Need help with the debugging of flash for survey email form script!
Hi all
I have a survey form .fla file I adapted a fedback form work. They use .asp to compile and send an email, but I can't work on why the survey form does not work. Anyone would be able to run on this script and tell me if there is anything wrong with it. I've been going on it again and again, but can not see something wrong!
Question1. Text = question2.text = question3.text = question4.text = question5.text = question6.text = question7a.text = question7b.text = question7c.text = question7d.text = question7e.text = question7f.text = contact_message.text = age.text = business.text = contact_email.text = message_status.text = "";
send_button.addEventListener (MouseEvent.Click, Submit);
reset_button.addEventListener (MouseEvent.CLICK, reset);
System.security.allowDomain ("localhost");
var: timer;
var var_load:URLLoader = new URLLoader;
var URL_request:URLRequest = new URLRequest("mail.asp");
URL_request. Method = URLRequestMethod.POST;
function submit(e:MouseEvent):void
{
If (question1.text == "" |) Question2.text == ' | Question3. Text == ' | question4. Text == ' | question5. Text == ' | question6. Text == ' | question7a. Text == ' | question7b. Text == ' | question7c. Text == ' | question7d. Text == ' | question7e. Text == ' | question7f. Text == ' | contact_message. Text == ' | Age.Text == ' | "Business.Text == ' | contact_email. Text == "")
{
MESSAGE_ERROR. Text = "* fill all fields!";
}
else if (! validate_email (contact_email.text))
{
MESSAGE_ERROR. Text = "* Invalid Email!";
}
on the other
{
MESSAGE_ERROR. Text = "";
message_status. Text = "Send"... » ;
var email_data:String = '& question1 =' + question1.text
+ '& question2 =' + question2.text
+ '& question3 =' + question3.text
+ '& question4 =' + question4.text
+ '& question5 =' + question5.text
+ '& question6 =' + question6.text
+ '& question7a =' + question7a.text
+ '& question7b =' + question7b.text
+ '& question7c =' + question7c.text
+ '& question7d =' + question7d.text
+ '& question7e =' + question7e.text
+ '& question7f =' + question7f.text
+ '& message =' + contact_message.text
+ "& age =" + age.text
+ ' & company = "+ business.text
+ '& email =' + contact_email.text;
var URL_vars:URLVariables = new URLVariables (email_data);
URL_vars. DataFormat = URLLoaderDataFormat.TEXT;
URL_request. Data = URL_vars;
var_load. Load (URL_request);
var_load.addEventListener (Event.COMPLETE, receive_response);
}
}
function reset(e:MouseEvent):void
{
Question1. Text = question2.text = question3.text = question4.text = question5.text = question6.text = question7a.text = question7b.text = question7c.text = question7d.text = question7e.text = question7f.text = contact_message.text = age.text = business.text = contact_email.text = message_status.text = "";
}
function validate_email(s:String):Boolean
{
var p:RegExp = /(\w|[_.\-])+@((\w|-)+\.) + \w{2,4} +;
var r: Object = p.exec (s);
If (r is nothing)
{
Returns false;
}
Returns true;
}
function receive_response(e:Event):void
{
var loader: URLLoader = URLLoader (e.target);
var email_status = new URLVariables (loader.data) .resposta;
If (email_status is "Yes")
{
message_status. Text = "thank you for your comments. We will be in touch shortly. « ;
Timer = new Timer (500);
timer.addEventListener (TimerEvent.TIMER, on_timer);
Timer.Start ();
}
on the other
{
MESSAGE_ERROR. Text = "Message send didn t!"
}
}
function on_timer(te:TimerEvent):void
{
If (timer.currentCount > = 5)
{
Question1. Text = question2.text = question3.text = question4.text = question5.text = question6.text = question7a.text = question7b.text = question7c.text = question7d.text = question7e.text = question7f.text = contact_message.text = age.text = business.text = contact_email.text = message_status.text = "";
timer.removeEventListener (TimerEvent.TIMER, on_timer);
}
}
Thanks in advance.
J
your string is incorrect. use:
var email_data:String = '? '. Question1 ="+ question1.text
+ '& question2 =' + question2.text
+ '& question3 =' + question3.text
+ '& question4 =' + question4.text
+ '& question5 =' + question5.text
+ '& question6 =' + question6.text
+ '& question7a =' + question7a.text
+ '& question7b =' + question7b.text
+ '& question7c =' + question7c.text
+ '& question7d =' + question7d.text
+ '& question7e =' + question7e.text
+ '& question7f =' + question7f.text
+ '& message =' + contact_message.text
+ "& age =" + age.text
+ "& business =" + business.text
+ '& email =' + contact_email.text;
Tags: Adobe Animate
Similar Questions
-
Need help with the launching track pack for forza code 4
Bought new Forza 4 and the lancer Track Pack code does not work, how do I get a code that is generated in the form I've already paid for it. Rank of loads of numbers and sent 10 s of emails but cant seem to get help.
This is the help I get when the cat to an Ambassador xbox on xbox.com
Terry wrote:Need help with the launching track pack for forza code 4The Xbox Ambassador says:Location of Ambassador of the community...The Xbox Ambassador says:Location of Ambassador of the community...The Xbox Ambassador says:Your question will be answered by an Ambassador of the Xbox. You have been connected to the Ambassador as a user Xbox [3]The Xbox Ambassador says:HelloTerry wrote:HelloThe Xbox Ambassador says:HeyTerry wrote:just to be on the phone to xbox live support and was told to come hereThe Xbox Ambassador says:ok\The Xbox Ambassador says:What is your problem?Terry wrote:I bought the 4 for forza ansd 360 new sealed Christmas...Terry wrote:has got 2 codes that accompanies the game but the pack track code does not workThe Xbox Ambassador says:Wow goodTerry wrote:whenever I put in the code it says code redeemedThe Xbox Ambassador says:I think the code is used. You must return to the retailerTerry wrote:I tried to, but since I already opened the case they will not acceptThe Xbox Ambassador says:Oh. No,Terry wrote:the code had been used or defective as I am the only person who has touched the game once opened, tried to enter the code when it is openThe Xbox Ambassador says:Maybe it was auto bought?Terry wrote:so, how do I get another code generated track Pack if defective?The Xbox Ambassador says:I do not know.Terry wrote:bought the game new, so I get the track packThe Xbox Ambassador says:Oh. It's bad.The Xbox Ambassador says:I think that if you Exchange 1 code it will buy itTerry wrote:car pack code worked, starter pack did not workThe Xbox Ambassador says:Oh.The Xbox Ambassador says:It's a badThe Xbox Ambassador says:BTW you have an evolution of the tests?Terry wrote:Yes, I want to? but more anxious to get a code object generated for this packThe Xbox Ambassador says:Hey if I help can u give me this game too?Terry wrote:?????????????????Terry wrote:So is it possible to get a code for that time?The Xbox Ambassador says:HeyThe Xbox Ambassador says:Yes.The Xbox Ambassador says:you need to contact themThe Xbox Ambassador says:and tell them that the code is used.Terry wrote:I was told to come here? where can I go to get the code?Hi Terryg76,
· What version of the operating system is installed on the computer?
