need help with video editing in Movie Maker

Similar Questions

• I need help with codecs and Wiindows Movie Maker!

  The hard drive of my computer broke and I had to take it to the shop. They managed to save my unfinished videos in Windows Movie Maker, but when I try to upload to Windows Movie Maker it says that it cannot. I was wondering if anyone knew what it meant, or if I can do something else to finish the video.

  Apparently you do not see the app in the file but
  It must be a project .mswmm file if it starts Movie Maker.

  If Movie Maker will not open the file it is likely
  corrupted. Not only that, but if the technology service reinstalled
  Windows... your source for project Movie Maker files (pictures,
  video clips, music files) are probably also missing.

  To display the file format (extension) of your files...
  Reach... Control Panel / folder Options / View tab.
  ... To check "Show the hidden files and folders" / apply / OK.

  Have you tried to create a new project just to make sure that the
  Movie Maker still works?

• Need help with video scrolling

  Hello

  I need help with a project. Subsequently, I want is that a webcam controls the position of the mouse and the mouse position

  control of a video. But I would like the part where the mouse position controls the video.

  So, if the mouse is on the left on your screen, the video will be on the first image and when you move, you're the mouse for

  the right to the video play as a result traffic. and stop when the mouse is completely right.

  Effectivly the scrolles from the mouse through the video. It must be on the x-axis.

  I'm not that formilliar with flash, so any help would be great

  THX!

  Thijs

  what you need to do, is to designate a rectangle where users can use their mouse to scroll through the video.  If this rectangle has instance name bar, you can use:

  var m, b:Number;

  var lastSeek:int = getTimer();

  flv_pb.addEventListener (MetadataEvent.METADATA_RECEIVED, f);

  bar.addEventListener (MouseEvent.MOUSE_MOVE, moveF);

  function f(e:MetadataEvent):void {}

  paramF (0,0,stage.stageWidth,e.info.duration);

  }

  function moveF(e:MouseEvent):void {}

  {if (getTimer () - lastSeek > 1000)}

  flv_pb. Seek(m*e.stageX+b);

  lastSeek = getTimer();

  flv_pb. Play();

  }

  }

  function paramF(x1:Number,y1:Number,x2:Number,y2:Number):void {}

  m = (y2 - y1) / (x 1 - x 2);

  b = y1 - m * x 1;

  }

• Need help with photo editing

  Hello! So, I'm new here and this is my first post. (BTW, I CS6 and spin 10 Pro Windows)

  I have some photos that I need PhotoShop/edit. I take photos which are usually resolution 760 x 1024 and what makes them in 16:9 aspect ratio pictures without stretching it. What I use is Microsoft paint and cut the whole photo, stretching of the canvas up to 1920 x 1080 (16:9 ratio), paste the cut image where I want in the photo, then I select anywhere from 15 to 200 pixels (depending on the photo) of the side and stretch it across the empty space to fill it so the sides are not empty. Having a sense what I do? It has some drawbacks for me however, 1. When upscaling (to facilitate the 16:9) 1920 x 1080 my photos in bulk a few details and objects are a little wavy at the edges should be smooth. 2. when extending over the sides, it tends to not be able to choose the top and low 1 or 2 pixels so I must fill this space using the tools I have. 3. it is extremely laborious when you make several photos and faster I can do best. 4. it is Microsoft paint, sucks compared to PhotoShop, lol, duh. So I need some help with what I've done (the process I explained) makes faster and better.  I Photoshop CS6 (version student and yes I am a student), I have not used but... why the hell not? Well I installed on my PC a year or two before and then had problems of PC so I did a fresh install of Windows and reinstalled never, I thought I was going to need, but don't have, which is why I've never used it. Now, I do some photo editing and thought why not use PhotoShop? I did nothing as deactivate the license on my PC before reinstalling my Windows, whatever? I'm going to do a fresh install of windows on my desktop (first time in two years) on a new 512 GB Samsung SSD Pro 850 and I'm waiting for the SSD happen, so I was thought for now I would just use it on my laptop (1 TB EVO 850), but the license allows multiple PC even if I was the only one to use it? Is also easy/fast to learn PhotoShop? All I have to do is a photo of basic editing. Hope that everything I said is logical.

