Need help with the implementation of a replacement airport Time Capsule

Similar Questions

• Need help with the OSB Assign and replace the

  I have a proxy service that receives the SOAP message:

  " < = xmlns:soapenv soapenv:Envelope ' http://schemas.xmlsoap.org/SOAP/envelope/ "xmlns:SOAP - ENC =" " http://schemas.xmlsoap.org/SOAP/encoding/ "container =" " http://www.w3.org/1999/XMLSchema ">

  " < = xmlns:soapenv soapenv:Header ' http://schemas.xmlsoap.org/SOAP/envelope/ ">

  < / soapenv:Header >

  < soapenv:Body >

  " < pidx:OrderChange pidx:transactionPurposeIndicator = 'Replace' xmlns:pidx = ' http://www.API.org/pidXML "xmlns =" http://www.API.org/pidXML "" xmlns: xsi = " http://www.w3.org/2001/XMLSchema-instance "xsi:schemaLocation="C:\shareIt\OrderChange_1-2.xsd" > ""

  ...

  < / pidx:OrderChange >

  " < = Xmlns:ocp DeliveryInformation ' http://www.digitaloilfield.com/OCP ">

  ...

  < / DeliveryInformation >

  < / soapenv:Body >

  < / soapenv:Envelope >

  I need to take the OrderChange element and place it in a SOAP body and the DeliveryInformation element and place it in the SOAP of the same SOAP message header.

  The SOAP message is then sent to a business service that makes an HTTP POST of the SOAP XML.

  I created the service of the company and he sent some data test SOAP and it works very well, but cannot create a bridge between the Proxy and the Business Service.

  In the stream of messages of Proxy I tried to do an assignment in a routing. I tried to do the following:

  1. an XQuery query transform to generate the XML SOAP just described

  2. not the entitlement where the "Expression" is the transformation and the Variable is a variable based on a schema for SOAP.

  I can see that the company is trying to be invoked, but the SOAP data does not have to be formatted or passed.

  It is the right approach or is their a better way of

  1. create the SOAP wrapped XML

  2. call the Business Service.

  Any suggestions are appreciated. I can provide more detail if necessary.

  Kind regards.

  Thank you Vlad...

  I think I'm getting in that direction now. Just do some debugging.

  Appreciate the input. I will update with final results.

  Again, your help is greatly appreciated.

  Kind regards.

• Need help with the implementation of a VPN to bypass the port forwarding to access my web server

  Pretty much as the title suggests, but it's probably not clear enough. Let me explain:
  I want to host a Web site on my computer. Not another major, but something small and private.

  Before you set up a domain name, I want to make sure the site works - which it is not.
  I am currently using WAMPServer to organize it all.

  I put it so when I connect to localhost, I have access to all my files in the directory, regardless of whether or not I'm "online" or "offline" on WAMPServer (or not, others will have access to my Web page).

  When I turn WAMPServer 'on-line', it allows the connection of my WAMPServer homepage through both localhost and connection through the static IP address, I put in place, but only in LAN, meaning that only computers connected to my home network would have access to the page.

  My router cannot be configured to allow port forwarding for can I open a port to allow redirection to my computer, rather than the ambiguous router itself. As an alternative, I downloaded Hamachi to allow a computer to connect to the VPN (Hamachi) and, by extension, my IP for access to files in the directory.

  In theory, it should work, but it didn't. In my local network computers could still connect to the IP address, but the computer in the virtual private network, but not on the local network could not.

  Is there something I'm missing here, or is there any suggestions to make this work?

  Note:
  My works of static IP as what it is, however, it is different from the IP address used in Hamachi. If I change the IP address used by my computer to access the site to the IP address that uses my Hamachi, would that work? As another suggestion, can I change my static IP setting is automatic and change one used on WAMPServer (from localhost, allowing the connection to bring) than on Hamachi? Or I do all three IP addresses the same?

  Thanks for all the help and solutions,
  Elgo

  Domain/server/business questions are best addressed @ Technet.  Answers is more connected consumer.

  http://social.technet.Microsoft.com/forums/en-us/categories/

• need help with the implementation of the DR site?

