Need information about memory in real time

Similar Questions

• need help with the CVI real-time

  Hello

  I'm new to CVI real-time and need help related to this. I'll explain my scenario:

  1. I have a few configuration files (INI). Need to validate the files (the range... check etc.) when the application is started.

  2. when the user clicks on 'START' in the user interface on the host machine, I need to generate outputs (analog/discrete...) according to the settings in the config file and read a few entries of other instruments. (I/O such tasks that generate outputs/inputs, I intend to perform beside reading RT)

  3. from the user interface, user can also change the configuration files. If the user modifies the files, file validation must again be made. After editing files, if the user clicks on START, the need to take the new entry to perfom tasks I/O configuration files.

  4. I am NOT using reflective memory for my application.

  I am confused in the following area:

  1 file validation during startup, I have to perform on host and on the side of RT?

  2. If the configuration files are changed in the host side user, how I send the names of files to RT? I think that I should not send the file names, I need to read from the file and its contents, I need to move on to Rt.... Pls correct me, I'm not sure about this...

  3. If I send the contents of the file to the RT, how do I do... I have to use structures, means... ???

  Please guide me. Any help would be much appreciated.

  Kind regards

  Samantha

  Hey Samantha,.

  1 file validation during startup, I have to perform on host and on the side of RT?

  It depends on the full range of responsibilities for INI files. If they are necessary simply to change what the I/O are for, then you would be technically just validate the content of the file INI on the side of the RT. However, you could post on both sides if you wanted to. However, I would probably set up as I have send a validation to the target control, have the target run a component of the code that validates the INI content based on how I loaded it and then returns a message that says if it meets the requirements I specified. However, if you are concerned with unloading of this process on the user's desktop (to the contrary increase the performance of the RT controller), you may FTP the file to the rheostat and perform the process of validation of the side host.

  2. If the configuration files are changed in the host side user, how I send the names of files to RT? I think that I should not send the file names, I need to read from the file and its contents, I need to move on to Rt.... Pls correct me, I'm not sure about this...

  You can send them to the target by FTP. This can be done programmatically, by MAX, command or a Web browser window.

  3. If I send the contents of the file to the RT, how do I do... I have to use structures, means... ???

  It is basically addressed in answer to question two. You would not need another structure in your code of RT to manage the FTP receive component as this is handled by the FTP Client/server communication. However, in case you successfully FTP a file to the target, you should probably send a message between the host and the target so that the target can react accordingly and reload the file I/O values, run an inactive procedure, or do what you want.

  I hope this helps. Have a great day!

• Need information about Toshiba 15.4 "Intel Duo Core 2 T5800

  Can someone give me your opinion on any information on this computer. I found it in a FuturShop store for $ 999.99.
  However, I can't find any information about it anywhere online.

  A friend told me that it is a new special edition laptop or something. I need a difficult computer as I do a lot of traveling and I'll it use for photos, music, videos, home financing, internet, excel, word, etc. Some games but not a major concern.

  Any info on the webcam, DVD burning capabilities and scalability would be appreciated.
  Here are some of the specifications. I'm not too knowledgeable about computers, so I hope I gave enough relevant information. Thanks in advance.

  4 GB DDR2
  Hard drive 320 GB

  Help

  Well buddy, most of the information and details about all real Toshiba notebooks are on the page of Toshiba Europe.
  http://EU.computers.Toshiba-Europe.com

  Here you have to execute the search in the field of portable computers

• Need information about Toshiba Reeltime

  Hello, could someone please tell me what Toshiba Reeltime is and how it works? He said nothing about it in the owners manual.

  Thank you

  * REEL TIME *.

  + Toshiba ReelTime is a tool graph history/indexing that allows you to view the files recently viewed in a fun and easy to use format. Display and scroll your story to open or import files via thumbnails in an intuitive user interface. Your ReelTime display can be customized according to user preferences. +

  + Toshiba ReelTime overrides the method of hunting-and-click to the old find your files with a Visual timeline or coil, now, instead of questions like: where is it? you simply ask when I use it? He's you spend less time for research, more time to do and enjoy and keep your day at high speed. TOSHIBA ReelTime displays a row of your latest files as the graph shows a preview at the bottom of your screen, making it easy to see at a glance what s it. Browse your reel to find the file you need. Then, keep it handy by drag-docking station it is close. Brush your finger or the mouse is all it takes. ReelTime simplifies the follow-up research and index documents and programs that you open automatically. It brings together and presents them as visual thumbnails so you can easily find what you are looking for. +

  + Toshiba ReelTime also lets you cut through the clutter by filtering the files that you want and honing in on those you do. Group photos, files and clips by type or by program to watch last month s book collection, videos for display in line waiting or preparation for the construction of a new album of beautiful photo. For all the things you want to do, Toshiba ReelTime allows you to save a lot of time. +

  To open the real time of TOSHIBA:

  Click on the start menu.
  Enter 'Real' in the search field.
  Click on "Real time" in the results of research.
  The real time TOSHIBA will open. By default, "Everything" is selected, showing all the files in chronological order. Then you can choose to view documents, pictures, videos, as well as other elements.
  To learn more about TOSHIBA real time, click the question mark in the lower right of the screen.

