Need help with drivers on HP Pavilion dv6000 series (8.1 Windows 32 bit)

Hello! Dear Experts, first I want to apologize for my English...

... We're going to start, I have HP Pavilion dv6750ee whith AMD Turion (TM) 64 X 2 Mobile Technology TL-68, 2 GB of SDRAM DDR2, disk FUJITSU HARD MHY2250BH 250 GB, nVIDIA GeForce 8400 M GS 256 MB and Windows 8.1 on board...

Problems:

1. the coprocessor (if I translate it is correct) driver not found

ID

PCI\VEN_10DE & DEV_0447 & SUBSYS_30CF103C & REV_A1
PCI\VEN_10DE & DEV_0447 & SUBSYS_30CF103C
PCI\VEN_10DE & DEV_0447 & CC_0B4000
PCI\VEN_10DE & DEV_0447 & CC_0B40

2. system base of the unit (if I correctly translate) driver not found

ID

PCI VEN_1180 & DEV_0843 & SUBSYS_30CF103C & REV_12
PCI VEN_1180 & DEV_0843 & SUBSYS_30CF103C
PCI VEN_1180 & DEV_0843 & CC_088000
PCI VEN_1180 & DEV_0843 & CC_0880

3 not found base system device driver

ID

PCI VEN_1180 & DEV_0592 & SUBSYS_30CF103C & REV_12
PCI VEN_1180 & DEV_0592 & SUBSYS_30CF103C
PCI VEN_1180 & DEV_0592 & CC_088000
PCI VEN_1180 & DEV_0592 & CC_0880

4 update BIOS (I have the BIOS Phoenix F.34), but BIOSAgentPlus on PhoenixBIOS.com told me that I can update my BIOS where I can take and what version (I can't buy BIOSAgentPlus account)? Help, please!

Ideally, I want my BIOS to support the start-up of the USB Flash drive, now I don't have this feature.

5. I have a HDMI port with the strange situation... when I have Windows 7 on board and connect the TV via HDMI, sound goes to the TV speakers...

But on Windows 8.1 sound Laptop speakers, connected TV, what is the problem?

5. a question about hardware update...

My nVIDIA GeForce 8400 M GS 256 MB video card really have PCI Express and I can turn it off and put in more powerful video card, or there is no PCI Express and if I need to update the video - is a chance REBALL the chip?

Sorry for a lot of questions!

Thank you)

Hello:

You can get the BIOS to support driver page was last updated and your laptop on the link below.

http://h10025.www1.HP.com/ewfrf/wc/product?cc=us&LC=en&DLC=en&product=3664998

I will repeat what I mentioned earlier.

1. There is only a Windows-based flash file.  Only company in the HP PC have BACK base of flash files and there is no way to update the BIOS from a drive, flash or BACK etc.

2. you only need to run the Windows based flash using the operating system support (Windows Vista only).

Any attempt to Flash the BIOS using any other operating system laptop = dead.

The graphics card is soldered to the motherboard and cannot be removed or replaced.  It doesn't matter what said you that any software.  There is no graphics removable 'card' in your laptop.

Tags: Notebooks

Similar Questions

  • I have a mess of error. about microsoft Isatap adapter... plug and play id root\ * Isatap\0002 error tv-configmgrerr31 need help with drivers

    need help with this.is there a link for the drivers. The only changes to my system is a new modom.netgear wireless g54.thank you

    Hello

    (1) what is the complete error message you receive?

    (2) when exactly you get this error message?

    (3) how long have you been faced with this problem?

    You can ignore this error message. This error message does not indicate a problem with the adapter. The adapter will continue to function correctly.

    See the article below

    On a Windows Vista-based computer or on a Windows Server 2008-based computer, the Microsoft ISATAP map appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message
    http://support.Microsoft.com/kb/932520

  • CRAVING for laptop - 17-k201na: downgrade to win 7 need help with drivers

    I can't get windows 8.1 which came installed on my laptop if im reinstalling windows 7 64 bit edition Home premium.

    The thing is drivers!

    Does anyone know of a windows 7 hp laptop that has the same or similar material like mine, so I can get the drivers?

    I ask only that ive seen other people do the exact same advice and help

    Hello:

    Looks like you can use the W7 x 64 drivers and this model on your software.

