I need assistance with video editing and post production building

Similar Questions

• I need assistance with combine jpeg and raw photo even after import [was: Hello?]

  I need assistance with combine jpeg and raw photo even after importation

  You mean both JPG and RAW file after importing from a camera memory card? There is a setting in LR preferences to process the JPG images next to RAW files as separate photos. It is under the general tab of preferences. By default, this option is not checked.

  If this is not your problem, then we will need Lots and Lots and lots more information about what you mean by the combine

• need help with video editing in Movie Maker

  I'm editing video on Windows Movie Maker and you want to cover a bite with a b-roll. Y at - it something to do this, and can it be done? I have not found a way to go beyond covering both the video and audio.

  Not sure what you mean when you say b-roll...

  Do you want the audio to continue while you add different content to the video track?

  If_yes_you can drag a second instance of the video Clip on the audio / music
  and then divide the video track if your can add video, pictures, clips etc. Of course
  If you add 5 seconds the new hardware... you will have to remove 5 seconds of original.

  The following tutorial was written for WIn XP, Movie Maker, but it can offer a few ideas:

  ===================================================

  For the timeline, drag a second copy of the video to Audio / Music
  follow and drag it left or right to align on the Audio track.

  Then right-click / mute the Audio track.

  Now, you can split the video anywhere you want... CTRL + L... and delete
  a section... then insert a Photo and give it the same length as the
  segment you removed.

  Here's another method:

  Split your video clip on each side of the area where will be the stills.

  Now... drag the part cut on the audio / music. BTW... If you want to
  to add a second 5 again... Remove 5 seconds of the video clip. (info below
  splitting if you need it)

  Drag your fixed shots to the timeline and drop it off at the place where
  you have deleted the video.

  The Audio clip on the audio / music can be dragged to the right or left to
  adjust its position.

  More information about the Division...

  "Split a Clip in MM2.1.

  Drag the audio clip on the timeline.

  Play the video/audio by clicking on the 'Play' button under the display screen.

  You will see the playback indicator (vertical line), advancing through the
  timeline.

  Click on the "Pause" button at the location where you want to cut and type...
  CTRL + L or click the "Split" button at the bottom of the display screen.
  (you can also make adjustments by dragging the playback indicator)

  Make splits as much as you want and remove unwanted in law clips
  Click on / delete.

  The following forum might be also worth a visit:

  Movie Makers Forums
  http://www.windowsmoviemakers.NET/forums/default.aspx

• I need assistance with LabVIEW RT and dll

  Hello!

  I'm new to LabVIEW but I am facing something very difficult.

  I develop with LabVIEW 2012 on a cRIO-9082, and I would use a specific DLL in a VI. The DLL is called TcAdsDll.dll and it is used to communicate with a PLC. (This DLL is provided by Beckhoff, for more information: http://infosys.beckhoff.com/index_en.htm TwinCAT > TwinCAT system > TwinCAT connectivity > TwinCAT ADS).

  When I use the 'library of the call' function with the DLL, I get an error 7. I'm just trying to call a simple function of the DLL.

  I know that in LabVIEW RT (Pharlab) only certain DLLs are supported. I also checked the DLL with the tool of NEITHER, but after the 10th dependend DLL calling it just hangs.

  If someone is able to provide assistance, I would be very grateful!

  Does anyone know, what are the rules for the dll must be met to use in LabVIEW RT?

  Thanks in advance!

  A DLL must call only Win32 API supported by the Pharlap ETS system in question in the first place. Since NO guard updated the ETS with almost every new version of LabVIEW it depends actually. DLL checking tool is the only way I know to check this. If this DLL checking failures, or as in your case tool breaks down, the DLL is not justifiable on the RT system. The Beckhoff ADS DLL is a complex beast with many dependencies on any other DLLs Beckhoff and what else, and as such a bad candidate to run on NI RT systems.

  In addition to this fundamental questions, you have additional problems with the Microsoft c runtime library in his infinite wisdom, has decided to create a new C runtime library version with each new version of Visual C. It is already a problem for a developer when deploying to standard PC Windows, but gets a problem almost unmanagabel when targeting something as Pharlap ETS. NEITHER seems to have paid the MS C runtime for their version of the toolchain Visual C of choice for LabVIEW RT system, but this isn't an option for you. If the 3rd party DLL to be used has been compiled in a version of Visual different C that ANYTHING used for the RT version you want to use, then you almost certainly run into trouble, unless the DLL was created with Visual C 6.0 (now a very old version)!

  I've created in the past as a VI based entirely the LabVIEW ADS communication library. It is a tedious job to know the actual byte stream protocol. Unfortunately it is not something that I can share with the community.

