Need hlp with conversion of the. RAW binary file to image

Similar Questions

• Need help with hissing into the exported audio file

  I am trying to guests Records for a new telephone system that requires separate format: CCITT μ-law 8 bit 8 kHz mono

  Audio is recorded in CD quality and I tried a number of different methods to convert (directly record in the format requested, the type of sample conversion and save, conversion of the type of sample and export, then change session settings to match before recording, etc etc.)

  My goal is to save in a high quality format so that I can clean audio (remove no matter what noise, normalize, etc) and then export it to the required compressed format. But I want to do this without adding additional artifact to the sound.

  Suggestions?

  Thanks for the suggestions. I realized what the problem was. To convert the sample type, dithering is enabled by default. This deactivation CONSIDERABLY improves the result.

• Need help with treatment of the raw image data

  I found that I can access the input raw through params [0]-> u.ld image and the output image I can write via the output in the rendering parameter works. I get most of the information required by the data, the width, the height and rowbytes members of these structures, but I can't understand how to determine the format or bit per pixel images. I would like the process, the data of params [0]-> u.ld.data and write directly to the output-> data, but I need to know the pixel format to correctly interpret image data.

  How can I get the number of bits of the output images? Is there a way to make my plugin support only 128 bits per pixel floatin' fist data?

  the best way to tell the depth of the incoming world is:

  extra-> input-> bitdepth;

  It gives all of the following values: 8, 16, 32.

  the 'extra' is one of the parameters passed to your plugin in the smart_render call, and this is true for the worlds of entry and exit.

  the second way is a little heavier, but you can check everyone with it:

  PF_WorldSuite2 * wsP = NULL;

  ERR (suites. Pica()-> AcquireSuite (kPFWorldSuite, kPFWorldSuiteVersion2, (const void *) &wsP));)

  ERR (wsP-> PF_GetPixelFormat (inputP, pixelFormat));

  ERR (suites. Pica()-> ReleaseSuite (kPFWorldSuite, kPFWorldSuiteVersion2));

  the type of pixel AE uses always is ARGB.

• I need assistance with combine jpeg and raw photo even after import [was: Hello?]

  I need assistance with combine jpeg and raw photo even after importation

  You mean both JPG and RAW file after importing from a camera memory card? There is a setting in LR preferences to process the JPG images next to RAW files as separate photos. It is under the general tab of preferences. By default, this option is not checked.

  If this is not your problem, then we will need Lots and Lots and lots more information about what you mean by the combine

• I have a Nikon D 810 camera and Photoshop CS5.  I downloaded camera 8.8 Raw and DNG converter.  I can't open the raw (.nef) files, and treat them with the DNG Converter. What's not?

  I have a Nikon D 810 camera and Photoshop CS5.  I downloaded camera 8.8 Raw and DNG converter.  I can't open the raw (.nef) files, and treat them with the DNG Converter. What's not?  Thank you!

  As I said earlier, the DNG Converter works ONLY on files, not on files.

  Do not target the individual files.  Target Of THE FOLDER that contains them.

  Make sure that said FILE DO NOT contain any other files , you have already settled before, or your settings will be eliminated when re-converted to DNG.

  No need to write long explanations.  More messages are, the more chances you have of receiving relevant responses.

• Agent 4.0.2 "Unable to locate one of the following binary files" on Linux

  Hello
  
  I have two servers that I'm watching with Hyperic. I had the agent 3.2.x on their job very well. However, when I try to run the 4.0.2 agent, I get an error message whenever I have try to launch HQ - agent.sh.  No idea why?
  
  bin #./hq-agent.sh start
  Cannot locate one of the following binary files:
  root/Hyperic-HQ-agent-4.0.2/Wrapper/sbin/... /... Wrapper/sbin/Wrapper-Linux-Intel (r) xeon (tm) cpu2.40ghz - 32
  root/Hyperic-HQ-agent-4.0.2/Wrapper/sbin/... /... Wrapper/sbin/Wrapper-Linux-Intel (r) xeon (tm) 64 - cpu2.40ghz
  root/Hyperic-HQ-agent-4.0.2/Wrapper/sbin/... /... / Wrapper/sbin/Wrapper
  
