Need help with what I believe, it's a matter of pathfinder - thank you!

Similar Questions

• I would like to help with what I believe, it is a problem of routing VLANS on a SLM2008 and RVS4000

  Please see attached Word documentfor a full description.  Thank you!

  Hi Michael,

  All those who say the VLANS within the first hour is a person much smarter than me.

  I have to admit with great humility, I think it took me nagging questions for some patients (AR) and weeks and weeks until finally I have a bit of understanding of the functioning of VLAN.

  So don't feel concerned, many people there are in the same "boat" as you.

  But VLAN, when you get the feel for them, are so so helpful.

  I like under 'acceptable frame type' tick 'all '.

  

  The value PVID tells me basically what VLAN not signposted port is underway.

  This means that in the image below, 3 ports, 6-8 will be I hope, expecting to received and transmit frames Ethernet labeled with a tag VLAN 2.

  But on the diagram above, I can now make room for the following table.

  without tag vlan tagged vlan

  3-1-2 switch port

  6 2 2 switch port can not be marked and unidentified on the same switch port

  7 2 2 switch port can not be marked and unidentified on the same switch port

  8-1-2 switch port

  In the diagram above, I can see that 1 and 2 switch ports are ifor untagged VLAN 3 so the packages roll inside the switch for VLAN 3 will have their VLAN TAGs removed from the Ethernet frame as the traver packets on the switch to an IP host.

  I also see that the switch port 3 unidentified in the VLAN 1, but you have set the acceptable frame on tagged only type.

  Unless I read this all in fact wrong.

  Note: I have to admit that has the big brother to the SG200 SG300 series switch,

  Don't forget about PC / security cameras (except Cisco, hey I'm system engineer have to give my equipment fitted with a plug) in most of the cases do not send frames labeled Ethernet in the switch, which is why I like the idea of accepting all types of frames. I guess that the default VLAN settings are the acceptable frame types = all

  When we add a vlan to a switch port, as the image below, switch to these ports are added as a vlan tagged, because the port if already reside in one VLAN not tagged...  This means that in the case below, 3 ports, 6-8 will be I hope, expecting to received and transmit frames ethernet labeled with a tag VLAN 2.

  

  You said it, not easy, you need to play and practice with switching and routing

  .  But the general rule that I follow for VLAN's.

  A switch port can be untagged in a single vlan, but at the same time marked on several VLANs.

  With respect to the limitation of the camera, my camera, I have not used my filters. But there is the possibility of limiting access by IP address or network.

  I guess you can find an article on your DLINK camera to filter. Reset the default camera and try to add it again.

  Routing between VLANS will occur at the RVS4000, it routes packets between different VLANs, the SG200 cannot be put in Layer 3 mode like its big brother the 300 series (SRWXXX-K9-NA)...

  

  Best regards, Dave

• HOW CAN I TALK TO A LIVE HUMAN BEING? I need help with what I bought.

  I just bought something that is supposed to allow me to convert a PDF file online to a word document and I don't know enough about computers to understand what you need to get. Help, please.

  Thank you

  Paul

  Hi Paul,.

  I'd love to help you here. Please visit to get started with ExportPDF | Adobe Community information on the conversion of PDF files to Word format.

  And, if you prefer, you can Contact Customer Care. Simply click on the blue button, still need help at the bottom of the page to find the phone and chat options.

  Best,

  Sara

• Updated software and need help with what to buy

  I am a professional wedding/portrait photographer who uses photoshop cs3 with some additional photography actions in Photoshop.  I have lightroom also but that you not him have not used in years. I think it's lightroom 1. I shoot both first and JPEG. I'm interested in some other photoshop actions that require me to use Lightroom 4 or later or Adobe csmera gross. I also know my photoshop is very old, but it's not my priority to replace. My question is that if I get Lightroom which should buy Lightroom 4 and a higher?  And can I edit raw files in Lightroom 4 or higher, or do I also Adobe camera raw?  In addition, what are the links to purchase programs and are is only a compensation per month thing?  Thank you!!

