Need of the ACL kung fu for VPN from Site to Site ACL problem
Group,
Have a little problem I know is related to ACL. I wanted to have a few experts to take a look at my config please. Here's the question:
Attempt to create a site between two offices, but for some reason any that they cannot ping each other. It is a strange thing.
97.XX.231.22 <-->71.xx.160.123
I can ping both firewalls from the outside using a computer to another, but from the internal firewall utilities, they cannot ping each other. At the same time I can ping to their respective gateways.
Secondly, I did an interior outside translation as you can see here for 80 & 443 preventing me from browsing http and https via VPN for Remote LAN, can it be modified to allow access? I can access when I dial in via VPN client but not via permanent VPN tunnel. Here is the config.
no ip nat service sip 5060 udp port
IP nat inside source map route SDM_RMAP_1 interface GigabitEthernet0/0 overload
IP nat inside source static tcp 10.41.14.103 80 71.xx.160.123 80 extensible
IP nat inside source static tcp 10.41.14.103 71.xx.160.123 expandable 443 443
IP route 0.0.0.0 0.0.0.0 71.xx.160.121
IP route 10.67.188.32 255.255.255.224 10.41.14.99 6 permanent
IP route 10.67.188.96 255.255.255.224 10.41.14.99 8 permanent
IP route 10.200.107.0 255.255.255.0 10.41.14.99 9 permanent
IP route 10.200.110.0 255.255.254.0 10.41.14.99 7 permanent
IP route 74.200.107.0 255.255.255.0 10.41.14.99 5 permanent
IP route 74.200.110.0 255.255.254.0 10.41.14.99 4 permanent
IP route 208.67.188.32 255.255.255.224 10.41.14.99 2 Permanent
IP route 208.67.188.96 255.255.255.224 10.41.14.99 3 permanent
!
auto discovering IP sla
Logging trap errors
host 192.168.10.29 record
access-list 2 Note HTTP access class
Note access-list category 2 CCP_ACL = 1
Note access-list 2 Platinum LAN
access-list 2 permit 10.41.14.0 0.0.0.255
access-list 2 refuse any
Access-list 101 remark rules Master
Note access-list 101 category CCP_ACL = 1
Note access-list 101 FaxFinder WWW traffic
access-list 101 permit tcp any host 71.xx.160.123 eq www
Note access-list 101 traffic HTTPS FaxFinder
access-list 101 permit tcp any host 71.xx.160.123 eq 443
Note access-list 101 NTP Time Protocol
access-list 101 permit udp any host 71.xx.160.123 eq ntp
Access-list 101 remark IPSEC protocols
access-list 101 permit udp any host 71.xx.160.123 eq non500-isakmp
Access-list 101 remark IPSEC protocols
access-list 101 permit udp any host 71.xx.160.123 eq isakmp
Note access-list 101 traffic ESP
access-list 101 permit esp any host 71.xx.160.123
Note the access list 101 General License
access list 101 ip allow a whole
Note access-list 102 CCP_ACL category = 2
access-list 102 deny ip 10.41.14.0 0.0.0.255 192.168.76.0 0.0.0.255
Note access-list 102 IPSec rule
access-list 102 deny ip 10.41.14.0 0.0.0.255 10.0.2.0 0.0.0.255
Note access-list 102 IPSec rule
access-list 102 deny ip 10.41.14.0 0.0.0.255 192.168.10.0 0.0.0.31
Access-list 102 remark Platinum LAN NAT rule
access-list 102 permit ip 10.41.14.0 0.0.0.255 any
Note category from the list of access-104 = 4 CCP_ACL
Note access-list 104 IPSec rule
access-list 104. allow ip 10.41.14.0 0.0.0.255 192.168.10.0 0.0.0.31
Note access-list 108 CCP_ACL category = 4
access-list 108 allow ip 10.41.14.0 0.0.0.255 any
Note access-list 109 IPSec rule
Note access-list 109 CCP_ACL category = 4
access-list 109 allow ip 10.41.14.0 0.0.0.255 192.168.76.0 0.0.0.255
Note access-list 110 CCP_ACL category = 4
Note access-list 110 IPSec rule
access-list 110 permit ip 10.41.14.0 0.0.0.255 10.0.2.0 0.0.0.255
not run cdp
!
allowed SDM_RMAP_1 1 route map
corresponds to the IP 102
There is more then one way how you can achieve this goal.