  Thank you!

  BTW, having an SSD really help a lot with PhotoShop?

  Hello

  Yes, you can install Photoshop CS6 on two machines.

  You had it previously on the same machine and I think you would have to reinstall it on the even later, so that would not cause any problems.

  Here is the download link for Photoshop CS6:

  Download Creative Suite 6 applications

  You can do all of these steps to resize an image in Photoshop without going into the paint.

  In Photoshop, open you picture and go to Image > size to resize and choose the desired image dimensions

  Here's the article for the same thing:

  Resizing of images

  Kind regards

  Claes

• Need help with bookmarks edition ASAP

  I converted to a document Microsoft word to PDF with bookmarks but some between data is also coming in the form of bookmarks .i have tried everything to remove them but there is no way. also, some between the lines become parent bookmark. need help as soon as POSSIBLE.

  like suppose SHELL RIB is the title and is supposed to be a bookmark but it data into shell sides as its purpose, the entrance and etc. are a parent bookmark and its impossible to remove.

  very imp to solve this problem... need help URGENT...:)

  Player can also create PDF files. If you have the drive and you create a PDF from Word you use an internal function of the word, which has nothing to do with Adobe or player. You should post your question on a forum of Word, in this case.

• I need assistance with video editing and post production building

  Hello

  I decided after a long time to invest in a PC for me to use the video publishing house (at work, I have dual Xeon based build). After a long search I opted for this configuration and I am interested in your opinion and maybe a few suggestions for improvement. I chose X 99 platform for future compatibility upgrade and the CPU I chose now, I can replace later down the road if/when Intel realeases the 10 new core CPU i7 LGA2011-3. So I didn't want to spend more money on the K 5930 or 5960 X at this time, and I feel the 5820K with a stable overclock will give me the results I want for now, as I edit 1080 p videos for now.

  I turn mainly on SONY PMW - EX1 and NIKON D800, with sometimes images of k 4 from DRONES. I use PP to publishing, AE for the post production and motion graphics, SOUL of renders, Lightroom and PS for RAW photo editing.

  Case: Fractal Design R5 Blackout edition

  PSU: CORSAIR 750W 80 + modular Platinum HX750i (I hope that it will be enough even with overclocking)
  

  MB: ASUS X 99 PRO / USB 3.1

  CPU: INTEL Core i7 5820 K 3.3 GHz 15 MB BOX LGA2011-3

  CPU cooler: NOCTUA NH-D15S

  RAM: CORSAIR Vengeance LPX CMK32GX4M4A2666C16 32 GB (4 sticks of leave options to upgrade to 64 and take advantage of the quad channel)

  GPU: ASUS STRIX-GTX970-DC2OC-4GD5 4 GB PCIe (is it useful to the 980 for these given additional CUDA cores it is $ 200 more?)

  SSD1: Cache files SAMSUNG 850 series 250 GB 25/S600 EVO - OS, PROGRAMS and PP

  SSD2: SAMSUNG 950 PRO 512 GB SSD PCIe 3.0x4 m2 - MEDIA PROJECT, FILES PREVIEW and OUTPUT of RENDERING

  HDD1: WD WD40EFRX 4 TB 64 M/S600 Red Edition -j' I may be obtained with two drives in RAID1 to memorize everything, after I'm done with the project and copy everything SSD2 to HDD1, but for now, I'm going with a single, and modernize if more space and backup is necessary.

  I intend running 64-bit PRO 10 Windows.

  Let me know what you think and suggestions and opinions are welcome.

  THX

  good deal and CPU cooler, x 10 core i7-6950 is widespread about 6 months out and compatible with x 99. You wouldn't have to upgrade right then, but every time you felt the need.

  If you are looking for max overclock stable and expansion as a new video card, a quality 1 k watt will be a better option. for a little more, the SuperNOVA 1300 G2 evga and XFX P1-1250-BEFX are on sale at a discount, if you don't mind discounts. the hx850i corsair is also a little more with his rebate, the hx1000i jumps a bit with no refund.

  GPU - core count, the gtx 980 would be worth $400 vs gtx 970 price. the 980 gtx has more than just a difference of base number, but it still makes the $500 + unattractive price tag. If you think you need more power now, take a look at the gtx 980ti. If not, go with the gtx 970 and if / when you do not need an update, add another to the creation or upgrade to pascal or later, when nvidia releases.