  Your best bet would probably be to use the cRIO Ethercat solution and go with an Ethercat on your PLC interface. EtherCAT is sort of a superset of the ADS interface.

  Maybe you can also talk with these guys here. They have a few ADS LabVIEW library and Ethercat libraries too. Not sure if they are basic DLLS and if they would be compatible with LabVIEW RT well.

• I could not find download Windows Mobile Device Center 6.1 so I can download pic & videos from my phone to my computer. I need assistance with their phone is off and on computer any ideas please help.

  I could not find download Windows Mobile Device Center 6.1 so I can download pic & videos from my phone to my computer. I need assistance with their phone is off and on computer any ideas please help.

  See http://support.microsoft.com/kb/931937

• What applications I need for video editing and be able to add titles

  I want to buy Photoshop but want the cheaper option to be able to do video editing and titles.

  You want to Premiere Elements, Photoshop or Photoshop Elements.

• What would be the best video editing and photo editing software to use for an iMac for advanced users?

  My first exposure to video and photo editing is on a PC with Adobe Premier and Adobe Photoshop.  I own a Macbook Air and have used iMovie and iPhoto.  It took me a few years to sort and organize thousands of photos archived and videos.  Now, with the changes in Final Cut Pro and the loss of the opening, I am, even once, sitting on the fence.  Compatibility between the software has always been a controversial issue and that you accumulate more and more files, it would be nice if Apple should keep in mind to develop software that can be upgraded seamlessly without losing or change any data.  For example, the photo is correct, once you become familiar with it. However, personally, I like the way events were created in iPhoto, but also how you can scrub through each event, just sweep a finger of each event.  Now in the Photos, you need to scroll right rows and rows of pictures, which seems to be a step backward when it comes down to the speed and convenience. I finally have the time to go back to my hobby of video editing and I was about to buy an iMac or a Macbook Pro.  What is the best choice for video and photo editing, or should I be looking back to Adobe?

  You can go to Phase One's Capture One.

• 2016 budget PC for video editing and animation

  I am building PC mainly for video editing and animation (suit Adobe, Maya, etc.).

  I7 6700 k, z170 pro gaming, 16 GB of RAM Gskill, evo Samsung 256 gb SSD, 2 TB WD Blue, Dell u2515h.

  I'm really confused, choose the budget videocard, CPU cooler and wardrobe.

  Budget: Around $ 1500 (Indian Rs 100000.) Intend to buy this month.

  Note: With good performance, I want dead silent.

  Thanks in advance.

  I have not read any problem of heating with the gtx 1060, only with the reference cooler on the rx 480. the series gtx 1000 added support for 4 k hdr and wcg, if you don't need those then the older gtx cards are always great to use. the 1060 gtx may be 40-50% faster than the gtx 960 and both are rated 120 watts. If your creative work who need a lot of power gpu, the gtx 1060 with a mid to low workload has a better chance to keep fans and be completely silent. I don't know if the model bill recommends is able to turn off the fan, but with a design unique its radiator fan will not be able to run passive as a biggest fan of double or triple design card. If you are more concerned with budget and plan on only using a few gpu accelerated fx and only HD projects, the gtx 750 ti 2 GB or 950 models 2 GB may be powerful enough for your needs. you would have to see what are the prices where you shop, here all the series 900 gtx cards cost too close to the gtx 1060. I don't know when will be released the gtx 1050, but it can help to lower prices on 900 gtx cards. the gtx 1050 can be around or just below the gtx 960 for the performance.

  the corsair website says the 100R will support 150mm height max cpu cooler, so it should be 90 to 120mm air coolers. you will need to check the dimensions of the cpu cooler you are looking for, to make sure it fits. It would also be good to search online if others use the casing and cooler together. cryorig h7 seems to be 145 mm in height, then he could adapt. I don't know the price for coolers here, so you will need to see those that fit your budget and look at reviews for cooling and noise levels to find the best. If you went with a larger case, it would be able to hold a 140mm cooler air and be quieter. coolers liquid AIO got better when they first came out and last usually a few years before the pump breaks down, or he flees. If an air cooler does not, he would need a new fan and would not risk damaging any material. If the case was too thin to allow a good air cooler, then the liquid would be appropriate, but I would choose replace the case first. the corsair 100r site says it will hold only a 120mm cooler liquid. It should be a 240mm or more large cooler liquid for a chance to be quieter than a good air cooler.

• Best imac for the video editing and graphic design and recording of gameplay

  Hey guys I'm looking for the best imac laptop or desktop for video editing and recording of gameplay with capture card so if you are familiar with the desktop imac or laptop please leave commect to the best imac computer

  and care to capture the card to operate at its best

  • OS X 10.9 or later version
  • 2nd generation Intel Core i5 CPU (i5-2xxx or comparable), 2 Ghz or higher, before Turbo Boost
  • 4 GB of total RAM installed (or higher)
  • Built-in USB2.0 port

  I put spec for you guys can work find best computer imac

  Looking for a new or a used computer?

