need to "extract" a numerical value of the given XML node
My question: -.of a document XML how can I 'extract' a numeric value for use in a "customized math expression" to convert inches into millimetres/centimetres dimensional data?
FYI: -.
When you use a component XML Connector that I am able to load and display the values of XML data, of my choice, the XML document required; the data is loaded into the components that are instances of TextArea or TextInput.
background: -.
in order to make use of the value of XML data I tried to assign it to an 'intermediate and temporary variable' using the ComponentInstanceName.text option in an assignment, but that effort failed, where this post.
your comments: -.
all comments, suggestions, ideas are received with gratitude; Please keep in mind that cindy I am a newb to XML format, but hope that change in the coming months.
Thanks for your time.
... and so, I discovered that the main reason for my bad be able to access the data is due to the fact that the xml data is not fully charged in my application when my code is trying to access. of course it's because of the asynchronous loading of the Flash XML Connector component behavior.
so the repair to the original message is:-
check that the data is fully loaded into the app and only then access and assign it to all the other required variables.
SORTING :)
Tags: Adobe Animate
Similar Questions
-
Add numeric value in the column in the Table
Hello
My problem:
I have a VO with a numeric attribute (Sal). This VO is present in a table in a JSF Page.
I need to add a numerical value to the value of the column.
I have try it with #{row.bindings.Sal.attributeValue * 2} or #{rank. SAL + 2} or #{rank. Sal.inputValue + 2} but I get an error.
Can someone help me?
Thank you
11.1.3 JDevHello
one option would be to use a transitional attribute in the VO to calculate math or to fill in the field column of a managed bean. You can point the field for the column to a property of the managed bean (say sumSal). In this getSumSal() method you
1. use ELContext and ValueExpression ExpressionFactory to resolve the reference #{line} (you can cast oracle.jbo.domain.Row
2. call the row.get ("attribute_name") to access the value of the field
3 compute and return the value to display in the tableNote that using a transitional attribute may be easier to achieve and easier to reuse in other uses of the VO. However, you will have options
Frank
-
How to place numerical values on the peak in graphs
Hello
Is it possible to put the numerical value on the crest of the wave as in the below image where the yellow dots on the Ridge, we put value digital pic?
It needs a lot of cleanup (and there are probably still have a better way in general), but it should at least help you get started.
I used the Detector.vi Peak, which requires the LV Full Development System.
-
I want to create a 2 cells in demand for numbers, the 1st cell is a dropdown menu with items of text, when choosing an item, that it would be represented by a numeric value in the other cell. How can I do?
You can use vlookup() like this:
(1) crate a table like this:
the first line is a heading row
the first column contains the same list of items in the context menu
the second column contains the corresponding values
name of the table 'value '.
In another table (where the pop-up menu), you can use the table of choice of 'Value' like this:
create a drop-down list in cell B1
Select cell C1 and type (or copy and paste) the formula:
= VLOOKUP (B1, Value::A:B, 2, 0)
short hand for this is:
C1 = VLOOKUP (B1, Value::A:B, 2, 0)
now change the pop-up to display the value in the change of cell C1
-
Is it possible to connect a simple 1 d array to a digital indicator or what would be the best way to display the numeric values of the array on the front panel? Examples or suggestions would be greatly appreciated.
Thank you
Tunis
Thank you Adam, it's originally in a while loop, I placed it in a loop for example, wired County in the for loop and presto, this son of a digital indicator. It works very well. Thanks for the help folks.
-
Value of the selected tree node
Hello
I'm new to Apex (4.1.1) and I'm having a small problem.
I had 2 Pages. The frist one is composed of a treeregion and a "submit" button.
The Second is a report.
I want to create a workflow, the user selects a treenode shipment and presses. Then it will be redirected to the reportspage,
that will show him a report according to the treenode that he selected on the first Page.
Problem:
I don't know how I can read the value of the selected treenode.
I hope you can help me.
Thank you
FrédéricHi Frederic,.
To get the value of the selected tree node, you can make use of the "selected Page element node' attribute on the attributes of the tree page. Just create an element of your page and set the "Page of selected node element" of this new item page. Then fill the point via the BINDING of your tree query parameter. For an example, take a look at the following: http://apex.oracle.com/pls/apex/f?p=36648:6, where I put my point page P6_SELECTED_NODE to the value of the node selected in the first tree that is empno. Your report query must refer to the node selected item "Page, to make sure it displays information about the selected tree node.
I hope this helps.
Kind regards
Hilary -
How to get the day as a numeric value without the date in shape?
Hello
to reduce the costs of a sql statement, I need to get the day of a date under the number (to compare to a numerical value) value without formatting. Each formatting causes a complete table of the table scan and the date field. Is there a function for this problem?
Version of Oracle's 11g.
Thank you CarstenYou can use EXTRACT...
