Need help with Audio conditional

Similar Questions

• Need help with the condition join in SQL

  Hi all -
  
  I need to ask for help with this query:
  
  Create table user_tab_col_test (varchar2 (30) from table_name, column_name varchar2 (30), data_type varchar2 (30));
  
  Insert into user_tab_col_test (table_name, column_name, data_type) values ('table1', 'column1', 'varchar2')
  Insert into user_tab_col_test (table_name, column_name, data_type) values ('Column2', 'table1', 'varchar2')
  Insert into user_tab_col_test (table_name, column_name, data_type) values ("Column3", 'table1', 'varchar2')
  Insert into user_tab_col_test (table_name, column_name, data_type) values ('column4', 'table1', 'varchar2')
  Insert into user_tab_col_test (table_name, column_name, data_type) values ("column1", "table2", 'varchar2')
  Insert into user_tab_col_test (table_name, column_name, data_type) values ('table2', 'column2', 'varchar2')
  Insert into user_tab_col_test (table_name, column_name, data_type) values ('table2', "Column3", 'varchar2')
  Insert into user_tab_col_test (table_name, column_name, data_type) values ('table2', 'column4', 'varchar2')
  Commit;
  
  Create table all_cons_columns_test (varchar2 (30) from table_name, column_name varchar2 (30), constraint_name varchar2 (30))
  
  Insert into all_cons_columns_test (table_name, column_name, constraint_name) values ("table1", "column1", "primary")
  Insert into all_cons_columns_test (table_name, column_name, constraint_name) values ("table1", "column1", "secondary")
  Commit;
  
  This is my query and the current result:
  
  Select u.table_name, u.column_name, c.constraint_name
  Of user_tab_col_test u
  Outer join all_cons_columns_test c left
  On (u.table_name = c.table_name
  AND U.COLUMN_NAME = C.COLUMN_NAME
  AND C.CONSTRAINT_NAME IN ('main'))
  order of U.table_name, U.COLUMN_NAME;
  
  TABLE_NAME COLUMN_NAME, CONSTRAINT_NAME
  ------------------ --------------------- ----------------------------
  Table1 primary Column1
  Table1 Column2
  Table 1 Column3
  Table2 Column1
  Table2 Column2
  
  
  Three questions:
  (1) I don't want to return results where table_name = "table1". I can't get this to work.
  (2) is my proper request and this is the best way to return my desired results? For example, I want all of the columns of user_tab_col_test and I want to only display the constraint_name from all_cons_columns_test argument if the argument constraint_name = 'primary '.
  (3) will be the synatx be the same if I need to join a third table to all_cons_columns_test?
  
  Any advice/suggestions are appreciated-
  John
  
  Published by: user703358 on January 11, 2013 20:57
  
  Published by: user703358 on January 11, 2013 21:48

  Hi, John,.

  user703358 wrote:
  Hi all -

  I need to ask for help with this query:

  Create table user_tab_col_test (varchar2 (30) from table_name, column_name varchar2 (30), data_type varchar2 (30));

  Insert into user_tab_col_test (table_name, column_name, data_type) values ('table1', 'column1', 'varchar2')
  Insert into user_tab_col_test (table_name, column_name, data_type) values ('Column2', 'table1', 'varchar2')...

  Thanks for posting the CREATE TABLE and INSERT.
  It is more useful if you post the code that can be run without modification. You did not semicolons after INSERTION instructions.

  Three questions:
  (1) I don't want to return results where table_name = "table1". I can't get this to work.

  What have you tried? Post your best attempt.
  Here's one way:

  SELECT    u.table_name
  ,        u.column_name
  ,        c.constraint_name
  FROM             user_tab_col_test      u
  LEFT OUTER JOIN  all_cons_columns_test  c
                          ON    u.table_name     = c.table_name
                 AND   u.column_name     = c.column_name
                 AND   c.constraint_name IN ('primary')
  WHERE       u.table_name     = 'table1'          --  *****  NEW  *****
  ORDER BY  u.table_name
  ,            u.column_name
  ;
  

  You would not put this condition in the clause; who controls what is considered as a match between the tables, and "u LEFT OUTER JOIN c" means show all lines of u, even if they do not have a match in the c.

  (2) is my proper request and this is the best way to return my desired results? For example, I want all of the columns of user_tab_col_test and I want to only display the constraint_name from all_cons_columns_test argument if the argument constraint_name = 'primary '.

  Basically, this application is very well.
  It displays all the columns of user_tab_col_test; missing data_type. Just add u.data_type to the SELECT clause, or change the SELECT clause

  SELECT    u.*
  ,         c.constraint_name
  

  (3) will be the synatx be the same if I need to join a third table to all_cons_columns_test?