  Dear all,

  I have two sites one is the main and the second is Dr. I take the backup of the main site using vmware data recovery. but I read the article that data recovery just take its virtual machine backup local site. I want that this backup is to reproduce the secondary DR site so that if a failure occur on the primary site VMS Act on the website of DR.

  is there any solution for that I used the backup tool even without using the Site Recovery manager.

  the main site contains six esxi host physical and high school contains four esxi host.

  You can use 2 camera.

  Or one with 2 destinations.

  But IMHO, is not so simple, so (if you must give the procedure for a normal user) consider using other tools, such as Veeam Backup and Replicator.

  André

• Need help with the implementation of K1/K2

  We have just added a map of K2 to our Server 5.5 and I try to allocate 512 MB of video RAM for each virtual computer. I have configured the virtual computer to use 3D and 512, and then I set up the pool for use 512 use automatic 3D settings. Looks like they're grabbing 256 instead?

  ~ # gpuvm

  Xserver unix: 0, 0:5:0:0 PCI ID, maximum memory of GPU 4173824 KB

  The NEST 123462, VM "GRG000-V02", reserved 262144KB of memory GPU.

  PID 113528, "StandardG-V02" VM, reserved 131072KB of memory GPU.

  GPU memory left Ko 3780608.

  Xserver unix: 1, PCI ID 0:6:0:0, maximum memory of GPU 4173824 KB

  PID 95843, VM "GRG000-V01", reserved 262144KB of memory GPU.

  GPU memory left Ko 3911680.

  Also, when you look at 'nvidia-smi' I never see nothing appear in the section 'calculation process. Isn't this vDGA?

  +-----------------------------------------------------------------------------+

  | Calculate the process: GPU memory.

  |  Name of the process PID GPU use |

  |=============================================================================|

  |  Without execution calculate found process |

  +-----------------------------------------------------------------------------+

  Only the hectarlv of memory will be allocated to the GPU, the rest of normal memory.

  There is no listed calculation process, it is only for GPU Compute workloads, not graphics.

  Linjo

• Need help with the creation of a research or time slider bar

  Hello!
  
  I have three scenes in my fla and I want to create a time slider that shows the current framework of playing time and the total time of the image. Can someone help me on this.
  
  Thank you
  

  I made a few changes...

  Creates:
  txtFrameStatus
  TextField: html and multiline.

  mcBar
  A mc with a horizontal bar.

  VARs
  var movieFPS:Number = 12; Here set the FPS
  var porcent:Number;
  var currentFrame:Number;
  var totalFrames:Number;
  var totalSeconds:Number;
  var currentSeconds:Number;
  var textTime:String;

  function that presents information
  this.onEnterFrame = function (): Void {}
  currentFrame = _currentframe;
  totalFrames = _totalframes;
  us = Math.floor ((currentFrame / totalFrames) * 100);
  totalSeconds = Math.floor(totalFrames / 12);
  currentSeconds = Math.floor(currentFrame / 12);

  var cSeconds:Number = currentSeconds % 60; cSeconds = (cSeconds< 10)="">
  '0' + cSeconds: cSeconds;
  var cMinutes:Number = Math.floor(currentSeconds / 60); cMinutes =
  (cMinutes< 10)="" "0"="" +="" cminutes="" :="">

  var tSeconds:Number = totalSeconds % 60; (tSeconds = tSeconds< 10)="">
  '0' + tSeconds: tSeconds;
  var tMinutes:Number = Math.floor(totalSeconds / 60); tMinutes =
  (tMinutes< 10)="" "0"="" +="" tminutes="" :="">

  textTime = "Total images:" + totalFrames + "."
  ";
  textTime += "current Frame:" + currentFrame + "."
  ";
  textTime += "us:" + us + '%' + "."
  ";
  textTime += ' time Total: "+ tMinutes +": "+ tSeconds +". "
  ";
  textTime += ' current time: "+ cMinutes +": "+ cSeconds;"

  txtFrameStatus.htmlText = textTime;

  mcBar._xscale = us;

  if(porcent == 100) delete this.onEnterFrame;
  };