    Do not use the BIOS or firmware files well.

    http://support.HP.com/us-en/product/HP-envy-17-K000-notebook-PC/6936213/model/7174495/drivers

  • Need help with drivers [3552 Dell + Win 8.1]

    After you install all THE drivers available for my OS, I still see this unknown device:

    And this device does not work:

    Furthermore the key Fn does not work so I can not change the brightness / volume, etc. using keyboard :(

    Oh, and the touchpad driver could not be installed.

    Where can I find missing them drivers? I tried with drivers to win 10, but they do not work I have 8.1 :(

    Problem solved. I installed the third-party program which scanned my drivers and found missing.

  • HP Pavilion g6-1b61nr: need help with drivers

    Hello, I am looking for drivers for my HP Pavilion 6 g-1b61nr. I'm looking for the ethernet controller network controller and the PCI device. Thanks for any help.

    Hello:

    You need these drivers...

    Ethernet:

    This package contains the Realtek driver local area network (LAN) that allows the NIC (NIC) Realtek chip in the notebook models that are running an operating system supported.

    File name: sp55040.exe

    Network:

    This package contains the installation package driver for Ralink Wireless LAN to laptop models controllers that are running a supported operating system.

    File name: sp57538.exe

    Dev PCI:

    This package contains the driver that allows the Realtek card reader in laptop models running a supported operating system. The card reader allows users to read or write to removable storage cards supported, which are typically used in digital cameras, digital music players and cell phones.

    File name: sp55038.exe

  • need help with drivers dv6

    Hello.

    I recently bought pavilion dv6-6c07ez in Switzerland. It came with windows 7 Home premium. because I'm not good with German, I've upgraded to windows 7 ultimate x 64. now I; m having problems with installing the drivers. I tried with the drivers of hp Germany for this model, but some of them moved there, while bluetooth driver caused the bluescreens. windows update help, I managed to install some of the missing drivers, but still there are 4 items that need driver.

    any help is appreciated.

    eleonoramarkovi wrote:

    Ethernet controller

    PCI\VEN_10EC & DEV_8168 & SUBSYS_3581103C & REV_06 Realtek RTL8168 use the driver at HP support web portal driver, arwea for Win7 x 64

    network controller

    PCI\VEN_168C & DEV_0032 & SUBSYS_1785103C & REV_01 AR9485WB-EG Atheros wireless network adapter

    SM bus controller

    PCI\VEN_8086 & DEV_1C22 & SUBSYS_3581103C & REV_05

    Intel (r) 6 Series/C200 Series Chipset Family SMBus Controller

    Go to island ntel Download Center and get the installer of the chipset to solve this problem of particular driver or the driver on the US or UK HP web support portal.

    standard vga graphics card

    PCI\VEN_1002 & DEV_6760 & SUBSYS_185D103C & REV_00 ATI Radeon 6770 M video module

    the driver on the Web siteshould work. I do not recommend using one to the ATI/AMD Download Center.

    These are the four objects... Thanks in advance

    I will edit this a bit

  • Need help with drivers for Satellite P205-S6267

    I think I have all the drivers for my laptop, but I can't control the brightness of the screen or access capabilities of standby power. I downloaded tons of drivers power saver, and none of them work. Someone please help. I am running XP and the only driver I found is for Vista. I've been at this for two days... Please write to me at:

    [email protected]

    Hello

    Just FYI: whenever you need a driver download from http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_home.jsp?

    As you can see your model of laptop is not yet supported for WXP and I guess you have to wait because you need precisely designed these tools and utilities for your laptop model. In the meantime, I think you can live without brightness control option. In my opinion, it is not so important. Also try to use the Windows power saver options. I'm sure you can use them up to what Toshiba offer WXP tools and utilities.