I suggest you to contact the game manufacturer for more help and information.
-
IPsec VPN Phase 2 does not. Need help with the debug output
Is someone can you please tell me why I can't establish ipsec Phase 2 negotiations. I'm trying to connect a 2651XM to a Pix 501.
Here are the isakmp debug and release of ipsec and configs. I checked the keys are the same. And sets of transformations look ok. No idea why its not working?
What is the bottom tell me?
===========================================================
01:32:37: IPSEC (validate_transform_proposal): invalid local address 1.1.1.2
01:32:37: ISAKMP:(0:2:SW:1): IPSec policy invalidated proposal
01:32:37: ISAKMP:(0:2:SW:1): politics of ITS phase 2 is not acceptable! (local 1.1.1.2 re)
Mote 1.1.1.3)
01:32:37: IPSEC (validate_transform_proposal): invalid local address 1.1.1.2
01:32:37: ISAKMP:(0:2:SW:1): IPSec policy invalidated proposal
01:32:37: ISAKMP:(0:2:SW:1): politics of ITS phase 2 is not acceptable! (local 1.1.1.2 re)
Mote 1.1.1.3)
===============================================================================
ISAKMP (0): start Quick Mode Exchange, M - ID - 1154286426:bb32fca6
crypto_isakmp_process_block: CBC 1.1.1.2 1.1.1.3 dest
ISAKMP (0): processing NOTIFY payload Protocol 14 2
SPI 2224366689, message ID = 1503891776
ISAKMP (0): removal of spi 1629787524 message ID = 3140680870
to return to the State is IKMP_NO_ERR_NO_TRANS
pixfirewall #.
pixfirewall # sh crypto is
ISAKMP (0): start Quick Mode Exchange, M - ID 400184159:17da535f
crypto_isakmp_process_block: CBC 1.1.1.2 1.1.1.3 dest
ISAKMP (0): processing NOTIFY payload Protocol 14 2
SPI 2649583861, message ID = 1778335964 a.
ISAKMP (0): removal of spi 4117818781 message ID = 400184159
status code returned is IKMP_NO_ERR_NO_TRANSkmp its
Total: 1
Embryonic: 0
Src DST in the meantime created State
1.1.1.2 1.1.1.3 QM_IDLE 0 0
pixfirewall #.
ISAKMP (0): start Quick Mode Exchange, M - ID 923039456:370476e0
crypto_isakmp_process_block: CBC 1.1.1.2 1.1.1.3 dest
ISAKMP (0): processing NOTIFY payload Protocol 14 2
SPI 2163779852, message ID = 2746774364
ISAKMP (0): removal of spi 212465792 message ID = 923039456
to return to the State is IKMP_NO_ERR_NO_TRANSexiClosure of session
CCC cryp #sh
CCC #sh crypto isakmp his
status of DST CBC State conn-id slot
1.1.1.2 1.1.1.3 QM_IDLE 1 0 ACTIVECCC #ping 192.168.1.1
Type to abort escape sequence.
Send 5, echoes ICMP 100 bytes to 192.168.1.1, time-out is 2 seconds:
.....
Success rate is 0% (0/5)CCC #ping 192.168.1.5
Type to abort escape sequence.
Send 5, echoes ICMP 100 bytes to 192.168.1.5, time-out is 2 seconds:
.....
Success rate is 0% (0/5)
CCC #debug isakmp crypto
Crypto ISAKMP debug is on
CCC #debug crypto ipsec
Crypto IPSEC debugging is on
Crypto CCC talkative #debug
detailed debug output debug is on
CCC #ping 192.168.1.5Type to abort escape sequence.
Send 5, echoes ICMP 100 bytes to 192.168.1.5, time-out is 2 seconds:
.....
Success rate is 0% (0/5)
CCC #.
00:51:24: ISAKMP (0:134217729): received packet of 1.1.1.3 dport 500 sport 500
Global (R) QM_IDLE
00:51:24: ISAKMP: node set 1268073006 to QM_IDLE
00:51:24: ISAKMP:(0:1:SW:1): HASH payload processing. Message ID = 1268073006
00:51:24: ISAKMP:(0:1:SW:1): treatment ITS payload. Message ID = 1268073006
00:51:24: ISAKMP: (0:1:SW:1): proposal of IPSec checking 1
00:51:24: ISAKMP: turn 1, AH_SHA
00:51:24: ISAKMP: attributes of transformation:
00:51:24: ISAKMP: program is 1 (Tunnel)
00:51:24: ISAKMP: type of life in seconds
00:51:24: ISAKMP: life of HIS (basic) of 28800
00:51:24: ISAKMP: type of life in kilobytes
00:51:24: ISAKMP: service life of SA (IPV) 0x0 0 x 46 0 50 x 0 x 0
00:51:24: ISAKMP: authenticator is HMAC-SHA
00:51:24: ISAKMP: (0:1:SW:1): atts are acceptable.
00:51:24: ISAKMP: (0:1:SW:1): proposal of IPSec checking 1
00:51:24: ISAKMP: turn 1, ESP_3DES
00:51:24: ISAKMP: attributes of transformation:
00:51:24: ISAKMP: program is 1 (Tunnel)
00:51:24: ISAKMP: type of life in seconds
00:51:24: ISAKMP: life of HIS (basic) of 28800
00:51:24: ISAKMP: type of life in kilobytes
00:51:24: ISAKMP: service life of SA (IPV) 0x0 0 x 46 0 50 x 0 x 0
00:51:24: ISAKMP: (0:1:SW:1): atts are acceptable.
