Need plug for optical drive - Matsu * a UJ - 831S

Similar Questions

• Need software for USB driver for JVC digital camcorder model GR-No.-D870AS with window xp

  Need software for USB driver for JVC digital camcorder model GR-No.-D870AS with window xp

  Hello

  I suggest to see the link and install the drivers and check.

  http://www3.jvckenwood.com/English/download/index.html

  I also suggest you contact the manufacture of the product and check.

  http://www3.jvckenwood.com/English/support/index.html

• Can cling to the blue SATA port on the Mobo for optical drive SATA HDD

  Studio XPS 435 t/9000 Office

  Service Tag:

  This box has the following motherboard in it.

  X501H Dell Studio XPS 9000 435 t LGA1366 Intel X 58 + ICH10R DDR3 motherboard series

  There are (5) SATA ports on the internal motherboard.

  
  SATA1, SATA2 - blue color Code, I (1) optical internal drive attached to the SATA1

  SATA3, SATA4, SATA5 - black color code, I (3) HARD drive connected 3,4,5

  The blue color SATA2 port is open

  Can I connect a 4th HDD SATA blue SATA2 port?

  Or are the blue SATA ports only for optical drives

  It will cause some problems if I hang a 4th HARD drive SATA2 port blue

  Hi rgadawg,.

  Welcome to the community.

  Blue SATA2 port must be compatible to connect to another hard drive. He should not ask any questions however, Studio XPS Installation Guide Page 57 under specifications says he has three bays for hard drives SATA 3.5 inch disk.

  http://Dell.to/YbYwib

  Thank you & best regards
  Mustapha S
  #iworkfordell

• COMPAC PRESARIO CQ61: Driver for OPTICAL DRIVE CD/DVD Presario cq61 laptop

  I could not download the driver for my CD/DVD optical drive on the HP site, message again me 'portlet is unavailable"- can someone send me a link to download the driver for my CD/DVD device.   When I go to 'my computer', the drive of the device does not - it seems to have disappeared just though I it didn't remove.  Run the diagnostics it tells me I need to download the driver for this device - hope someone guide me please on how I can do this.  Thank you

  Hello

  GoTo Sart > Control Panel > system > Device Manager > look down the list and find the CD/DVD drive, right click DVD/CD player and click on set to update driver, then choose to let Windows search for the driver and see if you can install it VIA Microsoft.

  Checkurtech

• need screws for hard drive for HP Envy Phoenix 800-060

  Where can I order some of these guide of cylinder head screws that you screw on the sides of a new drive, so it will slide along the rails and lock in place in the internal slots 3.5 "? No extra charges not supplied with my computer. I need to install 2 drives more then need 8 screws (4 screws by the reader).

  I called the computer of our local Mom & Pop shop and they offered to sell me a dozen screws for $1. I guess that's the only way. HP does not have.

• Need help for optical safety circuit.

  I buy these parts and prototype with real components, but since I multisim, I thought it would be nice to create the circuit and maybe work through issues I can practically.

  I need a circuit that takes 120 VCA, generates 5 VDC and 1.5Vdc power of optical transmitter and receiver.  I actually use a data port because he has great range and is pretty cheap.  Rather than send the binary code well I just send a light stead that is broken or not broken through doors and windows in my house.  Then the receiver sees this as an entry and order a relay.

  I tried several voltage regulators that come with multisim, but I get an error of execution of my circuit.  Really I can't the 120 VAC to power levels necessary for the functioning of the optics.

  Otherwise I might want to run on a system 120Vdc with battery backup, so throw a 120Vdc up to 20 v DC switching power supply - but I have not found a SMP in the library which takes 120 as input and as output 20.

  Basic plan: 120VAC source-> transform to 24Vac-> Full bridge rectifier to ~ 20 v DC-> voltage capacitor filter on the input of two voltage regulators (1 to 5 VDC, 1 to 1.5Vdc) - then circuit since the two power supply of the transmitter and the receiver.

  I just need help for 5V and 1.5V, from there, I know that the real world circuit will work component tests already carried out.  Thanks for reading.

  I didn't Multism so I can't advise you on the compatible models. I ran the model on semiconductors with slight modifications of format on my SPICE simulator based on Berkeley Spice 3f5. I had to change the format of model resistance semiconductors appeal but has not changed any values.

  The output of your power supply circuit 3 (with 5 V, not the 1.5 V regulator regulator) was 4.99995 V.

  There are a few messages about changing templates published for compatibility Multisim woth. You can search those to see if there are any suggestions on what you'll need to fix in the model.

  Lynn

• Need help for my drive c:/directory of restoration after accidentally clicking on display the hidden files on my c: Program Files.