• I need assistance with Outlook Express

  I need assistance with my outlook express. Please

  See www.oehelp.com/OETips.aspx#7 or be more specific, and perhaps we can help you.

  Steve

• I NEED ASSISTANCE WITH MY ETHERNET DRIVER. HOW CAN I GET THIS TO WORK NEW TI?

  Original title: driver ethernet

  I NEED ASSISTANCE WITH MY ETHERNET DRIVER.  HOW CAN I GET THIS TO WORK NEW TI

  Download and install it

  The driver should be available in the manufacture of computers site

  Use the snid on a label on the computer to search with while you're there

  Or if the motherboard came with a disc to load and the reader will be on it.

• I need assistance with deactivation Suite CS6.  My Mac Book has been stolen. Can you help me?

  I need assistance with deactivation Suite CS6.  My Mac Book has been stolen. Can you help me?

  Contact support by web chat or telephone to reset the activations.

  Mylenium

• I need assistance with lightroom 4 - I downloaded the software but I can not access

  I need assistance with lightroom 4 - I downloaded the software but I can't access it. I have windows XP I need to upgrade to windows vista or windows 7? Any help please. Thanks Zara

  Lightroom 4 does not work on Windows XP

  http://www.Adobe.com/products/Photoshop-Lightroom/tech-specs.html

  You will need to upgrade to Windows 7 or Windows 8. Avoid Vista - It's terrible.

• New blackBerry Blackberry Smartphones and need assistance with calendar

  Hi all

  Just got my first BB and could do with some help with my laptop and schedule (do not know if what I want is possible or available, sorry it of not )

  I had my BB for my personal use and want to be able to sync with a calendar on my laptop.  I don't have microsoft outlook, so I was wondering if anyone knew an application or download I can get who will give me a calendar on my laptop that I can sync with my BB.

  Thank you very much

  ABI

  ABI, welcome to the Forums.

  Google Calendar sync is an ideal option.

  http://www.Google.com/mobile/BlackBerry/sync.html

• Need help with photo editing

  Hello! So, I'm new here and this is my first post. (BTW, I CS6 and spin 10 Pro Windows)

  I have some photos that I need PhotoShop/edit. I take photos which are usually resolution 760 x 1024 and what makes them in 16:9 aspect ratio pictures without stretching it. What I use is Microsoft paint and cut the whole photo, stretching of the canvas up to 1920 x 1080 (16:9 ratio), paste the cut image where I want in the photo, then I select anywhere from 15 to 200 pixels (depending on the photo) of the side and stretch it across the empty space to fill it so the sides are not empty. Having a sense what I do? It has some drawbacks for me however, 1. When upscaling (to facilitate the 16:9) 1920 x 1080 my photos in bulk a few details and objects are a little wavy at the edges should be smooth. 2. when extending over the sides, it tends to not be able to choose the top and low 1 or 2 pixels so I must fill this space using the tools I have. 3. it is extremely laborious when you make several photos and faster I can do best. 4. it is Microsoft paint, sucks compared to PhotoShop, lol, duh. So I need some help with what I've done (the process I explained) makes faster and better.  I Photoshop CS6 (version student and yes I am a student), I have not used but... why the hell not? Well I installed on my PC a year or two before and then had problems of PC so I did a fresh install of Windows and reinstalled never, I thought I was going to need, but don't have, which is why I've never used it. Now, I do some photo editing and thought why not use PhotoShop? I did nothing as deactivate the license on my PC before reinstalling my Windows, whatever? I'm going to do a fresh install of windows on my desktop (first time in two years) on a new 512 GB Samsung SSD Pro 850 and I'm waiting for the SSD happen, so I was thought for now I would just use it on my laptop (1 TB EVO 850), but the license allows multiple PC even if I was the only one to use it? Is also easy/fast to learn PhotoShop? All I have to do is a photo of basic editing. Hope that everything I said is logical.

  Thank you!

  BTW, having an SSD really help a lot with PhotoShop?

  Hello

  Yes, you can install Photoshop CS6 on two machines.

  You had it previously on the same machine and I think you would have to reinstall it on the even later, so that would not cause any problems.

  Here is the download link for Photoshop CS6:

  Download Creative Suite 6 applications

  You can do all of these steps to resize an image in Photoshop without going into the paint.

  In Photoshop, open you picture and go to Image > size to resize and choose the desired image dimensions

  Here's the article for the same thing:

  Resizing of images

  Kind regards

  Claes