need to change the value of variables without deploying

Similar Questions

• I need to change the values of username password in my bpel process each mount

  i AM NVOKING a BPEL PROCESS of SECURE

  You can do this in several ways...

  using dvm

  storage in db and the table updated

  best way to do is to use the deployment descriptors

  Follow below

  BPEL properties
  It is possible to have properties set in the BPEL process. Properties are set on a global scale and outside the BPEL process. The properties are accessible via an internal function.

  In the bpel.xml file, add the following lines just before the end of:

  
  [email protected]
  

  Properties are available in the BPEL process (.) BPEL file) via the function ora: getPreference():

  Ora:getPreference('propertyEmailAdress')

  In a future article, we discuss how to use the properties of the database call this through a single and same BPEL process.

• Change the value of the Variable presentation

  Hello
  If I want to change the value of the variable presentation, where I can change. Means that I need to check the value of the variable presentation and then I need to change the value of the variable presentation.
  I need help from anyone.
  Thanks in advance.

  When all the choices is selected past the value zero in the variable of presentation...

  Why not consult especially column by making it is fx as a presentation...

  in any case, if need be like that you can't pass null (persons) to your title. You should change it accordingly...

  create a column in the criteria, changing it is fx to: case when ' @{Pers_Var}' is null then 'people' else ' @{Pers_Var}' end

  Call the location of the column with the text in narrative mode, then add it to made available...

• Change the value of the variable object type

  Hi all!
  
  I created an object using:
  
  CREATE or REPLACE TYPE some_object AS OBJECT
  (
  some_information NUMBER,
  Une_fonction RETURN NUMBER of MEMBER FUNCTION
  )
  
  and when I tried to implement the member function 'une_fonction' who need to change the value of the variable 'some_information' as:
  
  CREATE or REPLACE TYPE some_object AS BODY
  
  FUNCTION MEMBER une_fonction NUMBER IS BACK
  BEGIN
  some_information: = some_information + 5;
  RETURN some_information;
  END;
  
  END;
  
  This is for me the following error:
  
  
  TYPE BODY CMS compile errors. SOME_OBJECT
  
  Error: PLS-00363: expression ' SELF. SOME_INFORMATION' cannot serve a purpose of assignment
  Line: 5
  Text: some_information: = some_information + 5;
  
  The question is:
  
  How to implement my function can change the value of 'some_information '?

  Benny Lava says:

  Thank you, but I really need to change the value of this variable.

  Then the member method requires write access to the object - and not only read access. To set write access, add the auto setting which allows him to change itself.

  SQL> create or replace type TSomething as object(
    2          some_number     number,
    3          member procedure SetN( self IN OUT TSomething, n number )
    4  );
    5  /
  
  Type created.
  
  SQL>
  SQL> create or replace type body TSomething as
    2
    3          member procedure SetN( self IN OUT TSomething, n number ) is
    4          begin
    5                  self.some_number := n;
    6          end;
    7  end;
    8  /
  
  Type body created.
  
  SQL>
  SQL> declare
    2          s       TSomething;
    3  begin
    4          s := new TSomething(5);
    5          s.SetN(10);
    6          dbms_output.put_line( s.some_number );
    7  end;
    8  /
  10
  
  PL/SQL procedure successfully completed.
  
  SQL>
  

• Change the value in the external xml file

  Hello

  I searched around for a while and have not been able to find the solution to what I think should be a simple problem.

  I have an xml file I need to change the value from False to True.