  Do you mean "" * add * one-third * column * to all_cons_columns_test '? "
  It depends on what results you want. Post new CREATE TABLE and INSERT and instructions the results you want new data.
  Most likely, the basic structure of what you've written will remain exactly the same.

• Aspire V5 - 471G just updated Windows 10 Aniversary Edition need help with Audio driver

  I have problem driver Got on my v5 - 471 g ive got everthing operational with the 8.1 except the audio driver windows driver

  Help me!! BTW my laptop has been upgraded to windows 7

  and if you can link me to a page of 10 full for the Acer Aspire V5 windows driver - 471G since the driver on the product page will that until Windows 8.1 btw my laptop has been upgraded to windows 7

  So I installed your driver http://www.realtek.com.tw/downloads/downloadsview.aspx?Langid=1&PNid=14&PFid=24&Level=4&Conn=3&DownT...    version 7.2.8000.17

  but nothing happens now, I search on google and found this

  http://support.Lenovo.com/id/ID/downloads/ds028945 version 7.2.8000.17

  I installed it even if the dolby in the taskbar icon is not but the open control panels > hardware and sound > sound

  Click with the right button on speakers > properties > dolby goto tab > there you go the toggle

  

  now, it sounded better thanks bro for the solution. So basically, what gives you is a driver of all it need is a user interface

• Need help with audio playback by default/current VISTA device

  Hello
  
  I need to get the current audio playback device in VISTA. It is quite easy to XP because I just get this information from the registry. My understanding is that things are different in VISTA. I was told you cannot change the unit but you can get the device using the following...
  
  -CoCreateInstance (IMMDeviceEnumerator)
  -IMMDeviceEnumerator-> GetDefaultAudioEndpoint (eConsole)
  
  Problem is that I don't know what to do with it. I guess it must be compiled with a library (compiler, library, etc...) I do not have)
  
  So... question, is there already a xtra that can get this information OR I can pay someone to do a xtra using the information above?
  
  If you are able/willing to help, please let me know as soon as possible because the project is due next week. I can pay you through paypal.
  
  Thank you!!!
  [email protected]
  

  Gary with Buddy xtra has been kind enough to add to the collection of boyfriend.

  Thanks again Gary Smith!

• Need help with audio sound

  Hello, my sound has stopped working one day to the other & no idea why. When I go to my info to speaker icon it says "No Audio" and the volume control is greyed out so cannot set or click on anything that is.   Anyone would be interested to help me with this remote computer assisstance through please?  Thank you.

  Ilona

  Hello Ilona,

  Thanks for joining us out on Microsoft Community Forums.

  It seems that the sound has stopped working suddenly. We will analyze and identify the cause of the problem.

  He would be grateful if you could answer a few questions to refine the question.

  1. What is the brand and model of the computer?
  2. are you aware of changes to the computer before the show?
  3. do you receive any error messages?

  This problem normally occurs when the audio drivers are corrupt. We will perform some troubleshooting steps and try to resolve the issue.

  Method 1:

  Run the fixit from Microsoft Fixit article and if that helps.

  Diagnose and automatically repair audio playback problems:

  http://support.Microsoft.com/mats/AudioPlayback/

  Method 2:

  If the problem persists, you mast perform the steps described in the article.

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/no-sound-help#no-sound=Windows-XP&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Hope this information helps. Get back to us if you have more queries about Windows.

• Need help with Audio Spectrum Max Height!

  So I have an audio spectrum I want to stop when it gets to a certain height in the computer and not just go on the top and out of sight.

  I thought maybe I could do layer that covers the audio spectrum, but not the other objects in the model.

  Any help?

  Here's and example of what I mean

  https://youtu.be/yiqznDG-uE0?t=25s

  At roughly 0:27 you will see the stops of the spectrum at a certain height and go any higher.

  Snap out with a mask or a linear wipe.

  Mylenium

• Need help with a conditional statement

  OK, I have essentially a text box that gives descriptions when you hover over each button. I do not know how to encode, so far, that's what I have and when I mouse over the 'home' button I see var homeText in the text box, but when I'm not wriggle on I do not see the "else" statement that matches the text empty var.

  My question is how to do the "else" statement to work?