(1) the best way is possible if the two VPN counterparts are IOS routers. Then you can migrate to virtual VPN - tunnel interfaces (VTI). With this, the external interface doesn't mix - and non-VPN-traffic VPN.-->
(2) if VTI is not possible, you can restrict the translation to only non - VPN traffic using a roadmap:
object-group network RFC1918
10.0.0.0 255.0.0.0
172.16.0.0 255.240.0.0
192.168.0.0 255.255.0.0
NAT-SERVER - 10.41.14.103 allowed 10 route map
corresponds to the TRAFFIC-NAT-SERVER IP - 10.41.14.103
TRAFFIC-NAT-SERVER extended IP access list - 10.41.14.103
deny ip host 10.41.14.103 object-group RFC1918
permit tcp host 10.41.14.103 eq 80 a
allow a host EQ 10.41.14.103 tcp 443
IP nat inside source static 10.41.14.103 71.xx... map route NAT-SERVER - 10.41.14.103
What makes that?
When your server communicates with a system with an address in the range RFC1918, then the road map does not correspond and the translation is not used. It is you, the VPN scenario. But if the server communicates with a non-RFC1918 address, then the translation is used and the server can be reached.
--
Don't stop once you have upgraded your network! Improve the world by lending money to low-income workers:
http://www.Kiva.org/invitedBy/karsteni
Tags: Cisco Security
Similar Questions
-
How to open the manual mini port for vpn connection in win7?
How to open the manual mini port for vpn connection in win7?
Hi Andrew,
Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It would be better suited to the TechNet community.
Please visit the link below to find a community that will provide the support you want.
http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads
-
Why can't I configure the POP/IMAP mails for my Muse site in Business Catalyst? I don't have the option "use this service for e-mail as hosting the Web site" under Advanced options.
Is this due to my hosting Plan? Appreciate the answers.
Your site is a CCM that is located on a WebBasics plan (this plan does not e-mail hosted on Business Catalyst).
If you want to create the email addresses on this site, you will need to configure your mail elsewhere server and configure the MX records on your site to point to the external mail server.
If you want to use the hosted Business catalyst e-mail services, you should use a WebBasics + or superior siteplan. To upgrade your free CCM site, access administration area of your site-> Site Management-> upgrade now-> choose the desired site plan and billing frequency-> Add personal and credit card details-> Submit.
Please see this article on setting up email on your site of BC accounts: http://docs.businesscatalyst.com/user-manual#! / settings/mail electronic-users of the site -
For the establishment of the records point to the external mail server, see http://docs.businesscatalyst.com/user-manual#! / settings/email-users/creation-boxes of reception-for-your-users of the site
Kind regards
Laurant
-
Hi, I answered no to the question on the registration of password for a spesific site. I changed my mind and would like Firefox to save the password. How to re-enable password for a spesific site saver?
Check the list of exceptions to your Firefox password manager and check if your site is there or not?
-
Is the CQ5.6 of the AEM is available for download from trail?
Is the CQ5.6 of the AEM is available for download from trail? where can I find the link to download the track of CQ5.6 MEA
Please post your request in the community of the Cloud Marketing Adobe - http://help-forums.adobe.com/content/adobeforums/en.html.
-
VoIP QoS for Tunnel from Site to Site
Hi all
I need help to configure QoS for VoIP between two Cisco ASA 5505 with VPN Site to Site.
There is no need for bandwidth reservation, only 46 (EF) DSCP should be higher and DSCP 26 second queue higher and rules apply only to a site to site VPN.
Usually, I try to configure the ASAs via ASDM and discovered in the documentation Cisco how configure QoS DSCP bits with a Service policy and how to configure QoS for a VPN from Site to Site (rule Service-> Match traffic strategy). But how to configure QoS for a bit DSCP applies to Tunnel from Site to Site? And how configure different priorities for both DSCP bits, this is defined by the order of political Service?
The quality of service must be activated on the two ASAs to inside interface?
Thanks in advance
Tobias
Like most-
class-map voice_traffic
match dscp ef
match dscp 26 -
How can I block a VPN from site to Site traffic
I configured a VPN from Site to Site, the wizard on a
ASA 5510 and it works.
However, I want to restrict http traffic only.
I tried to change the ACL entry that allows ip traffic to allow only http traffic, but that seems to block all traffic and translates into a journal entry:
Inbound TCP connection doesn't deny x to Y/80 SYN flags on the incoming interface.
I managed to block pings by entering an ACL rule to specifically deny icmp, but I would like to deny all except http.
Any advice on how to achieve this appreciated.
William.
Hello
Guess that's what you're looking for. See the Bidirectional VPN filter configuration section.
