need help with first vsphere powercli script

Similar Questions

• Flash beginner needs help with Movie Clips/Action script

  HI -.
  
  I'm having a problem with my video clips playing simultaneously and cannot, for the life of me, know what I did wrong. I'm new to flash so I can I have created something wrong but this is what I have so far:
  
  11 layers, total: 1 layer with 10 buttons, each button with the following actionscript code:
  
  
  on (release) {}
  gotoAndPlay (85);
  }
  
  
  When the number changes with regard to keyframes, the next film is about.
  
  I have 10 films, total, but they are only video clips, mainly photo slideshow with audio, does everything in the library.
  
  The problem occurs when I click on the second or third button. Not only the movie I selected starts to play, but all previous clips are as well, he has completely blurred all the sounds. I don't know what Miss me in action script, as my Action layer has a stop command to this topic at each keyframe where there is a new clip to play.
  
  I tried to add a stopAllSounds command, but I'm afraid that does nothing because it is not an "audio file" in itself playing in the timeline panel.
  
  I'm at the end of my rope and really need help to understand this one. My project is hanging in the balance on this point, I wrote everything correctly and it works beautifully.
  
  Help, please!
  
  Thank you
  Caroline

  Start your sounds in frame 2 and place stopAllSounds() on each keyframe where begins a movieclip.

• Need help with a basic host script?

  All I recently started using Powershell scripts and as big a language it is that I'm still learning at the 'very' early stages. All I would do is create a script that reads some hosts from a text file, and then it receives some info on all the virtual machines associated with this host. I know that the get - vm command can do for ALL the virtual machines in VC but when I run my script it seems to get the information for the VC together and NOT on a per-host basis. (We have several hosts within the domain and require info VM only a couple). Ive checked some samples but nothing that allows me to get the info I need Heres my script so far (very basic, I know!)  $hostlist = (get-vmhost-name (get-content c:\hosts.txt) | select name) #Get VMs for each host foreach ($esx in $hostlist) {$VMs = get - vm foreach ($vm in $VMs) {Write-host $vm. Write-host $vm name. $vm.numcpu MemoryMB Write-host Write-host $vm. Guest}} I know its really basic so far, but all I'm trying to achieve is just get some info on some VMS and report to the console (I know that I can send the information to a spreadsheet myself so now worries it) thank you very much for you help in advance

  You can limit the virtual machines, you receive chaining cmdlets Get-VmHost and Get - Vm together like this

  $hostlist = (get-vmhost -Name (get-content c:\hosts.txt) | select Name)
  
  #Get VMs for each host
  foreach ($esx in $hostlist) {
    $VMs = Get-VMHost $esx | Get-VM
    foreach ($vm in $VMs) {
      Write-host $vm.Name
      Write-host $vm.MemoryMB
      Write-host $vm.numcpu
      Write-host $vm.Guest
    }
  }
  

• Need help with simple if/then script

  I'm trying to replicate a simple if/then statement excel in a PDF form. Have tried several things, but am just not a scripter Java.  The hope that I could get help from the community.

  I have three boxes that contain information on costs. They are labeled LaborCost, MaterialCost & EquipmentCost. Later, in the form, I have two boxes of different output for the sum out of my first three boxes.  If it's a positive number and the other is a negative number.  In Excel forumla language, that's what each of the boxes would read as:

  For the 1st result if it is a positive number: @if (+ LaborCost + MaterialCost + EquipmentCost > 0, + LaborCost + MaterialCost + EquipmentCost, 0)

  For the 2nd result if it is a negative number: @if (+ LaborCost + MaterialCost + EquipmentCost < 0, + LaborCost + MaterialCost + EquipmentCost, 0)

  I think that this should be a simple thing to write, but I'm not familiar with the games of the appropriate language.

  Your colletive help is VERY appreciated.

  Steven

  Try following the calculation script customized:

  // Sum the field values, as numbers
  var sum = +getField("LaborCost").value;
  sum += +getField("MaterialCost").value;
  sum += +getField("EquipmentCost").value;
  
  // Set this field value
  event.value = sum > 0 ? sum : 0;
  

  For others, change the last line:

  Event.Value = sum< 0="" sum="" :="">

• Need help with this find/replace Script.