00:51:24: IPSEC (validate_proposal_request): part #1 of the proposal
(Eng. msg key.) Local INCOMING = 1.1.1.2, distance = 1.1.1.3.
local_proxy = 10.10.10.0/255.255.255.0/0/0 (type = 4),
remote_proxy = 192.168.1.0/255.255.255.0/0/0 (type = 4),
Protocol = AH, transform = ah-sha-hmac (Tunnel),
lifedur = 0 and 0kb in
SPI = 0 x 0 (0), id_conn = 0, keysize = 0, flags = 0 x 2
00:51:24: IPSEC (validate_proposal_request): part #2 of the proposal
(Eng. msg key.) Local INCOMING = 1.1.1.2, distance = 1.1.1.3.
local_proxy = 10.10.10.0/255.255.255.0/0/0 (type = 4),
remote_proxy = 192.168.1.0/255.255.255.0/0/0 (type = 4),
Protocol = ESP, transform = esp-3des (Tunnel),
lifedur = 0 and 0kb in
SPI = 0 x 0 (0), id_conn = 0, keysize = 0, flags = 0 x 2
00:51:24: IPSEC (validate_transform_proposal): invalid local address 1.1.1.2
00:51:24: ISAKMP:(0:1:SW:1): IPSec policy invalidated proposal
00:51:24: ISAKMP:(0:1:SW:1): politics of ITS phase 2 is not acceptable! (local 1.1.1.2 re)
Mote 1.1.1.3)
00:51:24: ISAKMP: node set-429221146 to QM_IDLE
00:51:24: ISAKMP: (0:1:SW:1): Protocol to send NOTIFIER PROPOSAL_NOT_CHOSEN 2
SPI 2237255312, message ID =-429221146
00:51:24: ISAKMP:(0:1:SW:1): sending package to 1.1.1.3 my_port 500 peer_port 500
(R) QM_IDLE
00:51:24: ISAKMP: (0:1:SW:1): purge the node-429221146
00:51:24: ISAKMP: (0:1:SW:1): node 1268073006 REAL reason «QM rejec» error suppression
Ted. "
00:51:24: ISAKMP (0:134217729): unknown IKE_MESG_FROM_PEER, IKE_QM_EXCH entry:
node 1268073006: status = IKE_QM_READY
00:51:24: ISAKMP: (0:1:SW:1): entrance, node 1268073006 = IKE_MESG_FROM_PEER, IKE_QM_
EXCH
00:51:24: ISAKMP: (0:1:SW:1): former State = new State IKE_QM_READY = IKE_QM_READY
00:51:24: % CRYPTO-6-IKMP_MODE_FAILURE: fast processing mode has failed with the counterpart
with 1.1.1.3
00:51:54: ISAKMP (0:134217729): received packet of 1.1.1.3 dport 500 sport 500
Global (R) QM_IDLE
00:51:54: ISAKMP: node set-500877443 to QM_IDLE
00:51:54: ISAKMP:(0:1:SW:1): HASH payload processing. Message ID =-500877443
00:51:54: ISAKMP:(0:1:SW:1): treatment ITS payload. Message ID =-500877443
00:51:54: ISAKMP: (0:1:SW:1): proposal of IPSec checking 1
00:51:54: ISAKMP: turn 1, AH_SHA
00:51:54: ISAKMP: attributes of transformation:
00:51:54: ISAKMP: program is 1 (Tunnel)
00:51:54: ISAKMP: type of life in seconds
00:51:54: ISAKMP: life of HIS (basic) of 28800
00:51:54: ISAKMP: type of life in kilobytes
00:51:54: ISAKMP: service life of SA (IPV) 0x0 0 x 46 0 50 x 0 x 0
00:51:54: ISAKMP: authenticator is HMAC-SHA
00:51:54: ISAKMP: (0:1:SW:1): atts are acceptable.
00:51:54: ISAKMP: (0:1:SW:1): proposal of IPSec checking 1
00:51:54: ISAKMP: turn 1, ESP_3DES
00:51:54: ISAKMP: attributes of transformation:
00:51:54: ISAKMP: program is 1 (Tunnel)
00:51:54: ISAKMP: type of life in seconds
00:51:54: ISAKMP: life of HIS (basic) of 28800
00:51:54: ISAKMP: type of life in kilobytes
00:51:54: ISAKMP: service life of SA (IPV) 0x0 0 x 46 0 50 x 0 x 0
00:51:54: ISAKMP: (0:1:SW:1): atts are acceptable.
00:51:54: IPSEC (validate_proposal_request): part #1 of the proposal
(Eng. msg key.) Local INCOMING = 1.1.1.2, distance = 1.1.1.3.
local_proxy = 10.10.10.0/255.255.255.0/0/0 (type = 4),
remote_proxy = 192.168.1.0/255.255.255.0/0/0 (type = 4),
Protocol = AH, transform = ah-sha-hmac (Tunnel),
lifedur = 0 and 0kb in
SPI = 0 x 0 (0), id_conn = 0, keysize = 0, flags = 0 x 2
00:51:54: IPSEC (validate_proposal_request): part #2 of the proposal
(Eng. msg key.) Local INCOMING = 1.1.1.2, distance = 1.1.1.3.
local_proxy = 10.10.10.0/255.255.255.0/0/0 (type = 4),
remote_proxy = 192.168.1.0/255.255.255.0/0/0 (type = 4),
Protocol = ESP, transform = esp-3des (Tunnel),
lifedur = 0 and 0kb in
SPI = 0 x 0 (0), id_conn = 0, keysize = 0, flags = 0 x 2
00:51:54: IPSEC (validate_transform_proposal): invalid local address 1.1.1.2
00:51:54: ISAKMP:(0:1:SW:1): IPSec policy invalidated proposal
00:51:54: ISAKMP:(0:1:SW:1): politics of ITS phase 2 is not acceptable! (local 1.1.1.2 re)
Mote 1.1.1.3)
00:51:54: ISAKMP: node set-701693099 to QM_IDLE
00:51:54: ISAKMP: (0:1:SW:1): Protocol to send NOTIFIER PROPOSAL_NOT_CHOSEN 2
SPI 2237255312, message ID =-701693099
00:51:54: ISAKMP:(0:1:SW:1): sending package to 1.1.1.3 my_port 500 peer_port 500
(R) QM_IDLE
00:51:54: ISAKMP: (0:1:SW:1): purge the node-701693099
00:51:54: ISAKMP: (0:1:SW:1): node-500877443 error suppression REAL reason "QM rejec.