  The files needed seem to be in packaging/sbin /.  The contents of this directory on my server is:
  
  sbin # ls-l
  2368 total
  -rwxr-xr-x 1 root root 281540 18 Dec 18:42 wrapper-aix-ppc-32
  -rwxr-xr-x 1 root root 319397 18 Dec 18:42 wrapper-aix-ppc-64
  -rwxr-xr-x 1 root root 88703 18 Dec 18:42 wrapper-freebsd - x 86-32
  -rwxr-xr-x 1 root root 176380 18 Dec 18:43 wrapper-hpux-parisc-32
  -rwxr-xr-x 1 root root 253808 18 Dec 18:43 wrapper-hpux-parisc-64
  -rwxr-xr-x 1 root root 140198 18 Dec 18:42 wrapper-linux-ppc-64
  -rwxr-xr-x 1 root root 99401 18 Dec 18:42 wrapper-linux - x 86-32
  -rwxr-xr-x 1 root root 111027 18 Dec 18:42 wrapper-linux - x 86-64
  -rwxr-xr-x 1 root root 114052 18 Dec 18:42 wrapper-macosx-ppc-32
  -rwxr-xr-x 1 root root 233604 18 Dec 18:43 wrapper-Mac OS x-universal-32
  -rwxr-xr-x 1 root root 112536 18 Dec 18:43 wrapper-solaris-sparc-32
  -rwxr-xr-x 1 root root 148512 18 Dec 18:43 wrapper-solaris-sparc-64
  -rwxr-xr-x 1 root root 110992 18 Dec 18:43 wrapper-solaris - x 86-32
  -rwxr-xr-x 1 root root 204800 18 Dec 18:42 wrapper-windows - x 86 - 32.exe
  
  BTW: I am on 32-bit linux 2.6.17 kernel.
  
  Thank you
  Brian

  HQ - agent.sh first is just a script. It actually run bundles/agent-4.0.0-EE-889/bin/hq-agent.sh script.

  I believe you can manually set the DIST_ARCH parameter to account for your system architecture.

  DIST_ARCH ='uname Pei 2 >/dev/null | TR [: upper:] [: lower:] | "TR-d [: white:]"

  it change something like

  DIST_ARCH = x86_32 (not sure what you have)

• Edit the raw IDML file?

  I have here a document that hangs completely in CS5.

  It's an anchored frame and whenever I delete InDesign crashes.

  I tried exporting to IDML and opening it, but it still crashes CS5.

  Then I tried to open the IDML in Notepad, but this is nothing but the code, what seems strange to me, I thought it was supposed to be a variant of XML?

  in any case, I was wondering if it is possible to edit the raw IDML file so that I can remove the object embedded in the actual file.

  Possible?

  Eugene: an IDML file is a file of zip in disguise. If you're on a Mac you could open in that is Springy, look at its content and display its content XML right out of Springy to, say, TextWrangler. There, you can edit the file and write back to the IDML when closing the file with a "Save" of Springy. I'm sure someone can do it on Windows as well.

  The main problem is to identify the correct XML file (there are many; depends on the size of your InDesign project) and the discription of text right here frame. So if you can download the IDML on a public download site, I can try to get rid of the anchor text block. Of course I need a hint (some unique strings of text) to find the XML file.

  How have you tried to remove the text block? Have you tried using the editor for this mode (you could remove his sign to anchor here).

  Uwe

• MacBook pro work leave because of pulled and broken wire.  I took out the hard drive.  the hard drive has all my files that I wouldn't need to clear all of the other personal files?

  MacBook pro work leave because of pulled and broken wire.  I took out the hard drive.  the hard drive has all my files that I wouldn't need to clear all of the other personal files?

  It does not start to the top, screen and hardware ok except belt disconnected.

  also can I sell adapter, brand new, never used. where can I sell?

  Hi Wally, the hard disk OS X and all of your files. Get a case for your reader, and it backs up. Try OWC

  Always keep your Mac backed up on an external drive with Time Machine or utility of cloning like SuperDuperor double clone.

  Try eBay for the adapter.

• After almost a year of working great, my Lightroom doesn't is more afford to import the RAW of Nikon 7200 images. I upgraded to Lightroom 6.3 and which did not help. What can I do?

  After almost a year of working great, my Lightroom doesn't is more afford to import the RAW of Nikon 7200 images. I upgraded to Lightroom 6.3 and which did not help. What can I do?