-
Limit remote traffic in a VPN from Site to Site
I have a setup VPN from Site to Site in a lab using two ASA5505s environment. VPN site to Site is functional however, what I wanted to do is to deny all traffic between the Remote LAN and not allow a single host to access the local network. Is it convenient or can it be done? If so, what Miss me the following ACL do not seem to effect?
Remote LAN: 172.16.1.0/24
LAN: 192.168.1.0/24outside_access_in list extended access permitted tcp 172.16.1.100 host 192.168.1.100 lytic 5000 10000
outside_access_in list extended access deny ip 172.16.1.0 255.255.255.0 192.168.1.0 255.255.255.0
Access-group outside_access_in in interface outsideAppreciate any help that anyone can give.
Hi tsabsuavyaj,
By default, the sysopt connection VPN-enabled command is enabled which will bypass your list of access-interface referenced for all VPN traffic.
To resolve this problem, you can:
- Run the command No sysopt connection VPN-enabled. Caution with this, because it has global effect, which means it will interrogate ACL interface for all incoming VPN traffic.
- Change your proxy-ACL (aka ACL interesting traffic) so that your remote control network is simply the address of the host that you would like to have access to your network. In so doing, nothing else is routed through your tunnel L2L at the remote end. This ACL must be mirrored on the other side (remote), so that the proxy-ACL must change so that its share of the 'Local network' is only the appropriate host and nothing else.
Please let me know if you have further questions/clarification.
Kind regards
Kevin
* Do not forget to note the useful messages but also to mark it as 'responded' once your problem is solved. This will help others find your solution more quickly.
-
SA520W VPN from Site to Site with several VLANs
Hello
I have a customer here with several VLANS in their places who wants to set up a VPN from Site to site between 2 devices SA520W. Unfortunately I can not find a way to set it up. In the VPN policy, I can choose between everything (which is not what I want, I want only traffict between subnets the routed via VPN), IP address unique, a beach (in a subnet) and a subnet itself - but only one. I don't find a way to configure several subnets in the selection of local traffic and remotely. Adding another IKE policy between the 2 sites does not either (which is good normally).
Any ideas? Anything I'm doing wrong?
Thank you for your help.
Best regards
Thomas
I know that if you have an ASA or a router, you can define as VLANS to pass through the tunnel.
Do not have access to a SA520W to test...
A recommendation might be to post the question on the SMB community where they answered questions related to this product, just to check what other people did.
Federico.
-
I removed the check mark to "Accept cookies from sites" in the Privacy tab, but when I restart Firefox the check mark is back! This problem started with version 3.6 and so I upgraded to version 5, but the problem remains. Any suggestions?
Preferences are not saved
https://support.Mozilla.com/en-us/KB/preferences%20are%20not%20saved
Check and tell if its working.
-
The application of SECURITY for VPN LAN to LAN traffic!
I have a question on the forum,
Can apply you security for inbound ipsec traffic once it has been deciphered? I did some research and cannot come to this conclusion, with a LAN to LAN Vpn using ipsec allowed sysopt command bypass you all ACL audit (the access list incoming or conducted applied to the external interface) and cannot so apply any security to inbound traffic to your internal network via the VPN any VPN interface ends at. It is my understanding that instead of using the permitted sysopt command ipsec, you can allow protocol 50 (esp) in your firewall allowing traffic to reach the firewall and be decrypted BUT can you then apply any security to it? He will re-evaluate himself against the inbound ACL applied to the external interface?
-Jeremy
Hi Jeremy,.
Your understanding is to a specific point. Once the packet is decrypted, it will reassess not himself against the acl entering applied outward whetther regardingless configuring acl or use sysopt. Thank you
Renault
-
Inside Source NAT from the remote host and VPN from Site to Site
Hi all
I was in charge of the construction of a vpn tunnel with a firewall PIX of our business partner company and ASA of the other company of the firewall. Traffic will be A partner business users will access my company Citrix server. I want to source-pat the user traffic partner company to PIX of my business within the interface to its entry in my LAN to access my company Citrix server. The partner company will be PAT'ing their traffic from users to a single ip address - Let's say for discussion end is 65.99.100.101. There is the site to site vpn configuration, and configure nat be performed to allow this traffic in accordance with the above provisions.
I'm more concerned about the accuracy of the configuration of the domain encryption because NAT is involved in this whole upward. My goal is to NAT (of the other company company a) ip address to a routable ip address in my company network.
The fundamental question here is should I include the ip address of real source (65.99.100.101) of the company the user or IP natted (10.200.11.9) in the field of encryption.
