Need to change the color of a dark black blue file

Similar Questions

• Hello, a graphic designer created my logo. I need to change the color from black to white and then make it bigger so I can add it to a T-shirt. I looked online and can't find a way to do it. Please help :)

  Hello, a graphic designer created my logo. I need to change the color from black to white and then make it bigger so I can add it to a T-shirt. I looked online and can't find a way to do it. Help, please

  Guess that's your logo. His place of 1000px

  

  Select each layer, and then type cmd - I or ctrl-I on the keyboard and that will reverse the color of the objects on the layer. Black is the

  opposite of white

  

  And then resizing the image size under Select image menu and place values expanded in the dialog box

  as below.

  

  That's all. It may be useful

  Terri

• Need to change the color of flight hover/mouseover on flash file - HELP!

  Hello world

  I am doing a project for work and need to change the color on this file I purchased from iStockPhoto. It's a flash world map file, which highlights the countries you select Green. I just want to change it so that all the highlights are made in red instead, but no am not a flash developer so don't know how to do it. I used flash briefly before for minor changes, but can't seem to find the answer anywhere. I tried Googling it... etc!

  This is the file that I bought.

  http://www.iStockphoto.com/file_closeup.php?id=2788655

  Any ideas would be MUCH appreciated!

  I took a glance at the file you sent. This file was made some time in an older version of Flash. I'm guessing that version 6. The Actionscript code in the movie is AS2. The file is in the scenes and consists of buttons, a lot, a lot, buttons. If you open the movie library, you will see a very long list of items that are used in the film. The first point, Afghanistan, for example is a single country. If you open this button in the editor, you will see there two executives, above. Each country drawing in each of these frameworks is composed of a group. That's why he shows an overview rather than the country in color.

  To change the color for the rollover State:

  1. go to section in addition to a single country.

  2. choose Select all from the Edit menu, or use the keyboard shortcut.

  3. choose a jump outside of the Edit Menu. This will separate each item in the group.

  4. use the selection tool to select the sketch.

  5. in the toolbar, select a new color line and filling for this country.

  Repeat if necessary. Save often. Work of a duplicate of the original film, just in case.

  Simply re-color of each country, the continents are made up of the country.

  I hope you have a lot of time, it will be horribly tedious.

• Need to change the color of the model

  I realized a customer to a model site and they chose a model that has been a PSD (attached) and I turned into a working site. Now, they say they want it to be blue instead of green it is. I don't know where to start. I guess I need to go to each layer and change the color of a variant of blue. Is there a quick way to do it? I don't know yet how to change colors. Any help would be greatly appreciated.

  Thank you!

  You don't need to do this for each layer. Only those with the color of the Web page elements and only those that are visible. (eyeball on in the layers panel)

  When you select the layer, and then you go to the Image menu, settings and select Variations. You can interactively experiment until you find what's best.

  My layer thumbnails are large so I can see at a glance what I look at. Use the layers panel menu to display Options Panel and select large thumbnails.

  Of course save this model before loading in the PS, in case you should do more.

  That should help you get started.

• For Adobe Reader for iPad: for the Write Anywhere feature, how can I change the color from red to black?

  For the Write Anywhere feature, how can I change the color from red to black?

  Hi Jason,

  Open the PDF in Acrobat Reader

  By the low toolset select comment > Freehand

  After doing the drawing freehand click on save at the top right

  Then tap & hold on this drawing freehand in the PDF file and will get a contextual menu just above in the black bar.

  The menu options are: delete, thickness, color, opacity

  From there, you can change the color.

  Thank you

  Abhishek

• Hi, need to change the color of line at run time

  Hi all
  
  I have columns in the paintings is one of them for YES and it is of TYPE I create two attribute for this and place like this to trigger post_query block-level after that I get what I want the color of the YES and NO, but
  NOW I NEED TO CHANGE THE LINE COLOR IN FULL WHAT IT TAKES PLEASE GUIDE
  
  IF: ORDER_TRACKER2. TYPE = "YES" THEN
  SET_ITEM_INSTANCE_PROPERTY ('ORDER_TRACKER2.) TYPE ', CURRENT_RECORD, VISUAL_ATTRIBUTE, 'ATT_NO');
  ON THE OTHER
  SET_ITEM_INSTANCE_PROPERTY ('ORDER_TRACKER2.) TYPE ', CURRENT_RECORD, VISUAL_ATTRIBUTE, 'ATT_YES');
  END IF;
  