  If possible, I would avoid mirror or any what raid for backup. RAID (same mirror) can add an additional point of readers isolated data and data corruption or failure. three separate copies is good for critical data, two if not so important. using a Cloud Computing service may be a good option for one backup copies.

• Need help with video off a XPS 435 t card

  I am trying to replace my video card in my XPS 435 t but for the life of me can not find a way out of my case.

  There is a big black on the top of the video card to connect on a support type plastic black plastic on the front of the case and I can't understand how to unlock it.

  Here is a picture...

  

  Any help that anyone can provide would be much appreciated!

  Hi John,.

  Please see the below pictures to remove the graphics card:

  1 locate the great video card.

  

  2. lift the expansion card retention.

  

  3. press the tabs on the bracket to support PCI and push holder at the back of the computer until it clicks into the slots at the back of the computer.

  

  4. Locate the screws on the video card.

  

  5. remove the screw that is blocking the video card.

  

  6.

  Unplug the power cable from the video card.

  

  7.

  Press the release lever while lifting the free version of the connector.

  

  8.

  Pull up at the end of the video card based on the fan to release.

  

  9 remove the video card from the chassis.

  

  Please check and answer if this helps.

• Need help with video problems

  Hello world

  I'm new to this forum. I have a car voiceblog. How to add videos in blog post.

  Looking for your kind help.

  AsimSaeed

  This is a WordPress site. Use a WP plugin.

  http://WordPress.org/plugins/VideoJS-HTML5-video-player-for-WordPress/

  A Google search will reveal countless other WP plugins.

  Nancy O.

• Need help with video "vignette" Locket

  Help me decide if it of feasible or "worth" in regard to ease, it would be. I have an image of sleeping dog head. I want to put a video of the 'dream' is to have the dog in the dog park as a soft oval sharp as a video insert on the dog's head. I am a beginner and training and to see that an image can be cropped to leave a smaller image that can be imposed on another full image frame. The question is how to get the image in a thumbnail that 'floats' above the background image.

  Is this possible? Built-in effect? - or difficult to do?

  TIA,

  Ken

  Lots of ways to do that including a mast and vignette in Photshop.

  But using an oval track matte effect / elipse you create in the Titler first is a way to explore.

  Read how caches work.

  Read how to create title (circle / oval.. .what ever) and how to fill it.

  A blur may help as well.

  Blend modes can be pleasant to use.

• Need help with video in Flex Mobile

  Hello

  I searched a bit for more information on this and really found anything useful for my problem. So far, I have converted the actionscript code that is posted here: http://www.adobe.com/devnet/flash/articles/osmf-media-player.html

  work within my project mobile ios. The problem is that no matter what I tried, I can hear the video, but not see. Codes uses the OSMF framework, which uses StageVideo I think, so I tried affecting background request 0 alpha that was posted on; still no video but. The project is also set to use direct rendering. I even tried a few bones bare AS code to implement the StageVideo, like others have posted here, but still the same thing. If anyone show me an example of work or provide suggestions on what I might hurt?

  Thank you

  Hello

  Thanks for these links. I understand the problem finally. The src code posted in the devnet article was using a mask around the video that never fit, and so that's what was hiding the video all along. I have yet to adapt this code to use button controls, but I think I'm headed in the right direction now.

  Rgds

• I need help for videos in Movie Maker. How can I import them from my USB?

  Whenever I put a video in Windows Movie Maker, I click on the folder that contains all of my videos and it says that there is no items match my search. The photos appear good, but the videos don't. So I tried to plug in my flash drive, which also has my videos on it, and which simply says that there is no items match my search. What to do...

  Whenever I put a video in Windows Movie Maker, I click on the folder that contains all of my videos and it says that there is no items match my search. The photos appear good, but the videos don't. So I tried to plug in my flash drive, which also has my videos on it, and which simply says that there is no items match my search. What to do...

  ==================================
  What is the format of the video files?

