Need some basics on getting IT ID graphics

Similar Questions

• Need some tips to merge the two table-manipulation functions

  Hi guys!

  Thanks to Johnsold, Helmut O'Brian and Jcarmody, who helped me through a string function complicated (for me, the noob of LV), I got away with my project and I'm very close to its end.

  As I've described it here I wanted to explore an array of words combined with-, i.e. C1 - C10. Help, when I arrived, I was able to do. I also learned a few things and was able to do the following:

  Original array: new table:

  R1                                                       R1

  R2                                                       R2

  C1-C3                                                  C1

  K1                                                       C2

  C3

  K1

  I have this:

  Original array: new table:

  R1                                                       R1

  R2,R4,R7                                             R2

  C1                                                       R4

  K1                                                       R7

  C1

  K1

  I was also able to combine these two functions

  Now, back to my problem.

  Until now, it was just a 1 d array that I worked with. In fact, it's a 2D array, I read a. CSV file:

  

  As you can see there are a few places where things is combined with either - or by commas. I need to widen the first column as described above and as resolved in the thread I mentioned. Fact! No problem. I extracted the first column in table 1 d. Then expand it. Now, I need to replace in the original array and also expand all.

  It should then look like this:

  

  Then I only need to copy the position of the R6 line and paste it in the empty fields:

  

  I enclose below two screws. Start by opening the main.vi. Then copy.vi. I tried to describe the problem here too. You can see what I've accomplished and what is missing.

  Tasks:

  1. replace the column expanded in the original array and expand all.

  2 copy the needed lines.

  In the main.vi, I do the 1 d expansion, but I have the problem with the expansion of table 2D. In copy.vi, I managed to copy the lines. If this part is done.

  Basically, I need some advice on enlargement that I do and how do I get the 2D table also expanded. Because I have not much experience, I feel more comfortable working with 1 d arrays. But I can't seem to get any further with this 1 d-> expansion 2D.

  I also really can't seem to find a smart way to implement my function of copy-line-in the main.vi.

  P.S the joint screws are manufactured in LV2010.

  Fortunately, I can attend some courses of basic home OR here in Norway, but so far, I'm still learning and I think that sometimes, I try to do things that are way out of my League

  I don't know what I did but it works now

  Thanks for the help, same!

  You are even welcome!

  

  Have attached the file if anyone wants to see what I did.

• I'm doing a script that takes a list of e-mail from a text file and then allow me to select a save as a string. I found some ways to get the path of the file, but I'm in check by pulling the list

  I found some ways to get the path of the file, but I am defeated by pulling the list from that. the function of the path get gives me the path as "Macintosh Users:: Documents: extractedb.txt (myUsername).

  What I can't understand is how to get a dialog box to display a list that represents the content in the text file, I need to change the contents of the text file, I need the box to show me what I chose and I want to save my selection as a single string.
  e '.

  example of extractedb.txt information:

  [email protected]

  [email protected]

  [email protected]

  * has a random number of emails as well *.

  I want this is to pull those emails from the text file and turn them into a list so I can get to be a selection in my dialog box.

  Any help would be great = D

  Assuming you have a text file with your example e-mail addresses, the following AppleScript will read this file in a list (mf_List) and then use this list as input to choose among the list. Because multiple selection is allowed (control button), the output is sent to a list (sel_addr). We check if the Cancel button was pressed by testing for false and if this condition is met, we the script error.  Based on a single or multiple list item content of the list, display accordingly.

  game of mf to ((path to the folder as text) & "mail_list.txt")

  the value mf_List to {}

  the value sel_addr to {}

  the value mf_List to paragraphs of (read file mf)

  the value sel_addr to (choose from the list mf_List with title ¬

  ('Mail list' with multiple selections allowed without empty selection allowed)

  If sel_addr is equal to false then

  Error number-128

  return

  end if

  If length of sel_addr is equal to 1 then

  sel_addr display dialog box as text

  on the other

  the value Point to the text of TID to AppleScript delimiters

  the value Point text in AppleScript return delimiters

  display the dialog box elements of sel_addr in the text

  the value Text of point AppleScript delimiters to TID

  end if

  return

• I have a macbook pro: 2.3 GHz Intel Core i5, 4 GB of 1333 MHz DDR3 Ram. 10.7.5 version. When I open some websites, I get a message that web browser is obsolete. I use safari. When I do a software update, it says that the software is up-to-date. Help, plea

  I have a macbook pro: 2.3 GHz Intel Core i5, 4 GB of 1333 MHz DDR3 Ram. 10.7.5 version. When I open some websites, I get a message that web browser is obsolete. I use safari. When I do a software update, it says that the software is up-to-date. Help, please.