• Need information about Satellite L30-134

  Hey, I know this off another machine brand new Tablet and all, but hey, I can't find a single web page with information on this machine other than what is in the manual sold with the laptop.

  I like a seasoned PC enthusiast I had a lot of questions about this machine also, (I'm already impressed with its capabilities for the price you get really shot for your bucks...) I would like to know the socket U23 does not say my much.

  Can I upgrade the processor? The BIOS is also very limited. Y at - it an upgrade? I would like to know if I can disable smart perform duel memory modules or change the amount of memory dedicated to graphics? I was seriously thinking of launching a forum of my own to find out these mysteries, after all it is a popular purchase, I saw two other people, the purchase of this machine on the same day as me...

  I need input, anyone can meet my desire for more information?

  Hello Tom

  Weather, you are passionate about PC, but I fear that you will be a little disappointed because with laptops you can not do much. I hope you know a lot about desktop computers and upgrade opportunities. The situation with laptops is completely different. Upgrade opportunities are minimal and there is not much to do.

  When you buy from office, you will get a user manuals of motherboard with all the information about it. Computer laptop manufacturer doesn t give something like that because there is no possibility of upgrade for processor and graphics card. The construction of the laptop is very complicated and many powerful hardware components are placed on the very small box. A common problem with laptops is cooling and how to remove the heat.

  Laptop manufacturer has two priorities: build the right machine and also build with unassailable cooling system to protect the material and portable secure long life. There are many things that must work harmonic.

  You can upgrade RAM to HARD drive, but not anymore. Using different settings, you can try to improve your laptop for use. All that s!

  Through Satellite L30 really isn't the best Toshiba laptop and one of the units of low-budget and you can not expect impressive performance.

• Leak memory in real time caused by VISA Read and timed loop of data nodes? Is not supposed.

  In collaboration with LV 8.2.1 in real time to develop applications that monitor or emulate computers on bus RS-422.   The following screenshots have been taken an application that monitors a transmission of 200 Hz.  After a few hours, the PXI station would break a range impressive messages angry... most involving something about memory loss.  After much hair pulling and passing money, my partner has discovered while looking at the available memory on the controller of loss of memory occurred at each loop containing a VISA read and propagation of error using the data nodes (see Leak.jpg of memory).  He concluded that if he went to the propagation of the error to the regular old shift registers, then the available memory was rock-solid.  (has the Leak.jpg of No memory)

  Any ideas of what could be the cause?  Do you see not any problem with the way that we code these kinds of loops?  We always strive to optimize the way in which we use the memory on our urgent requests and VISA readings and DAQmx bed give us the heartache more than ever, we are able to allocate memory for these screws some tips?

  Dan Marlow

  GDLS

  Hi thisisnotadream,

  This problem has been reported, and you seem to be exactly reproduce the conditions required to see this problem. This was reported to R & D (# 134314) for further investigations. There are several possible solutions, of which one is the one you have already found the wiring error directly in the loop. Other situations which give rise to no memory leak are:

  1 if the bytes of the property node port is not there and has read lies in each iteration and time-outs resulting are ignored.

  2. If the structure of the deal is gone and just blindly check the bytes to the port and read each iteration.

  3. If the timed loop is transformed into a while loop.

  Thanks for the comments!

  Kind regards

  Stephen S.

• I need information about keychain.

  I sought help in my iMac and sought here in Apple Support communities for more information on keychain. Nothing shows that relates to my request. Which currently has told me is that Keychain linked all my Apple devices. Recently, I changed my password. When signing into iCloud, still asked me to set up the keychain. This time, I decided to choose this option. Unfortunately, now I must enter this password ID Apple really long and complicated, whenever I turn on my devices. I had no information implementation of trousseau would require me to type my password Apple ID in order to access my devices. Where can I find detailed explanations about the keychain?

  Hello Anthony,.

  I understand that you are looking for some information about iCloud keychain. I would start by searching on the information contained in the below FAQ page to see if this will give you the information you're looking for.

  Frequently asked questions about iCloud keychain
  https://support.Apple.com/en-us/HT204085

  Let me know if that helps at all.