  Description of section text box.
  var empty: String = "INFO SPACE, point to things for a brief description.";
  var homeText:String = "return to the home page.";

  The 'Home' button action.

  var overHomeDes:Boolean = true;

  homeBorder_mc.addEventListener (MouseEvent.MOUSE_OVER, homeDes);
  function homeDes(event:MouseEvent):void

  {
  If (overHomeDes)

  {

  Description.Text = homeText;
  }

  on the other

  {

  Description.Text = empty;

  }
  }

  You will need to create a ROLL_OUT listener for the home button to get him back.  The mouse above machine occue when you hover over the button, it will appear only if, not the other, thw unless boolean is false.

  You won't need this conditional in there, unless that boolean is in another goal.

• Need help with the conditional statement.

  I have a conditional configuration to check the 6 values, and I don't know how to put in place.  I know that the way I have it Setup is wrong, but I'm stuck here after several attempts of other variants.

  LINE OF CODE IN QUESTION:

  If (eventObject.info.name! = "marker2" |) "marker4" | "marker5" | "marker6" | "marker7" | "marker8")

  FULL CODE BLOCK:

  var listenerObject:Object = new Object();
  listenerObject.cuePoint = {function(eventObject:Object):Void}
  If (eventObject.info.name! = "marker2" |) "marker4" | "marker5" | "marker6" | "marker7" | {"marker8")}
  var listenerObject:Object = new Object();
  listenerObject.stateChange = {function(eventObject:Object):Void}
  trace (_root.theVideo.State);
  If {(_root.theVideo.paused)
  mclContinue._visible = true;
  var myTween:TweenLite = new TweenLite (mclContinue,.35, {_alpha:100, ease:Back.easeOut, onComplete:contBtn});})
  } else {}
  var myTween:TweenLite = new TweenLite (mclContinue,.35, {_alpha:0, ease:Back.easeOut, onComplete:contBtn});})
  }
  }
  _root.theVideo.addEventListener ("stateChange", listenerObject)
  }
  }
  _root.theVideo.addEventListener ("cuePoint", listenerObject)

  
  Thank you.

  You are welcome.

• I need help importing audio from a reader audio tapes and then burn it to a cd or dvd. Thank you! __

  I need help importing audio from a reader audio tapes and then burn it to a cd or dvd. We have some old audio cassets with our children and other parents record and want to put them on a CD or DVD media. I can't understand this. Thank you!

  I need help importing audio from a reader audio tapes and then burn it to a cd or dvd. We have some old audio cassets with our children and other parents record and want to put them on a CD or DVD media. I can't understand this. Thank you!

  =================================
  The free Audacity software might be worth a visit:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Audacity
  http://Audacity.sourceforge.NET/

  Features of Audacity
  http://Audacity.sourceforge.NET/about/features

  How to scan discs vinyls, audio tapes and minidiscs?
  http://Audacity.sourceforge.NET/Help/FAQ?s=recording&i=records-tapes

  Transferring tapes and records to computer or CD
  http://wiki.audacityteam.org/index.php?title=Transferring_tapes_and_records_to_computer_or_CD

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Need help with a Hp Papvilion Dv7-1270US, from vista to xp 64

  Well, I noticed that a lot of guys are useful here with installing XP on Vista and yes I'm another unhappy Vista user, I am a graphic designer and let me tell you programs and performance is not very good on my laptop HP that I am ready to go back to XP.

  I have an extra HD a seagate sata 80 GB of my PS3 that I drag never used, so I'll use it to install XP on my laptop

  Its what I need help with drivers, man what a pain. I can install drivers left and right that I know how to do this, but Nlite, manual, unzip its so confusing...

  good so I use Nlite to wake my sata drivers and my installation of Windows XP on my HP I would add something in there like {video card driver} {driver Chipset} etc, what should I put in the wake? and once the wake is done and winxp is installed in what order should I start to install stuff, please guys Im confused and need help if someone can point me in the right direction of the dv7-1270 drivers I would appreciate...

  If I happen to screw up my 80 GB hard drive, not a big deal, blue screen, can not load, etc etc... can I just put my original 320 GB hard drive and back to Vista the way it was. ??? is it possible, which would ease my mind, thank you for your responses and assistance.

  Drivers:

  Chipset Intel, (install and reboot before other drivers) here

  Intel Matrix Storage Manager here

  MS-UAA fo SP2 (required with a reboot before the graphic and Audio driver) here

  MS-UAA fo SP3 (required with a reboot before the graphic and Audio driver) here

  NVIDIA GeForce 9600GT here

   

  Intel Wireless 5100 here

  Bluetooth here

  Realtek RTL8168C Family PCI - E Fast Ethernet NIC here

  Please check first that link written by Joshua Wood and concentrate on problems that may appear when you install the sound card in it.

