I have a macbook pro: 2.3 GHz Intel Core i5, 4 GB of 1333 MHz DDR3 Ram. 10.7.5 version. When I open some websites, I get a message that web browser is obsolete. I use safari. When I do a software update, it says that the software is up-to-date. Help, plea

Similar Questions

• I have a Macbook Pro (13 - inch, Mid 2012), processor 2.5 GHz Intel Core i5, memory 4 GB 1600 MHz DDR3 and the serial number C1MK12K6DTY3. On the Pages, Numbers and Keynote, y at - it any other way to get them for free?

  I have a Macbook Pro (13 - inch, Mid 2012), processor 2.5 GHz Intel Core i5, memory 4 GB 1600 MHz DDR3 and the serial number C1 * TY3. On the Pages, Numbers and Keynote, y at - it any other way to get them for free?

  < personal information under the direction of the host >

  Only when you buy a new Mac. Since the end of 2013 the app came with the purchase of a Mac.

• Is it possible to install CS5 or CS5.5 on a 2.4 GHz Intel Core 2 Duo 4 GB 667 Mhz DDR2 SDRAM MacBook

  Is it possible to install CS5 or CS5.5 on a 2.4 GHz Intel Core 2 Duo 4 GB 667 Mhz DDR2 SDRAM MacBook Pro 10.6 (Snow Leopard) running?

  Before posting my question, I checked the requirements of system/hardware for Creative Suite, as well on Internet Apple and Adobe sites. But however I'm confused about the difference between 'Processor Intel multicore' vs 'Core 2 Duo' and hearing stories CS5 works not properly in similar situations because of hardware problems.

  Hi LMDV,

  Welcome to the community!

  Intel multi-core processor, also known as the Dual core processor is required to run the CS5 or CS5.5, you have the Core 2 Duo which is better then Dual core and enough to run CS5 and CS5.5 applications. You just need to check the other requirements of system that is mentioned here:

  http://www.Adobe.com/store/en_US/popup/software/creativesuite/mastercollection5/systemreqs .html

  Thank you!

  Ankit

• When you access microsoft technical support, I get a message that the article applies to windows vista and head to the support of windows xp. However, I have installed professional vista

  Microsoft support see my installed OS windows XP. When, in fact, I have Vista for businesses. So that when I click on an article I get a message that the article does not apply to me and that I should see windows xp support

  If you don't mind, double check what Windows do you really.

  If you do not have Vista... Start > computer > toolbar, System Properties > what does say under Windows edition?

  t-4-2

• I have 5 Lightroom on a new Mac - I have the original label and the number of services.  When I try to enter, I get a message that the serial number is invalid.  What can I do

  I have 5 Lightroom on a new Mac - I have the original label and the number of services.  When I try to enter, I get a message that the serial number is invalid.  What can I do

  Thanks - Yes, it's the LR5.

  2 hours on the phone with Adobe technical support, it is fixed.

  I guess it was a mistake with the original installation.

• Habe Lightroom 6 CD Box und kann so are responsible nicht (I have Mac CD non one takes) "Ghz Intel Core i5 16 GB 1333 MHz DDR3 Startvolume SSD 16 GB ATI Radeon HD 5750 1024 MB.

  Habe Lightroom 6 CD Box und kann so are responsible nicht (I have Mac CD non one takes) "Ghz Intel Core i5 16 GB 1333 MHz DDR3 Startvolume SSD 16 GB ATI Radeon HD 5750 1024 MB.

  You can download LR 6.1 from the link below. Then confirm with the serial number of your drive.

  http://blogs.Adobe.com/lightroomjournal/2013/06/keeping-Lightroom-up-to-date.html#lrcc2015

• When I try to access one of my email accounts via the butterfly, I get a message that the password that I entered is incorrect.

  Sign of butterfly MSN problem

  When I try to access one of my email accounts via the butterfly, I get a message that the password that I entered is incorrect. When I try to change the password, I get the message I tried too many times changing the password and that I should wait and try again. I waited weeks and tried again and I have the same problem. What should do?

  Thank you very much

  Gary Jones

  Hello
   
  As the problem you are having is with MSN, it would be best to contact MSN support for assistance.
  Support MSN: https://support.MSN.com/default.aspx?&St=1&wfxredirect=1
   
  And also see the following Microsoft article.
  How to contact MSN customer service: http://support.microsoft.com/kb/940784
   
  Hope the information is useful.