  Take care

• Need information about the data included in the example for the inner race with flaws

  Hello

  There are several examples for fault detection in bearing (Vibration tool sets). I need more information about these data include:

  -Bringing its specifications

  -How to perform data acquisition

  -a link to the tutorial

  I came across this manual that shows how to use OATS envelope detection VI to perform detection of failures of bearings.

  http://zone.NI.com/reference/en-XX/help/372416A-01/svtconcepts/cst_speed_brg/

  It lists the specifications of turnover:

  • Inch diameter 0,2813
  
  
  • Primitive diameter: 1,1228 inch
  
  
  • Speed: 1 234 RPM

  It also goes to the list of characteristic frequencies determined by these attributes.

  The data acquisition is carried out by the use of an accelerometer and a tachometer. These devices measure the vibration and the rotation speed of the bearing data. Failure detection uses a method called detection of the envelope to look at the signals of the bearing and compared to signals of standard bearings to the discovery of flaws. You can learn more about the method of acquisition of data here:

  http://zone.NI.com/reference/en-XX/help/372416A-01/svtconcepts/fault_detection/#Envelope_Detection

  The first link is a tutorial on the detection of failures in the bearings. The end of the link provides the location of an example VI that may also be useful.

• Need information about the Tables in database in Oracle Apps

  Hello

  I am looking for information about the Tables in database in Oracle Apps.

  Is it possible that we could see the (column name, description of each column, the primary key, foreign key etc.) the table structure in database (e.g. HZ_PARTIES, CS_INCIDENTS_ALL_B, csf_debrief_headers) used in Oracle 11i applications?

  ETRM. Oracle.com

  concerning

  Pravin

• Need information about Equium A60

  Hello
  I'm looking to upgrade of RAM on my laptop which is an Equium A60 (PSA67E-001004NO). I need to know how fast my motherboard supports... I posted a question a while back and got the impression that my laptop can take up to 533 mhz, but I confirm other locations and had the idea that my laptop supports 333 mhz. I need to know the correct value of that my motherboard supports. If its 333 mhz or more on...

  One thing more I need to know is possible we can control the configuration this laptop has, because there is nothing on this satellite on the net or the Toshiba site...
  I remember seeing a page on which all the hardware and pre-installed software Details of Equium A60 PSA67E-001004NO have been on the net but I can't remember where I saw it...
  If anyone can help somehow?

  Hello

  Your laptop is 256 MB internal memory and a location is available to expand the memory. I found the information that your device can handle with max 1280MB.

  The compatible memory modules are:
  PC2700 256 MB (PA3311U - 1 M 25)
  PC2700 512 MB (PA3312U - 1 M 51)
  1024MO PC2700 (PA3313U-1M1G)

  If you want to check the numbers on Google and you will find all the info on these modules. I have not the time now to check it out for you.

  Good bye

• I have a power shot sx HS 40 & need information about the use of filters with this camera? Thank you ~.

  I have a power shot sx 40 & would like information on the use of filters with this device?

  Thank you ~.

  Hi Rainlily,

  You will need the # model Canon adapter filter f-DC67A to use filters on this camera, which costs about $25.00. Bower makes one for about $9.00 available in B & H and Bower products work well with the Canon. This adapter uses 67 mm filters. If you have not yet all filters, I would recommend Hoya or Tiffen filters as they are of high quality at reasonable prices. Do not get the expensive filters because in general they can cause color casts that may be difficult to view the process on. Have fun!

  Steve M.

• Need information about Windows 8 OEI license

  Hello

  I bought the Windows version 8 only language OEI 'Win SL 8 Win32 Eng Intl 1pk DSP OEI DVD région-EM' in short.

  

  I installed the operating system, but I was unable to uninstall my previous OS Windows 7, so I used the Windows 8 DVD to clean up and format my hard drive

  using CMD, because so far there I did not aware of this site.

  Then, once I have installed the operating system with the same key present on my DVD pack. For the second time after installation I upgraded to 8.1 Windows from Windows 8 App Store and my PC was completely destroyed. I could rarely move my mouse.

  Once again, I did the same thing and yet installed Windows 8 from the same DVD with the same key and even activated my Windows. And now I'm fine.

  Yes, after the installation of Windows 8 from the same disk with the same key for the same email * address email is removed from the privacy * on the same PC I be able to reinstall it from the DVD even if some emergency happens? Even if I read the license that says that "the software in the package cannot be used: more than five copies of the software (in total) for a commercial uselicense", but I use it for personal use. ".

  Please inform me in detail.

  Hello

  I bought the Windows version 8 only language OEI 'Win SL 8 Win32 Eng Intl 1pk DSP OEI DVD région-EM' in short.

  

  I installed the operating system, but I was unable to uninstall my previous OS Windows 7, so I used the Windows 8 DVD to clean up and format my hard drive

  using CMD, because so far there I did not aware of this site.