  • Dumping Windows 8 installation of Windows 7 need help with drivers desktop HP ENVY

    During the holidays, we bought a HP ENVY with Windows 8 is installed, model H8 - 1417C.  This machine has a processor intel I7 3rd generation processor a graphics card from nvidia Geforce GT 630 with 2 GB of memory preinstalled audio beats and 12 GB of RAM as well as a 2 TB HDD.  Sounds like a great machine however several programs I use are not windows 8 compatible over all work via citrx will not load windows 8 anytime in the forseable future.  I therefore decided to remove the original hard disk and replace it with another 2 TB drive and install Windows 7, already purchased.  Today was the day of the change more however when I started hunting for the drivers I came across problems.  HP web site uses drivers for download only in Windows 8.  Its been a while since I've worked inside a machine and Windows 8 only adds to the problems.  But I am sure that if I can find the drivers that I can do the job, that is why I bought the Tablet instead of custom build in order to avoid all this. THANKS in advance for any help.

    You are the very welcome.

    Is there a recommended order generally agreed to install some of the hardware drivers.

    1 chip set.  Install and reboot.

    2 chart. Install and reboot.

    3. audio. Installation and reboot

    4. network cable.

    All others as you wish.

  • Need help with drivers

    Hello world

    my old laptop recently stopped working so I had to move to my old HP Pavilion G4 1125dx

    When I put in my old HDD, even if for some reason any while most of the drivers installed correctly, have not installed my network controller card and PCI device drivers

    No idea what to do? As it is now, I am unable to use the wifi on my old laptop and I am unablr to afford a newer laptop currently

    Here are the two devices hardware ID, I miss the drivers for if that will help

    For the network controller hardware ID

    PCI\VEN_10EC & DEV_8176 & SUBSYS_1629103C & REV_01

    PCI\VEN_10EC & DEV_8176 & SUBSYS_1629103C

    PCI\VEN_10EC & DEV_8176 & CC_028000

    PCI\VEN_10EC & DEV_8176 & CC_0280

    PCI device

    PCI\VEN_10EC & DEV_5209 & SUBSYS_165C103C & REV_01

    PCI\VEN_10EC & DEV_5209 & SUBSYS_165C103C

    PCI\VEN_10EC & DEV_5209 & CC_FF0000

    PCI\VEN_10EC & DEV_5209 & CC_FF00

    Thanks in advance

    Hello

    Realtek RTL8188CE

    http://ftp.HP.com/pub/SoftPaq/sp55001-55500/sp55341.exe

    Card reader controllers - Realtek

    http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=15&PFID=25&level=4&Conn=3&DownTypeID=3&GETDOWN=false

  • Replaced the hard drive, need help with drivers and utilities!

    Hello

    Yesterday, I replaced my old hard drive with a new WD, and I reinstalled Windows Vista.  Everything goes fine until I jumped in the utilities and drivers (Resource CD) supplied with the laptop.  I guess I thought that the CD all the work, would do to reinstall all the necessary drivers and utilities...  Now I'm stuck with a laptop computer that cannot connect to the internet, and the screen is too big.  I don't know there is more wrong with my laptop than meets the eye.  On the CD of drivers & utilities there the list of drivers and some of them have check marks, others do not.  I tried following some online course on which those who/what order to upload, but I don't even have some recommended drivers on the Dell.com site (specific to my Inpiron 1545 model)!  I know that I could download them immediately the site, but I don't even have wifi to do.

    In addition, I read the performance of a Dell Factory Image Restore and I tried it.  When I get the black screen with no option, I have to click on "Repair computer" but the option is not available either... I thought that maybe it would be an easy way to restore my laptop (readers and all) to the original settings.  Maybe the option is not there because my computer is practically empty, with nothing to restore? All I have on my laptop at the moment is Windows Vista 64 bits and drivers a couple that I don't know much.

    Bit of help and advice would be great.

    Anna

    Click on the link below, Guides of operating system Installation.

  • I reformatted my laptop Dell 1545 - Windows XP, but I need help with drivers, please?

    Hi, I reformatted my computer laptop dads 2 days ago, and since then I ve had problems trying to get the necessary drivers.

    The laptop tells me that I'm missing the following

    PCI device

    Network controller

    Video controller

    Video controller (VGA Compatible)

    I reformatted stand-alone in the past and then put in the CD-ROM of drivers and it does the job for me. The CD ROM for the Dell doesn´t do something, so I tried manually to find the drivers on the site, but none say PCI or what I need... How will I know?