  Thanks and greetings
  Vikas Singhal

  IF :ORDER_TRACKER2.TYPE = 'YES' THEN
    SET_ITEM_INSTANCE_PROPERTY ('ORDER_TRACKER2.TYPE', CURRENT_RECORD, VISUAL_ATTRIBUTE, 'ATT_NO');
    SET_ITEM_INSTANCE_PROPERTY ('ORDER_TRACKER2.ITEM1', CURRENT_RECORD, VISUAL_ATTRIBUTE, 'ATT_NO');
    SET_ITEM_INSTANCE_PROPERTY ('ORDER_TRACKER2.ITEM2', CURRENT_RECORD, VISUAL_ATTRIBUTE, 'ATT_NO');
    SET_ITEM_INSTANCE_PROPERTY ('ORDER_TRACKER2.ITEM3', CURRENT_RECORD, VISUAL_ATTRIBUTE, 'ATT_NO');
    SET_ITEM_INSTANCE_PROPERTY ('ORDER_TRACKER2.ITEM4', CURRENT_RECORD, VISUAL_ATTRIBUTE, 'ATT_NO');
    SET_ITEM_INSTANCE_PROPERTY ('ORDER_TRACKER2.ITEM5', CURRENT_RECORD, VISUAL_ATTRIBUTE, 'ATT_NO');
  ELSE
    SET_ITEM_INSTANCE_PROPERTY ('ORDER_TRACKER2.TYPE', CURRENT_RECORD, VISUAL_ATTRIBUTE, 'ATT_YES');
    SET_ITEM_INSTANCE_PROPERTY ('ORDER_TRACKER2.ITEM1', CURRENT_RECORD, VISUAL_ATTRIBUTE, 'ATT_YES');
    SET_ITEM_INSTANCE_PROPERTY ('ORDER_TRACKER2.ITEM2', CURRENT_RECORD, VISUAL_ATTRIBUTE, 'ATT_YES');
    SET_ITEM_INSTANCE_PROPERTY ('ORDER_TRACKER2.ITEM3', CURRENT_RECORD, VISUAL_ATTRIBUTE, 'ATT_YES');
    SET_ITEM_INSTANCE_PROPERTY ('ORDER_TRACKER2.ITEM4', CURRENT_RECORD, VISUAL_ATTRIBUTE, 'ATT_YES');
    SET_ITEM_INSTANCE_PROPERTY ('ORDER_TRACKER2.ITEM5', CURRENT_RECORD, VISUAL_ATTRIBUTE, 'ATT_YES');
  END IF;
  

• I need to change the color of my vector symbol

  I bought a vector drawing on Adobe Stock Photo, it's the number #64483594

  How coulkd change its color?

  Thanks for your help!

  Tiziano

  tizianoradice,

  a quick way:

  • Open the file in Illustrator
  • Select the all yellow-white ornament
  • Press [R] / / Rotate tool
  • Press [Enter]

  --> 60 °

  -->, click on Preview in

  --> Press the [Copy] button

  (Maybe you have to arrange the duplicate)

  If the construction is ok:

  • Select the ornament set yellow-white (original and copy)
  • and merge with pathfinder (add)

  Have fun

• I need to know how to change the color of an image.

  I'm not a designer and do not pretend to be. Someone made a logo for me and gave me in photoshop. But I need to change the color of the logo. I bought the creative cloud and watched tutorials for days. I used the Replace Color tool and get out of there, but not really. Help, please. :/

  Hi Rachel, if you have the file have you can edit it directly in its native software that is Adobe Illustrator.
  To change the color to do the following.

  (1) open the file in Adobe Illustrator
  (2) once opened, select the white (or black) arrow tool in the upper left corner of the screen and click on the green lines. 90% this will select the entire line.
  (3) now, look at the bottom of the tools Panel on the left side of the screen, there are two colors. One is for the fill color and one for the color of the outline. One of these two is probably green. If so, double click it and choose the color you want. Click ok in the color Panel and you're done.
  (4) do the same thing on each side of the logo.

  There is a chance, the designer of the whole logo in groups. If this is the case (you will notice because you will not be able to select only the lines), take the black arrow tool and double click on the logo, until you'll be able to simply select the lines.

  Please let me know if it was clear and that you succeed.
  Kind regards

  Martin Benes
  Adobe Acp

• Change the color of text Cluster

  I need to change the color (text or backgroung) of an individual in the cluster of 8 positions index.

  I make a test with 8 different results and at the end of each result, I need to change the RED color to fail or green to go. I have a result Boolean cluster of 8 positions (T = pass) and F = Fail and I have another post 8 text cluster to change the background color or text.

  Thanks to you all

  Here's a method using text blocks.  As Raven Fan said, you can use the Boolean values (can be personalized if you don't like the default appearance) which have the desired appearance.

