Need help understanding checksur results!

Similar Questions

• Need help understanding the results of security analysis.

  My agency has recently started using tool to fortify scanner of HP, which aims to analyze the code of the CF directly, rather than the rendered page.  The scanner always seems to mark our pages for some error when I use the following code (used to create a PDF file on the fly):

  <cfheader name="Content-Disposition" value="attachment;filename=#pdffile#">
  <cfcontent type="application/octet-stream" file="#expandPath('.')#\#pdffile#" deletefile="Yes">
  

  01. is line 299 in my code.

  I'm basically generates a name of file elsewhere on the page that is based on what a user is requested, then using the code above to create a downloadable PDF of this file.

  The error is:

  Manipulation of the header (validating input and representation, stream)

  The myfile.cfm file includes data not validated in a 299 online HTTP response header.  This allows attacks such as the poisoning of the cache, cross-site scripting, cross-user daub, hijacking the page, cookie or open redirect handling.

  I think it is one of two potential problems.

  1. ExpandPath() is exploitable
  2. The scanner is programmed to any variable passed to a Pavilion cfheader tag.

  Any thoughts?

  You need to scope the variable pdffile.  Without a specific scope, it could be overwritten by URL or form variables entrants.  I would try that and then re-run the analysis.

  HTH,

  -Dave

• Need help to export results to csv format script

  Hi guys,.

  Need help, export results to csv can someone help me. Thank you.

  Connect-VIServer test

  $cluster = 'test '.

  $clustername = get-cluster $cluster

  $Clusters = get-View - ViewType ComputeResource |? Name - as $clustername.name

  $Clusters | % {

  $Cluste = $_

  $VMHostsView = $null

  $VMHostsView = get-view $Cluste.Host - name, Hardware Config, property

  $VMss = $clustername | Get - VM

  $HostCount = ($VMHostsView |) Measure - Object). County

  $VMCount = 0 + ($VMss |) Measure - Object). County

  $VMsPerHost = [math]: round (($VMCount/$HostCount), 1).

  $vCPU = 0 + ($VMss: measure-object-sum - NumCPU property). Sum

  $allocatedram = 0 + ($VMss: measure-object-sum - memorygb property). Sum

  $avgrampervm = [math]: round (($allocatedram/$VMCount), 1).

  $pCPUSocket = ($VMHostsView | % {$_.}) Hardware.CPUInfo.NumCpuPackages} | Measure - Object - sum). Sum

  $TpCPUSocket += $pCPUSocket

  $pCPUCore = ($VMHostsView | % {$_.}) Hardware.CPUInfo.NumCpuCores} | Measure - Object - sum). Sum

  $vCPUPerpCPUCore = [math]: round (($vCPU/$pCPUCore), 1).

  $onenode = [math]: tour ((Get-Cluster $cluster |)) Get-VMHost | Select - 1 first | (measure - object - property memorytotalGB-sum) .sum)

  $twonode = [math]: tour ((Get-Cluster $cluster |)) Get-VMHost | Select - first 2 | (measure - object - property memorytotalGB-sum) .sum)

  $onenodepcpucores = [math]: tour ((Get-Cluster $cluster |)) Get-VMHost | Select - 1 first | (measure - object - property numcpu-sum) .sum)

  $twonodepcpucores = [math]: tour ((Get-Cluster $cluster |)) Get-VMHost | Select - first 2 | (measure - object - property numcpu-sum) .sum)

  $totalclusterpcores_failover1 = $pcpucore - $onenodepcpucores

  $totalclusterpcores_failover2 = $pcpucore - $twonodepcpucores

  $TotalClusterRAMGB = [math]: tour ((Get-cluster $cluster | get-vmhost | % {$_} | mesure-objet-propriété memorytotalGB-somme) .sum)

  $TotalClusterRAMFailoverOne = [math]: round (($TotalClusterRAMGB-$onenode))

  $TotalClusterRAMFailvoerTwo = [math]: round (($TotalClusterRAMGB-$twonode))

  $TotalClusterRAMusageGB = [math]: tour ((Get-cluster $cluster | get-vmhost | % {$_} | mesure-objet-propriété memoryusageGB-somme) .sum)

  $TotalClusterRAMUsagePercent = [math]: round (($TotalClusterRAMusageGB/$TotalClusterRAMGB) * 100)

  $TotalClusterRAMFreeGB = [math]: round (($TotalClusterRAMGB - $TotalClusterRAMUsageGB))