  Please help me to restore its original settings. I trieds a system restore which has been dated several hours before the event, but he was no help. Now it is a terrible mess, I can't find any of my files. I tried to remove a set of Origion through and the .xml file that I never found incidentally. And I thought that maybe it's a hidden file, so I decided to show the hidden files for 1 file but somehow he eventually go in the folder c: Program Files, and when he says that you want to show all hidden for this folder files I said yes. And then the team is down. I have no more recognizable files and filenames have changed not to mention there are now 1 folder with more than 10,000 files in there that I have no idea what to do with them. I can sometimes use the search engine on the start menu and locate the file I'm looking for, but if I try to go to the location of the file, it's just a mess when need me it I don't recognize anything that should be in this folder. So far it has not affected the performance of my computer just my ability to perfom tasks on my c: drive. If someone can tell me please how to restore to its correct state. I searched directory fixing programs watched through the forums watched even though windows has installed a magic button that would have but all the files in order and hide files that need to be hidden again. Help, please!

  P.S. If you need more information I'll glady it provide for anyone who is ready to help.

  Hey Bitterhouse,

  Check out this link, it should help you. If you can't make it work, please explain what was different in these steps on your system so that we can continue to help you.
  Thank you!
  Restore a previous version of the file

• 4415 proBook s: replacement of the optical drive - need a support and screw

  Hello

  I'm replacing an optical drive, reference 535816-001 for a 4415 s HP's Probook. I've lost the support that attaches to the rear of the optical drive, seen in Maintenance and Service of Guide on page 68 (http://h20628.www2.hp.com/km-ext/kmcsdirect/emr_na-c01918897-3.pdf). The HP parts store said that the replacement of optical discs does not understand the support. I also talked with HP Support, and after putting me on hold and check with their supervisor, said that there is no spare part for the optical drive carrier. Does anyone know of a place to buy a replacement media for optical drive 535816-001 part number that would be compatible with a 4415 s HP's Probook?

  I also need a Phillips PM2, 5 × 7.0 live which blocks the optical drive to the computer. I saw screw for sale online kits, but was not sure if someone knew a place where I could buy one.

  Thank you very much for the help.

  NuttySquirrel wrote:

  Hello

  I'm replacing an optical drive, reference 535816-001 for a 4415 s HP's Probook. I've lost the support that attaches to the rear of the optical drive, seen in Maintenance and Service of Guide on page 68 (http://h20628.www2.hp.com/km-ext/kmcsdirect/emr_na-c01918897-3.pdf). The HP parts store said that the replacement of optical discs does not understand the support. I also talked with HP Support, and after putting me on hold and check with their supervisor, said that there is no spare part for the optical drive carrier. Does anyone know of a place to buy a replacement media for optical drive 535816-001 part number that would be compatible with a 4415 s HP's Probook?

  I also need a Phillips PM2, 5 × 7.0 live which blocks the optical drive to the computer. I saw screw for sale online kits, but was not sure if someone knew a place where I could buy one.

  Thank you very much for the help.

  Wait, I don't understand it how can you lose this part if you already work on it? And for your parts, you should look on eBay if they have this hardware and screws for your car as well.

• El Capitan grateful suddenly don't no optical drive

  I have a MacBook Air running El Capitan, purchased 3/2016. I bought the optical drive when I bought the computer. I used the external drive to burn DVDs and CDs. Everything worked fine until I plugged the optical drive yesterday. I opened iTunes, plugged the disc inserted a cd and the window showing that I inserted the cd never popped up. The finder does not display the drive, even though I checked in preferences to show him. The only way I could safely remove the cd was going to disk utility where I could see the disc and the cd and eject it.

  I checked to make sure that the drive still works by inserting a DVD or CD in the optical drive. The two will play correctly, but I still have to go back into the disk utility to eject because the drive does not appear anywhere else.

  With iTunes running and the drive plugged with a blank CD inserted, the "playlist to burn to the disc" is grayed out, because the computer is not recognizing the drive.

  What can I do to get the computer/El Capitan to recognize the drive again?

  Reporting system shows the optical drive? Try the commands from the Terminal after the connection of an optical drive...

  drutil discinfo

  Supplier product Rev

  DVD-R MATSHITA UJ - 8À8 HB14

  Please insert a disc to get the disc info.

  drutil list

  Supplier product Rev Bus SupportLevel

  1 MATSHITA UJ - 8a8 HB14 Apple shipping ATAPI DVD-R

  drutil info

  Supplier product Rev

  DVD-R MATSHITA UJ - 8À8 HB14

  Interconnection: ATAPI

  SupportLevel: Apple expedition

  Memory cache: 1024 k

  Write: CD - R, - RW, BUFE, CDText, Test, IndexPts, ISRC

  Write: DVD - R, DL - R, - RW, + R, + R DL, + RW, BUFE, Test

  Strategies: CD - TAO, SAO - CD, CD - Raw, DVD - DAO

  With a disc in the drive, try drutil eject.

• Windows 7 sees not SATA optical drives

  My engraver of CD/DVD Lite-On (model No.: iHAS324-98Y) managed to install Windows 7 Ultimate 64 bit on my new custom PC.  A few days later, I installed ASUS BR - ROM (model No.: BC-08B81ST) and the two discs have been palying OK.  A week later, I installed recorders Blu - Ray LG (model No.: WH10LS30) without a hitch.