Ted. "
00:51:54: ISAKMP (0:134217729): unknown IKE_MESG_FROM_PEER, IKE_QM_EXCH entry:
node-500877443: State = IKE_QM_READY
00:51:54: ISAKMP: (0:1:SW:1): entrance, node-500877443 = IKE_MESG_FROM_PEER, IKE_QM_
EXCH
00:51:54: ISAKMP: (0:1:SW:1): former State = new State IKE_QM_READY = IKE_QM_READY
00:52:14: ISAKMP: (0:1:SW:1): purge the node 1268073006
CCC #sh crypto isakmp his
status of DST CBC State conn-id slot
1.1.1.2 1.1.1.3 QM_IDLE 1 0 ACTIVECCC #ping 192.168.1.5
Type to abort escape sequence.
Send 5, echoes ICMP 100 bytes to 192.168.1.5, time-out is 2 seconds:00:52:44: ISAKMP: (0:1:SW:1): purge node-500877443...
00:52:50: ISAKMP (0:134217729): received packet of 1.1.1.3 dport 500 sport 500
Global (R) QM_IDLE
00:52:50: ISAKMP: node set 1186613650 to QM_IDLE
00:52:50: ISAKMP:(0:1:SW:1): HASH payload processing. Message ID = 1186613650
00:52:50: ISAKMP:(0:1:SW:1): treatment ITS payload. Message ID = 1186613650
00:52:50: ISAKMP: (0:1:SW:1): proposal of IPSec checking 1
00:52:50: ISAKMP: turn 1, AH_SHA
00:52:50: ISAKMP: attributes of transformation:
00:52:50: ISAKMP: program is 1 (Tunnel)
00:52:50: ISAKMP: type of life in seconds
00:52:50: ISAKMP: life of HIS (basic) of 28800
00:52:50: ISAKMP: type of life in kilobytes
00:52:50: ISAKMP: service life of SA (IPV) 0x0 0 x 46 0 50 x 0 x 0
00:52:50: ISAKMP: authenticator is HMAC-SHA
00:52:50: ISAKMP: (0:1:SW:1): atts are acceptable.
00:52:50: ISAKMP: (0:1:SW:1): proposal of IPSec checking 1
00:52:50: ISAKMP: turn 1, ESP_3DES
00:52:50: ISAKMP: attributes of transformation:
00:52:50: ISAKMP: program is 1 (Tunnel)
00:52:50: ISAKMP: type of life in seconds
00:52:50: ISAKMP: life of HIS (basic) of 28800
00:52:50: ISAKMP: type of life in kilobytes
00:52:50: ISAKMP: service life of SA (IPV) 0x0 0 x 46 0 50 x 0 x 0
00:52:50: ISAKMP: (0:1:SW:1): atts are acceptable.
00:52:50: IPSEC (validate_proposal_request): part #1 of the proposal
(Eng. msg key.) Local INCOMING = 1.1.1.2, distance = 1.1.1.3.
local_proxy = 10.10.10.0/255.255.255.0/0/0 (type = 4),
remote_proxy = 192.168.1.0/255.255.255.0/0/0 (type = 4),
Protocol = AH, transform = ah-sha-hmac (Tunnel),
lifedur = 0 and 0kb in
SPI = 0 x 0 (0), id_conn = 0, keysize = 0, flags = 0 x 2
00:52:50: IPSEC (validate_proposal_request): part #2 of the proposal
(Eng. msg key.) Local INCOMING = 1.1.1.2, distance = 1.1.1.3.
local_proxy = 10.10.10.0/255.255.255.0/0/0 (type = 4),
remote_proxy = 192.1.68.1.0/255.255.255.0/0/0 (type = 4),
Protocol = ESP, transform = esp-3des (Tunnel),
lifedur = 0 and 0kb in
SPI = 0 x 0 (0), id_conn = 0, keysize = 0, flags = 0 x 2
00:52:50: IPSEC (validate_transform_proposal): invalid local address 1.1.1.2
00:52:50: ISAKMP:(0:1:SW:1): IPSec policy invalidated proposal
00:52:50: ISAKMP:(0:1:SW:1): politics of ITS phase 2 is not acceptable! (local 1.1.1.2 re)
Mote 1.1.1.3)
00:52:50: ISAKMP: node set-1113601414 to QM_IDLE
00:52:50: ISAKMP: (0:1:SW:1): Protocol to send NOTIFIER PROPOSAL_NOT_CHOSEN 2
SPI 2237255312, message ID =-1113601414
00:52:50: ISAKMP:(0:1:SW:1): sending package to 1.1.1.3 my_port 500 peer_port 500
(R) QM_IDLE
00:52:50: ISAKMP: (0:1:SW:1): purge the node-1113601414
00:52:50: ISAKMP: (0:1:SW:1): node 1186613650 REAL reason «QM rejec» error suppression
Ted. "
00:52:50: ISAKMP (0:134217729): unknown IKE_MESG_FROM_PEER, IKE_QM_EXCH entry:
node 1186613650: status = IKE_QM_READY
00:52:50: ISAKMP: (0:1:SW:1): entrance, node 1186613650 = IKE_MESG_FROM_PEER, IKE_QM_
EXCH
00:52:50: ISAKMP: (0:1:SW:1): former State = new State IKE_QM_READY = IKE_QM_READY
00:52:50: % CRYPTO-6-IKMP_MODE_FAILURE: fast processing mode has failed with the counterpart
with 1.1.1.3.
Success rate is 0% (0/5)
CCC #.
00:53:20: ISAKMP (0:134217729): received packet of 1.1.1.3 dport 500 sport 500
Global (R) QM_IDLE
00:53:20: ISAKMP: node set 459446741 to QM_IDLE
00:53:20: ISAKMP:(0:1:SW:1): HASH payload processing. Message ID = 459446741
00:53:20: ISAKMP:(0:1:SW:1): treatment ITS payload. Message ID = 459446741
00:53:20: ISAKMP: (0:1:SW:1): proposal of IPSec checking 1
00:53:20: ISAKMP: turn 1, AH_SHA
00:53:20: ISAKMP: attributes of transformation:
00:53:20: ISAKMP: program is 1 (Tunnel)
00:53:20: ISAKMP: type of life in seconds
00:53:20: ISAKMP: life of HIS (basic) of 28800
00:53:20: ISAKMP: type of life in kilobytes
00:53:20: ISAKMP: service life of SA (IPV) 0x0 0 x 46 0 50 x 0 x 0
00:53:20: ISAKMP: authenticator is HMAC-SHA
00:53:20: ISAKMP: (0:1:SW:1): atts are acceptable.
