NEED HELP WITH SERVICE PACK 3. After downloading and the computer goes into rebooting mode I get the screen to restart with three options, network security safe mode and the other thing. ,

NEED HELP WITH SERVICE PACK 3.  After downloading and the computer goes into rebooting mode I get the screen to restart with three options, network security safe mode and the other thing. , but it of although he gets, he keeps countdown to restart and reboots and restarts, over and over again, never reboots, same screen. my computer won't let me out this screen even after I turned off the computer and turn it back on, I get the same screen. the only way I can get out of this is to erase my computer everything and bring it back to factory, right out of the box, this big headaches. Thanks for anyone who can help me. PS. Keep the answers in simple terms please.

Hi BSRC$, in stock

  1. You have security software installed on the computer?
  2. You receive an error message when you restart the computer?

Reinstalling Windows XP to the factory setting would not be the first option.

It is possible that some third-party programs or the services installed on the computer interfere with the installation of service pack 3.

I suggest that you try to uninstall service pack 3 from the computer by using the recovery console and subsequently ask the article below for what to do before installing the service pack 3on the computer.

How to remove Windows XP Service Pack 3 from your computer

http://support.Microsoft.com/kb/950249

Steps to take before you install Windows XP Service Pack 3

http://support.Microsoft.com/kb/950717

Tags: Windows

Similar Questions

  • After downloading XP SP3 computer goes into endless loop of startup

    Information system

    HP Compaq Presario processor 3400 AMD Atholn 64

    Windows XP Home Edition SP 2 Version 5.1 (32 bit)

    After you download the SP3 of XP when the computer restarts, it goes into a restart without end. It will get so far in the reboot and it will start all this will last until it is put in safe mode or cut. I had to put it in safe mode and go back to a previous restore point to get the computer usable again. I read that the Intel chips are not the problem but I'm not sure of the correction.

    Please see for a resolution on this subject - is your boot AMD computer after installing XP SP3?

    Expert MowGreen Windows IT Pro - consumer safety

  • I need help installing service Pack 1 (sp1).

    I tried several times to install service pack 1 (Sp1) with engineers at microsoft, but nothing is. They give up the ball after several unsuccessful attempts to install sp1.  I need someone who could help me to install the service pack. I need help!

    My second question is to unblock my e-mail account. I have all the major issues in this account. Live mail engineers just keep going in a circle without end. I've provided all the information that they need to unlock the account, but they don't have yet does. I need help here too. !

    Sincerely,

    Eli Cham.

    Hello

    wrong forum for these two questions

    Click Start - right click on computer - left click Properties - he will tell you he 'bit' version of vista you have, either 32-bit or 64-bit

    Here's the direct download links for whatever version of bits you have;

    Vista SP1 32-bit version;

    http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=30

    64-bit version of Vista SP1:

    http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=21299

    This article explains how to troubleshoot problems when you install a service pack for Windows Vista or Windows Server 2008.

    http://support.Microsoft.com/kb/947366

    Use this forum link for all questions related to Windows Vista SP1, Windows Vista SP2 and Windows Server 2008 SP2 below.

    http://social.technet.Microsoft.com/forums/en/itprovistasp/threads

    or repost in the Windows Update forum link below

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

    ________________________________________________________________________

    I'm sorry, but we cannot help with hotmail problems in these forums in response to vista

    Please repost your question in hotmail in the hotmail link below forums

    http://windowslivehelp.com/product.aspx?ProductID=1

    Forums
  • need help with natted routing networks

    Hello

    1 VMWorkstation on the 192.168.1.0 network

    2. virtual machines on natted 10.0.0.0 255.255.0.0 Gateway 10.0.0.1

    I have 2003 domain on this network. I have DC, Exchange and work station.

    I have no problem with access for network 10.0.0.0 192...

    But I can't ping 10.0.0.0... from 192.0.0.0 machines, beside the host 192.168.1.130.

    Yes, I can ping the host virtual.

    I added the road to 10.0.0.0 on one of the 192... machines, it can't do on 10.0.0.0 machine

    What does take to ping network 10...

    THX.

    Michael.

    If 10.0.0.0 is your virtual network of NAT (VMnet8) you cannot ping it because it is hidden to the outside (because it's NAT). You can only join in this network of specific port forwarding, but packages must go to the IP address of the host (and then they are redirected to the virtual prompt appropriate depending on the configuration of port forwarding).