  IDT High-Definition Audio CODEC Pilot,

  1 sp41693, pilot, work reported in XP here view

  2 SP39671, driver, jobs reported in XP here or here view

  3 sp41698, vista, work reported in here XP driver

  High-Definition Audio (HDA) Modem Installer and driver here

  .NET framework (required before HP Quick Lunch Buttons) here

  HP Quick Launch buttons here

  Synaptic Touchpad here S

  ENE CIR (infrared receiver) here (your Vista driver)

  JMB38X card reader Host Controller Driver here

  HP 3D DriveGuard 1.10 has here

  If you had for 7 unknown devices (buttons drivers), here

  Do a manual installation

  Go to Device Manager, right click on the unknown device,

  Choose update driver, not to communicate.

  Choose the install from a list or a specific location, not search, have-disk,

  Navigate to the location of machine.inf.

  Do it for the rest of the unknown devices

• need help for a conditional query

  guys this is just. as an extension of this post that Frank was helping me. IM reposting because my needs change slightly and im having a hell of a time trying to change the query.
  Here are the previous post.
  need help with query can find data back please help.

  CREATE TABLE "FGL"
    (
      "FGL_GRNT_CODE" VARCHAR2(60),
      "FGL_FUND_CODE" VARCHAR2(60),
      "FGL_ACCT_CODE" VARCHAR2(60),
      "FGL_ORGN_CODE" VARCHAR2(60),
      "FGL_PROG_CODE" VARCHAR2(60),
      "FGL_GRNT_YEAR" VARCHAR2(60),
      "FGL_PERIOD"    VARCHAR2(60),
      "FGL_BUDGET"    VARCHAR2(60)
    )

  data
  

  Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('240055','240055','7600','4730','02','11','00','400');
  Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('240055','240055','7240','4730','02','10','1','100');
  Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('240055','240055','7240','4730','02','10','1','0');
  Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('240055','240055','7600','4730','02','11','1','400');
  Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('360055','360055','7200','4730','02','10','1','400');
  Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('360055','360055','7600','4730','02','10','1','400');
  Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('240055','240055','7240','4730','02','10','14','200');
  Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('240055','240055','7600','4730','02','10','14','100');
  Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('240055','240055','7240','4730','02','10','14','200');
  Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('240055','240055','7240','4730','02','10','2','100');
  Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('240055','240055','7240','4730','02','11','2','600');
   
   

  I need to find the year of greater subsidy for the granting by a period setting.
  Once I found the great year, I need to check the value of the period 14 this grant for the previous year and add it to the amount of the budget for this grant. However if there is an entry in the biggest year for period 00 so I need to ignore the period 14 of the previous year and the current calculation period + (current period - more great year 00)
  
  hope that makes sense, so in other words, with the new data above. If I asking me a second period of the grant year 11. I'd end up with $800
  
  because the greatest year is 11 it contains one point 0 with $ 400, so my total should be
  amount of period $2,600
  period $0 400 - period $2 600 = $200
  
  600 + 200 = $800
  
  If I have question period 1 grant 360055 I'd end up just with 800 grnt year 10.
  
  I tried to edit this query you have provided me with no luck. I tried for several embarrassed day but I'm saying I can just do what im trying to do.
  can you please help me.
  
  
  Here's the query provided by frank kulash who graciously put it together for me.

  WITH     got_greatest_year     AS
  (
       SELECT     fgl.*     -- or whatever columns are needed
       ,     MAX ( CASE 
                   WHEN  fgl_period = :given_period 
                   THEN  fgl_grnt_year
                  END
                ) OVER ()     AS greatest_year
       FROM     fgl
  )
  SELECT     SUM (fgl_budget)     AS total_budget     -- or SELECT *
  FROM     got_greatest_year
  WHERE     (     fgl_grnt_year     = greatest_year
       AND     fgl_period     = :given_period
       )
  OR     (     fgl_grnt_year     = greatest_year - 1
       AND     fgl_period     = 14
       )
  ;

  Miguel

  Hi, Miguel.