  $TotalClusterRAMReservedGB = [math]: round (($TotalClusterRAMGB/100) * 15)

  $TotalClusterRAMAvailable = [math]: round (($TotalClusterRAMFreeGB - $TotalClusterRAMReservedGB))

  $TotalClusterRAMAvailable_FailoverOne = [math]: round (($TotalClusterRAMAvailable-$onenode))

  $TotalClusterRAMAvailable_failoverTwo = [math]: round (($TotalClusterRAMAvailable-$twonode))

  $TotalClustervcpuperpcore_FailoverOne = [math]: round (($vCPU/$totalclusterpcores_failover1), 2)

  $TotalClustervcpuperpcore_failoverTwo = [math]: round (($vCPU/$totalclusterpcores_failover2), 2)

  $newvmcount = [math]: round (($TotalClusterRAMAvailable/$avgrampervm))

  $newvmcount_failover1 = [math]: round (($TotalClusterRAMAvailable_failoverone/$avgrampervm))

  $newvmcount_failover2 = [math]: round (($TotalClusterRAMAvailable_failovertwo/$avgrampervm))

  $afternewvmvcpu1 = $vcpu + $newvmcount

  $afternewvmvcpu2 = $afternewvmvcpu1 + $newvmcount

  $new1vcpupcpuratio = [math]: round (($afternewvmvcpu1/$pCPUCore), 1).

  $new2vcpupcpuratio = [math]: round (($afternewvmvcpu2/$pCPUCore), 1).

  New-Object PSObject |

  Add-Member-pass NoteProperty 'NOMCLUSTER' $clustername.name |

  Add-Member-pass NoteProperty 'TotalClusterHostCount' $HostCount |

  Add-Member-pass NoteProperty 'TotalClusterVMCount' $VMCount |

  Add-Member-pass NoteProperty "of AverageVM / Host" $VMsPerHost |

  Add-Member-pass NoteProperty 'TotalClusterpCPUSocket' $TpCPUSocket |

  Add-Member-pass NoteProperty 'TotalClusterpCPUCore' $pCPUCore |

  Add-Member-pass NoteProperty 'TotalClustervCPUCount' $VCPU |

  Add-Member-pass NoteProperty ' TotalClustervCPU/pCPUCore' $vcpuperpcpucore |

  Add-Member-pass NoteProperty "TotalClustervCPU/pCPUCore after 1 failover" $TotalClustervcpuperpcore_FailoverOne |

  Add-Member-pass NoteProperty ' TotalClustervCPU/pCPUCore after Failvoer 2' $TotalClustervcpuperpcore_Failovertwo |

  Add-Member-pass NoteProperty 'TotalClusterRAMGB' $TotalClusterRAMGB |

  Add-Member-pass NoteProperty 'TotalClusterRAMGB_Failover1' $TotalClusterRAMFailoverOne |

  Add-Member-pass NoteProperty 'TotalClusterRAMGB_failover2' $TotalClusterRAMFailvoerTwo |

  Add-Member-pass NoteProperty 'TotalClusterRAMUSAGEPercent' $TotalClusterRAMUsagePercent |

  Add-Member-pass NoteProperty 'TotalClusterRAMUsageGB' $TotalClusterRAMusageGB |

  Add-Member-pass NoteProperty 'TotalClusterRAMFreeGB' $TotalClusterRAMfreeGB |

  Add-Member-pass NoteProperty 'TotalClusterRAMReservedGB(15%) '. "$TotalClusterRAMReservedGB |

  Add-Member-pass NoteProperty 'RAM available for NEW virtual machines in GB' $TotalClusterRAMAvailable |

  Add-Member-pass NoteProperty 'RAM available for NEW virtual machines in GB after 1 failover' $TotalClusterRAMAvailable_FailoverOne |

  Add-Member-pass NoteProperty 'RAM available for NEW virtual machines in GB after failover 2' $TotalClusterRAMAvailable_FailoverTwo |

  Add-Member-pass NoteProperty 'Allocated RAM by virtual computer on an average' $avgrampervm |

  Add-Member-pass NoteProperty 'NEW virtual machines that can be configured based on the average of RAM virtual computer' $newvmcount |

  Add-Member-pass NoteProperty 'NEW virtual machines that can be configured based on the average of RAM virtual computer after 1 failover' $newvmcount_failover1 |

  Add-Member-pass NoteProperty 'NEW virtual machine that can be provisioned littleboy average RAM per virtual computer after failover 2' $newvmcount_failover2 |