00:53:20: ISAKMP: (0:1:SW:1): proposal of IPSec checking 1
00:53:20: ISAKMP: turn 1, ESP_3DES
00:53:20: ISAKMP: attributes of transformation:
00:53:20: ISAKMP: program is 1 (Tunnel)
00:53:20: ISAKMP: type of life in seconds
00:53:20: ISAKMP: life of HIS (basic) of 28800
00:53:20: ISAKMP: type of life in kilobytes
00:53:20: ISAKMP: service life of SA (IPV) 0x0 0 x 46 0 50 x 0 x 0
00:53:20: ISAKMP: (0:1:SW:1): atts are acceptable.
00:53:20: IPSEC (validate_proposal_request): part #1 of the proposal
(Eng. msg key.) Local INCOMING = 1.1.1.2, distance = 1.1.1.3.
local_proxy = 10.10.10.0/255.255.255.0/0/0 (type = 4),
remote_proxy = 192.168.1.0/255.255.255.0/0/0 (type = 4),
Protocol = AH, transform = ah-sha-hmac (Tunnel),
lifedur = 0 and 0kb in
SPI = 0 x 0 (0), id_conn = 0, keysize = 0, flags = 0 x 2
00:53:20: IPSEC (validate_proposal_request): part #2 of the proposal
(Eng. msg key.) Local INCOMING = 1.1.1.2, distance = 1.1.1.3.
local_proxy = 10.10.10.0/255.255.255.0/0/0 (type = 4),
remote_proxy = 192.168.1.0/255.255.255.0/0/0 (type = 4),
Protocol = ESP, transform = esp-3des (Tunnel),
lifedur = 0 and 0kb in
SPI = 0 x 0 (0), id_conn = 0, keysize = 0, flags = 0 x 2
00:53:20: IPSEC (validate_transform_proposal): invalid local address 1.1.1.2
00:53:20: ISAKMP:(0:1:SW:1): IPSec policy invalidated proposal
00:53:20: ISAKMP:(0:1:SW:1): politics of ITS phase 2 is not acceptable! (local 1.1.1.2 re)
Mote 1.1.1.3)
00:53:20: ISAKMP: node set-1692074376 to QM_IDLE
00:53:20: ISAKMP: (0:1:SW:1): Protocol to send NOTIFIER PROPOSAL_NOT_CHOSEN 2
SPI 2237255312, message ID =-1692074376
00:53:20: ISAKMP:(0:1:SW:1): sending package to 1.1.1.3 my_port 500 peer_port 500
(R) QM_IDLE
00:53:20: ISAKMP: (0:1:SW:1): purge the node-1692074376
00:53:20: ISAKMP: (0:1:SW:1): REAL reason for node deletion 459446741 error "reject QM.
Ed ".
00:53:20: ISAKMP (0:134217729): unknown IKE_MESG_FROM_PEER, IKE_QM_EXCH entry:
node 459446741: status = IKE_QM_READY
00:53:20: ISAKMP: (0:1:SW:1): entrance, node 459446741 = IKE_MESG_FROM_PEER, IKE_QM_E
XCH
00:53:20: ISAKMP: (0:1:SW:1): former State = new State IKE_QM_READY = IKE_QM_READY
00:53:40: ISAKMP: (0:1:SW:1): purge the node 1186613650
00:53:42: % LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, chang
State of Ed down
00:54:10: ISAKMP: (0:1:SW:1): purge the node 459446741===============================================================================
6.2 (2) version PIX
ethernet0 nameif outside security0
nameif ethernet1 inside the security100
activate 8Ry2YjIyt7RRXU24 encrypted password
2KFQnbNIdI.2KYOU encrypted passwd
pixfirewall hostname
domain ciscopix.com
fixup protocol ftp 21
fixup protocol http 80
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol they 389
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol sip 5060
fixup protocol 2000 skinny
names of
permit 192.168.1.0 ip access list outside_cryptomap_20 255.255.255.0 10.10.10.0
255.255.255.0
permit 192.168.1.0 ip access list inside_outbound_nat0_acl 255.255.255.0 10.10.1
255.255.255.0 0.0
pager lines 24
interface ethernet0 10baset
interface ethernet1 10full
Outside 1500 MTU
Within 1500 MTU
1.1.1.3 outside IP address 255.255.255.0
IP address inside 192.168.1.1 255.255.255.0
alarm action IP verification of information
alarm action attack IP audit
location of PDM 10.10.10.0 255.255.255.0 inside
location of PDM 10.10.10.0 255.255.255.0 outside
PDM logging 100 information
history of PDM activate
ARP timeout 14400
Global 1 interface (outside)
NAT (inside) 0-list of access inside_outbound_nat0_acl
NAT (inside) 1 0.0.0.0 0.0.0.0 0 0
Route outside 0.0.0.0 0.0.0.0 1.1.1.2 1
Timeout xlate 0:05:00
Timeout conn 0 half-closed 01:00:10: 00 udp 0:02:00 CPP 0: h323 from 10:00 0:05:00 TR
p 0:30:00 sip_media 0:02:00
Timeout, uauth 0:05:00 absolute
GANYMEDE + Protocol Ganymede + AAA-server
RADIUS Protocol RADIUS AAA server
AAA-server local LOCAL Protocol
Enable http server
http 192.168.1.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
SNMP-Server Community public
No trap to activate snmp Server
enable floodguard
Permitted connection ipsec sysopt
No sysopt route dnat
Crypto ipsec transform-set Petaluma_VPN ah-sha-hmac esp-3des
outside_map 20 ipsec-isakmp crypto map
card crypto outside_map 20 match address outside_cryptomap_20
card crypto outside_map 20 peers set 1.1.1.2
card crypto outside_map 20 game of transformation-Petaluma_VPN
outside_map interface card crypto outside
ISAKMP allows outside
ISAKMP key * 1.1.1.2 address netmask 255.255.255.255 No.-xauth No.-config-m
Ode
part of pre authentication ISAKMP policy 20
ISAKMP policy 20 3des encryption
ISAKMP policy 20 md5 hash
20 2 ISAKMP policy group
ISAKMP duration strategy of life 20 86400
Telnet timeout 5
SSH timeout 5
dhcpd address 192.168.1.5 - 192.168.1.33 inside
dhcpd lease 3600
dhcpd ping_timeout 750
dhcpd outside auto_config
dhcpd allow inside
Terminal width 80
Cryptochecksum:8c0d4948407071d3515f1546cf8bc147
: end
pixfirewall #.