    Thank you

    Lauren

    Install these drivers in this order:

    System software:
    http://ftp.Dell.com/Utility/Dell_System-Software_A03_R214472.exe

    Chip set:
    http://ftp.Dell.com/Chipset/R197840.exe

    Then what follows and all other drivers, you must:

    Audio:
    http://ftp.Dell.com/FOLDER88980M/2/R264250.exe

    Network:
    http://ftp.Dell.com/Network/R203386.exe

    Video and wireless drivers depend much on the optional components with that your system has been configured.

    Go into the Manager of devices for the devices in question, do a right click, properties, details tab, change the drop down list of hardware ID and post the FRI and DEV ID is.

  • Need help with drivers for Satellite A210-186

    Hello
    I have a Satellite A210-186 and I can't find the drivers for Windows XP. Can someone tell me where to find the drivers for XP?

    Hello

    If you follow this [LINK: http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU] you can reach the site to download drivers. But I must warn you, momentarily, except for the wireless and display no other driver available. Either they will download the other one or you will have to pick up the remaining drivers in the internet (such as LAN, flashmedia, etc...)

    But I think they should update the section soon and allow us drivers...

    Welcome them

  • Need help with problems after you download Service Pack 2 for Windows XP Home Edition

    I downloaded the havce to uninstall Service Pack 2 only because when I rebooted the computer system has 4-bit color without the possibility to change and everything was HUGE. I need to have installed so I can play Sims and get the rest of the windows downloads. I can't do anything until this issue is resolved. Has anyone else has this problem? I'm working on a new hard drive (180 MB) and I don't know if I need to update the drivers that came with my gateway first, before I can install SP2 correctly. Please someone can help me I got appriciate it! Thanks in advance! If you have any other questions I can answer.

    ~ * Heather * ~.

    aka

    ~ * Slicky * ~.

    If you get just to install WinXP SP2 for the first time ever, keep reading. If not, tell us why you need to reinstall SP2.

    ==================================

    Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) won't fix this!

    HOW to do a clean install of Windows XP: see method 1 and http://michaelstevenstech.com/cleanxpinstall.html#steps in http://support.microsoft.com/kb/978307

    Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or one local network (i.e. other computers) otherwise and before using a flash drive or the SD card that is not brand new, or has not been freshly formatted:

    4 steps to help protect your new computer before going online
         http://www.Microsoft.com/security/pypc.aspx

    Other useful references include:

    HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
    http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c

    HOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install)
    http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

    Tip: After getting the computer fully patched, download/install KB971029 manually: http://support.microsoft.com/kb/971029

    NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the appropriate removal tool before installing updates, Service Packs Windows or IE upgrades and before installing your new anti-virus application (which will require WinXP SP3 must be installed).

    Norton Removal Tool
         FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

    McAfee Consumer product removal tool
         http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

    See also:

    Risks & benefits of P2P file sharing
    http://www.Microsoft.com/protect/data/downloadfileshare/filesharing.aspx
    http://blogs.technet.com/MMPC/archive/2008/10/06/the-cost-of-free-software.aspx

    Measures to help prevent spyware
    http://www.Microsoft.com/security/spyware/prevent.aspx

    Measures to help prevent computer worms
    http://www.Microsoft.com/security/worms/prevent.aspx

    Avoid fake security software!
    http://www.Microsoft.com/security/antivirus/rogue.aspx

    If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • need help with old microsoft sidewinder precision pro to work on windows xp

    I have windows xp family. I try to get my old precision sidewinder pro controller to work. XP does not recognize the controller even when I went to the control panel command, game controllers, sidewinder(auto detect), all I get is, your gameport or gameport drivers are not properly configured. I don't have my original disc supplied with the controller. Can you please direct me in a simple way so that it works because I'm not very good with the Tech stuff. The product I.D. # for my controller is: 85791-579-9297393-00000. The manufacturer is: x 03-57540. It's a Microsoft Precision Pro. It has 4 buttons on the left of the controller, under the buttons he has a small spinning wheel like the disc, according to which another button with an arrow pointing forward, the button can be toggled back for 2 functions, then it has a handle in the middle with 4 buttons on the top and a button below. thank someone for all help.  E-mail address is removed from the privacy *.

    http://www.Microsoft.com/windowsxp/expertzone/newsgroups/reader.mspx?DG=Microsoft.public.WindowsXP.General

    AS it is a question of XP, and the Vista Forums, the link above will help you post in the right place for the right info.