  Hi I got this script from Loic.Aigon.  And I got it works for find/replace simple changes however I Cannon operate for several changes.

   function cb5CallBack(target) {
          var findProps, changeProps;
          
              findProps = {findWhat:"Distributed by ",}   
                changeProps = { changeTo:"Distributed by. ",}
              findProps = {findWhat:"Distribué par ",}   
                changeProps = { changeTo:"Distribué par. ",}
              findProps = {findWhat:"Distribuido por ",}    
                changeProps = { changeTo:"Distribuido por. ",},
            
          RTXT(target, findProps, changeProps);   
          } 
  

  function RTXT(target, findProps, changeProps)
  {
  app.findChangeTextOptions.caseSensitive = true;
  app.findTextPreferences = app.changeTextPreferences = NothingEnum.nothing;
  app.findTextPreferences.properties = findProps;
  app.changeTextPreferences.properties = changeProps;
  app.changeTextPreferences.properties = changeProps;
  target.changeText();
  }
  

  You must call the function RTXT repeatedly as well:

      var findProps, changeProps;

      findProps   = { findWhat:"Distributed by "};

      changeProps = { changeTo:"Distributed by. "};

      RTXT(target, findProps, changeProps);

      findProps   = { findWhat:"Distribué par "};

      changeProps = { changeTo:"Distribué par. "};

      RTXT(target, findProps, changeProps);

      findProps   = { findWhat:"Distribuido por "};

      changeProps = { changeTo:"Distribuido por. "};

      RTXT(target, findProps, changeProps);

• Need help with some cluster power shell scripts

  Guys,

  I need help with 2 scripts.

  Text 1.

  I need a power shell script that will get all the virtual machine in a specific cluster.  Virtual machine names as well as the number of processors, output allocated RAM and size of CSV file.

  Text 2.

  I need a script that will get all data warehouses in a specific cluster and store name data as well as the amounf of free space for a CSV output.

  Thanks in advance guys.

  Greetings, @peter79 -.

  For the first part:

  Get-Cluster myClusterName | Get-VM | Select-Object Name, MemoryMB, NumCpu | Export-Csv -NoTypeInformation c:\temp\myVMInfo.csv
  

  And for the second, how about:

  Get-Cluster myClusterName | Get-VMHost | Get-Random | Get-Datastore | Select-Object name, FreeSpaceMB, CapacityMB | Export-Csv -NoTypeInformation c:\temp\myDaterstoreInfo.csv
  

  The first would be quite a bit faster by using Get - view instead of Get - VM.  It would be like:

  ## get an array of VM View objects with just the desired/needed properties
  $arrVMViews = Get-View -ViewType VirtualMachine -SearchRoot (Get-Cluster myClusterName).MoRef -Property Config.Hardware,Name
  ## make the two filters for displaying the desired info
  $hshCPUCountFilter = @{n="NumCPUs"; e={$_.Config.Hardware.NumCPU}}
  $hshMemAmtFilter = @{n="MemoryMB"; e={$_.Config.Hardware.MemoryMB}}
  ## display the info, and export to CSV
  $arrVMViews | Select-Object name, $hshCPUCountFilter, $hshMemAmtFilter | Export-Csv -NoTypeInformation c:\temp\myVMInfo.csv
  

  Enjoy.

• Need help with custom script to rename the layers

  Hello world.

  I need help to write a custom script (because I suck at it) that will allow me to go through all the layers and sous-calques for a specific name ('X') and give it a new specific name ('Y').

  I have had success using the script below, but it does not work on any text layers names where the text layer was previously particularly well-known in 'X' and now changed needs.

  Any help is greatly appreciated.

  * Note: this script was originally used to find any layer with 'Copy' in its name and remove with anything after (to correct the problem of duplication of layers by adding this text).

  This is why the function is named removeCopy. It works for renaming layers also - just not a layer of text unfortunately.