=========================================================================
CCC #sh run
Building configuration...Current configuration: 1328 bytes
!
version 12.4
horodateurs service debug uptime
Log service timestamps uptime
no password encryption service
!
CCC host name
!
boot-start-marker
start the system flash c2600-adventerprisek9 - mz.124 - 25d.bin
boot-end-marker
!
!
No aaa new-model
no location network-clock-participate 1
No network-clock-participate wic 0
IP cef
!
!
!
!!
!
!
crypto ISAKMP policy 2
BA 3des
md5 hash
preshared authentication
Group 2
address key crypto isakmp 1.1.1.3 cisco123
!
!
Crypto ipsec transform-set Petaluma_VPN ah-sha-hmac esp-3des
!
map Petaluma_1 1 ipsec-isakmp crypto
defined peer 1.1.1.3
game of transformation-Petaluma_VPN
match address 100
!
!
!
!
interface FastEthernet0/0
1.1.1.2 IP 255.255.255.0
automatic speed
Half duplex
!
interface Serial0/0
no ip address
Shutdown
clock speed of 56000
!
interface FastEthernet0/1
10.10.10.2 IP address 255.255.255.0
automatic duplex
automatic speed
card crypto Petaluma_1
!
IP forward-Protocol ND
IP route 192.168.1.0 255.255.255.0 1.1.1.3
!
!
no ip address of the http server
no ip http secure server
!
access-list 100 permit ip 10.10.10.0 0.0.0.255 192.168.1.0 0.0.0.255
control plan
!
!
!
!
!
!
!
!
!
!
Line con 0
line to 0
line vty 0 4
opening of session
!
!
endCCC #.
!
!
!
crypto ISAKMP policy 2
BA 3des
md5 hash
preshared authentication
Group 2
address key crypto isakmp 1.1.1.3 cisco123
!
!
Crypto ipsec transform-set Petaluma_VPN ah-sha-hmac esp-3des
!
map Petaluma_1 1 ipsec-isakmp crypto
defined peer 1.1.1.3
game of transformation-Petaluma_VPN
match address 100
!
!
!
!
interface FastEthernet0/01.1.1.2 IP 255.255.255.0
automatic speed
Half duplex
!
interface Serial0/0
no ip address
Shutdown
clock speed of 56000
!
interface FastEthernet0/1
10.10.10.2 IP address 255.255.255.0
automatic duplex
automatic speed
card crypto Petaluma_1
!
IP forward-Protocol ND
IP route 192.168.1.0 255.255.255.0 1.1.1.3
!
!
no ip address of the http server
no ip http secure server
!
access-list 100 permit ip 10.10.10.0 0.0.0.255 192.168.1.0 0.0.0.255Hi David,
Overlooking the configuration of the router, it seems that you have applied the encryption card to the wrong interface.
interface FastEthernet0/0
1.1.1.2 IP 255.255.255.0
automatic speed
Half duplex
!
interface FastEthernet0/1
10.10.10.2 IP address 255.255.255.0
automatic duplex
automatic speed
card crypto Petaluma_1
Given that the pix will attempt to build a VPN tunnel to 1.1.1.2 map encryption Petaluma_1 must be applied to FastEthernet0/0, not FastEthernet 0/1.
Let me know if it helps.
Thank you
Loren
-
Need help with the operation of Flash site after new servers of names
Can not get the Gaia site is working on a new server
" on: today at 15:10:35.
Quote Modifier Enlever Hello. Recently, I went from 1 & 1 shared hosting to a new webhost, holistic.
My Flash (based on the Gaia framework) website does not work now.
The use of the Flash Player debugger, I got the following error:
hand: view.scaleX = 0.9041666666666667 and view.scaleY = 1.0129032258064516
hand: view.x = 0 and view.y = 0
Error: Cannot load the xmlsocket://127.0.0.1:5800 policy file
Error: request for resource at the xmlsocket://127.0.0.1:5800 by the applicant of http://www.yourgods.com/bin/main.swf failed because the server isn't reachable.
Security Sandbox Violation
127.0.0.1:5800 interrupted connection - not allowed to http://www.yourgods.com/bin/main.swf
Error: request for resource at the xmlsocket://127.0.0.1:5800 by the applicant of http://www.yourgods.com/bin/main.swf failed because the server isn't reachable.
Even though I've set allowscriptaccess forever in my index.html received this note:
Warning: AllowScriptAccess = "never" found in HTML. This parameter is obsolete and ineffective. See http://www.adobe.com/go/allowscriptaccess for more details.
Warning: 'com' has no property 'onEnterFrame '.
Regarding the violation of the Security Sandbox, my old Web host was of 1 & 1 and they are always the YourGods.com official registration office - but I now YourGods.com pointed at the DomainNameServers to my new host, holistic, who specializes in Drupal and has no experience with Flash - so I hope you'll bear with me and offer what advice you can because they said that I was basically on my own for any Flash troubleshooting problems.
Who is likely to be the source of my problem (that I am 'pointing' only for name servers and only "stored" my domain name with the new host instead of transfer completely?
And if so, I just need to create a strategy cross-domain like this xml file and leave it on my old Web host?
<? XML version = "1.0"? >
< cross-domain-policy >
< allow-access-from domain = "MyNewDedicatedIPAddressHere" / >
< / cross-domain-policy >
I have never dealt with this kind of things cross-domain before any help would be appreciated.
I don't have an exact answer...
But if I'm not wrong, everything
": / / 127.0.0.1:5800.
resources referrences on your local machine... NOT on your server.
So I guess you have problems of multiple paths
You should be able to test ALL of your pages using an http address provided by your new host BEFORE you go to DNS. If you do not understand this statement... contact your new host and ask them to explain.
Best wishes
Adninjastrator
-
I need help with the debugging of a gallery of images created in flash.
I created this gallery which is assumed that the user can click on a button last or next to goto the image of another. However, when I open the .swf sound loop. Here my script below. Could someone please provide some assistance? Thanks in advance.