  Add-Member-pass NoteProperty "vCPU/pCore ratio after new VM provisioning with 1vcpu" $new1vcpupcpuratio |

  Add-Member-pass NoteProperty ' vCPU/pCore ratio after new VM provisioning with 2vcpu' $new2vcpupcpuratio

  }

  Get-cluster $cluster | Get-vmhost | % {

  $vmhost = $_

  $VMHostView = $VMHost | Get-View

  $VMHostModel = ($VMHostsView | % {$_.}) Hardware.SystemInfo} | Model object-group | Sort - down County | Select - 1 first). Name

  $VMs = $VMHost | Get - VM #|? { $_. PowerState - eq "Receptor"}

  $TotalRAMGB = [math]: round ($vmhost. MemoryTotalGB)

  $TotalRAMUsageGB = [math]: round ($vmhost. MemoryUsageGB)

  $TotalRAMfreeGB = [math]: round ($TotalRAMGB - $TotalRAMUsageGB)

  $PercRAMUsed = [math]: round (($TotalRAMUsageGB/$TotalRAMGB) * 100)

  $TotalRAMReservedFree = [math]: round (($TotalRAMGB/100) * 15)

  $TotalRAMAvailable = [math]: round (($TotalRAMfreegb-$totalramreservedfree))

  New-Object PSObject |

  Add-Member-pass NoteProperty 'VMhost' $vmhost. Name |

  Add-Member-pass NoteProperty model $vmhostmodel |

  Add-Member-pass NoteProperty Sockets $VMHostView.Hardware.cpuinfo.NumCPUPackages |

  Add-Member-pass NoteProperty Cores $VMHostView.Hardware.cpuinfo.NumCPUCores |

  Add-Member-pass NoteProperty son $VMHostView.Hardware.cpuinfo.NumCPUThreads |

  Add-Member-pass NoteProperty VMCount (($VMs | mesure-objet).) County) |

  Add-Member-pass NoteProperty vCPU (0 + ($VMs: measure-object-NumCPU of the sum).) Sum).

  Add-Member-pass NoteProperty vCPUperCore ((0 + ($VMs | mesure-objet-NumCPU de la somme).)) Sum)/$VMHostView.hardware.cpuinfo.NumCPUCores) |

  Add-Member-pass NoteProperty 'RAMGB' $TotalRAMGB |

  Add-Member-pass NoteProperty 'RAMUsageGB' $totalramusageGB |

  Add-Member-pass NoteProperty 'RAMFreeGB' $totalramfreeGB |

  Add-Member-pass NoteProperty 'RAMUsage %' $PercRAMused |

  Add-Member-pass NoteProperty 'RAMReservedGB(15%) '. "$totalramreservedfree |

  Add-Member-pass NoteProperty 'RAM available for NEW virtual machines in GB' $totalramavailable

  }| Sort VMhost | FT-auto * | Out-String-width 1024

  See the attached script

• Need help understanding syntax

  Hello
  I need help to understand the syntax.

   
  PPRAMImpl am = (PPRAMImpl)pageContext.getApplicationModule(webBean); 

  What is PPARAMImpl?
  
  I know 'am' is a variable. And with pageContext.getApplicationModule (webBean), we try to get the name of AM for this page, then why do we need to add (PPARAMImpl) (webBean) pageContext.getApplicationModule before?
  

   
  For example in plsql , apps.testpkg.mainproc(param1,param2) 
  means 
  schema.packagename.procedurename(parameter1,parameter2). 
  
  So can you explain "PPRAMImpl am = (PPRAMImpl)pageContext.getApplicationModule(webBean)" in that manner? 

   
  pageContext.getParameter(EVENT_PARAM)) 
  
  What is this ? 
  What are the possible values for EVENT_PARAM ? 

  And by the way, I need help on setting a default value for any of my search parameters in a search box.
  Correct me if I'm wrong, that's what I thought
  1 EOImpl have setters and getters for this attribute. So call to the setter in controller and set value, if this is right, then I don't know how to right the code, can you give me some example code?
  or
  2. get the name of the view object, then set the value for it. as viewobject.setattribute (' name of att ', att value'), if this is right, then I don't know how the code right, you can give me a code example?
  
  Thank you
  Sri.

  Hello

  N ° EC are not equal.

  pageContext.getApplicationModule (webBean) return type AM OAApplicationModule.