  Adobe Camera Raw is a plug-in for Photoshop and Photoshop Elements. All the technology that is in the plug in Camera Raw is integrated in the Lightroom program. Lightroom does not use plug in Camera Raw, because he didn't need it. But the technology is precisely the same thing. So I do not know you can say that Camera Raw is better or worse than Lightroom because they use the same technology.

  For buying Lightroom 4 or 5 of Lightroom, you will need to find a dealer that has the version that is available. Adobe sells only Lightroom 6, the last standalone and Lightroom CC 2015, which is the version of the subscription. Programs are basically the same, although Lightroom CC has received some updates of features that are not available in Lightroom 6. The subscription creative cloud is really a good because not only that you get all the features of Lightroom and updates frequently, but you also have the latest version of Photoshop with all the features it offers. Photoshop and Lightroom together make a powerful combination, especially for the professional photographer. And if you're still using Photoshop CS3, I think you would find that there are huge advantages to have the latest version of Photoshop.

• because the old, one crashed, got a new computer. want to download and install my products. need help with what to do

  because the old, one crashed, got a new computer. need help to download and install my products on this new computer

  Download and Installation Help-
  https://helpx.Adobe.com/download-install.html

  Downloads

  http://www.Adobe.com/downloads/other-downloads.html

  Find the serial number of your Adobe product quickly

• I need help with what to buy

  I want to buy first pro as well as photoshop cc but is there some type of package or something that I was watching the first pro packages and the other said that he understood the photoshop application does that mean I get both in this package

  so does that mean that to get full versions of pro and photoshop first and what I pay is 20.00 per month

  First Pro + Photoshop would be 19.99 $ + $19.99 + taxes [$19.99 for a single application]

  it cost anything to download or is it like a cell phone where you pay each month and if you do not pay a month that disconnect you the service here but you are still owner im sorry im new to this type of things

  There is no additional cost to download the apps and you're right about the last part [he works like a mobile phone]

  Thank you

  Regalo

• Need help with what to buy

  Hello

  I am a student in a college and we have Adobe Premiere Pro there and I recently downloaded and started the free trial, so I can edit my own at home.

  I know that we have another video entry of great project and I am currently working on one now.

  The question is, I'm new on this. What should I buy, or what type of membership that I should buy and offer discounts to students? Classes are only until May and I'm not sure that I will need it for next semester.

  I appreciate any help!

  many nle and other programs have a student edition or a discount. If you need to use the Adobe for your class, etc., can watch their student membership.

  Student software discounts, eligibility student | Adobe

• How can I get ahold of a LIVE person? I need HELP with my email account (Email removed for privacy), you can contact me at Email removed for privacy or * withdrawn * please someone HELP! Mike Golab

  How can I get ahold of a LIVE person? I need HELP with my email account (* address email is removed from the privacy *) you can contact me to the * address email is removed from the privacy * or * remove * please someone HELP! Mike Golab

  E-mail address is removed from the privacy *.

  No, and that has nothing to do with this old thread. This is a scam that last for years. Microsoft never does unsolicited phone calls.
   
   
   
  Is calling, Microsoft, a scam?
  http://answers.Microsoft.com/en-us/protect/wiki/protect_other-protect_scanning/is-that-call-from-Microsoft-a-scam/6718e389-8a00-4E4B-ACA1-d07298ea4c19
   
  
  Report the scam
  http://support.Microsoft.com/reportascam
   
  
  Scams by e-mail or web: how to protect yourself
  http://www.Microsoft.com/security/online-privacy/phishing-scams.aspx
   
  
  It's a real call from Microsoft?
  http://www.ComputerActive.co.UK/CA/PC-help/2134917/genuine-Microsoft 
   
  
  Avoid scams to phone for tech support
  http://www.Microsoft.com/en-GB/security/online-privacy/avoid-phone-scams.aspx
   
  
  Do not fall for phony phone technical support
  http://blogs.msdn.com/b/securitytipstalk/archive/2010/03/09/Don-t-fall-for-phony-phone-tech-support.aspx
   
  
  Aggressive, persistent Windows tech support fraudsters continue to track consumers
  http://www.Computerworld.com/s/article/9248122/Aggressive_persistent_Windows_tech_support_scammers_continue_to_stalk_consumers
   
  
  What is a certified Microsoft [or] partner?
  http://securitygarden.blogspot.com/2011/09/Microsoft-removes-Gold-Certified.html
   
