.ly/ozrNSO.

  Hope that helps,

  Niall

• I use the helper downloader (ver. 2.2) when you save a video of WWII, during the reading period, I get some equidistant points from the screen and Flash

  I use the helper downloader (ver. 2.2)
  When you save a video of WWII on my Windows 7 Desktop, during the period of the video, I get points at equal distance between the screen and flashing arrow as well. What is the problem with my download?

  [email protected]

  Which may be caused by a problem with the codec that is used by this video and who is not taken care of correctly.

  You can open this video in another video player to see if it works there?

  What kind of video is it?

• Why the last OS update cost me gigabytes of data when you are connected directly to my computer and ISP via Itunes February 29, 2016

  Why the last OS update cost me gigabytes of data when you are connected directly to my computer and ISP via Itunes.  29 February 2016

  While it is connected to ITunes via my Dell system, I was informed of the latest OS update for my IPhone 6.  I decided that the direct connection to the internet would be the fastest way to download and install the software.  During the process I started to have some warning of our AT & T account that I approach the limit of our data plan, then in quick succession, only warnings, said I've reached the limit and then passed in the data, limit charges.  At the time it was done, I had accumulated more than 2 gigabytes of additional data charges.

  Until that point, I was very pleased with the device and confident in the ability to use Wifi and data.  Due to this incident, I became very suspicious of the camera and the huge potential for data overcharges. It is extremely disconcerting as it happened while it is directly connected to the internet using my computer at home.

  Please note that, in the episode my ISP and the computer is remained connected to the WEB with no sign of connectivity issues.

  Someone at - he had a similar experience and understand what went wrong?

  Thanks for your support,

  Jerry

  JerrolK wrote:

  Why the last OS update cost me gigabytes of data when you are connected directly to my computer and ISP via Itunes.  29 February 2016

  While it is connected to ITunes via my Dell system, I was informed of the latest OS update for my IPhone 6.  I decided that the direct connection to the internet would be the fastest way to download and install the software.

  You have chosen the option of direct download, you have received a message of warning from AT & T about it yet.

  He did what you asked it to do.

• HP 50 g RPL program to list the factors needing help the formatted output; Matrices, vectors, lists, etc.?

  Hello

  I have not always perfer the output of the DIVIS HP 50 g.

  DIVIDED lists all the factors of a number in a way that is ineffiecent and confusing when there are many factors of a given number.

  For example, when you run 1000 DIVIS you are treated to a large "block" of numbers organized vertically in such a way that only 4-5 of the 16 factors of 1000 are still visible to you without additional keys.

  I'm trying to create a program that simply formats the output of DIVIS differently when there are a lot of factors for a given number. I'm a newbie to the USER RPL. I have the factors that come out a while loop in this format. (100, 10) Unfortunately, my time loop depends on these factors enters NOT the battery until AFTER he calculated all the. I need to find a way to store a set of factors by the execution of the loop in a kind of variable, and then remind each other both on the stack at the end of the program execution. If the code is necessary for you to see, I can post it. The problem is that it is unclear how many factors will be present at this stage. It will be the original number / 2 because I have through each pair of factor in jurisdiction parens with R-> C. In addition, the capture method must be in the loop because that if it is not the loop won't work correctly because the method by which he organized the factors in their concerned couples depends on a process of battery undisturbed during the execution of the loop. Leaving the parens at the bottom of the battery causes there are an odd number of factors in the stack, which invalidates my program for various reasons. In addition, it would be useful to include a function that could test whether or not the number of factors of an odd number, because I will need to include separate code for this. I don't know any such function in USER - RPL, but I am a beginner in this area. Thanks for any help!

  Zekelegge

  Ranothil wrote:
  (...)

  For 1000, my dream program would output;

  (...)

  Try this:

  ' DUP DIVIS SWAP ON / SWAP R-> C EVAL.

  or:

  "DIVIS DUP DUP SIZE 2 / 1 SWAP SUB DUP UNROT / R-> REVLIST C EVAL.
  
  

• Need help to try the Windows 7 network computers after the plant level and fresh

  I'm having a bad time trying to network Windows 7 computers after a few updates and install fresh is someone as trouble with windows 7? homegroup? IsUP WTF? Tried x

  Hi Bert Primus,

  Welcome to the Microsoft community forums!

  If I understand correctly, you need assistance in networking to Windows 7 computers after the upgrade. I've surely you will help find a solution on the issue.

  1. how many computers trying to network with each other?

  2. what happens when you try to connect to the computer as a whole?

  3. do you get an error message?

  Method 1:

  If you set up a home network in Windows 7, see the article:

  Start here to set up a home network in Windows 7

  http://Windows.Microsoft.com/is-is/Windows7/start-here-to-set-up-a-home-network-in-Windows-7

  See also:

  
  Networking
  http://Windows.Microsoft.com/en-in/Windows7/products/features/networking

  Networking of computers running different versions of Windows

  http://Windows.Microsoft.com/en-in/Windows7/networking-home-computers-running-different-versions-of-Windows

  Method 2:

  To learn more about homegroup in Windows 7, check out the links below:

  What is a homegroup?
  http://Windows.Microsoft.com/is-is/Windows7/what-is-a-HomeGroup

  
  Homegroup from start to finish

  http://Windows.Microsoft.com/en-in/Windows/HomeGroup-help#HomeGroup-start-to-finish=Windows-7&V1H=win8tab1&V2H=win7tab1

  Home Sweet homegroup
  http://Windows.Microsoft.com/is-is/Windows7/help/home-sweet-HomeGroup-networking-the-easy-way

  Provide more information about the issue so that we can help you. Hope this information helps.

• Need help with SQL/PL/SQL for Dates

  Hi Experts - need help with a SQL query.

  I need to insert some date fields in a table called CALENDAR_PERIOD.

  Current data in CALENDAR_PERIOD table with their data types:

  STARTPERIOD (DATE) YEAR (NUMBER) PERIOD_LABEL (Varchar2 255)

  02/11/2014 2014 2014/02/11 SUN

  03/11/2014 2014 14/03/11 MON

  04/11/2014 2014 11/04/14 MAR

  I have to increment above values up to the year 2025. I don't know how to write SQL and increment of these values.

  Ex: My next value should insert: 05/11/2015 2014 11/05/14 WED like that I need to insert data until 12 31, 2025.

  Can you please help me with PL/SQL block?

  Really appreciate your help!

  DB version:

  Oracle Database 11 g Enterprise Edition Release 11.2.0.3.0 - 64 bit Production

  PL/SQL Release 11.2.0.3.0 - Production

  CORE Production 11.2.0.3.0

  AMT for IBM/AIX RISC System/6000: Version 11.2.0.3.0 - Production

  NLSRTL Version 11.2.0.3.0 - Production

  Thank you
  Sandy

  Hello Sandy,

  Maybe something like

  INSERT INTO calendar_period (startperiod, year, period_label)

  SELECT DATE '' 2014-11-04 + LEVEL

  , TO_NUMBER (TO_CHAR (DATE '' 2014-11-04 + LEVEL, "YYYY"))

  , TO_CHAR (DATE '' 2014-11-04 + LEVEL, "MM/DD/YY DY")

  OF the double

  CONNECT BY LEVEL<= date="" '2025-12-314="" -="" date="">

  ;

  ((mais je ne comprends pas pourquoi nous créons une telle table "année" et "period_label" peuvent être calculé à partir de startperiod))

  Best regards

  Bruno Vroman.