    AWo
    VCP / VMware vEXPERT 2009

    = Due to a lack of employees, human beings humans are working here. -Treat it with care, they are rare. =

  • sharing family. need help with payment options

    My sister & I are sharing family & we both have our own credit cards on our own accounts.  But when I try to make a purchase, I get a message that IT has to allow it?  Why do I need someone else.s permission to make a purchase on MY account with MY credit card?  How can I fix?

    If you use a family sharing then the card to the family of the organizer can only be used (or, if you are not the Organizer, your account balance) - family members cannot use their own cards, while they remain in the family sharing.

  • need help with payment options

    Hello

    I have problems setting up the types of payment in British Colombia.

    As a result of this statement- http://KB.worldsecuresystems.com/893/bc_893.html

    I've set up

    "Call for payment" (cash) to a value of 3

    "Bank deposit" (EFT) to a value of 4

    The problem is that if I select in the shopping cart I need them to show that the Bill is unpaid. My client through the system will process and issue the invoice at a later date once they have confirmed the payment was made.

    Currently both these options produce an invoice that shows the payment being completed. Is there a way to show the payment as unpaid? I would also like to be able to define the type of payment on the workflow so that the customer can identify those that need to be addressed separately.

    I also will be put in place a bridge of payment for payments by credit card, and it will be another option (value 1)

    see you soon

    Deb

    Hi Deb enter in order and click on modify. Where you can see the status of the order click on the small square next to the drop-down list. You must set the default value to be something else.

    By default, the status of the default command and the first to define is that.

  • Need help with date + put social security in shape in PDF format...

    HI -.

    I m working on a form that must be filled from the internet...

    The design I made I have InDesign - and the formfields I did I have Acrobat Pro.
    and finally I m setting everything in LiveCycle...

    I met two problems...

    I need the date field to correct himself--if the choice of the user to use the wrong format...

    for example -.

    We want to have AAAA-MM-JJ
    and if the user writes JJ MM AA-
    It must be accepted and corrected...

    Also - in Sweden in any case always write us the number of social security in this way
    YYMMDD-NNNN (N = number between 0 and 9)

    How can I get the requgnize field and 'demand' this format...

    I´ll hope my Swinglish can be understandable?

    Idespiran

    Perhaps the LC can detect the AcroForm fields and convert them into fields of LC, but you may lose some things like formatting, validation, calculation, etc.

    Is that the two are not compatible. I find easier to handle, Acrobat forms personally, but you might disagree.

    If you decide to use the LC forms, then you should post your question in the forum Live Cycle Designer.

  • Windows wireless service turns off when the computer goes into sleep mode

    Windows 7 64 bit, HP DV4 laptop. Was working fine until the update of adobe reader may also have a windows update. Have since been uninstalled adobe reader software and reinstalled. Updated the qualcom wireless driver.  WLAN keeps logging service when my laptop goes to sleep. I can restart with services and it works again. Autoconfiguration WLAN service is set to restart the service for 2 trys.

    Hello

    . You receive an error code or message?

    Please follow the methods and mark the question below:

    Method 1:

     

    You need perform a clean boot to prevent possible ask contradictory from interfering with your computer.

    To put the computer in a clean boot state, you must follow the steps in the article mentioned below.   How to solve a problem by performing a clean boot? : For more information on the execution of clean boot, follow the link.

    http://support.Microsoft.com/kb/929135

    Note: You must follow step 7 of the article mentioned above to recover the computer to Normal startup after you complete all the steps.

     

    Method 2:

     

    Using the troubleshooter from network in Windows 7:

    http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

     

    Method 3:

     

    Why am I disconnected from my network? :

    http://Windows.Microsoft.com/en-us/Windows7/why-am-I-being-disconnected-from-my-network

     

    Method 4:

     

    Wi - Fi and in Windows network connection issues:

    http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

    I hope this helps.

  • Will be that the download stops when the computer goes into sleep mode?

    Will download, install, or all these action stops when the laptop goes to sleep.

    MK

    Yes, it will be.

  • Need help with the installation of Windows XP SP3.

    Original title: xp sp3 criteria.