  
  And see this post by bhringer
  http://answers.Microsoft.com/en-us/protect/Forum/MSE-protect_scanning/recieved-eventvwr-cold-call/0f82d183-2046-469F-A2D2-8f9fa291f082#LastReply

• Need help with image fusion

  Hello

  Before I get to my question, I want to give you a glimpse of the project I'm working on and the aspects that I need help. For a school project, a customer, 94Fifty asked us to create an advertisement that depicts their basketball and could be used in advertising online and in magazines. The 94Fifty of basketball is the world's first "smart ball." It can count how many times you dribbling, the arc of your shot, release time it takes for you shoot, etc. To use the ball, you need an Apple product that can download the application 94Fifty on the App Store, so that this project is done as a collaboration with the company 94Fifty and Apple.

  For my ad, to really capture the idea of being the first smart ball, 94Fifty ball I wanted to mix an image of the texture of the ball of 94Fifty, with the shape and details of a brain, with the slogan being, "A ball that is as smart as you." I have my design buried on, but I'm not sure how to combine the image of the brain with ball should I use layers? How can I remove the pink color of the brain and replace it with the ball while keeping the shape of the brain and the lines creased the brain? Any help and technical that you can give would be greatly appreciated.

  Here are two pictures that I'm trying to mix.

  

  I would also try and keep the logo of 94Fifty which is on the ball in the mixed picture.

  Please do not confuse this for to ask me someone to do it for me, it's the exact opposite of what I want, I just need help with what to do.

  Here is a fairly simple method:

  First of all, level of basketball for the type to be horizontal. (Also correct the values of white light - burn at the top left and bottom top right.)

  Mask on white background of the brain and turn the image to 0% of saturation.

  Put the brain on basketball on its own layer. Make the overlay blend mode.

  Using free transform, reshape the brain is greater (rounder), like the basketball, with a visible margin around the edge of the ball.

  -Now, you have a brain in a basketball, but the brain is a bit too subtle.

  Duplicate the layer of brain as many times as you need to get the good contrast (I've duped the layer of brain three times, for a total of four layers of brain).

  You will probably find that you need to use the levels adjustment layers or curves on each layer of the brain, for finer value adjustments. Make sure that each adjustment layer affects only the layer directly below.

  

• Need help with a simple basketball game.

  Hi im new here and I need help with what makes this simple basketball game.

  Im trying to recreate this this video game. I'm not sure if it uses as2 or as3
  

  If someone could help me make a game like this or point me to a link on how to do it would be greatly appreciated.

  AS2 is used in the video.  If you have other issues, please post in the forum AS1/AS2.

• No support for pse4, don't need help with aid and all the rest. What is a layer? How can I get help PDF from CD? I don't have any idea how to use it. I have a Macbook pro.

  Need help with using pse4 not taken in charge by adobe. How subjects do not available and I have never used something like that. Aide said there is a download but have not been able to do. What is a rookie to do? Y at - it somewhere that I can go to learn how to use PSE4?

  To find out how your problem:

  http://kb2.Adobe.com/CPS/402/kb402107.html

  To get help from the CD files you double-click in the finder, go to PDF help and drag it to the desktop or elsewhere.

• Need help with the Simple Question of coding (substring or charAt())

  Hello

  I have what I believe to be a simple matter of coding I was hoping that someone could help answer. I know how to do a decent amount of things but I'm pretty new to Livecycle and trying to change one of our PDF files so that if a certain field has a number starting with number 6 a certain button will become visible. I already have a set of code which is to control the visibility of this button, but I wanted to add this clause. Can someone help me to do this?

  Here are the existing code:

  If ((QuestionsPage2.COIQuestions.COIYN.rawValue == "1" & &))

  QuestionsPage2.EmailButtons.NSFCheck.rawValue == '1') & &

  (QuestionsPage2.ManagerSignature.ManagerDate.rawValue! = null & &)

  QuestionsPage2.ManagerSignature.ManagerCheckBox.rawValue! = null & &

  QuestionsPage2.ManagerSignature.ManagerSignature.rawValue! (= null))

  {

  QuestionsPage2.PasswordSection.RiskPassword.presence = "visible";

  QuestionsPage2.PasswordSection.PurchUseOnly.presence = "visible";

  QuestionsPage2.PasswordSection.HRPassword.presence = "visible";

  QuestionsPage2.EmailButtons.EmailContractsAndRisk.presence = "visible";

  }

  I would like to add at the top to look at the specific area of the first character to see if it is a 6 or not. Here's what I tried to do, but it did not work.