  It would be nice if your am variable is of type OAApplicationModule:
  OAApplicationModule m = pageContext.getApplicationModule (webBean) / / would be nice.

  But as you use type PPRAMImpl, you need to type-casting that externally by using:
  Am = (PPRAMImpl) pageContext.getApplicationModule (webBean) PPRAMImpl;

  If you are not yet clear, then consult any book of java or google for internal & external type in java cast.

  Sushant-

• WLC2106 - need help understanding wired ports

  At this point, I am really confused about how the WLC traffic bridges.

  When I have my WLC 1 port connected to my wired LAN and the WLC 8 port connected to a 1121, the web interface can see the AP, but endpoint on my local network cannot ping the 1121.  Why is this?  If I connect directly the 1121 to my switch, I can ping without any problem.

  In addition, it seems to affect my wireless LANs to a VLAN different, I need to create a virtual interface for each VLAN on the WLC.  This seems to be a waste of IP addresses, because I want only the WLC for bridge traffic to VLANs and do not have any kind of proxy or routing.  Is it possible to assign a WLAN to a VLAN without creating a virtual interface to this VLAN?

  Hello Larry,.

  answer your questions:

  (1) for the directly AP ping does not, this is due to the bug

  CSCsj33229    Impossible to ping AP directly connected to a controller 2106

  Conditions:

  Access points that are directly related to the 2100 series
  controller ports may not work correctly in a variety
  means:

  -systems on the cable network may not be able to ping to the APs

  -access points may be unable to obtain a DHCP address from an external
  DHCP server

  -l'AP may have communication problems in LWAPP or CAPWAP
  with the WLC, which could result in resetting tunnel

  -If the AP is in RAP mode, it will be unable to bridge LAN
  Packages

  -telnet or ssh to the AP won't work

  Workaround solution:

  Plug the WLC to a switch and the switch access points.

  Note that this bug is due design as WLC 2106 is not full switched ports

  (2) to networks VIRTUAL, that you want to assign you must do one of the following:

  (A) use dynamic interfaces with assign an IP address on the WLC.

  (B) If you don't want to assing with IP interfaces, you can configure the AP as H-REAP.

  and under WLAN-> > advance help REAP H local switching.

  then add REAP: mapping VLAN corresponding to each WLAN (this can be done of wireless-> > access point-> > H-ERAP TAB).

  Note: in the solution 2 - B, the AP must be connected to the trunk port.

  Kind regards

  Talal

  =======

  Please note the answers that you find useful and mark as answer - when is it :-) - so that others can easily find

• Need help understanding domino effect code of different designer

  I hope someone can help me to decrypt this code. I'm a web designer, but I'm working with HTML, PHP, JavaScript, ActionScript not so much. I have a new customer, and they already had a website designed entirely in Flash. Now, they want only some parts of it and the rest in HTML. The problem is that I don't know much about ActionScript and I'm having a hard time finding ways to do what I want.

  See the Web site uses the ripple effect to make images and text as if you were putting your finger in the water - it follows the mouse. So, I want to take 3 small Flash movies off this huge. But when I do, the ripple effect no longer works. Here is the code of the action:

  import flash.display.BitmapData;

  var map1:BitmapData = new BitmapData (900, 600, true, 0xFF0000);

  this.createEmptyMovieClip ("bmp1", 10);
  bmp1.attachBitmap (map1, 0, "auto", true);

  blur of var = new flash.filters.BlurFilter (8,8,5);

  mapPoint var = new flash.geom.Point (0,0);
  var dmfr = new flash.filters.DisplacementMapFilter(map1,mapPoint,1,1,-30,-30,"clamp",0,1);

  this.createEmptyMovieClip ("cont1", 200);
  Cont1._visible = false;

  bmp1.filters = [blur];

  bmp1._visible = false;

  onMouseMove = function()
  {
  var d = cont1.getNextHighestDepth ();
  MC1 var = cont1.attachMovie ("circle", "c" + d, d);
  MC1._x = this ._xmouse;
  MC1._y = this ._ymouse;
  MC1.cacheAsBitmap = true;
  };

  water_effect.onEnterFrame = function()
  {
  Map1.draw (Cont1);
  Map1.draw (bmp1);
  This.filters = [dmfr];
  };
  

  I know I need to change L2 - 900 for all that width and 600 to whatever the height, but that's all I understand.

  If anyone can help, let me know as soon as POSSIBLE. I don't want you to do a job, just maybe at least point me in the right direction.