  --
  Kind regards
  Erick Souza
  www.ericksouza.com

• Need help with the installation of an adapter of Palit GeForce 9500GT Super chart - 512 MB in a M2N68 (narrated

  Need help with the installation of an adapter of graphics Super Palit GeForce 9500GT - 512 MB - DDR2 SDRAM in a M2N68 motherboard (narra6). Should I disable the onboard graphics in the bios? When the card is installed, no VGA work outs and the PC does not start. Checked and recontroler implementation of the card in the PCI slot. PC is a desktop HP G5200uk PC. Windows 7 operating system.

  Hello

  The link below is a guige to install a video card in your Pc.  In particular, it seems that you will have to perhaps specify the location of the new card in the bios and save this change before you install the new card - see step 4 in the guide on the link below.  If your new card fits into the PCI Express x 16 slot, you will need to define PCI Express in the bios and save the changes.

  http://support.HP.com/us-en/document/c01700855

  Kind regards

  DP - K

• I need help with the program of Photos on my macbook pro

  I use a Macbook Pro with OS of Yosemite. I really need help with the Photo program. I never really got the hang of IPhoto and now that it's a new program, I'm really confused. Where can I go to learn this without waiting for the next workshop in a local store?

  Hi, I'm fighting to open same mine, making a new software update

• Need help with the launching track pack for forza code 4

  Bought new Forza 4 and the lancer Track Pack code does not work, how do I get a code that is generated in the form I've already paid for it. Rank of loads of numbers and sent 10 s of emails but cant seem to get help.
  
  This is the help I get when the cat to an Ambassador xbox on xbox.com
  
  Terry wrote:
  Need help with the launching track pack for forza code 4
  The Xbox Ambassador says:
  Location of Ambassador of the community...
  The Xbox Ambassador says:
  Location of Ambassador of the community...
  The Xbox Ambassador says:
  Your question will be answered by an Ambassador of the Xbox. You have been connected to the Ambassador as a user Xbox [3]
  The Xbox Ambassador says:
  Hello
  Terry wrote:
  Hello
  The Xbox Ambassador says:
  Hey
  Terry wrote:
  just to be on the phone to xbox live support and was told to come here
  The Xbox Ambassador says:
  ok\
  The Xbox Ambassador says:
  What is your problem?
  Terry wrote:
  I bought the 4 for forza ansd 360 new sealed Christmas...
  Terry wrote:
  has got 2 codes that accompanies the game but the pack track code does not work
  The Xbox Ambassador says:
  Wow good
  Terry wrote:
  whenever I put in the code it says code redeemed
  The Xbox Ambassador says:
  I think the code is used. You must return to the retailer
  Terry wrote:
  I tried to, but since I already opened the case they will not accept
  The Xbox Ambassador says:
  Oh. No,
  Terry wrote:
  the code had been used or defective as I am the only person who has touched the game once opened, tried to enter the code when it is open
  The Xbox Ambassador says:
  Maybe it was auto bought?
  Terry wrote:
  so, how do I get another code generated track Pack if defective?
  The Xbox Ambassador says:
  I do not know.
  Terry wrote:
  bought the game new, so I get the track pack
  The Xbox Ambassador says:
  Oh. It's bad.
  The Xbox Ambassador says:
  I think that if you Exchange 1 code it will buy it
  Terry wrote:
  car pack code worked, starter pack did not work
  The Xbox Ambassador says:
  Oh.
  The Xbox Ambassador says:
  It's a bad
  The Xbox Ambassador says:
  BTW you have an evolution of the tests?
  Terry wrote:
  Yes, I want to? but more anxious to get a code object generated for this pack
  The Xbox Ambassador says:
  Hey if I help can u give me this game too?
  Terry wrote:
  ?????????????????
  Terry wrote:
  So is it possible to get a code for that time?
  The Xbox Ambassador says:
  Hey
  The Xbox Ambassador says:
  Yes.
  The Xbox Ambassador says:
  you need to contact them
  The Xbox Ambassador says:
  and tell them that the code is used.
  Terry wrote:
  I was told to come here? where can I go to get the code?

