Need to buy a cable from the console to a SRW248G4

Similar Questions

• Cable from the console to SRW2048

  I lost the cable to the original console to the Cisco Linksys SRW2048 and I was wondering if I can use the Cisco console cable or can a regular series with the female ends cable will work?

  Thank you

  Stanley

  Hello, Stanley.

  A cisco console cable probably will not work since they usually have a RJ-45 on one end.  However, a regular serial cable should work just fine, as long as your computer has one, or you have a USB serial adapter.

  The parameters for the console port are as follows:

  Bits per second: 38 400

  Data bits: 8

  Parity: None

  Stop bits: 1

  Flow control: no

  Once you open the connection, you will need to hit enter once something appears.

  You can also check this switch via telnet console, by connecting to the IP address of switches with a telnet client and use admin as user name with a blank password.

  I got most of this info to the Administrator's guide, which is available here:

  http://www.Cisco.com/en/us/docs/switches/LAN/CSBMs/SRW2048/Administration/Guide/SRW-US_v10_UG_A-Web.PDF

  Let me know if it works,

  Christopher Ebert

  Network support - Cisco Small Business Support Center Engineer

• Windows 7 - how the hdmi cable from the pc to the tv

  Original title: need help

  How does the cable from the PC to the tv hdmi

  Hi paulgibsonTF,

  The problem is that Windows developers are (I think) try to be too smart - if your computer doesn't have any HDMI cable plugged into it, and you do not have a HDMI device at the other end of the cable (like a TV or surround sound amplifier / speaker system), then Windows will simply ignore the Windows software for the HDMI driver is loaded.

  And even when you have a device HDMI plugged in and turned on, sometimes, Windows does not see that it is there. So don't mind allowing you to set the parameters of the device.

  Now... to begin the search. Go down on the status bar (this bar on the lower edge of the screen) system and find the sound icon - looks like a small speaker. Click on it and click playback devices. On my computer, I get a window ACOUSTICS, and it only shows a device (speakers / headphones).

  I don't have a connected HDMI device this time. But I do not have the device drivers loaded.

  Recently, I tried to plug in this same laptop to my TV HDMI, and... of course, Windows won't see HDMI devices are there and it is plugged. Once again.
  WHY? I do not know. But I had to pass by there is two years (even mobile) was about four cycles to uninstall the device HDMI driver, reinstall it, turn off things, disconnect, turn them, plug them,... and all of a sudden it started working.

  If Microsoft is still looking at this forum and answers other than "Windows 8", I'd love to hear them also!

  http://geekitdown.com/how-to-connect-Windows-7-laptops-to-TVs-using-HDMI/

  http://Windows.Microsoft.com/en-in/Windows7/connect-your-computer-to-a-TV

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/HDMI-sound-in-Device-Manager-but-does-not-show-up/3ef1505c-7116-441c-80f3-bf096ed1c2fb

  http://www.TomsHardware.com/Forum/324637-33-enable-HDMI-output-Windows

• I live in the United States and would like to buy a song from the Germany. Is this Possible?

  I live in the United States and would like to buy a song from the Germany. Is this possible?

  Hello

  You can buy songs that are available on iTunes Store for your country.

• Where to get the cable from the monitor to Satellite C660-1TK

  I have a portable satellite c660-1tk and I have problems with the monitor, it turns out that the problem is the cable from the monitor. I went everywhere looking for a monitor cable, but I couldn't find one.

  My question: where can I get one?

  I thought to order it online, but can't find anything.

  Hello

  You can order these parts of the Toshiba authorized service provider that is available in your country.

  Here is a list of all FSA available worldwide:
  http://www.Toshiba.EU/innovation/generic/ASP_SUPPORT/

  I put t think it should be a problem to get such cable.

• Upgrades - during the procedure, my PC says it is install updates - but after doing what he wonyt restart and I need to go to restart from the last successful to get windows to restart - ideas?

  Upgrades - during the procedure, my PC says it is install updates - but after having done this, she does not restart and I need to go to restart from the last successful to get windows to restart - ideas?

  Windows Update Forum:

  It's updated operating system Vista, upgraded installation and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• I need a PDF by email from the file and need to password protect the file. How to password protect the file?

  I need a PDF by email from the file and need to password protect the file. How to password protect the file?

  Hi olivera96817159,

  Password protect the PDF file, you must use Acrobat Pro DC, it is not possible with Reader app.

  Thank you

  Abhishek

• What I really need to buy more FEPs in the clowd to update my creative cloud, my free space I s complete, I am now froced to pay more to use my programs?

  What I really need to buy more FEPs in the clowd to update my creative cloud, my free space I s complete, I am now froced to pay more to use my programs?

  Hi TinEriksson,

  CC cloud offer free space 2 GB, but if you bought the subscription for one of the CC app you'll get 20 GB space cloud until you have the subscription.