• How can I change the color of my fonts on the desktop icons?

  I need to change the color of the text on my desktop icons, how do I do this?

  Hello petejgraham,

  Thank you for visiting the Microsoft answers community.

  The color of the icon is not available for change in Windows by their design. There are however third-party applications that can allow you to have more control over development within Windows. You can search on your search engine preferred, for exactly what you are wanting to do, and it will give you options.

  Hope this helps

  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Chris.H
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Dynamically change the color of a string (part of the) text

  Suppose that consider the string Hello "it's the first Blackberry Application" including the color of the text in black, but a few changes need to change the color of the Blackberry to RED as below

  previous - Hello this is the first Blackberry Application

  After - Hello this is the first Blackberry Application

  I tried with split the text into several fields and change the color but I need single solution for Richtextfield / EditField / text box.

  plese give me some suggestions...

  Thanks in advance

  Only ActiveRichTextField will do this for you.

  You define regions, join fonts and/or attributes to the regions, including the background and foreground colors.

• change the color of line based on the value of column 5 Apex in the classic report

  Version of the apex 5.0.0.00.31

  Standard universal theme

  Page theme default template

  Classic report

  Foldable report template

  Hello

  I know this question has been asked several times here, but I'm working on 5 Apex and need to know the correct way to do it in this version.

  I need to change the color of the text of the entire line (no background color) based on the value in one of the columns of the classic report. I have just two conditions, if the value of column = Yes, color should be red, otherwise it must be green.

  I am new to jscript and css, so appreciate if someone can tell me the solution with steps.

  I have already checked this link that changes the value of the column, need to do something similar to the whole line.

  https://tylermuth.WordPress.com/2007/12/01/conditional-column-formatting-in-apex/

  Hi coolmaddy007-Oracle,.

  Here's an example set up on the apex.oracle.com according to the specifications you gave: https://apex.oracle.com/pls/apex/f?p=35467:1

  Version of the apex 5.0.0.00.31

  Standard universal theme

  Page theme default template

  Classic report

  Foldable report template

  Here is how it is done:

  Create a dynamic action with the following specifications:

  Name: Give the appropriate name

  Event: After refresh

  Selection type: region

  Region: select your region classic report

  Condition: No strings attached

  Action: Run the JavaScript Code

  Fire on loading the Page: Yes

  Code:

  $('td[headers="JOB"]').each(function() {
    if ( $(this).text() === 'MANAGER' ) {
      $(this).closest('tr').find('td').css({"color":"red"});
    }
    if ( $(this).text() === 'SALESMAN' ) {
      $(this).closest('tr').find('td').css({"color":"green"});
    }
    if ( $(this).text() === 'CLERK' ) {
      $(this).closest('tr').find('td').css({"color":"blue"});
    }
  });
  

  NOTE: Download the selector appropriate for your knowledge $('td[headers="JOB"]') case using firebug/browser development tools.

  Items concerned: leave blank.

  PS: Changed the example to change the color of text instead of the background color.

  I hope this helps!

  Kind regards

  Kiran

• Change the color of a specific character in a text.

  Hi guys! for a project I need to change the color of each "a" in a text. Is there a way I can do it automatically?

  Aaaah! Try using a simple grep style!

  If you need to play in all the paragraph styles, map of style grep using this very clever script written by Colin Flashman, King of merge data!

  https://DL.dropboxusercontent.com/u/55743036/grepstylemap.jsx

  or a simple F/R.

• How to change the color of the navigation bar based on other

  I need to change the color of my navigation bar, on my page. I already did on my other three pages. With the help of http://work.smarchal.com/twbscolor/scss/9b59b68e44adecf0f1ecdbff0 , but now I have made a new page I don't know how to change the color of the navigation bar to match exactly the three other pages. Please help.

  Bootstrap CSS is read-only and should never be changed.
  

  Creating CSS code on each web page is redundant & can cause inconsistent styles.  Use rather a stylesheet external called custom.css including all your HTML files are linked. In this way, when you make changes to your custom.css file, these styles will automatically apply to all pages of the site.

  Both inside theTag under the Bootstrap CSS code, add a link to your custom.css file.

  Nancy O.

• Change the color of line based on condition.

  Hello

  Am using jdeveloper 11.1.1.6.0

  I slipped and fell by xxxVO as an array of af in my jspx page.

  This vo has the attribute of gravity which is a component to select only one option.

  I need to change the color line if gravity = 1.

  How can I achieve this.

  Kind regards

  Prasad K T,.

  9840021070.

  Refer

  ADF: color change of the value of the column according to the requirement