  #target illustrator

  	function removeCopy() {}
  	If (app.documents.length == 0) return;
  	var app.activeDocument = docRef;
  	recurseLayers (docRef.layers);
  	}
  	removeCopy();
  	function recurseLayers (objArray) {}
  	for (var i = 0; i < objArray.length; i ++) {}
  	ObjArr [i] .name = ObjArr [i].name.replace (/ \s*current name\s*\d*/, 'new name');
  	If (objArray [i] .layers) recurseLayers (. layers.length > 0 ObjArr [i]);
  	}
  	}

  I finally found something after searching forums for a week. My confusion was related to the way Illustrator treats real layers against text/path/object "layers." Instead of layers, I had to use the pageItems in the script. The code below works. Thanks to Gustavo for his answer in another thread and Carlos I thank you for this looking too good! You're great to be ready to help models do more advanced things with Illustrator.

  	var doc = app.activeDocument;
  	var items = doc.pageItems;
  	for (var g = 0; g)
  	elements [g] .name = elements [g].name.replace ('Century Schoolbook text line', ' MonogramText: Century Schoolbook ");
  	};
  	App.Redraw ();

• Need help with a script (o - o8) *, see the Virgin if there is no

  Hi all what I need help with a script I can't find an example.

  I'm trying to subtract 2 numbers and then multiply this product. (o o8) * one but I just want to do the calculations if all fields have the numbers IE field o, o8 of field and field one.

  Thank you in advance. I was stuck on this days searching the Internet.

  Assuming you want to affect the outcome of this calculation in another text field, use this code as a custom field calculation script:

  var o = this.getField("o").valueAsString;
  var o8 = this.getField("o8").valueAsString;
  var a = this.getField("a").valueAsString;
  if (o!="" && o8!="" && a!="") event.value = (Number(o)-Number(o8))*Number(a);
  else event.value = "";
  

• Need help with the data storage store, local array and network connections

  Need help with my ESXi 4.1 installation

  My hardware:

  I built a server with an Asus P6T whitebox, i7 920, 12 Gig RAM, NIC, Intel Pro1000 PT Quad, 3ware 9650SE-12ML with 8 1.5 TB SATA green in a raid 6 array gives me about 8 + TB with a spare drive all housed within a NORCO RPC-4220 4U Rackmount Server chassis.  I also have a 500 GB SATA drive which will hold the ESXi and virtual machines.

  The network includes a firewall, Netgear Prosafe FVS336G, GS724Tv of Netgear ProSafe 24 port Gigabit Managed Switch on a dhcp cable modem internet service provider.

  I also have 2 old NetGear SC101T NAS disks (4to) I want to connect to the system how some - at a later date have... data on them and want to transfer to the new storage array. I always looking into the question of whether they will work with ESXi 4.1, or I might have to only access it through Windows XP.

  My Situation:

  I have already installed ESXi 4.1 and vsphere client with no problems and it is connected to a dhcp cable internet service.  I've set up host via a dynamic DNS service name give me a static hostname on the internet.  I installed three machines to virtual OS successfully at the moment and now want to first start by creating a multimedia storage server which will use some of this new 8 TB array, then separate data storage for use with a web server small overhead storage and a backup.  It is a domestic installation.

  Help with the data store and network:

  I was doing some reading, because I'm new to this, and it looks like I'll probably want to set up my table via ESXi as a nfs disk format.  Now, the data store is usually in another physical box from what I understand, but I put my readers and ESXi all in the same box.  I'm not sure that the best way to put in place with grouped network cards, but I want to make this work.

  I understand that in ESXi 4.1 using iSCSi LUN must be less than 2 TB, but nfs - I should be able to add a bigger partition then 2 TB (for my multimedia) in nfs, right? or should I still add it separately as a separate 2 TB drives and then extend them to get the biggest space.

  Any suggestions or direct resources showing examples on how to actually add some parts of the table as data warehouses separate nfs.  I know that to go to the configuration tab, and then select Add to storage, and then select nfs. I have not my picture, but it's here that I don't know what to do because ESXi 4.1 system already has an address, should I put the same thing to the new data store array also (will it work?), and what should I use for the name of the folder and the store of data... just do something to the top.  I thought to later install Openfiler (for a multimedia storage using this table server) as a virtual machine, use the table with esxi so that I can access the same storage space with widows and linux-based systems.

  I also know I have to find a way to better use my quad nic card... put in place of virtual switches, grouping, etc HELP?

  Any direction, assistance, similar facilities to sample, suggestions or resources that would help would be great. I did a lot of hunting, but still a little confused on how to best to put in place.

  You must think of VMDK files of large databases with records of random size guest go read some data (a DLL or an INI file), maybe write some data back, then go read other data. Some files are tiny, but certain DLLs are several megabytes. It's random i/o all and heavy on the search time. IO Opsys is small random operations that are often sequential (go read data, write data, go read other data,...) so that deadlines are critical to the overall performance. That's why people say OPS are / s of reference and forget the MBs flow. The only time where you bulk transfers are when you read media (ISO files).