  Safari maxes in a version of Mac OS x.  New version of Mac OS x would be needed for the new version of Safari.

  Firefox is not limited within an OSX and probably has a version that works.  Chrome may as well but is a Devourer of resources.  Opera is a third option.

• Need some information on line input/output

  Hello

  I was recording the last week of the music we played ourselves using the output of an amplifier.
  Someone noticed however, the output of this output is in the rank of milli-volts, while the line-in input of my poor laptop is more micro -v.
  Now, I'm looking for confirmation and if possible, a solution for the music of this release in my laptop.
  Also, I would like to know the technical characteristics of the line and microphone input.

  Thanks in advance!

  Hello

  I can't answer about the specifications of the ports unfortunately but I can share some experiences on the line-in input on a Toshiba computer.
  The model I have a "combined" Line-In / Mic in. Officially, it's only a mic in but works fine online.
  What needs to be taken care of, is that the sensitivity must be set almost to 0. It takes some fiddling to get the right level but finally I got it and now use it to record programs from radio for a couple of years.

  Hope this helps

  BR

  Tom

• Need some clarification for upgrade

  Experts in the morning,

  I need some references for the process to upgrade between 10 and 11 g.

  I always use DBUA to update our database.

  
  

  For most administrators recommend NOT following options. I am confused.

  Experts, please guide me to travel in the right direction.
  

  > > Is this really necessary until the upgrade process, which is the real benefit?

  SQL > exec DBMS_STATS. GATHER_DICTIONARY_STATS;

  
  

  > > To activate my database in NOARCHIVELOG MODE, it provides massive difference during the upgrade process?

  SQL > alter the noarchive base newspaper;

  
  

  > > TRUNCATE table audit SYS. AUD$

  SQL > truncate table SYS. Storage of AUD$ drop;

  
  

  > > Depends on length process,.

  Size of the database

  Number of synonyms

  Number of data files

  Size of the recovery logs

  Number of installed components

  For the types of data and not the XDB user objects.

  > > Deletion of FILES NETWORK completely from 10 g $ORACLE_HOME, creating newfiles in 11 g $ORACLE_HOME

  
  

  $ rm - rf tnsnames.ora

  $ rm - rf listener.ora

  
  

  Thanks in advance.

  Hello

  > Is this really necessary until the upgrade process, which is the real benefit?

  SQL > exec DBMS_STATS. GATHER_DICTIONARY_STATS;

  1 prior to advantage, was causing problem - degrade the performance of your database? What its not beneficial?

  Logically, if you see the dictionary is on your information about your database - default provided with products and items of custom applications. Now during the upgrade - given that the term refers to a new addition of things monofores or gout or new table segmetns is getting added to your existing dictionary. Now, if I don't keep his stats up to date on my dictionary itself then update itself is the process of taking time. It will hit my sqls himself upgrade performance

  Thus, in order to reduce this impact - prior to your downtime in pre-upgrade task you can collect stats on your dictionary. While during upgrade if you run / run research in its stats its would take very little time to collect minor statistics and it will not affect the order of execution of ddl or dml SQL out that focus on changes in your dictionary.

  > To activate my database in NOARCHIVELOG MODE, it provides massive difference during the upgrade process?

  SQL > alter the noarchive base newspaper;

  2. I don't know who s/n, suggested the above step to achieve. Not a good, better I would have fired the DBA immediately. Despite that I have perform the update level or no, keep you the database in log mode archive.

  To upgrade, its gives no performance improvement for your upgrade process. What is your intention on the upgrade?

  You want to run through the upgrade in 15 minutes? Listen you dictionary database or application objects develop the direcrtly would increase the upgrade. Is not all synonyms - maybe a few times - up to what the table - dictionary of data updated in upgrade tis - for example bitand 12 c on synonyms function table is changed, so his punches performance - it is not a must and was cause depends on the base of the environment for the environment. Reason for this how you store your environment that will reduce the burden of upgrading

  > TRUNCATE table audit SYS. AUD$

  3. I hope I answered this question is another thread

  > Length upgrade depends on.