  Seems to be a problem with the destination location.

  Try changing the location of destination at the top on the right under 'FOR' pictures folder or any other location on your local hard drive.

• The 11g using uninstall tool to remove the old binary files?

  Hi all
  
  I know that with 11g, the preferred method for deleting old binary files is to use the uninstall tool (in/deinstall/of-install $11G_HOME). However, is it possible for me to remove the old binary files using this tool?
  
  For example, my 11g ORACLE_HOME (that is to say that I want to keep and use) is /opt/oracle/product/11.2.0.3/db
  
  And I have the following binary files on a particular database server:
  
  Oracle@myserver:/opt/Oracle/product > ls
  
  10.2 11.1 8.1.6.2 8.1.7.1 8.1.7.4 9.0.1.0 9.2.0.2 9.2.0.5 agent
  10.2.0.3 11.2.0.3 8.1.7.0 8.1.7.3 8.1.7.4.32 9.0.1.1 9.2.0.4 9.2.0.6
  
  As you can see, I have binary files dating back to before the beginning of time (8.1.6, nice) and I wish I could clean it carefully.
  
  I tried to uninstall (just under the checkonly, to ensure that it "sees" the old house) 10.2 binaries using the 11 g uninstall tool and got the following error:
  
  /opt/Oracle/product/11.2.0.3/DB/deinstall/deinstall-Accueil /opt/oracle/product/10.2/db - checkonly
  Verification of the required files must be treated and...
  Please wait...
  
  ERROR:-House does not have to be defined for a deinstall linking in an ORACLE_HOME.
  Uninstalling the current House is supposed to.
  
  Any thoughts? I absolutely don't want to uninstall the current home!
  
  Mark

  If you want to get rid of the old the ORACLE_HOME, then you must use the corresponding version of uninstall and must be run from the ORACLE_HOME.

  The best way to remove the ORACLE_HOME is to deattaching the old ORACLE_HOME with inventroy and remove this old House.

  /oui/bin/detachHome.sh
  

• After I restart my iMac and double-click on the hard drive, a pop up appears with this message: 'the 'Hard drive' file cannot be opened because you don't have permission to view its contents.'.  What is the problem?

  After I restart my iMac and double-click on the hard drive, a pop up appears with this message: 'the 'Hard drive' file cannot be opened because you don't have permission to view its contents.'.  What is the problem?

  Is the name of an external drive or internal one?

• I have 11 items and wish to treat the RAW / NEF files. How can I do this?

  I have 11 items and wish to treat the RAW / NEF files. How can I do this?

  You can certainly buy PSE14 in the upgrade price. Why not use the link below to install it and try it free for 30 days.

  https://helpx.Adobe.com/Photoshop-elements/KB/Photoshop-elements-downloads.html

• Can someone tell me what 5 Lightroom will be updated to accept the RAW of Nikon D750 images?

  Can someone tell me what 5 Lightroom will be updated to accept the RAW of Nikon D750 images?

  Today, like right now. There is a 5.7, Lightroom now available for download and installation. It includes support for the camera. If you have not yet been notified, go to help-> updates. It should guide you through the update process.

• Lightroom 5 does not read my Raw preview files no images in preview of a file to copy

  Lightroom 5 will not read my RAW preview file, no images in preview of a file to copy.instead States of image file, file preview not available for this file

  What camera, what version of Lr (exactly)?

• Opening the RAW problem files. I can't open the RAW of Sony RX100M3 files with my 11 elements on my Mac.

  When checking in the plugin it says that I have camera raw version 7.4.0.137.

  What should do?

  rikardt9794459 wrote:

  When checking in the plugin it says that I have camera raw version 7.4.0.137.

  What should do?

  The full response is in this faq:

  FAQ: Photoshop Elements will work with my camera, or why does not open my raw files?

  In short, the first link shows that you need version 8.5

  Camera Raw plugin | Supported devices

  The other tells that PES cannot be updated more than 7.4 (you up to do date)

  Applications of camera Raw compatible Adobe

  So, if you don't want to update to PSE13 (see the limitations for PSE12), you can use the free DNGconverter that can convert batches of your raw files to DNG raw format that PSE11 can read. (download at the bottom of the faq link).