  Well, now forget all this. Actually the disk activity will depend on the specific applications (database? mail server? machines compiler?), but the above is true for boots, and whenever applications are idle. You should see the profile to know.

  RAID 10 is faster (and often more reliable) than RAID 5 or RAID-6 except in certain specific cases. In General RAID 10 is ideal for many random writes, since the calculation of parity for RAID-5 and - 6 adds to the overall latency between command and response - latency is cumulative if a little slow here and a little slow it adds up to a lot of overall slow synchronous especially with e/s on a network. OTOH RAID-5 and -6 can produce faster readings due to the number of heads, so you can use it for virtual machines that transfer bulk. Test. You may find that you need several different types subdashboards for best results.

  You said 3ware, they have some good grades on their site, but don't believe it. With my 9650 that I found myself with only a couple of their recommendations-, I put the (simple) table for allocation size 256 k, nr_requests at 2 x the queue_depth and use the planner date limit. I had the habit for the Ext4 file system formatted with stride and stripe-width synced to the table and used the options large_files with fewer inodes (do not use the huge_files option unless you plan to have single VMDK files in the terabyte range). Use a cache of great reading in advance.

  Virtual machines use VMDK files in all cases except raw iSCSI LUN that they treat native disks. VMDK is easier to manage - you can make a backup by copying the file, you can move it to a PC and load it into another flavour of VMware, etc. There could be some features iSCSI to your San as a transparent migration but nothing for me. NFS has less chatter of Protocol if latency lower times to complete an operation. NFS is good to read and write a block of data, that's all it boils down to.

  UPS is good, but it won't help if something inside the machine explodes (UPS does nothing if the PC power supply goes down). If the RAID card has an option for a battery backup module, so it can contain some writings in memory and may end up the disk i/o after replacing the power supply. 3ware also limits the types of caching available if help is not installed, and you get just the right numbers with the module.

• Need help with Flash - really basic!

  Hi, I really need help with Flash and quick. I have to create an auto-run cd, but before I can create that, I have to make everything works! I took a class in College Flash, which up to 1 1/2 ago so im kind of knowledge missing!
  
  My first problem is as follows:
  I have the homepage, and it contains a button English and french.
  When you click on buttons, it brings you to the next page, either resourcesFr or resourcesEn.
  I tried to use the loadMovie script but and it works but the new page loads on the home page you can still see the English/french under buttons. How can I fix? I know its simple but I am short on time... Should I still use the loadMovie script?
  
  My other problem is that im trying to have another button to link to a folder. Use the script for getURL for this as well?
  
  Help!

  I was able to solve my problem... it was only the forward slash that were in the wrong way... so the correct code is:

  on (release) {}
  DRV = _url.substr (8.1);
  getURL (drv + ": / English/brochures");
  }

  Only took me 5 days... I think I need to buy a script book action! Laughing out loud

• I need help with an installation failure to interpret and troubleshoot a Setup log.

  Background: A few years ago, many editors of cinema used Final Cut Pro 6 (also contained in Final Cut Studio 2) for their editing projects.  Shared Apple Final Cut X uses a different format that is not compatible with FCP6.  Sometimes, these editors are called to work on a few historical projects that have been published in FCP6 and need this version to run now.

  Starting with OS X Lion, FCP6 would install not in Lion and thereafter.

  According research by Jeremy Johnston as noted on his blog, he discovered that Apple has inserted a file in the folder CoreServices in the Library folder of the system folder that causes versions the version Final Cut Pro X (and other older Apple programs in the same situation) do not settle.  He suggested changes to this file that would seek to prevent interfering with the installation of FCP6 in Lion, many users of final cut PRO 6 were successful in their efforts to install in Lion and work with it.

  Later in a discussion update on installing FCP6 in Mavericks, HawaiianHippie determined that the simplest way to perform the installation of FCP6 was simply copy this file and remove it from the system folder, install FCP6 and then restore the copied file:

  https://discussions.Apple.com/message/26309669#26309669

  I used this method with success to install FCS2 in Yosemite:

  

  [click on images to enlarge]

  However, in my attempts to install FCS2 in El Capitan, it fails in the last 5% to install the first DVD:

  

  

  First of all, I need advice on how to display an extremely large Setup log in this thread (on MacRumors, it is a method to insert a 'code' in a small box that can be the object of a scrollbar if necessary to read all along).  I am unable to find such a method to post here.