  Here are these separate clips:

  www.kglad.com/Files/water_effect.zip

• Need help: understanding of the Session Variables

  Greetings-
  
  Maybe I'm just not understand how function of session variables and
  I hope that someone here can help me to do so.
  
  I am trying to establish an auto-dialing for a client process report
  so when a person displays an online report, a number of declaration is
  generated and stored in a variable session and when information
  is submitted, download number of report and the additional information provided
  a database. Everything seems to work as expected, except for this.
  
  I use an application.cfm file to define the session management and to create a
  Report number and set this number to a session variable.
  
  When the person opens the report form page, there is a teaching section
  for their study, followed by a 'Proceed' button to go to the next section of the
  page.
  
  When they click on the "Continue" button, is when the number of report which is held in a
  session variable (application.cfm) should insert in a hidden for later form field
  upload, which seems to happen.
  
  Now for the part that I don't understand. I thought that both a session
  had not expired, the session variable would remain in use and so if
  the report page has been updated (reloaded) of the same session would be variable
  be used.
  
  What I feel, is that whenever the report page is to be regenerated,
  a new report number is loaded in the session variable. I'm not
  understand how to work the session variables? Am I missing some criticism
  piece of coding or point here?
  
  I have included below the structure of folders and files used in the process
  for review.
  
  Thanks in advance for any help to do this work.
  
  Leonard B
  
  ===============================================
  ===============================================
  
  Folder structure
  area/reports
  -area/reports/input /.
  
  Files
  -domain/reports.cfm <-Entry Point for dealing with the
  --domain/reports/application.cfm
  --domain/reports/input/report_form.cfm
  
  ====================
  application.cfm
  
  < name cfapplication sessionmanagement = "yes" ' LanceApp"=
  SessionTimeout = "#CreateTimeSpan (0,0,20,0)" # ""
  applicationtimeout = "#CreateTimeSpan (0,0,2,0) #" >
  
  < cfset DSN = "datasource" >
  
  < name cfquery = "getnumber" datasource = "#DSN #" >
  SELECT report_number
  OF report_numbers
  < / cfquery >
  
  < cfset Session.report_number = #getnumber.report_number # >
  
  < cfif getnumber.recordcount IS 0 >
  < name cfquery = "insertnumber" datasource = "#DSN #" >
  INSERT INTO report_numbers (report_number) VALUES (1)
  < / cfquery >
  < cfelse >
  < / cfif >
  
  < name cfquery = "updatenumber" datasource = "#DSN #" >
  UPDATE report_numbers
  SET report_number = report_number + 1
  < / cfquery >
  
  ====================
  report_form.cfm
  
  < cfparam name = "Button" default = 'Start' >
  
  < cfif #Button # is 'Start' >
  
  < action = "report_numbers.cfm cfform" method = "post" enctype = "multipart/form-data" > "
  < input type = "submit" name = "Button" value = "Proceed" / >
  < / cfform >
  
  < cfelseif #Button # is "Proceed" >
  
  < div style = "padding: 5px 5px 15px 50px" >
  #Session.report_number # < cfoutput > < / cfoutput > < / div >
  
  < / cfif >
  

  Quote:
  Posted by: Leonard B
  Hi Dan,.
  Thanks for the answer, let me clarify what is the goal. This process of numbering
  is a public service organization. The goal is not to create a primary key.
  but to establish a process of sequential numbering to fill online reports that
  can be reset to zero at the beginning of each year.

  I'm certainly open-minded for doing things in a more easy way and if you have a
  easier, I'm all ears or should I say all eyes. However, with the requirement of
  reset the process back to zero, I couldn't get to any other way of
  treatment of the task at hand.

  Thank you

  Leonard B

  "In this case he would stil be easier to run the following code" number "just before you insert your data. What you have said so far, it's the only time where you really need it.

  But if you want to stick with the application.cfm approach, there is a difference in what you say you do and what your code is showing. You say "I checked to see if the session variable has been set and he has been.", but I don't see any if/else logic in the part of your application.cfm code where you set the variable. Remember, the code runs on each page, including request refreshes.

• I need help understanding this English flossmanual, please...

  In http://en.flossmanuals.net/thunderbird/composing-messages/ , under the "Signature Delimiter', the following text is displayed:

  "Signature separator '.

  "When putting a signature in a text based email, a default value"-"(dash, dash, space) is inserted to separate the text." To turn it off for all the identities of your accounts, you can access your Configuration Console and change mail.identity.default.suppress_signature_separator to 'true '. »

  Then he said:

  "It is important to note that remove the signature makes part of the message that you compose."