  If ((QuestionsPage2.COIQuestions.COIYN.rawValue == "1" & &))

  QuestionsPage2.EmailButtons.NSFCheck.rawValue == '1' & &

  ContractInfo.AgreementDetails.Org.substring (0.1)! = '6' )

  The type of field, that I'm looking is a field "Digital field" 4 characters.

  Can someone help me fix my code to make it work?

  Thank you!!

  you don't need to make such a work autour, everything you did not notice, this is NumericField isn't a string is always a numeric (number)

  If you can use substring on a whole or decimal number... unless it's a chain... then use the toString() after the .rawValue like this

  ContractInfo.AgreementDetails.Org. rawValue.toString (). Substring (0.1)! = « 6 »

  It should work.

• Need help with the data storage store, local array and network connections

  Need help with my ESXi 4.1 installation

  My hardware:

  I built a server with an Asus P6T whitebox, i7 920, 12 Gig RAM, NIC, Intel Pro1000 PT Quad, 3ware 9650SE-12ML with 8 1.5 TB SATA green in a raid 6 array gives me about 8 + TB with a spare drive all housed within a NORCO RPC-4220 4U Rackmount Server chassis.  I also have a 500 GB SATA drive which will hold the ESXi and virtual machines.

  The network includes a firewall, Netgear Prosafe FVS336G, GS724Tv of Netgear ProSafe 24 port Gigabit Managed Switch on a dhcp cable modem internet service provider.

  I also have 2 old NetGear SC101T NAS disks (4to) I want to connect to the system how some - at a later date have... data on them and want to transfer to the new storage array. I always looking into the question of whether they will work with ESXi 4.1, or I might have to only access it through Windows XP.

  My Situation:

  I have already installed ESXi 4.1 and vsphere client with no problems and it is connected to a dhcp cable internet service.  I've set up host via a dynamic DNS service name give me a static hostname on the internet.  I installed three machines to virtual OS successfully at the moment and now want to first start by creating a multimedia storage server which will use some of this new 8 TB array, then separate data storage for use with a web server small overhead storage and a backup.  It is a domestic installation.

  Help with the data store and network:

  I was doing some reading, because I'm new to this, and it looks like I'll probably want to set up my table via ESXi as a nfs disk format.  Now, the data store is usually in another physical box from what I understand, but I put my readers and ESXi all in the same box.  I'm not sure that the best way to put in place with grouped network cards, but I want to make this work.

  I understand that in ESXi 4.1 using iSCSi LUN must be less than 2 TB, but nfs - I should be able to add a bigger partition then 2 TB (for my multimedia) in nfs, right? or should I still add it separately as a separate 2 TB drives and then extend them to get the biggest space.

  Any suggestions or direct resources showing examples on how to actually add some parts of the table as data warehouses separate nfs.  I know that to go to the configuration tab, and then select Add to storage, and then select nfs. I have not my picture, but it's here that I don't know what to do because ESXi 4.1 system already has an address, should I put the same thing to the new data store array also (will it work?), and what should I use for the name of the folder and the store of data... just do something to the top.  I thought to later install Openfiler (for a multimedia storage using this table server) as a virtual machine, use the table with esxi so that I can access the same storage space with widows and linux-based systems.

  I also know I have to find a way to better use my quad nic card... put in place of virtual switches, grouping, etc HELP?

  Any direction, assistance, similar facilities to sample, suggestions or resources that would help would be great. I did a lot of hunting, but still a little confused on how to best to put in place.

  You must think of VMDK files of large databases with records of random size guest go read some data (a DLL or an INI file), maybe write some data back, then go read other data. Some files are tiny, but certain DLLs are several megabytes. It's random i/o all and heavy on the search time. IO Opsys is small random operations that are often sequential (go read data, write data, go read other data,...) so that deadlines are critical to the overall performance. That's why people say OPS are / s of reference and forget the MBs flow. The only time where you bulk transfers are when you read media (ISO files).