  Hi Terryg76,

  ·         What version of the operating system is installed on the computer?

  I suggest you to contact the game manufacturer for more help and information.

• Need help with the blue screen issue "NAVEXI5. SYS, PAGE_FAULT_IN_NONPAGED_AREA ".

  Original title: need help with the blue screen issue
  My computer turns saying a blue screen: a problem has been detected and windows were shut down to prevent damage. The problem seems to be caused by the following file: NAVEXI5. SYS PAGE_FAULT_IN_NONPAGED_AREA he seems to have a different error whenever he turns to a blue screen. Can someone help me please.

  Hello
  

  1. Since when are you facing this problem?
  2. you remember to make changes to the system?
  3. do you get an error with this error code?

  I suggest to unplug external devices such as printer, scanner, etc. that are plugged into the system, and then restart the system and check if the problem persists.

  Method 1.
  I suggest you to do a check disk from the recovery console and check if the problem is resolved. Follow the steps mentioned below.
  a. start into the recovery console using the XP CD. Follow the steps mentioned in the article below.
  Description of the Windows XP Recovery Console for advanced users
  http://support.Microsoft.com/kb/314058
  b. perform a disk check.
  How to perform disk error checking in Windows XP
  http://support.Microsoft.com/kb/315265

  Method 2.
  I suggest you to start with the XP CD and then do a system restore. Follow the steps mentioned in the article below.
  How do I recover from a corrupted registry that prevents Windows XP startup
  http://support.Microsoft.com/kb/307545

  I hope this helps.

• Need help with the IP configuration on vm ware for the installation of 11 GR 2 on linux vmware 6 on win7

  Need help with the ip configuration on/etc/hosts for the installation of 11 GR 2 on linux vmware 6 on win7.

  Let me know if you need more info... in fact I have a setting error while installation said

  -(/ etc/hosts has no correct entry for the host name)

  Host: 192.168.85.100

  Win7 ip: 192.168.1.x

  Thank you...

  (host computer)

  Win7 64 bit

  (vmware)

  Oracle Linux Server 6.3 version

  Release of Red Hat Enterprise Linux Server 6.3 (Santiago)

  Oracle Linux Server 6.3 version

  -(/ etc/hosts has no correct entry for the host name)

  Then post your/etc/hosts.

  Host: 192.168.85.100

  Win7 ip: 192.168.1.x

  Why 85? have you tried 192.168.1.100?

• I'm on Acrobat 10 and I need help with the distribution of shape feature. Is there a way to change the registration e-mail download addressed to the? Currently all forms I create and then distribute may only be subjected to my email account... I appreciat

  I'm on Acrobat 10 for mac and I need help with the distribution of shape feature. Is there a way to change the registration e-mail download addressed to the? Currently all forms I create and then distribute may only be subjected to my email account... I appreciate any help!

  Do not use the feature distribute the form. Instead of this, just put up a button "submit" and configure it to send email using any email address you want. Just add a button and set the action of the mouse upward on "Submit a form" and use a type mailto URL and specify that you want to send the full PDF. Then activate the reader of the document: where "Advanced/extended features in Adobe Reader" is located in Acrobat XI?

  If you really want to use distribute the form for some reason, change the e-mail address in your preferences: Edit > Preferences > identity > Email address

• Hello need help with the opacity mask.

  Hello need help with the opacity mask. I hope someone out there can help

  I inherited a logo that appears to use a Logo of OM has a shape with a grad. This grad at first sight is not used in the Grad scheme and there is not editable.  Looking at the transparency palette I find an OM (pic1) output option. If I choose what the grad on separates it from the page of the form, that is from there I can change/remove as required (Note2).