  Then, once I have installed the operating system with the same key present on my DVD pack. For the second time after installation I upgraded to 8.1 Windows from Windows 8 App Store and my PC was completely destroyed. I could rarely move my mouse.

  Once again, I did the same thing and yet installed Windows 8 from the same DVD with the same key and even activated my Windows. And now I'm fine.

  Yes, after the installation of Windows 8 from the same disk with the same key for the same email * address email is removed from the privacy * on the same PC I be able to reinstall it from the DVD even if some emergency happens? Even if I read the license that says that "the software in the package cannot be used: more than five copies of the software (in total) for a commercial uselicense", but I use it for personal use. ".

  Please inform me in detail.

  Yes, you can reinstall as many times as you want using the same license on the same computer, no problem. You may need to reactivate by phone but after installation 5. Your OEM license also includes the transfer of rights, so if you want to move to a new computer, you can do it.

  http://personaluselicense.windows.com/en-US/default.aspx,

  
  

  "I can transfer the software to another computer or user? ." You can transfer the software to another computer owned by you. (You can also transfer the software (as well as the license) to a computer that belonged to someone else if one) you are the first user under the software license and b) of the new user accepts the terms of this agreement. To make a transfer, you must transfer the original media, the certificate of authenticity, the product key and the proof of purchase directly to the other person, without keeping all copies of the software. You can use the backup copy that we do or the media the software provided on transfer the software. Whenever you transfer the software to a new computer, you must remove the software from the previous computer. You can not transfer the software to share licenses between computers. You can transfer the Get Genuine Windows, Pack Pro or Media Center Pack software only in combination with the licensed computer. »

• Need information about the licenses on DB and EBS

  Hi all

  Nice day!

  I have a few questions regarding licenses in Oracle. And will appreciate the supporting by the Oracle Doc for reference.

  My DB version is 11.2.0.3 and the Oracle eBusiness Suite version 12.1.3.

  1. we bought 100 NUP for DB. However, when I checked with the following query:

  Select * from dba_users where account_status = 'OPEN '.

  The list of users exceed 236 (Note its an ERP instance), where the number of users we have created by me is just 4-5. Others came to OPEN by default (including system, dbsnmp, sysman etc.).  They should be counted in the licenses that they are installed before users?

  2. I have observed that some users dba open are for modules that we do not use. Can they be locked safely? [For example.] IPD, user of the LEAGUE]

  3. Select * from fnd_user where End_date is NULL; give me a count of 69 users, which users created by us are about 20 and we bought licenses approximately 40.  We need to have licenses for the rest 29 as well?

  4. we realized that it might be necessary to add the virtual machine additional JAVA in oacore (now 2), we need to have separate licenses for this (oacore, oc4j, Association etc.)?

  I have tried to find some references in the meantime and will appreciate if you have some references of loans.

  Concerning

  Karan Kukreja

  PS: Dear Mods and Admins. If this isn't the right to group, please suggest or move this message to the right group. GUI of the community has changed a lot since my last connection. Thank you.

  Karan,

  Your account manager Oracle should help answer these questions. You can see the prices and license management and see if the information in these guides help.

  Thank you

  Hussein

• Satellite Pro A10 - need information about upgrading RAM

  Dear members of Ant
  Regarding the above machine: Please can someone advise:-how many slots memory has.
  I think it's two but do not know.
  Also size maximum memory can this module we have in this laptop please.
  If it's 2 @ 1 GB per module, then we would have a total of 2 GB.

  Is the standard hard drive on this computer, a hard drive of the laptop. Can I get out the small 20 GB one and replace it with a larger. for example 120 GB etc.

  Thank you very much for your help.
  Ian

  Satellite Pro A10 two memory locations are available. Laptop computer can manage with 1 GB of RAM and you can use two compatible PC2100 512 MB (PA3164U - 1 M 51) modules.

  This old machine uses 2.5 HDD with old IDE connector. I found some info that it has been bundled with 20GB, 30GB and 40GB HDD. I think you can improve it with up to 100 GB HARD drive but just to be sure he has the same connector on the HARD drive.

  If you have any other questions you are welcome.
  For more information after the exact model number please.

• Need information about ODD on my Satellite M100-222

  I have some problems with my optical device Satellite M100-222 - HL-DT-ST DVDRAM GMA-4082N
  I want to replace it with the same device or similar, I want to buy the same device but search results for GMA-4082N is not satisfactory.

  I need the correct information on some similar device for my laptop...

  In my view model name and model is best info you can get. I put t know what you want to have concrete information. Serial number maybe?

  Remove the optical disk drive and check sticker on it. You will find everything you need.