  The structure of the file is:

  < data >

  System < pages >

  < id > 1 < /ID >

  < other fields > < / other areas >

  < dynamic metadata >

  < name > publish < / name >

  Yes < name > < / name >

  < / dynamic metadata >

  < dynamic metadata >

  FrontPage < name > < / name >

  < name > no < / name >

  < / dynamic metadata >

  < / system-page >

  <! - tons more system pages - >

  < / data >

  I am able to read the file and get to the exact line as such:

  <cffile action="read" file="E:\test.xml" variable="newsFile" charset="utf-8"/>
  <cfset newsXML=XmlParse(newsFile)/>
  <cfset arrItemNodes = XmlSearch(newsFile,"/data/system-page[@id='1']/dynamic-metadata[name='frontpage']/value")/>   
  

  I don't know how to edit and save the value. I Imaging it is something like this:

  <cfset arrItemNodes[1].xmlText = 'True'>
  

  
  But is there anyway to record this information in the xml file in the right place?

  Any help is appreciated.

  Haha. Well, if you need to do in the future, now you know how ;-)

  See you soon

• changing the value of the indicator

  I need to change the value of an indicator, while the program is running.

  I enclose a VI

  1. a double is given as input to find derived from ptbypt, and then I compare the derivative (threshold) to enter the value to give a Boolean result.

  I need the user to change the threshold value as required by him.

  Thanks in advance

  Well, use the property node.

  Ran

• Change the value of the DefaultTimeToWait parameter

  I need 2 change the value of the parameter DefaultTimeToWait of its current value.

  To display the parameter, in the client on the ESX VI, click the configuration-> storage adapters tab then click on ISCSI (usually vmhba33/34) map properties, then click Advanced. The value is grayed out and cannot be changed.

  Does anyone know where it is fixed?

  Madrilleno

  Madrilleno,

  I do not have a link.  Your support contact can probably provide some information.

  The description that you have obtained is accurate enough.  In some unusual cases, a frame is sent of ESX with the wrong source MAC address.  Given that the

  response to this frame is never to where it is supposed to go, it's as if the answer was abandoned.  Once a Nop come to this session, the Nop expires and the connection is reset.  (This is how the Nop should work.  The problem is the answer is to have misdirected and lost.)

  Thank you

  Andy

• How to change the values of business rule at run time?

  Hello
  
  I'm using Oracle 11g SOA. I did a BPEL process that uses Business Rule. Now the BPEL process is deployed with business rules so how to change the value of the business @runtime rule. I don't want to change the value @design time and deploy the code again.
  
  Is there a console or the portal? as Oracle BAM has own url? What is the url of Business Rule Manager?
  
  
  Thank you

  Can you check is the deployment of "composer" is in Active state.

  In the weblogic administration console, navigate to Environment--> Servers--> SOA_SERVER1--> Deployments (tab) on the left side of the menu.

  Thank you
  Vijay

• I want to add auto IE tab firefox without the addition of manual, also I want to change the value of extensions.ietab.filterlist without classes to the topic: config

  (1) I want to change the default extensions.ietab.filterlist to mywebsite url value without having to follow several steps, each time that the user is going to hit my site, then to the users of the browser extensions.ietab.filterlist value must be added when it will hit my site. Topic: config, we can add manually, but I don't want to manually add, is it possible to automate this process.
  (2) is it possible to install the activex (extension Ietab) without clicking on add to firefox, I ask because my site is not supported in firefox because of the activex.

  (3) how to add admin privileges for activex in firefox.
  . Please help me

  I found the solution to this problem,
  (1) I added the User.js file in the default mozilla profile folder IE
  C:\Users\xpointers\AppData\Roaming\Mozilla\Firefox\Profiles\xb2fxdxi.default, I've added in user.js
  user_pref ("extensions.ietab2.filterlist", ' / ^ file:\\/\\/\\/.*\\. ") (mht) | ("mhtml) $/ http://*update.microsoft.com/* http://www.windowsupdate.com/ * http://www.UrWebsiteUrl.com/ * ");

  You can add n number of URLs to run in IETAb or IEtab2.
  User.js file overwrites the prefs.js file.

  (2) allowing to automatically add extensions to add addon, using the code and need to change the extensions.json file to the new version of firefox, for the old version of firefox need to change in the sqlite database.