In other words should the encryption field looks like this
OPTION A.
permit ip host 10.200.11.103 65.99.100.101
OR
OPTION B
permit ip host 10.200.11.103 10.200.11.9
I'm inclined to think it should look like OPTION A. Here's the part of MY complete SOCIETY of the VPN configuration. I've also attached a diagram illustrating this topology.
Thanks in advance,
Adil
CONFIG BELOW
------------------------------------------------
#################################################
Object-group Config:
#################################################
the COMPANY_A_NETWORK object-group network
Description company network access my company A firm Citrix
host of the object-Network 65.99.100.101
the MYCOMPANY_CITRIX_FARM object-group network
Description farm Citrix accessible Takata by Genpact
host of the object-Network 10.200.11.103
################################################
Config of encryption:
################################################
crypto ISAKMP policy 20
preshared authentication
3des encryption
sha hash
Group 2
life 86400
********************************
CRYPTO MAP
********************************
crypto Outside_map 561 card matches the address Outside_561_cryptomap
card crypto Outside_map 561 set peer 55.5.245.21
Outside_map 561 transform-set ESP-3DES-SHA crypto card game
********************************
TUNNEL GROUP
********************************
tunnel-group 55.5.245.21 type ipsec-l2l
IPSec-attributes tunnel-group 55.5.245.21
pre-shared-key * 55.5.245.21
*******************************
FIELD OF CRYPTO
*******************************
Outside_561_cryptomap list extended access permitted ip object-group MYCOMPANY_CITRIX_FARM-group of objects COMPANY_A_NETWORK
###########################################
NAT'ing
###########################################
Global (inside) 9 10.200.11.9
NAT (9 genpact_source_nat list of outdoor outdoor access)
genpact_source_nat list extended access permit ip host 65.99.100.101 all
genpact_source_nat list extended access permit ip host 65.99.100.102 all
! For not natting ip address of the Citrix server
Inside_nat0 list extended access permitted ip object-group MYCOMPANY_CITRIX_FARM-group of objects COMPANY_A_NETWORK
You must include pre - nat ip 65.99.x.x in your crypto-card, like you did.
For me, config you provided here looks good and meets your needs.
One thing, I do not see here the nat rule real 0, but there is the ACL that NAT. probably, you just forgot this rule.
65.99.100.101 #sthash.mQm0FIOM.dpuf
-
Hello
7.0 (1) version pix
ASDM version 5.0 (1)
I have a situation where you go paas-thanks to the VPN feature goes on our PIX 515E. I tried to put this on the pix using a VPN Wizard Site to site
who is enabled. I was unable to connect to the pix from the remote site. Witch's journal replied negotiate the pix is OK and the success
The problem is when I try to set up the tunnel to the top of the remote site. I fall without failure.
where can I see the vpn pix for error log?
is there a manual for the solution of site to site VPN using the wizard
Help, please.
Thanks in advance
the section 'use adsm' (step 14) gives an example on how to set up vpn lan - lan via adsm
Newspaper to go to the section "check".
-
NAT-XLATE-FAILURE on the VPN from Site to site connection.
I had configured a VPN of Site to new site on my network, once I created Tunnel appears, but there is no traffic when I made trace packet its gave me error "(NAT-XLATE-FAILED), NAT has failed."
Here is the configuration runing.
ASA 9.1 Version 2
!
ciscoasa hostname
activate 2KFQnbNIdI.2KYOU encrypted password
names of
IP local pool kecdr 10.100.1.1 - 10.100.1.50 mask 255.255.255.0
local pool KECVPN 10.2.1.200 - 10.2.1.225 255.255.255.0 IP mask
!
interface GigabitEthernet0/0
nameif outside
security-level 0
IP 168.187.199.66 255.255.255.252
!
interface GigabitEthernet0/1
nameif inside
security-level 100
10.2.1.1 IP address 255.255.255.0
!
interface GigabitEthernet0/2
nameif DMZ
security-level 50
IP 10.60.1.2 255.255.255.0
!
interface GigabitEthernet0/3
Shutdown
No nameif
no level of security
no ip address
!
interface GigabitEthernet0/4
Shutdown
No nameif
no level of security
no ip address
!
interface GigabitEthernet0/5
Shutdown
No nameif
no level of security
no ip address
!
interface Management0/0
management only
nameif management
security-level 100
IP 192.168.1.1 255.255.255.0
!