Stop();
Next button
next_btn.onPress = Function)
{
if(mc_content._currentframe==mc_content._totalframes)
{
mc_content.gotoAndStop (1)
} else {}
mc_content.nextFrame)
}
}last button
last_btn.onPress = Function)
{
if(mc_content._currentframe==1)
{
mc_content.gotoAndStop (mc_content._totalframes)
} else {}
mc_content.prevFrame)
}
}Try going into your publication of Flash settings and select your version of actionscript AS2.
-
Need help with the site of Editions for a friend - Thnx
Hello
I recently got in creating websites so I am pretty new to this, Ive created a site for a friend with dreamweaver CS5 and it looks pretty awesome I also published the site using dreamweaver. Then a few weeks later, my friend started telling me to put new images etc. because it is not familiar with dreamweaver and guys its becomes a bit boring. I want him to be able to post pictures and texts on his own, but I do not know how, someone told me that other cms joomla. And the noob I am I couldn't understand oy what are these programs... Anyone has any advice, tutorials or something useful please share it with me.
Thnx in andvance and sorry if spelling is a bit messy enlish is my 3rd language.
Viktoriya El Madhoun wrote:
I have a major in mathematics and science
Huumm... he need more money both of those in the design of Web site.
Viktoriya El Madhoun wrote:
I plan to learn flash too, Whats ure opinion on flash, Ive been reading online and many people say it's a dying art? Should I learn, or just ignore it?
As John says, I would not bother. Flash does not work on the iphone or the ipad is a reading in which direction he's going.
The big money is to know a language like php/mysql server, so if you can get your head around those and combine it with your in-depth knowledge of html/css, it will give you a great competitive advantage.
Many more customers now wonder for Web sites with a sort of interactivilty. To offer those you must know an inner language server outwards or you will be limited to base sites, which can produce zillions of others.
-
Need help with the ip configuration on/etc/hosts for the installation of 11 GR 2 on linux vmware 6 on win7.
Let me know if you need more info... in fact I have a setting error while installation said
-(/ etc/hosts has no correct entry for the host name)
Host: 192.168.85.100
Win7 ip: 192.168.1.x
Thank you...
(host computer)
Win7 64 bit
(vmware)
Oracle Linux Server 6.3 version
Release of Red Hat Enterprise Linux Server 6.3 (Santiago)
Oracle Linux Server 6.3 version
-(/ etc/hosts has no correct entry for the host name)
Then post your/etc/hosts.
Host: 192.168.85.100
Win7 ip: 192.168.1.x
Why 85? have you tried 192.168.1.100?
-
I need help with the program of Photos on my macbook pro
I use a Macbook Pro with OS of Yosemite. I really need help with the Photo program. I never really got the hang of IPhoto and now that it's a new program, I'm really confused. Where can I go to learn this without waiting for the next workshop in a local store?
Hi, I'm fighting to open same mine, making a new software update
-
Original title: need help with the blue screen issue
My computer turns saying a blue screen: a problem has been detected and windows were shut down to prevent damage. The problem seems to be caused by the following file: NAVEXI5. SYS PAGE_FAULT_IN_NONPAGED_AREA he seems to have a different error whenever he turns to a blue screen. Can someone help me please.Hello
1. Since when are you facing this problem?
2. you remember to make changes to the system?
3. do you get an error with this error code?I suggest to unplug external devices such as printer, scanner, etc. that are plugged into the system, and then restart the system and check if the problem persists.
Method 1.
I suggest you to do a check disk from the recovery console and check if the problem is resolved. Follow the steps mentioned below.
a. start into the recovery console using the XP CD. Follow the steps mentioned in the article below.
Description of the Windows XP Recovery Console for advanced users
http://support.Microsoft.com/kb/314058
b. perform a disk check.
How to perform disk error checking in Windows XP
http://support.Microsoft.com/kb/315265Method 2.
I suggest you to start with the XP CD and then do a system restore. Follow the steps mentioned in the article below.
How do I recover from a corrupted registry that prevents Windows XP startup
http://support.Microsoft.com/kb/307545I hope this helps.
-
I'm on Acrobat 10 for mac and I need help with the distribution of shape feature. Is there a way to change the registration e-mail download addressed to the? Currently all forms I create and then distribute may only be subjected to my email account... I appreciate any help!
Do not use the feature distribute the form. Instead of this, just put up a button "submit" and configure it to send email using any email address you want. Just add a button and set the action of the mouse upward on "Submit a form" and use a type mailto URL and specify that you want to send the full PDF. Then activate the reader of the document: where "Advanced/extended features in Adobe Reader" is located in Acrobat XI?
If you really want to use distribute the form for some reason, change the e-mail address in your preferences: Edit > Preferences > identity > Email address
-
Hello need help with the opacity mask.
Hello need help with the opacity mask. I hope someone out there can help
I inherited a logo that appears to use a Logo of OM has a shape with a grad. This grad at first sight is not used in the Grad scheme and there is not editable. Looking at the transparency palette I find an OM (pic1) output option. If I choose what the grad on separates it from the page of the form, that is from there I can change/remove as required (Note2).
However, sometimes (he did no change), I'll be back to the same original form and output option is grayed out and is no longer available. Or I go to the similar shape that has the same treatment and I can't go out OM (pic3)
The only difference is the thumbnail in the transparency palette, which is strong in pic1 and rated on pic3. What Miss me? I'm not clear what the advantage is simply OM using the Grad palette to apply a grad in my form, but until I can get rid of OM who is there, I can't comfortably apply to the grad I want.
The white gradient LHS I have no problem with. I choose fortunately only and each time get the possibility of release of OM.
The other thing weird. When I select the white gradient. Sometimes, the exit option is in the palette without going through the drop-down list (Fig 4).
Other times seems not that OM has already been applied, because the palette gives me the ability to mask rather than liberation (5 photos). Until I go to the drop down and then I find Release is an option after all.
What is the difference here? Not much of a problem, because either way I can release OM to be able to change the grad.
The file is passed through several hands and play anywhere to try to resolve issues, and many stops and save slot, so something along the line was of course done a logo and not the other because of the difference, but I can't for the life of me see what that.
I hope someone can help. Very appreciated
See you soon
Dave
Dave,
I've (mis) understanding the issues, you can account for the box to the right in the main palette transparency (called thumbnail) here.