    My XP sp3 OS does not start.  My xp sp2 installation disc is corrupt.  I did a benchmark of different BONE with a base XP CD.   IE 6 now does not work

    Can I download and upgrade directly to XP SP3?

    Yes. It is the only way to get windows update to work. Start by checking your service pack level is by clicking on start---> run and typing winver in the Run dialog box. Click ok. Depending on your level of service pack, you can download and install

    Windows XP SP3.

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=24

    XP SP2.

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=28

    STEPS TO TAKE BEFORE INSTALLING XP SP3.

    http://support.Microsoft.com/kb/950717

    Good luck

  • Need help with network home using Airport extreme

    I need help with my home network.  I'm not very aware when it comes to all things network.  Here's how my network is currently set up.

    Cable modem to Airport Extreme for Gigabit Switch.  Cables come out of the switch to all areas of the House.  I have 2 other extreme airport connected in other rooms of the House directly on the wall that dates back to the switch.  I hope I am explaining that properly.

    My problem is that this seems to have caused some of my connections cable does not work.  When everything is configured, it has worked well.  All connections in the House worked.  Then we have disconnected one of the extreme airport and moved to another location in the House to have the best wifi coverage.  Since that time, a lot of the ethernet wall plugs are not working.  For example, when I plug in my Macbook Pro in making ethernet in my kitchen, it says connected but it has an assigned ip address and cannot connect to the internet.

    Any help you can provide would be great.

    I would like to get the return tech to help you to...

    But it is likely that something (or someone) has tampered with the settings.

    The layout is fine... but you can cause problems with the network by creating a loop.

    This can happen because the AE you moved is connected wrongly... somewhere in the network it is connected to the switch again.

    Or AE is set to expand wireless... It's FAKE... It will loop the network on the back main EI wireless.

    Unplug the two AE you have that function as extensions...

    Turning off everything else... then it works again...

    Do it in this order.

    Modem... Wait 2 min

    AE... Wait 2 min

    Switch.

    Now check that the network is working properly... power of customers in various locations and make sure everything is good.

    If so, then manually reset the two AE of factory and redo their installation.

  • Need to install Service pack 3 for Vista to download my Zune player

    Just need to install Service pack 3 for Vista to complete my download to my Zune Player...

    Thank you

    LEA Shauna Toenniges

    http://Windows.Microsoft.com/en-us/Windows/downloads/service-packs

    As you can see not SP3 for Vista.

    As you can see, the Zune Player requires XP with SP3 not Vista with Service Pack 3.

    Requirements for the Zune Player-

    http://www.Zune.NET/EN-AU/products/LearningCenter/zunesoftware/gettingstarted/pcreqs.htm

    Microsoft Windows 7 (all editions), Windows Vista (all editions), Windows XP with Service Pack 3 (home, professional, Tablet PC, or Media Center Edition 2005 with Rollup Update 2) or Mac OS X with Boot Camp running Windows 7 or Windows Vista.

    If you use a Windows 7 64-bit edition or Windows Vista, please click here to download the Zune software.

    Software Zune will not work on versions of Windows prior to Windows XP SP3, all the versions of 64-bit of Windows XP or any version of Windows Server.

    Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

  • After a fresh install with XP Home EWdition, Service pack 1, 2.0, and 3.0, I can't install Windows Update or IE8.

    After a fresh install with XP Home EWdition, Service pack 1, 2.0, and 3.0, I can't install Windows Update or IE8. Update back me to http://support.microsoft.com/kb/2497281

    Article ID: 2497281 - last review: January 18, 2011 - revision: 1.0

    You may be unable to access the site Web Windows Update in Windows XP, Windows 2000, or Windows Server 2003 if these versions of Windows are not updated with the latest Service Pack

    But I have service Pack 3.  IE8 fails, install a convenience store, but after following the instructions there is no difference.

    I am at a loss for the next steps...

    There was problems with the server for updates for a few weeks now...

    Many people say that download and run the Update Agent stand-alone file solves this problem:

    http://download.windowsupdate.com/WindowsUpdate/redist/standalone/7.4.7600.226/WindowsUpdateAgent30-x86.exe

    For more information:

    http://support.Microsoft.com/kb/943144

    For later use, it is not necessary to use all the steps you mentioned. You can upgrade directly from SP1a to SP3.