  Size of the database

  Number of synonyms

  Number of data files

  Size of the recovery logs

  Number of installed components

  For the types of data and not the XDB user objects.

  It is partially dependent on the data dictionary and how clean it is, whatever. Clean - number sense of invalids and statistics.

  Number of components installed in a concern - it might be a minimum until we reached and deliver the bad SQL with performance.

  Size of database and data file and restore logs is out of reach... If my database is to have 10 k datafles, my upgrade script will go and touch all the header files of data blocks, is indicated in MOS linsks or docs. No, he will not be at level of offers to work on something of dictionary and Oracle database metadata.

  > Deleting FILES of network completely from 10 g $ORACLE_HOME, creating newfiles in 11 g $ORACLE_HOME

  You have any load 2 mins to copy files during upgrade spending. Fact the DBA is so busy that he can afford 2 mins tasks.

  It is out of reach, you have to manage.

  -Pavan Kumar N

• I need some information on the new iMessage on ox10

  I need some information about the new features on I update to iOS 10 message

  Howdy iotti!

  I understand you want to learn more about iMessage on iOS 10. There are a few new features!

  See these pages for a quick look on the update options:

  Use effects of message with iMessage on your iPhone, iPad and iPod touch
  Use iMessage apps on your iPhone, iPad and iPod touch
  Use #images with Messages in iOS 10

  If you have a question about a specific feature, you are in the right place to help! Don't forget to reply to this topic with specific questions.

  Take care!

• Hey, need help. I get this in my iPhone that 'there is a problem of billing with a previous purchase. Please update your payment method"in any way I can remove my visa card from iTunes

  Hey, need help. I get this in my iPhone that 'there is a problem of billing with a previous purchase. Please update your payment method"anyway I can remove my visa card from iTunes?

  You must pay your debt first.

• I nned to know the procedure I use to get can Mac 2008 Desk top that will not start. I don't know how to connect two computers, my portable Mac Air 2013 on my desk, now I need to know how get the workstation files in order to appear on my mac air so I can

  Does anyone know how after I connect to my office 2008 Mac (which will not start.) to my computer laptop (2013 Mac Air). What are the steps that I need to know to get the Desktop files is displayed on my mac air so I can copy files to your laptop, especially my Itunes folder.

  Thanks Jerri

  If you can't get the iMac began and ongoing implementation, you will not be able to use the target disk Mode:

  https://support.Apple.com/en-us/HT201462

  Then the option is to take the iMac HARD drive, install it in an enclosed, and connect the HARD drive to the MBA via the USB port.  If the HARD drive is recognized, you can copy the data out of it.

  Ciao.

• Satellite Pro L10: where can I get a better graphics card

  Hey

  I have a Toshiba Satellite Pro L10 and I was wondering if and where can I get a better graphics card for it?

  Thank you very much

  Sorry Michael, but it has nothing to do because the graphics card can not be upgraded. Unfortunately the L10's small budget machine, and because of this, there is no better card inside.

  Good bye

• Get a new graphics card for the HP Envy 700-214

  Hello

  So I tried to get a new graphics card for my HP Envy 700-214, but I'm not aware if this map is compatible or if it would have a negative impact on my system.

  http://www.GeForce.com/hardware/desktop-GPUs/GeForce-GTX-750-TI/specifications

  I don't want my system to be harmed in any way.  Here is the link to the computer.

  http://support.HP.com/us-en/document/c04100558

  Thank you!

  Wolfking98, welcome to the forum.

  Here is the video card manufactured by EVGA.  It shouldn't harm your system somehow.  However, if you have trouble with the installation, you can contact their Technical Support (1-888-880-3842) or online.  They were very useful for me.  Read the reviews to see what users have to say about it.  As you can see, there are a lot of comments and appreciation 5 eggs.  You can't do better.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• Satellite C660 - need some for my MK3275GSX HARD disk diagnostic utilities

  Hello

  I need some diagnostic utilities for * MK3275GSX * hdd.