  What does that mean? Is he referring to remove the signature separator? Or is it a completely new topic - that is to say, referring to the removal of a signature? And if that means removal of a signature, how belongs to a signature deleted 'message '?

  Then the article states:

  "When replying to messages where the signature is placed below your reply, but above the quote, signatures won't be removed if you choose to change identities."
  

  This seems (to me) to introduce all of a sudden more new questions.

  I appreciate deeply the flossmanual was the result of dedicated work, hard from volunteers smart - it's just sometimes interpret the language used. I know not quite perfectly clear sense for someone who is already part of the team of flossmanual, but - alas - I'm not even a coder, let alone developer...

  Thanks for your help!

  Said Maberly

  Thanks for the very quick response, Zenos - I appreciate it!

  You are welcome.

  The separator has been/is used by certain software as a way of knowing which is not essential to the message, so that it can throw following threads - Yes?

  Yes

  By eliminating the separator, my signature is considered part of the text of the email - Yes? Well, I think that it goes without saying I wouldn't hold my signature to be included in any email in which I send you, no?

  It's certainly what most people actually do these days.

  So the the bottom line, for me, would be: if I want to send a signature (mine will be an image only) and do not want to see those '-' indicators of separator, I should be asking TB to remove the signature separator - Yes?

  Yes.

  To me, it seems polite to have two signatures, at least in the business.

  A big give your coordinates to use in a new message and something more discreet for the continuation of the conversations later. Some organizations (including my own employer) short-sighted dating a big gaudy monstrosity that is intended to be used on each message business.

• I need help understanding Time Machine.

  I've got 2 MacBooks, 1 desktop computer Mac G5 and an external HD to 3 TB (Seagate). Can I save all 3 HDs to an external HD? And what will happen if I delete entire folders of an original HD? The backup will keep all those the next time I'm back up? And he keeps them forever?

  Tutorials video, references, etc. you must help my understanding is appreciated.

  Thank you

  Steve

  Here are some basics:

  Use Time Machine to back up or restore your Mac - Apple Support

• Need help understanding this example of Blackberry.

  Link to the official example here.

  I'm trying to understand it. It seems that it creates a screen of the PopupScreen UI class that is built into the RIM. Now where exactly it display this screen?

  Of after what I have read and understood the example doesn't show how to create a popup screen and manage entries, but it does not show how to display it.

  For example, if I have another class that implements the class screen, how I would invoke this PopupScreen?

  Thanks a bunch for the help!

  Only, it shows the implementation of the class of the screen.

  To display this screen, you would 'push' the screen using UiApplicaiton.pushScreen () or UiApplication.pushModalScreen)

• Need help understanding create new network / different subnets for 2nd VM NIC

  I am newer to Vmware and not quite sure that the best way to accomplish the task.  I have a couple of hosts of ESX 4.0 update 1, each host has several physical network connected to the LAN interface cards and iSCSI, vCenter with about 10 mV and each VM has only a single virtual NETWORK adapter for LAN.

  I need to install a new virtual machine with a special application that must be double virtual NICed.  1 NETWORK card must be on the private LAN (e.g. 192.168.10.x) and NIC2 must have a public IP (e.g. 4.2.2.x).  I was going to give NIC2 a private address and NAT through our Cisco PIX firewall, but I am told that causes problems with the application and it must have a public IP address on NIC2.  I now host a card physical NETWORK connected to public physical switch outside the firewall (so I can give him a pub addess).

  I have a physical NETWORK card I booked for this on the Vmware host.  How can I create virtual switch separate from the local LAN, associated with the physical NIC to the virtual switch, assign a range of IP addresses that are associated to the public IP address works (if that's what I do)?  From there on, I think that we would give the real public IP to vNIC2 during the installation of the OS.

  Thanks for any help you can offer.

  Steve

  Welcome to the forums.

  You can add an additional vSwitch and assign the 2nd physical NIC as the uplink. All the networks is done through the vSphere client configuration tab. In the virtual machine settings just add an extra vNIC and connetct for the new vSwitch.