• How to change the value of string clustered, to implement using the node value of property instead of writing directly on the flow of data or using the variable

  new to labview :-) and I have a problem when I want to change the value of a string in bunches, and I want to implement this using the node value of property instead of writing directly to the stream or by using the variable, enclosed is the picture.   No matter, I have change in cluster (control) or value of Popery out (indicator) cluster, the value (sensor 7) dataflow keeps unchanged even I gave the new value by value of property node. Thank you to give me some advice about this.

  

  Hi GerdW

  Thanks a lot for your answer. The reason I'm stubbornly tring to break the flow of DATA is: we have a test system that have about 100 screws, they have a few connected flow, some of them will be unbundling a cluster dataflow chain to check the value in order to make the different cases.  Now I want to insert user event by changing the control and influential cases during run time.

  As I initially uses a global variable (to control cases) instead of unbundle string data flow, it works well.  But then, I found there are a lot of screws that are using the string unbundle.  One of the 'lazy' means, I tried is to change the value via the property node (because that way, I did not need to find all the places where using the unbundle string and replace them with the global variable), then I noticed a problem with "dataflow", the value in the stream of cluster in fact will not be changed by changing the value of the property node.

  I did a test with VI simple (like the picture in last post), and after reading your advice, I tell myself that I need to understand the concept of "DATAFLOW" in labview, it seems that my "lazy" way can not work in this scenario.

  I have attached the criterion VI here, have you furthur suggestions on what I can do in this case?

  Mant thanks!

  Minyi

• Can I change the values of the variables in the variables view control?

  I want to use the variables view control in Labview. I see only the values, but I can't change the values or create new Variables. Will there be a chance to do?
  I use Labview 8.6.1 and Teststand 4.1.1.

  You must activate the edit mode for the ApplicationMgr, by setting ApplicationMgr.IsEditor to true. Note that you must have at least the license of the custom editor for teststand so that it works (otherwise it will prompt the user to activate a license with these privileges).

  Hope this helps,

  -Doug

• Need to change the field Office in the list of values

  Hi guys,.
  
  I need to change the field Office in LOV where form of people, customer actually requires some preset values in this area, through customization is possible? or not?
  
  
  Kind regards
  
  
  Ssali

  As I understand you cannot change a field of LOV using the Persolization form. Yes, you can use the de FACTO forces for the same reqirrment.

  Thank you

• PROBLEM changing the value of a variable in my scene movieclip

  Hello
  I have a problem changing the value of a variable in my scene movieclip. I explain: I combobox on my stage containing the categories, and in the scene that I load an xml file containing links to php files that work with the combobox control.
  On the stage I have a movieclip "camera roll" inside this movieclip on the first image I have a php script file selected in the scene of loading. I use a function with a variable load() "theUrl" inside like this: T.load (theUrl);
  In my scene, I want to change the value of "theUrl" within the film of movieClip. I tried filmstrip.theUrl = url; But it does not work

  the xml file
  <?xml version="1.0" encoding="ISO-8859-1"?>
  <slideshow>
  <area title1="10 Last updated" link1="link1.php"/>
  <area title1="special" link1="link2.php"/>
  </slideshow>

  Here is the code on my stage:

  var link1:Array = new Array();
  var LINK:String;
  var url:String;
  var whoOn:Number;
  whoOn=0;
  var x:XML = new XML();
  x.ignoreWhite = true;
  x.onLoad = function(success) {
  var photos:Array = this.firstChild.childNodes;
  for (i=0; i<photos.length; i++) {
  _root.link1.push(photos[i].attributes.link1);
  }
  url=link1[whoOn];
  filmstrip.theUrl=url;//<<--HERE
  };
  x.load("category.xml");
  
  var cbListener:Object = new Object();
  cbListener.change = function(event_obj:Object) {
  trace(select.selectedItem.label);
  if (select.selectedItem.label == "Last updated") {
  whoOn=0;
  } else if (select.selectedItem.label == "Special") {
  whoOn=1;
  }
  url=link1[whoOn];
  filmstrip.theUrl=url; //<<-----HERE   
  };
  select.addEventListener("change",cbListener);
  
  

  Here is the code inside the clip "film".

  var T:XML = new XML();
  T.ignoreWhite = true;
  T.onLoad = function(xml) { 
  etc etc etc }
  
  T.load(theUrl);    //<<---HERE it still undefined

  the code on the timeline of the film should be placed in a function() (or better, move all your code to the main timeline).  but, if you leave the code on the timeline of the film strip, call the function that contains this code whenever the url changes.