• When I look for a file in Win Explorer, I get a list of files in the search results. But some of the files seem to be missing. I get a message that the directory is not found when I try to open the search results.

  I wonder if what's on my hard drive and if what Win Explorer is on my hard drive are two different things.

  If I do a search in Win Explorer to "purple", I get a number of results.
  (To search for a file, I am in the word "Purple" in the search field in the upper right Win Explorer and pressing the "Enter" button).

  There are a couple of JPG files that I wonder about the search results.
  One example is called "purple_flowers.jpg".
  When I double-click this file in the search results to open it, my paint program opens and gives me a message that the directory is not found. If I use MS Paint to try and open it by double-clicking on the file and selecting "open with...". MS Paint", I get a message that the directory is not valid.

  The location of the directory on the error message is the blue 'Images' folder for my user. But, when I opened this file, I don't have a file with that name in this directory. The same thing happens with another JPG file, called "octopus.jpg" when I search the word 'Octopus '.

  Is this something messed up between what I have on my hard drive and think what Win Explorer is on my hard drive?
  How can I fix?
  Something must be reset in Win Explorer?

  I could have the JPG files with these names at the same time. I had a large library of images for a project, but I deleted it.
  (I tried to turn on the option to show hidden files in this directory, but that did not help).

  Imane:

  I thank very you much for that answer.
  But it seems to have stumbled on the solution:

  Strangely, this worked:

  (Maybe you know why).

  I moved the files in my blue images folder in another folder, delete the folder images blue, emptied the Recycle Bin and rebooted my computer.
   
  When my computer has finished its startup routines, my folder of photos blue was there! And he had the shortcut to the folder 'Sample Pictures' inside.
   
  When I searched "the Octopus" and "purple", I no longer saw these JPG files in the search results.
   
  I don't really know what happened, but I thought that after these results just in case someone else knows this.

  I'll read and watch in your information. I don't want to know more about what is happening in my computer.

  Marz

• Classified into Acrobat Pro Tech Soup. Try to install, but get a message that the serial number is not valid?

  I ordered Acrobat Pro for Mac of Tech Soup. They sent a serial number, but when trying to install I get a message that the number is not valid?  How do I fix this?

  Thank you. I had entered the wrong serial number at first, but with successive tests (using the correct code) I kept getting the message invalid.

  I had to re-launch the installation from the beginning, and when you are prompted to enter the serial number began the installation process.

• I can not connect on my user profile who is also the administrator. I get a message that the password is incorrect, however I have not changed the password. s not now what it was

  I can't connect to my user profile who is also the administrator.  I get a message that the password is incorrect, however I have not changed the password. My 11 year old niece used the pc last (play online games) and I was informed that it was a download/installation, but do not now what it was. I can't download or update any information on the pc that this requires the admin password. I am currently using the guest account, that does not give me access to all programs and the pc is running a little slower than ususal. Your help with this questions is appreciated.

  the operating system is Windows Vista Home Basic 32-bit.

  Hello

  If your niece has changed the password, or you have a corrupted system, this Information Microsoft will help you.

  Here are the different circumstances where it can help you.

  You will need to borrow a Microsoft DVD from a friend, Recovery DVD a manufacturer without these special work options available.

  • http://support.Microsoft.com/kb/940765

  If you are unable to connect to Windows 7 or Windows Vista, you can use the Windows Vista System Restore feature, or the Windows 7 system restore feature.

  You may be unable to connect to Windows Vista or Windows 7 in the following scenarios:

  • Scenario 1: You recently set a new password for the protected administrator account. However, you don't remember the password.
  • Scenario 2: You type the correct password. However, Windows Vista or Windows 7 does not accept the password because the system is damaged.
  • Scenario 3: You delete a protected administrator account. Now, you cannot connect to another administrator account.
  • Scenario 4: You change an administrator account protected with a standard user account. Now, you cannot connect to another administrator account.

  And as you say that your niece may have downloaded something, that something could have been malicious, that can cause problems with password.

  Download, updatre and scan your system with Malwarebytes AntiMalware in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  And here's how to go in Safe Mode options; Select safe mode with networking from the list of options:

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  See you soon.

• When I try to run the MATS I get a message that the dll is missing

  Original title: you try to run Automated Troubleshooting

  When I try to run MATS, I get a message that the dll is missing.  How can I fix this?

  Hi bjacobs,

  1. what Microsoft Fixit you try to run?

  2. when the problem started?