  You should have a look through the information on http://www.vmware.com/technical-resources/virtual-networking/

• Need help understanding formatting

  There is a report that is constructed in the following way:
  

  SELECT tm_minutes
    , productive_hrs
    , logged_hrs
    , productive_hrs-logged_hrs AS variance
    , ROUND(productive_hrs/logged_hrs,2)*100 AS percent_productive
    , CASE WHEN (productive_hrs/logged_hrs) >= 1 THEN 'green' ELSE 'red' END AS class
  FROM 
  (
  SELECT tc_id, SUM(tm_minutes/60) AS tm_minutes 
       , ROUND(SUM(cycle_time/60)+.5,2) AS productive_hrs
  
    FROM tc_load_jobs_tm, tc_load_jobs, load_rates 
   WHERE tc_load_jobs_tm.load_job_id (+) = tc_load_jobs.load_job_id 
     and tc_load_jobs.load_rate_id = load_rates.load_rate_id   
     and  tc_id = :P2_TC_ID
  GROUP BY  tc_id
  ) tc_load_jobs
  , (SELECT tc_id, ROUND(MAX((tc_end_time-tc_start_time)*24),2) AS logged_hrs
    FROM tc
   WHERE tc_id = :P2_TC_ID
   group by tc_id) tc
  where tc_load_jobs.tc_id(+) = tc.tc_id

  It shows that the last column style properly green. I want to apply the same style to the next column to last as well, but I can't understand how he could do it in the first place. I can't see anything in the report model that is special.

  It looks like it could rest on the conditional column formatting method of Tyler . Check the Expression of HTML in the column property.

  If it isn't then you will need to provide more information.

• Need help on the results of a bizarre query...

  Hi guys,.
  
  I need your help
  
  Requirement is:-suppose we have under titles in a single table;
  
  HULK
  THE INCREDIBLE HULK - 2001 (DO NOT USE)
  INVERSE OF HULK
  INCREDIBLE HULK U/A
  BRING ME THE HEAD OF THE INCREDIBLE HULK
  JENNIFER JASON LEIGH, HULK HOGAN
  HULK 2
  BRIDE OF THE INCREDIBLE HULK
  HULK HOGAN, DAVID WILLEY, NATASHA BEDINGFIELD
  THE INCREDIBLE HULK #03 (1979/80)
  HULK HOGAN CELEBRITY CHAMPIONSHIP WRESTLING #01 (2008/09)
  
  
  Now, he must: -.
  
  O/p should be below order without duplicate records
  
  HULK first, then
  
  HULK then %
  
  HULK %.
  
  
  O/p: -.
  
  
  HULK
  HULK 2
  HULK HOGAN, DAVID WILLEY, NATASHA BEDINGFIELD
  HULK HOGAN CELEBRITY CHAMPIONSHIP WRESTLING #01 (2008/09)
  THE INCREDIBLE HULK - 2001 (DO NOT USE)
  INVERSE OF HULK
  INCREDIBLE HULK U/A
  BRING ME THE HEAD OF THE INCREDIBLE HULK
  JENNIFER JASON LEIGH, HULK HOGAN
  BRIDE OF THE INCREDIBLE HULK
  THE INCREDIBLE HULK #03 (1979/80)
  
  
  How can do us using sql query? Is it possible to make a request?
  Or to do table PL/SQL etc.?
  
  There should be no duplicates if you use more than a query or a single query.
  Can you help me?

  tappusingh wrote:

  O/p should be below order without duplicate records

  HULK first, then

  HULK then %

  HULK %.

  Maybe something like:

  SQL> WITH test_tab
    2         AS (SELECT   'HULK' col FROM DUAL
    3             UNION ALL
    4             SELECT   'THE INCREDIBLE HULK - 2001 (DO NOT USE)' FROM DUAL
    5             UNION ALL
    6             SELECT   'REVERSE HULK' FROM DUAL
    7             UNION ALL
    8             SELECT   'INCREDIBLE HULK U/A' FROM DUAL
    9             UNION ALL
   10             SELECT   'BRING ME HEAD OF THE HULK' FROM DUAL
   11             UNION ALL
   12             SELECT   'JENNIFER JASON LEIGH, HULK HOGAN' FROM DUAL
   13             UNION ALL
   14             SELECT   'HULK 2' FROM DUAL
   15             UNION ALL
   16             SELECT   'BRIDE OF THE INCREDIBLE HULK' FROM DUAL
   17             UNION ALL
   18             SELECT   'HULK HOGAN, DAVID WILLEY, NATASHA BEDINGFIELD' FROM DUAL
   19             UNION ALL
   20             SELECT   'INCREDIBLE HULK #03 (1979/80)' FROM DUAL
   21             UNION ALL
   22             SELECT   'HULK HOGAN''S CELEBRITY CHAMPIONSHIP WRESTLING #01 (2008/09)'
   23               FROM   DUAL)
   24    -- " end of test data "
   25    SELECT   DISTINCT col
   26      FROM   test_tab
   27  ORDER BY   CASE
   28                WHEN col = 'HULK' THEN 1
   29                WHEN col LIKE 'HULK%' THEN 2
   30                WHEN col LIKE '%HULK%' THEN 3
   31                ELSE 4
   32             END, col
   33  /
  