• Is it possible to change the values of particular #define of the various controls in CVI.

  In my application, I have different panels to file single .uir. When I save the .uir file, I get the same values of #define for different controls in different panels. For this reason, I am not able to use these #defines block switch. Is it possible to change the values of #define according to my condition.

  Hi, a little more Wolfgang post. It is the combination of the Panel to manage and control the unique ID: as you know, you can load the same panel more than once, so even if you recover the full chain of PANEL_CONTROL you have duplication. items that exactly identifies a particular control in a particular group are the combination control panel manage AND panel_control ID.

  On the one hand which guarantees more flexibility to your application, you can design only a few panels and reuse them whenever you want, even having some of them loded several times in the same instant. On the other hand, as you have discovered, there is the possibility (Finally, almost certain) duplicated in your app ID.

  To resolve the problem of duplicated IDS you can act in two ways:

  1. If you know that no Panel is never loaded several timer in your application, you can retrieve the name of constant of Panel with GetPanelAttribute (panelHandle, ATTR_CONSTANT_NAME, string); and to distinguish between the name of constant, then switch between control ID

  2. If you happen to have duplicate panels you will need to store each panelHandles in the non-volatile variables, switch between them and then switch between the control ID

  An alternative might be to use Panel callbackData attribute and assign a significant value during the loading of the Panel, other callbackData finally from a control ID. Something like this:

  Loading panels:

  panelHandle = LoadPanel (0, "myfile.uir", PANEL1);

  SetPanelAttribute (panelHandle, ATTR_CALLBACK_DATA, (void *) 1);   Assign different callbackData in each instance

  During the failover between controls:

  void * cbkd;

  GetPanelAttribute (panelHandle, ATTR_CALLBACK_DATA, &cbkd);)
  Switch (cbkd (int)) {}
  case 1: / / elements of the PANEL1
  switch (command) {}
  case PANEL1_NUMERIC:

  your code here
  break;
  case PANEL1_STRING:
  your code here
  break;
  }
  break;
  case 2:
  // .....
  break;
  }

  One final note: it seems to me that all this is necessary in a very limited situation, where you have the same callback called on various panels/controls. Whenever the reminder is unique to a specific panel or controls on a single panel you don't need to work that way.

• Need to change the settings vmx CPU-mask on the fly

  

  In a migration scenario that I need to change the CPU mask without a chance to turn off virtual machines for the changes.
  Is it possible to do without crashing it?

  I do not have the exact settings, but I can give them later.
  At the moment all the tips are welcome

  It's advanced vCenter (set to false).
  Administration--> vCenter Server Settings--> Advanced settings

  Here's the brutal approach;

  config.migrate.test.CpuCompatibleWithHost
  -With this setting, all the stable related to CPU compatibility throughout the vCenter Server is disabled.  If you have ESX/ESXi hosts on different hardware, will not be tested the CPU compatibility, and this could have implications serious impacts on virtual machines.

  But you might want to watch using the following instead.

  config.migrate.test.CpuCompatibleMonitorSupport
  -Including the value of this parameter, then 'version of the product does not support functions' errors will be removed, but other errors of CPU compatibility will be still tested for.

  config.migrate.test.CpuCompatibleError
  -The value of this parameter, then CPU compatibility warnings is still displayed in the migration wizard, but they do not block the migration.

  See you soon,.

  Jon