  You are waying that when larger year who has: given_period also a period = '00' (or '0', or whatever it is you want to use), then you want to double the budget of the given_period (subtract the '00' budget and do not count '14' year pevious)? If so, add another condition to the CASE statement that decides what you've summarized:

  WITH     got_greatest_year     AS
  (
       SELECT       TO_NUMBER (fgl_grnt_year)     AS grnt_year
       ,       fgl_period
       ,       TO_NUMBER (fgl_budget)     AS budget
       ,       MAX ( CASE
                     WHEN  fgl_period = :given_period
                     THEN  TO_NUMBER (fgl_grnt_year)
                    END
                  ) OVER ()     AS greatest_year
       FROM       fgl
  )
  ,     got_cnt_00     AS
  (
       SELECT     grnt_year
       ,     fgl_period
       ,     budget
       ,     greatest_year
       ,     COUNT ( CASE
                     WHEN  grnt_year     = greatest_year
                     AND       fgl_period     = '00'
                     THEN  1
                       END
                  ) OVER ()          AS cnt_00
       FROM    got_greatest_year
  )
  SELECT       SUM ( CASE
                      WHEN  grnt_year     = greatest_year                    -- New
                AND       fgl_period     = :given_period                    -- New
                AND       cnt_00     > 0            THEN  budget * 2     -- New
                      WHEN  grnt_year     = greatest_year
                AND       fgl_period     = :given_period       THEN  budget
                      WHEN  grnt_year     = greatest_year
                AND       fgl_period     = '00'            THEN -budget
                      WHEN  grnt_year     = greatest_year - 1
                AND       fgl_period     = '14'
                AND       cnt_00     = 0            THEN  budget
                  END
             )          AS total_budget
  FROM       got_cnt_00
  ;
  

  You will notice it is the same as the previous query, I posted, with the exception of 3 lines marked 'new '.

• I'm suddenly needing help with my browser Firefox (6.0.2)

  Hello
  I'm suddenly needing help with my browser Firefox (6.0.2)

  (OS: I use Windows XP).

  When I open the browser, I don't see is a totally white screen of white, with all the toolbars at the top.

  I know that my physical connections are very good: I have tested the modem, turned the pc market etc and I can also receive/send emails.

  This problem started today, September 8, 2011 and has never happened before.

  Is it a coincidence that Firefox itself to day before I disconnected yesterday evening? Could this be something to do with this particular new update?

  I also noticed that just before I "opened" Firefox, I now get a small box indicating:

  [JAVASCRIPT APPLICATION]
  Handl exc in Ev: TypeError: this oRoot.enable is not a function

  This never appeared before - I hope that it offers a clue has what is wrong.

  The browser not be stuck in Mode safe, said by the way.

  Of course, I can't find solutions to the problem on the internet, I don't physically see all Web sites!
  (A friend sends this request in my name from their pc)

  Any light you can throw on this problem of confusion would be much appreciated. I'd rather not have to uninstall and reinstall Firefox if possible.

  If the only option is to uninstall Firefox and reinstall from your site, I'm also in trouble (I can not see the internet or download).
  In this case, would you be able to send the .exe file as an attachment to my e-mail address? In the affirmative, please let me know and I'll give you more details.

  Thanks in advance.

  One possible cause is security software (firewall) that blocks or limits Firefox or plugin-container process without informing you, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox in the list of permissions in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.com/kb/server+not+found
  • https://support.Mozilla.com/kb/firewalls

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions of the origin of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.com/kb/safe+mode

• Need help with installation on Photosmart C7280 all-in-one

  I had my printer is installed and has been using the printer for 3 wireless laptops in my house.  Now, I can't even find my backup drive, so I have need help with downloading the software to use my printer and also get to use wireless.   I don't know what happened, but the fax for this printer is listed, but not the printer itself.   Help, please!

  Click here to download the software for your printer:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=3204785 & LC = on & CC = US & DLC = in & lang = to & CC = US

  has chosen the appropriate operating system that corresponds to your computer and download the full software features.

• HP laptop: need help with internet and search for things

  whenever I'm on chrome internet explore google ect and go to tab it is says unknown error or no internet connection or anything and just takes me chrome ect. I need help with this im involved in a byod class and my computer won't let me on what whatever usually it just starts out black and white and the seeds I my search request

  Yes it's a Windows 10 and it arrived already installed I'll take the other info now

• Need help with the installation of an adapter of Palit GeForce 9500GT Super chart - 512 MB in a M2N68 (narrated

  Need help with the installation of an adapter of graphics Super Palit GeForce 9500GT - 512 MB - DDR2 SDRAM in a M2N68 motherboard (narra6). Should I disable the onboard graphics in the bios? When the card is installed, no VGA work outs and the PC does not start. Checked and recontroler implementation of the card in the PCI slot. PC is a desktop HP G5200uk PC. Windows 7 operating system.

  Hello

  The link below is a guige to install a video card in your Pc.  In particular, it seems that you will have to perhaps specify the location of the new card in the bios and save this change before you install the new card - see step 4 in the guide on the link below.  If your new card fits into the PCI Express x 16 slot, you will need to define PCI Express in the bios and save the changes.

  http://support.HP.com/us-en/document/c01700855

  Kind regards

  DP - K