passive FTP mode
DNS domain-lookup outside
DNS lookup field inside
management of the DNS domain-lookup service
DNS server-group DefaultDNS
Name-Server 8.8.8.8
permit same-security-traffic intra-interface
network of the NETWORK_OBJ_10.100.1.0_26 object
255.255.255.192 subnet 10.100.1.0
network of the NETWORK_OBJ_10.2.1.192_26 object
255.255.255.192 subnet 10.2.1.192
network of the NETWORK_OBJ_10.13.0.0 object
Home 10.13.0.0
network of the NETWORK_OBJ_10.2.0.0 object
host 10.2.0.0
network of the NETWORK_OBJ_10.3.0.0 object
Home 10.3.0.0
the DM_INLINE_NETWORK_1 object-group network
host object-network 10.2.0.0
object-network 10.60.1.0 255.255.255.0
inside_access_in list extended access permitted ip any4 any4
inside_access_in list of allowed ip extended access all 10.60.1.0 255.255.255.0
outside_access_in list extended access permitted ip any4 any4
allow global_access to access extensive ip list a whole
DMZ_access_in of access allowed any ip an extended list
DMZ_access_in list extended access permit ip any interface inside
outside_cryptomap list extended access allowed host ip DM_INLINE_NETWORK_1 10.3.0.0 object-group
permit access ip host 10.2.0.0 extended list outside_cryptomap_1 10.11.0.0
pager lines 24
Enable logging
asdm of logging of information
Outside 1500 MTU
Within 1500 MTU
management of MTU 1500
MTU 1500 DMZ
ICMP unreachable rate-limit 1 burst-size 1
ICMP allow any inside
ICMP allow any response echo inside
ICMP allow any echo inside
ICMP allow all DMZ
ICMP allow any echo DMZ
ICMP allow any response to echo DMZ
don't allow no asdm history
ARP timeout 14400
no permit-nonconnected arp
NAT (inside, outside) static source any any static destination NETWORK_OBJ_10.2.1.192_26 NETWORK_OBJ_10.2.1.192_26 non-proxy-arp-search to itinerary
NAT (inside, outside) static source any any static destination NETWORK_OBJ_10.100.1.0_26 NETWORK_OBJ_10.100.1.0_26 non-proxy-arp-search to itinerary
NAT (inside DMZ) static source a whole
NAT (inside, outside) static source NETWORK_OBJ_10.2.0.0 NETWORK_OBJ_10.2.0.0 NETWORK_OBJ_10.13.0.0 NETWORK_OBJ_10.13.0.0 non-proxy-arp-search of route static destination
NAT (inside, outside) static source DM_INLINE_NETWORK_1 DM_INLINE_NETWORK_1 NETWORK_OBJ_10.3.0.0 NETWORK_OBJ_10.3.0.0 non-proxy-arp-search of route static destination
!
NAT source auto after (indoor, outdoor) dynamic one interface
Access-group outside_access_in in interface outside
inside_access_in access to the interface inside group
Access-group DMZ_access_in in DMZ interface
Access-Group global global_access
Route outside 0.0.0.0 0.0.0.0 168.187.199.65 1
Route DMZ 10.1.0.0 255.255.0.0 10.60.1.1 1
Route DMZ 10.2.0.0 255.255.0.0 10.60.1.1 1
Route DMZ 10.60.0.0 255.255.0.0 10.60.1.1 1
Timeout xlate 03:00
Pat-xlate timeout 0:00:30
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
identity of the user by default-domain LOCAL
AAA authentication LOCAL telnet console
the ssh LOCAL console AAA authentication
Enable http server
http 192.168.1.0 255.255.255.0 management
http 10.0.0.0 255.0.0.0 inside
http 0.0.0.0 0.0.0.0 outdoors
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown warmstart of cold start
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA-TRANS-aes - esp esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-TRANS-aes - esp esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-AES-128-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA-TRANS esp-aes-192 esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-AES-192-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5-TRANS esp-aes-192 esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-AES-192-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA-TRANS esp-aes-256 esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-AES-256-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5-TRANS esp-aes-256 esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-AES-256-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-3DES-SHA-TRANS esp-3des esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-TRANS esp-3des esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-3DES-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-DES-SHA-TRANS esp - esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-DES-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-DES-MD5-TRANS esp - esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-DES-MD5-TRANS mode transit