  A few days after that, as soon as I opened up Explorer to move the internal HHD to an external HARD drive files, I couldn't see any which icon for optical drives.  I thought I had the virus but utilities Norton scanned no virus trouble.  Then, I searched the internet for a solution but nothing help. If I delete the Upperfilters and Lowerfilters of CD-ROM/DVD-ROM readers reg Key {4D36E965-E325-11CE-BFC1-08002BE10318} optical drive icons came back, but Windows 7 does not start (or crashes) after that unless the previous setting is restored.

  After a few hours cause analysis I went through the root, I think that the update of Windows 7 has contributed to this problem because I remember once again the PC installed upgrading during the power down, optical drive icons in the Panel of the computer is gone.  Has no known members the same problem?  Any Member draws the same conclusion?

  Note: I have to contact the manufacturer of Lite-On and they told me the drive isn't compatible Windows 7, but a guard thing listen why it worked in the first place because I used it to install Windows 7 on my PC.  My ASUS models and LG was working after I installed them even if they do not have the Windows 7 compatibility logo.

  What I did:

  (1) Re0installed Windows 7 Ultimate.

  (2) re-installed all the software application.

  (3) I have not installed any Windows updates.

  Since then, al of my optical drives are working properly.

• Need new optical drive for my Satellite M30-344?

  Hello

  the original optical drive in my laptop no longer works.

  So I want to change it (CD - RW / DVD-ROM) in a new with DVD/CD-RW.
  I read, that the optical drive CLS or master/slave adjustment und normally with software, I can change that.

  Use adjustments CLS or master/slave and that drive a market adapts the SM30-344?

  THX and sry for my English

  Greetings

  BOA

  Portable players are always on the CSEL parameters. There are no jumpers to master or slave.
  But it true s not all slim drives are compatible with the Satellite M30 laptop.

  I found these compatible discs:

  Drive_ _Cd-RW/DVD-ROM
  * Matu * a * G8CC0001C210

  _DVD-R/RW_
  * Toshiba * SD-R6112

  Drive_ _DVD-Multi (DVD-RAM/R/RW, CD-R/RW)
  * TEAC * G8CC00013210
  * Matsu * a * G8CC00019210

  You can also contact the ASP in your country to ensure the compatibility of disks

• I need the part number of optical drive for my new Aspire E5-573-5653.

  I need the optical drive part number for my new Aspire E5-573-5653, I bought it for my son without realizing he did not have. I would buy it and install it. Thank you.

  I contacted Acer technician. I hope it can help you (not the same Department).

  I understand your frustration... we don't have this problem in Europe.

  I'm not an employee of Acer. I'm just a volunteer / member.

• Need of optical drive for a 3490CT

  Hello
  simple (?) Question:
  I have a Portege 3490 CT (with Portreplikator) but no CD/DVD drive.

  Can I apply any optical drive that is marked as "Slim SelectBay" or do I have some special things (so far I found only one disc with SelectBay, but not specifically for TB of 3490...)?

  screws MFG

  Hello

  I think that there should be no problem to insert a Bay-select not in select drive bays in-Port Replicator.

• Need help finding a compatible optical drive for lenovo b50-80

  I ordered recently the b50-80 of lenovo laptop for my mother and I thought wrongly that it came with an optical drive. I tried searching online to see who can be compatible with it. But, I don't have a lot of experience actually shopping for one. The seller has recommended a couple, but I was also wondering if one of my old laptop drives would fit maybe? Focusing on internal versus external. All advice is appreciated!

  Hello.

  Welcome to the forums.

  If you want an external optical drive (CD/DVD/Bluray player) I'm pretty sure that any USB key will be compatible with your computer and Windows 7.

  I also checked onthe support for this model siteand searched the Manual of Maintenance to find an internal version of the DVD. I'm not complete of course know if, but if you check page 71 the #12 part seems to be the internal CD/DVD. It seems that FRU 25215832 is compatible with the B50-80. You should ask the price of this part (FRU) number and please confirm that this is the guy you want.

  And read the Maintenance Manual page #34 if you plan to install it yourself. Otherwise, you can always hire your local Service Center of Lenovo to get the part and install it for you.

  Concerning

  Concerning

• Can I use the SATA port connected to an optical drive to plug in a hard drive?

  I have a Pavilion e9270t desktop, Win7 Pro SP1, and I want to connect 3 HARD drive to the motherboard. Can I do this? Can I use the SATA port connected to an optical drive to plug in a hard drive?

  Thanks, CHemming

  CHemming,

  I've not seen UEIF support in the existing BIOS.

  If your demand on a 3T led, re - consider a maximum of 2 T.

  If you ask to have 3 hard disks, then you can do it without harassing the present cable of CD.

  The cage of your system hard disk will support 3 hard disks. Manual upgrade service

  All you need are the SATA data and power cables. Your Board has 4 SATA data ports.

  When you report back after inspecting your system for SATA power cables, I will move the cables and adapters, if necessary.