  So, if you need more creative space Cloud you must subscribe.

  Kind regards

  Nicos

• Hello world! I'm french so if I speak wrong forgive me. For my work I need to buy adobe acrobat and the problem is I'll maybe change my computer, but not now. If I have installed adobe acrobat in my computer would it be possible to install the s

  Hello world! I'm french so if I speak wrong forgive me. For my work I need to buy adobe acrobat and the problem is I'll maybe change my computer, but not now. If I have installed adobe acrobat in my computer would it be possible to install the software in my future computer without purchasing another license that is to say with the same license that I bought?

  Yes, you can reinstall it on other machines, if you wish, without having to buy new.  A license allows for activating facilities on two machines and if necessary, you can turn off a machine in order to allow the activation of another.

• Satellite A300D-15B - where to buy the cable from the screen?

  Where can I buy a cable connection to the motherboard to the screen in the United Kingdom?

  Hey Buddy,

  Everything for your laptop, you can get a service authorized in the United Kingdom.

  If you don t have a phone number or e-mail address, here is a list of all the FSA:
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

• How to repair or replace the cable from the monitor on console 15fp

  We bought a KVM rack and keyboard with our Dell 4210 support about 2 years ago.  We have received "No Signal" for a while on the screen, and I finally had time to open the side of the basket and take a look.

  I see that the insulation of the monitor cable that is built into the console monitor was rubbed through and some of the money i wire mesh has been broken.  It is to the first bend of the cable guide and must have been rubbing.  I guess that's the cause of the error 'no signal '.

  I would like to replace the cable, but releasing the anchor on the middle of the back of the monitor seems impossible after removing all the hexagonal bolts around the perimeter.  I cut the label above the dimple found in the center of the screen back but found that there is not a fastener which can be manipulated.

  1. Is it possible to open this beast, if I can replace the cable?  I don't really have the budget for a new console.
  2. If it cannot be opened and closed and then after working on it, everyone is aware it is possible to connect with success a RGB cable?

  Thanks in advance for any advice on this.  Mike

  
  

• Need a cable from the screen for Satego P200-15U

  Hello all :)

  I want to order and replace a cable for my rather old laptop screen, but I don't know the part number.

  Someone has an idea of what might be the part number of this cable?
  The model number is PSPBBE - 005001GR.

  Thanks in advance

  Hello

  Get in touch with local Toshiba ASP (authorized service provider)
  The service partner must be able to provide a compatible cable.

  Here you will find all available worldwide FSA:
  http://www.Toshiba.EU/innovation/generic/ASP_SUPPORT/

• Need help with commands from the console.

  Guys,

  I'm discovering nuer console which is attached to a particular hba.  I have connected to the console and you have run the following command

  cat/proc/vmware/scsi/vmhba1

  It returns a message saying something like "this is a directory" now all I have is a blank screen with a blinking cursor and I can't go back to the root.  Can someone help me to pease keep in mind Im these commands do not at all know.

  Thank you.

  ... try with CTRL + C or ": q!"

  CAD commands reference

  Bye bye

• Can someone help with the problems of email account? Messages from the console?

  vcyman , March 9, 2016 13:16

  I had ongoing issues with my Mail months including Spindumps and just doesn't look good, so I changed the e-mail settings in the past according to the directives of the ISP, but now the incoming server is grayed out, more it's time to see if my overall situation needs some changes. As I am researching the current issue of the evolution of the e-mail settings, I see the information that can be linked to a larger problem, so I'm including that in a larger context.

  I use my Web site for most of my email accounts and received error messages indicating that the certificate is not valid. I contacted Hostway and learned that they have their own encryption and don't require SSL, but they said Apple mail works best if I use their specific settings instead of those I have. The server settings entering my accounts existing messaging site are shaded out and immutable. What is the best way to make changes without causing more problems?

  I tried to move the mail account plist.to the trash and restart hoping that would disable the accounts but it didi not work. Or I sign out to iCloud and make changes?

  MORE INFORMATION

  In/Library/Application Support / Mail / Online Account Types/com.apple.updated.mailaccounts/MailAccounts.plist, the Account.plist includes an e-mail account which is Ameritech and not logged into my site.

  in Library/Mail/it is V2 and V3. V2 is V2/MailData/Accounts.plist. V3 contains no Accounts.plist. in MailData. I printed the Accounts.plist. and there are 22 pages of data. Each e-mail account is repeated at least three times and it seems connected to the when I made changes to the account settings in the past.

  This may be related to a larger problem because I have error messages related to the e-mail in the console.