  Well, now forget all this. Actually the disk activity will depend on the specific applications (database? mail server? machines compiler?), but the above is true for boots, and whenever applications are idle. You should see the profile to know.

  RAID 10 is faster (and often more reliable) than RAID 5 or RAID-6 except in certain specific cases. In General RAID 10 is ideal for many random writes, since the calculation of parity for RAID-5 and - 6 adds to the overall latency between command and response - latency is cumulative if a little slow here and a little slow it adds up to a lot of overall slow synchronous especially with e/s on a network. OTOH RAID-5 and -6 can produce faster readings due to the number of heads, so you can use it for virtual machines that transfer bulk. Test. You may find that you need several different types subdashboards for best results.

  You said 3ware, they have some good grades on their site, but don't believe it. With my 9650 that I found myself with only a couple of their recommendations-, I put the (simple) table for allocation size 256 k, nr_requests at 2 x the queue_depth and use the planner date limit. I had the habit for the Ext4 file system formatted with stride and stripe-width synced to the table and used the options large_files with fewer inodes (do not use the huge_files option unless you plan to have single VMDK files in the terabyte range). Use a cache of great reading in advance.

  Virtual machines use VMDK files in all cases except raw iSCSI LUN that they treat native disks. VMDK is easier to manage - you can make a backup by copying the file, you can move it to a PC and load it into another flavour of VMware, etc. There could be some features iSCSI to your San as a transparent migration but nothing for me. NFS has less chatter of Protocol if latency lower times to complete an operation. NFS is good to read and write a block of data, that's all it boils down to.

  UPS is good, but it won't help if something inside the machine explodes (UPS does nothing if the PC power supply goes down). If the RAID card has an option for a battery backup module, so it can contain some writings in memory and may end up the disk i/o after replacing the power supply. 3ware also limits the types of caching available if help is not installed, and you get just the right numbers with the module.

• I'm suddenly needing help with my browser Firefox (6.0.2)

  Hello
  I'm suddenly needing help with my browser Firefox (6.0.2)

  (OS: I use Windows XP).

  When I open the browser, I don't see is a totally white screen of white, with all the toolbars at the top.

  I know that my physical connections are very good: I have tested the modem, turned the pc market etc and I can also receive/send emails.

  This problem started today, September 8, 2011 and has never happened before.

  Is it a coincidence that Firefox itself to day before I disconnected yesterday evening? Could this be something to do with this particular new update?

  I also noticed that just before I "opened" Firefox, I now get a small box indicating:

  [JAVASCRIPT APPLICATION]
  Handl exc in Ev: TypeError: this oRoot.enable is not a function

  This never appeared before - I hope that it offers a clue has what is wrong.

  The browser not be stuck in Mode safe, said by the way.

  Of course, I can't find solutions to the problem on the internet, I don't physically see all Web sites!
  (A friend sends this request in my name from their pc)

  Any light you can throw on this problem of confusion would be much appreciated. I'd rather not have to uninstall and reinstall Firefox if possible.

  If the only option is to uninstall Firefox and reinstall from your site, I'm also in trouble (I can not see the internet or download).
  In this case, would you be able to send the .exe file as an attachment to my e-mail address? In the affirmative, please let me know and I'll give you more details.

  Thanks in advance.

  One possible cause is security software (firewall) that blocks or limits Firefox or plugin-container process without informing you, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox in the list of permissions in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.com/kb/server+not+found
  • https://support.Mozilla.com/kb/firewalls

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions of the origin of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.com/kb/safe+mode

• Need help with installation on Photosmart C7280 all-in-one

  I had my printer is installed and has been using the printer for 3 wireless laptops in my house.  Now, I can't even find my backup drive, so I have need help with downloading the software to use my printer and also get to use wireless.   I don't know what happened, but the fax for this printer is listed, but not the printer itself.   Help, please!

  Click here to download the software for your printer:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=3204785 & LC = on & CC = US & DLC = in & lang = to & CC = US

  has chosen the appropriate operating system that corresponds to your computer and download the full software features.