Crypto ipsec ikev2 ipsec-proposal OF
encryption protocol esp
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 proposal ipsec 3DES
Esp 3des encryption protocol
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 ipsec-proposal AES
Esp aes encryption protocol
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 ipsec-proposal AES192
Protocol esp encryption aes-192
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 AES256 ipsec-proposal
Protocol esp encryption aes-256
Esp integrity sha - 1, md5 Protocol
Crypto ipsec pmtu aging infinite - the security association
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
card crypto outside_map 1 match address outside_cryptomap
card crypto outside_map 1 set pfs Group1
peer set card crypto outside_map 1 196.219.202.197
card crypto outside_map 1 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
card crypto outside_map 2 match address outside_cryptomap_1
peer set card crypto outside_map 2 185.52.118.67
card crypto outside_map 2 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
outside_map interface card crypto outside
Crypto ca trustpoint _SmartCallHome_ServerCA
Configure CRL
trustpool crypto ca policy
Crypto ca certificate chain _SmartCallHome_ServerCA
certificate ca 6ecc7aa5a7032009b8cebcf4e952d491
308204 4 a0030201 d 308205ec 0202106e cc7aa5a7 032009b 8 cebcf4e9 52d 49130
010105 05003081 09060355 04061302 55533117 ca310b30 0d 864886f7 0d06092a
30150603 55040 has 13 0e566572 69536967 6e2c2049 6e632e31 1f301d06 0355040b
13165665 72695369 676e2054 72757374 204e6574 776f726b 313 has 3038 06035504
0b 133128 63292032 30303620 56657269 5369676e 2c20496e 632e202d 20466f72
20617574 7a 656420 75736520 6f6e6c79 31453043 06035504 03133c 56 686f7269
65726953 69676e20 436c 6173 73203320 5075626c 69632050 72696 72792043 61 d
65727469 66696361 74696f6e 20417574 686f7269 7479202d 20473530 1e170d31
30303230 38303030 3030305a 170d 3230 30323037 32333539 35395a 30 81b5310b
30090603 55040613 02555331 17301506 0355040a 130e5665 72695369 676e2c20
496e632e 311f301d 06035504 0b 131656 65726953 69676e20 54727573 74204e65
74776f72 6b313b30 5465726d 20757365 20617420 73206f66 39060355 040b 1332
68747470 7777772e 733a2f2f 76657269 7369676e 2e636f6d 2f727061 20286329
302d 0603 55040313 26566572 69536967 61737320 33205365 6e20436c 3130312f
63757265 20536572 76657220 20473330 82012230 0d06092a 864886f7 4341202d
010101 05000382 010f0030 82010 0d has 02 b187841f 82010100 c20c45f5 bcab2597
a7ada23e 9cbaf6c1 39b88bca c2ac56c6 e5bb658e 444f4dce 6fed094a d4af4e10
9c688b2e 957b899b 13cae234 34c1f35b f3497b62 d188786c 83488174 0253f9bc
7f432657 5833833b 330a17b0 d04e9124 ad867d64 12dc744a 34a11d0a ea961d0b
15fca34b 3bce6388 d0f82d0c 948610ca b69a3dca eb379c00 48358629 5078e845
1941 4ff595ec 7b98d4c4 71b350be 28b38fa0 b9539cf5 ca2c23a9 fd1406e8 63cd
18b49ae8 3c6e81fd e4cd3536 b351d369 ec12ba56 6e6f9b57 c58b14e7 0ec79ced
4a546ac9 4dc5bf11 b1ae1c67 81cb4455 33997f24 9b3f5345 7f861af3 3cfa6d7f
81f5b84a d3f58537 1cb5a6d0 09e4187b 384efa0f 01 has 38201 02030100 df308201
082b 0601 05050701 01042830 26302406 082 b 0601 db303406 05050730 01861868
7474703a 2f2f6f63 73702e76 65726973 69676e2e 636f6d30 12060355 1 d 130101
ff040830 02010030 70060355 b 200469 30673065 060, 6086 480186f8 1 d 060101ff
45010717 03305630 2806082b 06010505 07020116 1 c 687474 70733a2f 2f777777
2e766572 69736967 6e2e636f 6d2f6370 73302 has 06 082 b 0601 05050702 02301e1a
1 c 687474 70733a2f 2f777777 2e766572 69736967 6e2e636f 6d2f7270 61303406
03551d1f 042d302b 3029 has 027 a0258623 68747470 3a2f2f63 726c2e76 65726973
69676e2e 636f6d2f 2d67352e 70636133 63726c 30 0e060355 1d0f0101 ff040403
02010630 6d06082b 06010505 07010c 59305730 55160969 5da05b30 04 61305fa1
6 d 616765 2f676966 3021301f 2b0e0302 30070605 1a04148f e5d31a86 ac8d8e6b
c3cf806a d448182c 7b192e30 25162368 7474703a 2f2f6c6f 676f2e76 65726973
69676e2e 636f6d2f 76736c6f 676f2e67 69663028 0603551d 11042130 1fa41d30