  For example * mhdd tool ([link | http://www.hddguru.com/software/2005.10.02-MHDD/]) would be enough for me, but I can not use because in some reason intel card mother block hard drive and I have an error: _Drive don't ready_.

  I find that: [link: http://storage.toshiba.com/storage-services-support/warranty-support/software-utilities], but I don't know what exactly I can use with my hard drive.

  Can I use [this | http://storage.toshiba.com/storage-services-support/warranty-support/software-utilities#erase] utility for my drive?

  Any suggestions?

  Post edited by: richman

  Hello

  What you think him * Drive Fitness Test utility? *
  It s a freeware software means you can use it for free and it helps you to scan the HARD drive for problems.

  Google for Drive Fitness Test, you can download this tool from different pages.

• Pogo says I need internet explore to get pogo free bookworm and I have internet explore need to I do

  Pogo says I need internet explore to get pogo free bookworm and I have internet explore need to I do

  Hi karenjohnson1953,
   
  Thanks for visiting the site of Microsoft Windows Vista Community!

  (a) probably you are unable to download from the site, there might be a problem with the site itself.

  (b) you should maybe download and install the latest version of Flash Player

  (c) temporarily disable all security software and ensure

  If it fails,
   
  You can do the following to narrow down on the issue
   
  Follow the steps and check if this aid since modules might also be a reason for Images are not displayed.
   
  Menu Tools-> Manage Add-ons and disable unnecessary features.
   
  You can optimize Internet Explorer
   
  Follow the link to learn more about Internet optimization below:
  http://support.Microsoft.com/default.aspx/KB/936213

  You can reset Internet Explorer to default settings.
  Follow the link to reset Internet explorer 8: http://windows.microsoft.com/en-us/windows-vista/Reset-Internet-Explorer-8-settings

  Hope this information helps
   
  Thank you, and in what concerns:
  Aziz Nadeem - Microsoft technical support.
  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• HP 15-r045sr: need some drivers for HP 15-r045sr

  Hello.

  Please, help me, I need some drivers.

  Network controller

  PCI\VEN_1814 & DEV_3290 & SUBSYS_18EC103C & REV_00
  PCI\VEN_1814 & DEV_3290 & SUBSYS_18EC103C
  PCI\VEN_1814 & DEV_3290 & CC_028000
  PCI\VEN_1814 & DEV_3290 & CC_0280

  SM Bus controller

  PCI\VEN_8086 & DEV_0F12 & SUBSYS_2213103C & REV_0E
  PCI\VEN_8086 & DEV_0F12 & SUBSYS_2213103C
  PCI\VEN_8086 & DEV_0F12 & CC_0C0500
  PCI\VEN_8086 & DEV_0F12 & CC_0C05

  PCI device

  PCI\VEN_10EC & DEV_5229 & SUBSYS_2213103C & REV_01
  PCI\VEN_10EC & DEV_5229 & SUBSYS_2213103C
  PCI\VEN_10EC & DEV_5229 & CC_FF0000
  PCI\VEN_10EC & DEV_5229 & CC_FF00

  PCI encryption/decryption controller

  PCI\VEN_8086 & DEV_0F18 & SUBSYS_2213103C & REV_0E
  PCI\VEN_8086 & DEV_0F18 & SUBSYS_2213103C
  PCI\VEN_8086 & DEV_0F18 & CC_108000
  PCI\VEN_8086 & DEV_0F18 & CC_1080

  HP Truevision HD

  USB\VID_04F2 & PID_B40E & REV_6934 & MI_00
  USB\VID_04F2 & PID_B40E & MI_00

  AND (looks like it's my mouse)

  REV_0010 & USB\VID_13EE & PID_0001
  USB\VID_13EE & PID_0001

  You are the very welcome.

  So, I just owe you the pilot of the universal camera... back to the site, here it is...

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=6943827&swItemId=ob_141708_1&swEnvOid=4058

  You will also need the cyberlink youcam software...

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=6943827&swItemId=ob_133024_1&swEnvOid=4058

  You can try to uninstall the device mouse, reboot and see if it is properly installed.

• If I create a windows 10 dvd using media creation tool, I need to install to get the free offer before 7/29

  If I create a windows 10 dvd using media creation tool, I need to install to get the free offer before 7/29

  Before Hawaii 2359 time (GMT-10) July 29.