  For more specialized issues of Fixit assistance, please post your request on the Microsoft Fix it Center

  Microsoft Fix it Center

  http://social.Microsoft.com/forums/en-us/fixitcenter/threads

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• When I update my Windows XP, I get a message that the 2 updates cannot be updated. Here is the error message

  When I put update of windows xp I receive message 2 updates cannot been done here is what I get = - other hardware - Microsoft HID Non-User Input data filter (KB 911895)
  -Other hardware - Microsoft HID Non - User Input data filter (KB 911895) CAN
  you help me? Thanks when I update my Windows XP, I get a message that the 2 updates cannot be updated.  Here is the Microsoft - other hardware - error message HID Non-User Input data filter (KB 911895)
  Microsoft - other hardware - HID Non-User Input data filter (KB 911895) can you please help me
  André

  Hi MrPeanut,

  Welcome to the Microsoft answers site.

  This problem can occur because the device sends data of strength of signal for Windows. These data can be interpreted as input device real, such as the movement of the mouse, button activity or strikes. Therefore, this transmission can prevent Windows mode 'sleep'. Windows must enter "sleep" mode to activate the screen saver.

  I suggest that you update the drivers for all devices on the computer entry. You can update the drivers from Device Manager and check.

  See the link for update drivers: update a hardware driver that is not working properly: http://windows.microsoft.com/en-us/windows7/Update-a-driver-for-hardware-that-isn ' t-work-good

  If the problem persists, then I suggest that you uninstall the update from Add/Remove programs in the control panel.

  Now, download you the link that resets the update reset Windows components from the following link: How to reset the Windows Update components?: http://support.microsoft.com/kb/971058

  Now start you the Windows updates and check.

  Swathi B - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• My Security Center is turned off and I can't turn it back on. When I click on the Tower on the box, I get a message that the Security Center service cannot be started?

  My Security Center is turned off and I can't turn it back on. When I click on the Tower on the box, I get a message that the Security Center service cannot be started? What makes me to start security do you recommend?

  My Security Center is turned off and I can't turn it back on. When I click on the Tower on the box, I get a message that the Security Center service cannot be started? What makes me to start security do you recommend?

  Start button > in the search box, type services > press the Enter key > uac prompt > scroll Security Center, click...
  topic status, it must be said... Has begun
  under Startup Type, it must be said... Automatic
  If it does not say this, do a RIGHT click on Security Center > in the new window, make the necessary changes...
  the startup type, click on the pointer, and then select Automatic (delayed start)
  the service status, click start
  Click OK when finished. For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• My iphone is no longer on my mac when I connect ny pluging it appears on my imac, and open itunes. I get a message that says I need to upgrade to the latest version of itunes. I have the latest version on my computer. Help

  When I open itunes, I can no longer be sunch my iPhone. I get a message that says that I need to update to the latest version of itunes. But I have the latest version of itunes on my imac.

  My mac running OS x 10.6.8

  My version of itunes is 11.4

  My iphone is running OS 9.3.2

  
  

  If I uninstall itunes and reinstall I lose all my data, applications, contacts, photos and songs?

  You need Cougar 10.8.5 or later version to run the latest version of iTunes which is 12.4.0.119

  That the iPhone will need iTunes 12.3.3 or higher

  You can download Mountain Lion here

  http://store.Apple.com/us/product/D6377Z/A/OS-x-mountain-lion

  Or you can update to El Capitan if your Mac is capable

  Support Apple OS X El Capitan - technical data -

  You did not provide the specs on Mac-

  See also this thread

  Re: How to restore iPad again when the message says need new itunes version

• I have a Macbook Pro mid 2012 edition, i7 and 8 GB (2 x 4 GB) of RAM DDR3 (1600 MHz). Can I add any RAM with this config?

  I want to upgrade my RAM 16 GB (2x8GB) and also to change the hard drive (750 GB) to a 250 GB SSD. I was going through the forum and people have posted that they have improved their RAM with no problems. I visited the local electronics market and is the knowledge that they have a Kingston 8 GB DDR3 1600 MHz RAM. I just want to know if it is safe to add that RAM for my MBP or not? One of my friends told me that the MBP requires a different sort of RAM so I am confused. In addition, I was intending to buy a single 8 GB and set up my MBP with 12 GB (8 + 4) RAM and then replace the other 4 GB with an 8 GB to make eventually 16GB. Will there be a problem with this approach? Also can I add any SSD fits laptops from my system? I found an SSD 240 GB (uv300) Kingston. Please suggest if I can add that.

  You can fit a maximum of 16 GB, if you choose compatible Ram.