  COL
  -----------------------------------------------------------
  HULK
  HULK 2
  HULK HOGAN'S CELEBRITY CHAMPIONSHIP WRESTLING #01 (2008/09)
  HULK HOGAN, DAVID WILLEY, NATASHA BEDINGFIELD
  BRIDE OF THE INCREDIBLE HULK
  BRING ME HEAD OF THE HULK
  INCREDIBLE HULK #03 (1979/80)
  INCREDIBLE HULK U/A
  JENNIFER JASON LEIGH, HULK HOGAN
  REVERSE HULK
  THE INCREDIBLE HULK - 2001 (DO NOT USE)
  
  11 rows selected.
  
  SQL>
  

  Kind regards
  JO

• Pavilion Elite HPE-170 t: need help with the result of a command prompt to Power Options

  I have recently upgraded to Windows 10 in Windows 7.  Like so many thousands of people, I problelms of sleep mode.  Mine will not be auto-sleep.  It has been suggested that I saw to run command prompt: powercfg-applications

  It supposedly will list the items running on your computer which can now be auto-sleep to work.  I tried several times and up to now, I get the same item displayed each time.  This is what is displayed: \device\harddiskvolume2\windows\sysWOW64\svchost.exe (hpqddsvc) is followed by this message: a file delete operation is underway

  My first thought is that if there is an operation to remove file in progress all the time, it's maybe the reason why my computer is not auto-sleep.  If there is someone out there who can shed some light on this situation, I would appreciate the help.

  EUREKA * SOLVED
  

  I found the answer to my problem!  After using the control system: powercfg-query and get the answer: \device\harddiskvolume2\windows\sysWOW64\svchost.exe (hpqddsvc) delete file operation is in progress

  I started looking for whatever it is associated with the answer above.  In the Manager of tasks in respect of the services, I found the name of the file hpqddsvc, with a description of HP CUE DeviceDiscovery Service was running.  When I stopped the task and re-tried in opt power standby mode, it worked correctly.  In the Configuration of the system (by typing msconfig at the run prompt) on the Services tab, I unchecked the box for HP CUE DeviceDiscovery Service and rebooted the computer.  The service is no longer running.

  I'm sure that this Service has been added to my computer when I downloaded the hp.com/support product detection tool .  The tool scans your computer to detect and identify HP products.

  This can be useful to others who have the problem of the auto-sleep I've had.

• Need help understanding function

  I have not created many features, in fact they were all simple. This one, that I am of course is however I never did a function where the where does not reference the variable in the function.
  
  I'm trying to get a count of tasks by project number.
  
  In the protrac_master the pk_proj_master_id of the column must be protrac_detail.fk_proj_master_id.
  
  Compile however no matter what I try I get either a '1' for all the rows returned or "55" which is the total number of rows returned. It's the function:
  

  CREATE OR REPLACE function DEVPROTRAC.f_count_tasks(
      p_pk_proj_detail_id in number
      )
      
  return number
  is
      v_retval    number;
      
      begin
      
          select count(distinct p_pk_proj_detail_id)
            into v_retval
            from protrac_master pm, protrac_detail pd
           where pm.pk_proj_master_id = pd.fk_proj_master_id;
          
        return v_retval;
        
      end f_count_tasks; 

  who should be called as follows:

  select f_count_tasks(pk_proj_detail_id) "Number of Tasks"
  from protrac_detail

  You count the same setting of pass (basically a constant) for each row in your query.

  I think what you want, it's the following:

  CREATE OR REPLACE function DEVPROTRAC.f_count_tasks(
      p_detail_id in number
      ) return number
  is
      v_retval    number;
      begin
          select count(distinct pk_proj_detail_id) -- count the detail IDs
            into v_retval
            from protrac_master pm, protrac_detail pd
           where pm.pk_proj_master_id = pd.fk_proj_master_id
             and pm.pk_proj_master_id = p_detail_id;  -- where the detail id matches the pass parameter
  
        return v_retval;
  end f_count_tasks;