  Several formats are apparently compatible with
  Movie Maker, but the most reliable choices are:

  Photos - bmp
  Video - wmv or dv - avi
  Music - wmv, wma, wav

  Here is a link to a free converter that can be
  worth a try:

  Format Factory
  http://www.pcfreetime.com/
  John Inzer - MS - MVP - digital media experience

• I need help with my Windows Media Center. I was not able to get any video on my Windows Media Center.

  original title: I need help with my Windows Media Center.

  I was not able to get any video on my Windows Media Center. How do I do that? I can put it on Facebook, but cannot get them on the Media Center. I'm ready to pull my hair out LOL

  Hello

  1. what exactly happens when you try to play any video on media center to Windows? Error message? If so, then post back the exact error message.
  2. were you able to play videos on Windows media center with no problems before?
  3. don't you make changes on the computer before this problem?
  4. are you able to play the videos on Windows media player?
  5 are supported by Windows media centerfiles?

  Answer to the above mentioned questions could help us help you better.

  The following article might be useful.
  Solve problems with DVDs and movies in Windows Media Center
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-DVDs-and-movies-in-Windows-Media-Center

• Please help try to copy the video in windows movie maker to burn to dvd

  First of all Hello, this is my first but I have read a lot of posts and tried to figure it out, but think I made things worse, I have a dell inspiron 15 something and a panasonic HDC-HS20, I had to reinstall windows and all pilots who, I think I did as when I put my camcorder software I began to have problems He says not to approve a 64-bit program and then it worked for a while then kept computer crashing then a black screen at start up and finally when I tried to burn videos to dvd, it says that I don't have a dvd player/burner, so I will now try to transfer my videos through Director of windows I downloaded everything it says that I need and it transfer files, but when I add them to movie maker it shoes a yellow triangle with a black exclamation point in each sinus and when I press on the bar moves along to play, but no images so im assuming that he does not, is it possible to do what I do, or I need to reinstall my software of camcorder and just hope that it recognizes my drive? any help would be appreciated.

  Thank you

  Sorry, I can't say I have now added my software that came with the camcorder, the software is called HD writer AE 1.0 and checked the compatibility of my product with microsoft and it says it's ok with a 64-bit, recharged even when software and when I click to create media that he says again in writing destination @cannot find accessible driver , so I looked through articles where dvd burner is not recognized by other programs, but he told me to go in accessories of control, performance etc. and do a right-click on the HKEY CURRENT user but it says nothing about the registry keys, it is said by default with a symbol beside him ab and under said data not defined

  Thank you

  =================================================
  The following Panasonic sheet for your camera model # HDC - HS20 States
  He records on SD/SDHC cards to the MPEG-4 AVC/h.264 format.

  Panasonic HDC-HS20
  http://Panasonic.NET/AVC/camcorder/HD/global/products/hdc-HS20/specifications.html

  Then... because Movie Maker is not compatible with this format... the best bet would be
  be to copy video content in a folder on your hard drive, convert it to a
  format Movie Maker is compatible with as WMV, then you can import into
  Movie Maker.

  The following links are not * the * solution... but can help to start.

  Movie Maker - import AVCHD files
  http://www.Papajohn.org/mm2-importing-video-AVCHD.html

  New camera with AVCHD not recognized by MovieMaker
  http://www.windowsmoviemakers.NET/forums/ShowPost.aspx?PostID=231160

  Movie Makers Forums
  http://www.windowsmoviemakers.NET/forums/default.aspx

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• I still need help with a thumbnail view in video files Real Player XP sp 3

  I still need help with thumbnail view in video files Real Player XP sp 3-Help! Help! Help!

  You will need to contact the support of Real Player, since the problem occurred with their program.

• Need help with coding for HTML5 with emergency Flash video

  Hello, need help with my coding in Dreamweaver CS5.5 for HTML5 with emergency Flash video. Not sure if the coding is correct. Do I need any other JavaScript etc.?

  

  Another thing is that you don't have to include SWF as aid manual if you provide all 3 ogv, webm & mp4 video formats as one of these formats will certainly be played in any browser that is fully compatible HTML5.

  Still one thing you could do if you don't mind hosting your video on Youtube is to get an embed code for Youtube - in this way, you don't have to convert all the files. YouTube will do it for you and it will play on devices of HTML5 as well as supports Flash player of relief for devices that cannot play HTML5.