  Then once approved, I need help to determine which component is causing the installation to fail and perhaps this element can be omitted from the installation:

  

  If this element is not required, then maybe FCP6 can be installed successfully without it.  And if that omitted element is necessary, perhaps a manual method to install it can be determined by pacifists.

  It is my goal to help those who need to install and use FCP6 on their new Macs running El Capitan.

  Here is the post on MacRumors with pre-installed Setup log:

  http://forums.MacRumors.com/threads/i-need-help-with-an-installation-failure-to-interpret-and-troubleshoot-an-Installer-log.1954786/#post-22541389

• NEED HELP WITH SERVICE PACK 3. After downloading and the computer goes into rebooting mode I get the screen to restart with three options, network security safe mode and the other thing. ,

  NEED HELP WITH SERVICE PACK 3.  After downloading and the computer goes into rebooting mode I get the screen to restart with three options, network security safe mode and the other thing. , but it of although he gets, he keeps countdown to restart and reboots and restarts, over and over again, never reboots, same screen. my computer won't let me out this screen even after I turned off the computer and turn it back on, I get the same screen. the only way I can get out of this is to erase my computer everything and bring it back to factory, right out of the box, this big headaches. Thanks for anyone who can help me. PS. Keep the answers in simple terms please.

  Hi BSRC$, in stock

  1. You have security software installed on the computer?
  2. You receive an error message when you restart the computer?

  Reinstalling Windows XP to the factory setting would not be the first option.

  It is possible that some third-party programs or the services installed on the computer interfere with the installation of service pack 3.

  I suggest that you try to uninstall service pack 3 from the computer by using the recovery console and subsequently ask the article below for what to do before installing the service pack 3on the computer.

  How to remove Windows XP Service Pack 3 from your computer

  http://support.Microsoft.com/kb/950249

  Steps to take before you install Windows XP Service Pack 3

  http://support.Microsoft.com/kb/950717

• Need help with slui message with the Validation Code: 50

  OT: need help with the message 'victim' slui...

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 50
  Code of Validation caching online: 0xc004c4a2
  Windows product key: *-* - YMK9F - 7Q3XK-X7D3P
  Windows product key hash: 9WDJkbD1PdUJ + GCdK63bG2yus5g =
  Windows product ID: 00371-702-8613485-06367
  Windows product ID type: 5
  Windows license type: retail
  The Windows OS version: 6.1.7601.2.00010100.1.0.048
  ID: {60986DD4-5ADA-464C-A590-469385BD5D3A} (1)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Professional
  Architecture: 0 x 00000009
  Build lab: 7601.win7sp1_gdr.150928 - 1507
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files (x 86) \Mozilla Firefox\firefox.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {60986DD4-5ADA-464C-A590-469385BD5D3A}1.9.0027.06.1.7601.2.00010100.1.0.048x 64*-*-*-*-X7D3P5S-1-5-21-4040712825-3780279311-4191590923the system manufacturer,System Product NameAmerican Megatrends Inc. 00371-702-8613485-06367 0802 20110601000000.000000 + 000F3A53C07018400FE04090409Central Standard Time(GMT-06:00)03109

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7601.17514

  Name: Windows 7 Professional edition
  Description: operating system Windows - Windows (r) 7, retail channel
  Activation ID: c1e88de3-96c4-4563-ad7d-775f65b1e670
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00371-00212-702-861348-00-1033-7601.0000-1142014
  Installation ID: 022214046070387640229264400212325972472065330163335456
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  Machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: X7D3P
  License status: Notification
  Reason for the notification: 0xC004F200 (non-genuine).
  Remaining Windows rearm count: 4
  Trust time: 12/01/2016 11:28:57

  Windows Activation Technologies-->
  HrOffline: 0x00000000
  HrOnline: 0xC004C4A2
  Beyond: 0 x 0000000000000000
  Event timestamp: 1:11:2016 12:55
  ActiveX: Registered, Version: 7.1.7600.16395
  The admin service: recorded, Version: 7.1.7600.16395
  Output beyond bitmask:

  --> HWID data
  Current HWID of Hash: QAAAAAEAAwABAAEAAQADAAAABwABAAEAln3OI0bUDFRsO24dgCKo58SW2JyUY/1mMckmPrb67HxoDsAKMMl2Vg ==

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes, but no SLIC table
  Windows marker version: N/A
  OEMID and OEMTableID consistent: n/a
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC1425 APIC 060111
  FACP 060111 FACP1425
  HPET 060111 OEMHPET
  MCFG 060111 OEMMCFG
  LASRYVITRAGE OEMB1425 060111
  ASPT 060111 PerfTune
  OEMOSFR OSFR 060111
  SSDT DpgPmm CpuPm

  Hello

  Thanks to everyone who responded to my question.

  Turns out it would not activate the system properties page.

  He did, however, turn on the tool online browser without a

  hitch. Yes, problem solved.

  Jon

• Need help with a Hp Papvilion Dv7-1270US, from vista to xp 64

  Well, I noticed that a lot of guys are useful here with installing XP on Vista and yes I'm another unhappy Vista user, I am a graphic designer and let me tell you programs and performance is not very good on my laptop HP that I am ready to go back to XP.

  I have an extra HD a seagate sata 80 GB of my PS3 that I drag never used, so I'll use it to install XP on my laptop

  Its what I need help with drivers, man what a pain. I can install drivers left and right that I know how to do this, but Nlite, manual, unzip its so confusing...

  good so I use Nlite to wake my sata drivers and my installation of Windows XP on my HP I would add something in there like {video card driver} {driver Chipset} etc, what should I put in the wake? and once the wake is done and winxp is installed in what order should I start to install stuff, please guys Im confused and need help if someone can point me in the right direction of the dv7-1270 drivers I would appreciate...

  If I happen to screw up my 80 GB hard drive, not a big deal, blue screen, can not load, etc etc... can I just put my original 320 GB hard drive and back to Vista the way it was. ??? is it possible, which would ease my mind, thank you for your responses and assistance.

  Drivers:

  Chipset Intel, (install and reboot before other drivers) here

  Intel Matrix Storage Manager here

  MS-UAA fo SP2 (required with a reboot before the graphic and Audio driver) here

  MS-UAA fo SP3 (required with a reboot before the graphic and Audio driver) here

  NVIDIA GeForce 9600GT here

   

  Intel Wireless 5100 here

  Bluetooth here

  Realtek RTL8168C Family PCI - E Fast Ethernet NIC here

  Please check first that link written by Joshua Wood and concentrate on problems that may appear when you install the sound card in it.

  IDT High-Definition Audio CODEC Pilot,

  1 sp41693, pilot, work reported in XP here view

  2 SP39671, driver, jobs reported in XP here or here view

  3 sp41698, vista, work reported in here XP driver

  High-Definition Audio (HDA) Modem Installer and driver here

  .NET framework (required before HP Quick Lunch Buttons) here

  HP Quick Launch buttons here

  Synaptic Touchpad here S

  ENE CIR (infrared receiver) here (your Vista driver)

  JMB38X card reader Host Controller Driver here

  HP 3D DriveGuard 1.10 has here

  If you had for 7 unknown devices (buttons drivers), here

  Do a manual installation

  Go to Device Manager, right click on the unknown device,

  Choose update driver, not to communicate.

  Choose the install from a list or a specific location, not search, have-disk,

  Navigate to the location of machine.inf.

  Do it for the rest of the unknown devices

• Need help with sizing and save files in batches

  Hi need help with a project.

  I have thousands of vector files that I need size of 350px X 350px, and then place it on a work plan x 600px-600px.

  Then I need to save it to the web as a PNG with a transparent background.

  Could I do a script for? or is there another way to do it in batches?

  I wouldn't have to open them one by one and resize the work plan then the image and save it one by one as that would take forever.

  Any help some suggestions would be greatly appreciated.

  ID do as a series of actions photoshop if the end result is png,

  pro image processor can help you make automatically, if you must resize batch additional... >

  https://sourceforge.NET/projects/PS-scripts/files/image%20Processor%20PRO/v3_2%20betas/

  I think that your work can run in a few steps, but for simplicity, I would like to start / test with a new photoshop action recording

  Open a file, change the size of the image to 350 x 350

  Change the canvas size,

  then save under...