1 b 311930 17060355 04031310 56657269 5369676e 4d504b49 2d322d36 301D 0603
445 1653 44c1827e 1d20ab25 f40163d8 be79a530 1f060355 c 1604140d 551d0e04
1 230418 30168014 7fd365a7 c2ddecbb f03009f3 4339fa02 af333133 300 d 0609 d
2a 864886 05050003 82010100 0c8324ef ddc30cd9 589cfe36 b6eb8a80 f70d0101
4bd1a3f7 9df3cc53 ef829ea3 a1e697c1 589d756c e01d1b4c fad1c12d 05c0ea6e
b2227055 d9203340 3307c 265 83fa8f43 379bea0e 9a6c70ee f69c803b d937f47a
99 c 71928 8705 404167d 1 273aeddc 866d 24f78526 a2bed877 7d494aca 6decd018
481d22cd 0b0b8bbc f4b17bfd b499a8e9 762ae11a 2d876e74 d388dd1e 22c6df16
b62b8214 0a945cf2 50ecafce ff62370d ad65d306 4153ed02 14c8b558 28a1ace0
5becb37f 954afb03 c8ad26db e6667812 4ad99f42 fbe198e6 42839b8f 8f6724e8
6119b5dd cdb50b26 058ec36e c4c875b8 46cfe218 065ea9ae a8819a47 16de0c28
6c2527b9 deb78458 c61f381e a4c4cb66
quit smoking
IKEv2 crypto policy 1
aes-256 encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 10
aes-192 encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 20
aes encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 30
3des encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 40
the Encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
Crypto ikev2 allow outside
Crypto ikev1 allow outside
IKEv1 crypto policy 10
authentication crack
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 20
authentication rsa - sig
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 30
preshared authentication
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 40
authentication crack
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 50
authentication rsa - sig
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 60
preshared authentication
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 70
authentication crack
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 80
authentication rsa - sig
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 90
preshared authentication
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 100
authentication crack
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 110
authentication rsa - sig
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 120
preshared authentication
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 130
authentication crack
the Encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 140
authentication rsa - sig
the Encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 150
preshared authentication
the Encryption
sha hash
Group 2
life 86400
Telnet 0.0.0.0 0.0.0.0 outdoors
Telnet 10.0.0.0 255.0.0.0 inside
Telnet 10.2.0.0 255.255.0.0 inside
Telnet 10.1.0.0 255.255.0.0 inside
Telnet timeout 5
SSH 0.0.0.0 0.0.0.0 outdoors
SSH 10.0.0.0 255.0.0.0 inside
SSH 10.2.0.0 255.255.0.0 inside
SSH 10.1.0.0 255.255.0.0 inside
SSH timeout 5
SSH group dh-Group1-sha1 key exchange
Console timeout 0
management of 192.168.1.2 - dhcpd address 192.168.1.254
enable dhcpd management
!
a basic threat threat detection
statistical threat detection port
Statistical threat detection Protocol
Statistics-list of access threat detection
a statistical threat detection tcp-interception rate-interval 30 burst-400-rate average rate 200
internal GroupPolicy_185.52.118.67 group strategy
attributes of Group Policy GroupPolicy_185.52.118.67
Ikev1 VPN-tunnel-Protocol
internal GroupPolicy_196.219.202.197 group strategy
attributes of Group Policy GroupPolicy_196.219.202.197
Ikev1 VPN-tunnel-Protocol
internal kecdr group policy
attributes of the strategy of group kecdr
value of server DNS 8.8.8.8
Ikev1 VPN-tunnel-Protocol
internal KECCISCO group policy
KECCISCO group policy attributes
value of server DNS 8.8.8.8
Ikev1 VPN-tunnel-Protocol
internal KECVPN group policy
KECVPN group policy attributes
value of server DNS 8.8.8.8
Ikev1 VPN-tunnel-Protocol
Split-tunnel-policy tunnelspecified
username, password admin eY/fQXw7Ure8Qrz7 encrypted privilege 15
cisco 3USUcOPFUiMCO4Jk encrypted password username
username privilege 15 encrypted password 3ofqMXhysxFRHhoQ keccisco
type tunnel-group kecdr remote access
tunnel-group kecdr General-attributes
address kecdr pool
Group Policy - by default-kecdr
kecdr group of tunnel ipsec-attributes
IKEv1 pre-shared-key *.