    See you soon. Mick Murphy

  • Need help with a Hp Papvilion Dv7-1270US, from vista to xp 64

    Well, I noticed that a lot of guys are useful here with installing XP on Vista and yes I'm another unhappy Vista user, I am a graphic designer and let me tell you programs and performance is not very good on my laptop HP that I am ready to go back to XP.

    I have an extra HD a seagate sata 80 GB of my PS3 that I drag never used, so I'll use it to install XP on my laptop

    Its what I need help with drivers, man what a pain. I can install drivers left and right that I know how to do this, but Nlite, manual, unzip its so confusing...

    good so I use Nlite to wake my sata drivers and my installation of Windows XP on my HP I would add something in there like {video card driver} {driver Chipset} etc, what should I put in the wake? and once the wake is done and winxp is installed in what order should I start to install stuff, please guys Im confused and need help if someone can point me in the right direction of the dv7-1270 drivers I would appreciate...

    If I happen to screw up my 80 GB hard drive, not a big deal, blue screen, can not load, etc etc... can I just put my original 320 GB hard drive and back to Vista the way it was. ??? is it possible, which would ease my mind, thank you for your responses and assistance.

    Drivers:

    Chipset Intel, (install and reboot before other drivers) here

    Intel Matrix Storage Manager here

    MS-UAA fo SP2 (required with a reboot before the graphic and Audio driver) here

    MS-UAA fo SP3 (required with a reboot before the graphic and Audio driver) here

    NVIDIA GeForce 9600GT here

     

    Intel Wireless 5100 here

    Bluetooth here

    Realtek RTL8168C Family PCI - E Fast Ethernet NIC here

    Please check first that link written by Joshua Wood and concentrate on problems that may appear when you install the sound card in it.

    IDT High-Definition Audio CODEC Pilot,

    1 sp41693, pilot, work reported in XP here view

    2 SP39671, driver, jobs reported in XP here or here view

    3 sp41698, vista, work reported in here XP driver

    High-Definition Audio (HDA) Modem Installer and driver here

    .NET framework (required before HP Quick Lunch Buttons) here

    HP Quick Launch buttons here

    Synaptic Touchpad here S

    ENE CIR (infrared receiver) here (your Vista driver)

    JMB38X card reader Host Controller Driver here

    HP 3D DriveGuard 1.10 has here

    If you had for 7 unknown devices (buttons drivers), here

    Do a manual installation

    Go to Device Manager, right click on the unknown device,

    Choose update driver, not to communicate.

    Choose the install from a list or a specific location, not search, have-disk,

    Navigate to the location of machine.inf.

    Do it for the rest of the unknown devices

Maybe you are looking for

  • Satellite L300 - fails during the installation of recovery

    Today I took delivery of a recovery disk bright, shiny, new, directly at Toshiba. I was under the impreession it would erase all HDD and recreate a factory install with the recovery of HARD drive partition (which is what I want), but it fails every t

  • Airport extreme will reconnect not extended wireless network

    The power to my Airport Express (2nd version; 802.11n) has been inadvertently disconnected and it does not now restore for extended wireless network.  I have an Airport Extreme (802.11ac) that hosts the network.  I have soft, hard, and factory resets

  • Keyboard broken on Satellite Pro 410cdt? Erroneous characters are shown

    Hello guys, my oldies Satellite Pro 410 CDT notebook, with BIOS updated to 6.20, which I am trying to install in the w98se SO. I have a few problems I cannot solve: 1. I formatted a 4.3 GB of a booklet of 70 TB HDD, into two partitions of 814 MB and

  • Very high resolution of my Satellite M35X

    Hi, I own a Toshiba Satellite M35X-S349 with an Intel82852/82855 GM/GME graphics card. Once I changed the output to TV settings. After disconnecting the TV, the resolution of my laptop has become at 800 x 600. I wanted to put the usual maximum resolu

  • How to write Modbus data in a file or a matrix?

    Hello: I can monitor my data through RS-485 port using 'Master Series MB query', and successfully, I can show signals using the waveform. But I can't save the data during the test in a table or write to a file. (see attachment and picture) How can I