  However, sometimes (he did no change), I'll be back to the same original form and output option is grayed out and is no longer available. Or I go to the similar shape that has the same treatment and I can't go out OM (pic3)

  The only difference is the thumbnail in the transparency palette, which is strong in pic1 and rated on pic3. What Miss me?    I'm not clear what the advantage is simply OM using the Grad palette to apply a grad in my form, but until I can get rid of OM who is there, I can't comfortably apply to the grad I want.

  The white gradient LHS I have no problem with. I choose fortunately only and each time get the possibility of release of OM.
  

  

  The other thing weird. When I select the white gradient. Sometimes, the exit option is in the palette without going through the drop-down list (Fig 4).

  Other times seems not that OM has already been applied, because the palette gives me the ability to mask rather than liberation (5 photos). Until I go to the drop down and then I find Release is an option after all.

  What is the difference here?   Not much of a problem, because either way I can release OM to be able to change the grad.

  The file is passed through several hands and play anywhere to try to resolve issues, and many stops and save slot, so something along the line was of course done a logo and not the other because of the difference, but I can't for the life of me see what that.

  

  I hope someone can help. Very appreciated

  
  

  See you soon

  Dave

  Dave,

  I've (mis) understanding the issues, you can account for the box to the right in the main palette transparency (called thumbnail) here.

  Illustrator help | Transparency and blending modes

  represents the masking objects.

  Some of your screenshots show no object mask, so it only is not really a mask even if do the opacity mask has been clicked and there seems to be one in the layers palette, wherever you look.

  I think that it is perhaps the issue.

• need help with the mac version of PES

  need help with the mac version of PES

  If you follow the 7 steps you can dl a trial via the links here: http://prodesigntools.com/tag/ddl

  and activate it with your serial number.

  If you have a problem dl'g, you don't follow all 7 steps.  the most common mistake is not meticulously follow the steps 1, 2, and/or 3 (which adds a cookie to your system, allowing you to download the correct version of the adobe.com site).

  p.s. If you need a more direct link, you must specify the exact version you want.

• Making the ear of corn and need help with the ball.

  I do some corn on the COB for an illustration and I need help with the texture of the ball. I've been slowly making progress with gradient for kernels mesh, but I can't seem to recreate the look of the ball at all. I tried to recreate it in a rectangle by using the option in the menu object (1 row, 50 columns) gradient mesh and I'm trying with the fusion in object mode, but not lucky yet. Can someone help to put me on the right track to make the texture:

  

  

  

  I've been slowly making progress with gradient for kernels mesh, but I can't seem to recreate the look of the ball at all.

  Tank,

  You have published three images stylistically very different. The first is photographic and call probably (but not necessarily) for graduates of mesh. The other two are graphical treatments (and frankly, they're both rather flat; lack of depth).

  Illustration style extends the range of cartoonish in sketchy photo-realism and all the rest. The problem is you didn't show your own attempt so that anyone can have an idea of what you're trying to achieve the stylistic point of view.

  I just need to put in place so that the final step does not appear the whole box. The problem now is trying to make the style of the good brush to reproduce the effect...

  You seem to think you have to build a kind of linear construction and then find a way to reshape the shape of each part of the leaf. Yes, you pouvez approach it this way, but Illustrator users has often tend to be what aunt Molly would call "too clever by half."

  Not everything must be something semi intelligent auto or complex and tedious consruct involving brushes, envelopes, masks, etc, etc. Much can be accomplished by thinking that he just thanks to measure you draw directly economic paths and constructions, which take no more time (often less) and result in very tidy, simple files. Again, a lot depends on what you are trying to achieve the stylistic point of view. But here's an example that only took a few minutes to draw:

  

  

  

  

  

  If the above consists of:

  Three roads closed, 8 points each, with ordinary linear degrees

  Three mixtures of open path with three anchor points for each key path

  Six paths closed for shadows / highlights, with 19 points in total

  Mixtures being directly from the paths drawn comic forms, the spacing of the veins 'automatically' and intuitively follows the width from point of view of the worksheet.

  Rather than to build a boilerplate brush, colouring and the weight of each of the three main paths of the vein mixtures can be set individually at any time, simply directly by selecting the key path.

  JET