type tunnel-group KECVPN remote access
attributes global-tunnel-group KECVPN
address kecdr pool
Group Policy - by default-KECVPN
IPSec-attributes tunnel-group KECVPN
IKEv1 pre-shared-key *.
type tunnel-group KECCISCO remote access
attributes global-tunnel-group KECCISCO
address KECVPN pool
Group Policy - by default-KECCISCO
IPSec-attributes tunnel-group KECCISCO
IKEv1 pre-shared-key *.
tunnel-group 196.219.202.197 type ipsec-l2l
tunnel-group 196.219.202.197 General-attributes
Group - default policy - GroupPolicy_196.219.202.197
IPSec-attributes tunnel-group 196.219.202.197
IKEv1 pre-shared-key *.
remote control-IKEv2 pre-shared-key authentication *.
pre-shared-key authentication local IKEv2 *.
tunnel-group 185.52.118.67 type ipsec-l2l
tunnel-group 185.52.118.67 General-attributes
Group - default policy - GroupPolicy_185.52.118.67
IPSec-attributes tunnel-group 185.52.118.67
IKEv1 pre-shared-key *.
remote control-IKEv2 pre-shared-key authentication *.
pre-shared-key authentication local IKEv2 *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
!
global service-policy global_policy
context of prompt hostname
anonymous reporting remote call
HPM topN enable
Cryptochecksum:8156993fef96da73dedfaacd7a14e767
: endMy local IP address: 10.2.X.X
My remote IP address: 10.3.X.X
Can anyone support me for the error
Hello
Your self after dynamic PAT takes the static NAT...
NAT source auto after (indoor, outdoor) dynamic one interface
You must reconfigure you NAT or PAT rule defined in your firewall.
no nat source auto after (indoor, outdoor) dynamic one interface
network local-lan-pat1 object
10.2.0.0 subnet 255.255.255.0
NAT dynamic interface (indoor, outdoor)
!
network local-lan-pat2 object
10.60.1.0 subnet 255.255.255.0
NAT dynamic interface (indoor, outdoor)
!
no nat source (indoor, outdoor) public static DM_INLINE_NETWORK_1 DM_INLINE_NETWORK_1 NETWORK_OBJ_10.3.0.0 NETWORK_OBJ_10.3.0.0 non-proxy-arp-search of route static destination
!outside_cryptomap to access extended list ip 10.2.0.0 allow 255.255.255.0 host 10.3.0.0 255.255.255.0
No list of extended outside_cryptomap access not allowed host ip DM_INLINE_NETWORK_1 10.3.0.0 object-group
!
We hope that you do this between subnets... not for the host at the other end.
Concerning
Knockaert
-
I had found the Autofil area (don't remember not exactly where I found it) and must be entered my own information. But now when I go to the USPS website, it Autofils my own information in the TO: section. Even if I get information on and put in the correct information, when I click to go to the next screen, it won't move forward and goes back to tell me that there is an error on the page. I have already contacted their tech support, and they told me that this isn't a problem with their site. So it must be the autofil function which is ruin. But I can't understand how to return to the "authorized" State Thanks for any help in advance.
Firefox has never had a button to "auto form fill. You probably had an installed extension that provided this button. The add-on which cor-el mentioned is probably the best extension of Autofill currently available for Firefox.
Maybe you are looking for
-
NetRestore 10.11.4 and 10.11.5 Fail
I used successfully for a some years netrestore to deploy our macs. Since I improved the image of the master and the server at 10.11.4 the process fails. Experience teaches that usually it gets noticed and fixed. Unfortunately 10.11.5 always has the
-
How to add specific assistance to the vi's house or application independent labview?
Hi, I want to add Help for my application, build using labview. so that the application has become easy to use. in my application, there is one main VI and other 8-10 sup/sub-sub sub-sub VI. I want to place of the handling instructions and other help
-
I WAS ABLE TO DOWNLOAD FROSTWIRE, A P2P BITTORRENT/GNUTELLA CLIENT. BUT WEN I TRY TO INSTALL IT AN ERROR MESSAGE. SO, WHAT SHOULD I DO?
-
Activation of receptor 0xC004F074 error
Problems activating my windows 7 out of the blue. Please find the Diagnostic report (1.9.0027.0):-----------------------------------------Validation of Windows data--> Validation code: 0Code of Validation caching online: 0x0Windows product key: *-* -
-
my windows 7 pro is a download and it came with a product key that expired within 24 hours, my hard disk that uses the product key no longer works, my laptop hit the ground and destoryed, what can I do?