Illustrator help | Transparency and blending modes
represents the masking objects.
Some of your screenshots show no object mask, so it only is not really a mask even if do the opacity mask has been clicked and there seems to be one in the layers palette, wherever you look.
I think that it is perhaps the issue.
-
Making the ear of corn and need help with the ball.
I do some corn on the COB for an illustration and I need help with the texture of the ball. I've been slowly making progress with gradient for kernels mesh, but I can't seem to recreate the look of the ball at all. I tried to recreate it in a rectangle by using the option in the menu object (1 row, 50 columns) gradient mesh and I'm trying with the fusion in object mode, but not lucky yet. Can someone help to put me on the right track to make the texture:
I've been slowly making progress with gradient for kernels mesh, but I can't seem to recreate the look of the ball at all.
Tank,
You have published three images stylistically very different. The first is photographic and call probably (but not necessarily) for graduates of mesh. The other two are graphical treatments (and frankly, they're both rather flat; lack of depth).
Illustration style extends the range of cartoonish in sketchy photo-realism and all the rest. The problem is you didn't show your own attempt so that anyone can have an idea of what you're trying to achieve the stylistic point of view.
I just need to put in place so that the final step does not appear the whole box. The problem now is trying to make the style of the good brush to reproduce the effect...
You seem to think you have to build a kind of linear construction and then find a way to reshape the shape of each part of the leaf. Yes, you pouvez approach it this way, but Illustrator users has often tend to be what aunt Molly would call "too clever by half."
Not everything must be something semi intelligent auto or complex and tedious consruct involving brushes, envelopes, masks, etc, etc. Much can be accomplished by thinking that he just thanks to measure you draw directly economic paths and constructions, which take no more time (often less) and result in very tidy, simple files. Again, a lot depends on what you are trying to achieve the stylistic point of view. But here's an example that only took a few minutes to draw:
If the above consists of:
Three roads closed, 8 points each, with ordinary linear degrees
Three mixtures of open path with three anchor points for each key path
Six paths closed for shadows / highlights, with 19 points in total
Mixtures being directly from the paths drawn comic forms, the spacing of the veins 'automatically' and intuitively follows the width from point of view of the worksheet.
Rather than to build a boilerplate brush, colouring and the weight of each of the three main paths of the vein mixtures can be set individually at any time, simply directly by selecting the key path.
JET
-
I need help with the control of two .swf in third.
Hi, thanks for reading!
I need help with the control of two .swf in third.
I have a problem when I need to use a .swf in a digital signage solution, but were advised by the Legal Department, it cannot be changed in any way, I can not also have the source file blah blah blah. I pulled the .swfs on their site and I decompiled to see what I was up against.
The main SWF that I need control is HCIC.swf and the problem is that it starts with a preloader, which, after the loading stops on a framework that requires user input to (button) on a play button, until the film will proceed and replay.
What I've done so far is to create a SWF container, HCIC_container.swf, which will serve as a target for the HCIC.swf and I would like to send actionscript in the file, I am not allowed to edit.
I managed to get done with help from someone on another forum. It is my hope that the following script just start HCIC.swf a framework after the preloader and button play and just play through.
var container: MovieClip = createEmptyMovieClip ("container", getNextHighestDepth());
var mcLoader:MovieClipLoader = new MovieClipLoader();
mcLoader.addListener (this);
mcLoader.loadClip ("MCIC.swf", container);
function onLoadInit(mc:MovieClip) {}
mc.gotoAndPlay (14);
}
But unfortunately it does not solve my problem. Because there is a media - controller.swf, which is charged by HCIC.swf who has orders, including the play button to start HCIC.swf.
Here is a link to a .zip with all 3 files .swf file and all 3 .fla files.
http://www.axiscc.com/temp/HCIC.zip
What I have to do is to automatically start the HCIC.swf file, bypassing the pre-loader and play button without having to edit it or in the media - controller.swf in any case. Thus, all scripts must be done in HCIC_container.swf.
I know it is confusing and it is difficult to explain, but if you look at the files it must make sense.
ActionScripting is far from my point hard, so I'm definitely over my head here.
Thanks for your help.Got my solution on another forum.
-
Need help with the installation of an adapter of graphics Super Palit GeForce 9500GT - 512 MB - DDR2 SDRAM in a M2N68 motherboard (narra6). Should I disable the onboard graphics in the bios? When the card is installed, no VGA work outs and the PC does not start. Checked and recontroler implementation of the card in the PCI slot. PC is a desktop HP G5200uk PC. Windows 7 operating system.
Hello
The link below is a guige to install a video card in your Pc. In particular, it seems that you will have to perhaps specify the location of the new card in the bios and save this change before you install the new card - see step 4 in the guide on the link below. If your new card fits into the PCI Express x 16 slot, you will need to define PCI Express in the bios and save the changes.
http://support.HP.com/us-en/document/c01700855
Kind regards
DP - K
-
need help with the mac version of PES
need help with the mac version of PES
If you follow the 7 steps you can dl a trial via the links here: http://prodesigntools.com/tag/ddl
and activate it with your serial number.
If you have a problem dl'g, you don't follow all 7 steps. the most common mistake is not meticulously follow the steps 1, 2, and/or 3 (which adds a cookie to your system, allowing you to download the correct version of the adobe.com site).
p.s. If you need a more direct link, you must specify the exact version you want.
Maybe you are looking for
-
When I go to some web sites, I can't some of their links or buttons to work. For example, I can't "vote" and see the results on the MSN home page or go to my account on the homepage of Ancestry.com. Some links work, but others do not. They do not wor
-
Where have bookmark go all the tabs feature?
I use Favorites. I especially like the feature "to bookmark all tabs. FF 4.0 is no longer allows me to do this. I use this function so I'd stop using FF 4.0, if I can't have it back. LaHaye
-
The sound of my laptop (HP Pavilion series 7g) Windows 7 went all of a sudden and I don't know how to fix... I try any (Manager of device, mixer and other things) but nothing... The strange thing is that when I put my headphones the sound is ok... No
-
I can't copy files or pictures on disk.
Ideas: I can't copy files or pictures on disk. In "My pictures", for example, on the left side under 'images', it was the option 'Copy this image to CD', or something very similar. This option is gone. Same problem in all files and folders - under "f
-
system will not load or repair, missing operating system loader. How to fix?
system has not worked since the update. fault of lack of shows os loader. How can I fix the problem. ; -j