  09/03/16 12:05:22.644 PM cloudd [429]: error SecOSStatusWith:-[50] error Domain = NSOSStatusErrorDomain Code =-50 'query lack the class name' (paramErr: error in user parameter list) UserInfo = {NSDescription = query missing class name}

  09/03/16 12:05:22.648 PM DCs [365]: securityd_xpc_dictionary_handler cloudd [429] copy_matching error Domain = NSOSStatusErrorDomain Code =-50 'query lack the class name' (paramErr: error in user parameter list) UserInfo = {NSDescription = query missing class name}

  09/03/16 12:05:22.648 PM cloudd [429]: error SecOSStatusWith:-[50] error Domain = NSOSStatusErrorDomain Code =-50 'query lack the class name' (paramErr: error in user parameter list) UserInfo = {NSDescription = query missing class name}

  09/03/16 12:05:22.649 PM Mail [634]: cannot load the draft for documentID: C265D900-C6A3-48B9-AF60-C83FE29A7AED

  09/03/16 12:05:22.705 PM Mail [634]: cannot load the draft for documentID: E1D3029B-C2BF-425E-8F67-32C190B420CF

  09/03/16 12:05:23.142 PM Mail [634]: CFNetwork SSLHandshake failed (-9807)

  09/03/16 12:05:23.144 PM Mail [634]: CFNetwork SSLHandshake failed (-9807)

  09/03/16 12:05:23.417 PM Mail [634]: CFNetwork SSLHandshake failed (-9807)

  09/03/16 com.apple.AddressBook.InternetAccountsBridge [501 12:05:23.432 PM]: looking for iCDP status IDDM 61149625 (checkWithServer = 0)

  09/03/16 com.apple.AddressBook.InternetAccountsBridge [501 12:05:23.435 PM]: error XPC while checking if iCDP is enabled for IDDM 61149625: error Domain = NSCocoaErrorDomain Code = 4099 "the connection to the service named com.apple.cdp.daemon was invalid." UserInfo = {NSDebugDescription = the connection to the service named com.apple.cdp.daemon has been invalidated.}

  09/03/16 com.apple.AddressBook.InternetAccountsBridge [501 12:05:23.435 PM]: connection Daemon invalidated!

  09/03/16 com.apple.AddressBook.InternetAccountsBridge [501 12:05:23.436 PM]: [AOSAccounts]: [__49-[ACAccountStore (iCloudAccount) icaAppleAccounts] _block_invoke]: accountsWithAccountType returned the error: Domain = com.apple.accounts error Code = 9 '(null) '.

  09/03/16 12:05:23.446 PM Mail [634]: CFNetwork SSLHandshake failed (-9807)

  09/03/16 12:05:23.716 PM Mail [634]: CFNetwork SSLHandshake failed (-9807)

  09/03/16 12:05:24.076 PM sandboxd [139]: com.apple.Addres (501) ([501]) deny com.apple.cdp.daemon mach-search

  09/03/16 12:05:24.626 PM Mail [634]: CFNetwork SSLHandshake failed (-9807)

  09/03/16 12:11:40.263 Safari [624] PM: KeychainGetICDPStatus: key :-25300

  09/03/16 12:11:40.263 Safari [624] PM: KeychainGetICDPStatus: status: power off

  09/03/16 12:49:52.821 PM Mail [634]: * the Assertion failure in French-[IMAPParseContext _parseStatusResponse], /Library/Caches/com.apple.xbs/Sources/Mail/Mail-3112/IMAP/Connection/Responses/ IMAPParseContext.m:956

  09/03/16 12:49:52.821 PM Mail [634]: exception IMAP response analysis: tried to parse a response from status without knowing the separator character.

  I'd appreciate any suggestions.

  Is your IMAP account?

  You have stored messages slot "on my Mac"?

  If create you your account in a new user, it works correctly?  (see below)

  See my answer in a similar debate. Let me know if you need more assistance.

  Re: The first time to open Mail.app: opens the window Import Mail Message - crashes during the infinite-import cycle how to break it?

  Re: Certificate error. When the message appears you must choose "see the certificate", then select "always Trust ' in keychain."

  CREATE A NEW USER

  Go to system-> Preferences, create a new user in users and groups.

  Place in the new user by logging in under the Apple in the menu bar.

  Log in to the new user.

  You can skip the connection with an Apple ID, unless you want to test an iCloud account. Select continue, then jump.

  Open Mail and add your account. If it's a POP account, make sure that you do not select "remove copy from server after retrieving a message," on the Advanced tab.

  

  You still see the issue?

• S3000 - x 4: need to buy spare parts in the United Kingdom

  Hi, I need to buy a new lid for my s3000 - x 4 because it is cracked near the hinges. Does anyone know where I can get these to the United Kingdom? Thank you.

  John

  Hello John

  I put t live in the United Kingdom, but there is not a lot of opportunities to find one:
  -order a service partner
  -check if you can find a defective unit by ebay and use it for spare parts or
  -Google bit.
  Maybe you will find a shop where you can order the necessary parts. If this is not the case in the United Kingdom avoid any problem to order the cover from another country.

  Good bye