  • Need help with the launching track pack for forza code 4

    Bought new Forza 4 and the lancer Track Pack code does not work, how do I get a code that is generated in the form I've already paid for it. Rank of loads of numbers and sent 10 s of emails but cant seem to get help.

    This is the help I get when the cat to an Ambassador xbox on xbox.com

    Terry wrote:
    Need help with the launching track pack for forza code 4
    The Xbox Ambassador says:
    Location of Ambassador of the community...
    The Xbox Ambassador says:
    Location of Ambassador of the community...
    The Xbox Ambassador says:
    Your question will be answered by an Ambassador of the Xbox. You have been connected to the Ambassador as a user Xbox [3]
    The Xbox Ambassador says:
    Hello
    Terry wrote:
    Hello
    The Xbox Ambassador says:
    Hey
    Terry wrote:
    just to be on the phone to xbox live support and was told to come here
    The Xbox Ambassador says:
    ok\
    The Xbox Ambassador says:
    What is your problem?
    Terry wrote:
    I bought the 4 for forza ansd 360 new sealed Christmas...
    Terry wrote:
    has got 2 codes that accompanies the game but the pack track code does not work
    The Xbox Ambassador says:
    Wow good
    Terry wrote:
    whenever I put in the code it says code redeemed
    The Xbox Ambassador says:
    I think the code is used. You must return to the retailer
    Terry wrote:
    I tried to, but since I already opened the case they will not accept
    The Xbox Ambassador says:
    Oh. No,
    Terry wrote:
    the code had been used or defective as I am the only person who has touched the game once opened, tried to enter the code when it is open
    The Xbox Ambassador says:
    Maybe it was auto bought?
    Terry wrote:
    so, how do I get another code generated track Pack if defective?
    The Xbox Ambassador says:
    I do not know.
    Terry wrote:
    bought the game new, so I get the track pack
    The Xbox Ambassador says:
    Oh. It's bad.
    The Xbox Ambassador says:
    I think that if you Exchange 1 code it will buy it
    Terry wrote:
    car pack code worked, starter pack did not work
    The Xbox Ambassador says:
    Oh.
    The Xbox Ambassador says:
    It's a bad
    The Xbox Ambassador says:
    BTW you have an evolution of the tests?
    Terry wrote:
    Yes, I want to? but more anxious to get a code object generated for this pack
    The Xbox Ambassador says:
    Hey if I help can u give me this game too?
    Terry wrote:
    ?????????????????
    Terry wrote:
    So is it possible to get a code for that time?
    The Xbox Ambassador says:
    Hey
    The Xbox Ambassador says:
    Yes.
    The Xbox Ambassador says:
    you need to contact them
    The Xbox Ambassador says:
    and tell them that the code is used.
    Terry wrote:
    I was told to come here? where can I go to get the code?

    Hi Terryg76,

    ·         What version of the operating system is installed on the computer?

    I suggest you to contact the game manufacturer for more help and information.

  • need help with download of cc. gives error 1001 whenever I install.

    need help with download of cc. gives error 1001 whenever I install.

    Hello

    Please see the thread: https://forums.adobe.com/thread/2106211 and CC update crash! Error code: 1001

    Also, please see the article: https://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html

    Please write if it helps.

    Kind regards

    Shelly

Maybe you are looking for

  • change the old iTunes to the new icon icon

    I have the latest version of iTunes 12.4.1.6, but it still uses an old icon. How can I get the new icon?

  • Why a sign in pop up on a bookmarklet doesn't let me connect?

    When I click on the Ziplist bookmarklet that I installed, it displays a sign in to Ziplist. I open a session; He asks me to log in again and again and again. Why? ZIPList bookmark works on Safari. When I contacted support list Zip, they said that if

  • Laptop HP Pavillion TS 10: freeze

    my laptop is fixed in the splash screen.  is it possible to get on the desktop to run CCleaner?  There was a CNettoyez alert that flashed above all locked.

  • detection with high speed HAVE changes at high speed

    I'm working on a helmet testrig. We use the card M PCI-6251. An accelerometer 3 axes is set inside the helmet and its fall of variable height up to 3 m. During his fall, I need to gain entrance to the analog accelerometer (sampling > = 100 kHz) and a

  • Clock of the printer

    HP Envy 5660 clock is exactly 5 hours ahead of the (correct) (area CDT) computer clock. How can I put it?