SQL> select extract(day from sysdate) from dual; EXTRACT(DAYFROMSYSDATE) ----------------------- 7 SQL>
-
Data clean on a numeric value in the text field
Hello team,
There is a field called 'turnover' in our Eloqua instance. It is a text field, but contains mostly numeric values synchronized in the same field of SFDC. The SFDC field is numeric.
I am trying to write a program of standardization of data that uses the "Annual sales" value to update another field, "standardized annual income", with the value appropriate for example Strip $0 to $5 M, $5 - $10 M, $10 / $20 M...
I created a rule to update that search values:
- between 1 and 5000000 "turnover" and updates the "standardized annual income" field of $0 à $5 M
- between 5000001 and 100000 in the "Annual income" and updates the "standardized annual income" field $5-$10 M
- and so on...
However when I test it I get the correct value in 'annual standardized income. " I also tried using filters to make contacts with the "annual income" values between 0 and 5000000 but I get all kinds of values outside this range.
Can someone tell me where I'm wrong? Is it because the data type of the field 'Turnover' is the text rather than digital? I guess I could create a new numeric field for "Annual income", write values existing in this area and change the SFDC integration but I would avoid it if possible. If anyone has any bright ideas, I'd love to hear them.
Thank you
James
For anyone interested, I got the answer from the Support. As it is established as a text field that eloqua is trying to make an alphabetical "between" rather than a digital "between". As it is not possible to change the data type of a field, I need to create a new digital field, export the data to the existing field (as well as email address) and upload again to the new field.
-
Need a solution to update values in the table
My version of oracle is 11 and my table name is nit_xml in which column the name is cust_dtls
Nit_xml table data
< root >
Nitesh < Cust_dtls > < / Cust_dtls >
< / root >
I want to just update Nitesh Nit...
Its inserted i through this way, values
INSERT INTO nit_xml
VALUES)
' < root >
Nitesh < Cust_dtls > < / Cust_dtls >
< / root > '
So I tried to update my way like like that
UPDATE nit_xml
SET cust_dtls = ' < root >
Nitesh < Cust_dtls > < / Cust_dtls >
< / root > '
WHERE cust_dtls = ' < root >
Nitesh < Cust_dtls > < / Cust_dtls >
< / root > ';
But not working if anyone can give me any ideas about XML as well as how it works and what is possible or not to update through query... His note I want to update the column cust_dtls based on the same value of the column and not any other data type number or varchar2 because that based on other datatype it works easily and the second thing her i use application TOAD while the manual update is possible which is very good, but I need to update directly through query...
Kind regards
Nitkhush...Niteshkhush wrote:
But in this link and that updated the example is based on once again the string as warehouse_name as 'san fransciso', but I want to update based on the same datatype column in which I am faced with the difficulty of writing where the clause can u give some advice...Like this?
update nit_xml set cust_dtls = updatexml(cust_dtls, '/root/Cust_dtls/text()', 'Nit') where trim(extract(cust_dtls, '/root/Cust_dtls/text()')) = 'Nitesh'
-
type conversion of numeric value in the time format
Hi guys,.
I have the column called need .i (time in seconds) to convert the numeric value of a column in time format HH. for example 3012 = 00: 50.12.
How can I proceed even in the front.
Thank you and best regards,
NanduHi Nelly,
Pls go through the below formula:
This deffenitely will help you resolve the issue.Concat (concat (concat (concat (cast (floor ((COLUMN_NAME) / 3600) as char), ':'), cast (floor (mod ((COLUMN_NAME), 3600) / 60) as char)),': '), cast (floor (mod (mod ((COLUMN_NAME), 3600), 60)) as char))
Thank you
Cognet -
Extract all numerical values of >; = 10 length
Hi all
I have a table named "STS_HISTORY".
in which I have 2 fields
Number STSID
History varchar2 (4000)
I need to create another table that has 2 fields
stsid, mynum
where stsid is the same from the table of sts_history
and mynum will contain the numerical value of > = length 10.
for example
will he be stsid: 1 the history field is
"123456789 1234567890 here 12345678901 123456789012 1234567890123 data please 12345678901234 seprate 1'
You must then put
1 1234567890
1 12345678901
1 123456789012
1 1234567890123
1 123456789012345is there way to sm to do using only does not xmltable
of course there are:
SQL> with sts_history as ( select 1 stsid, '123456789 here 1234567890 is 12345678901 some 123456789012 data 1234567890123 plz 12345678901234 seprate 1' history from dual union all select 2 stsid, '123456789 here 1234567890 is 12345678901 some 123456789012 data 1234567890123 plz 12345678901234 seprate 1' history from dual ) -- -- select stsid, regexp_substr (history, '\w+', 1, level) history from sts_history where rtrim (regexp_substr (history, '\w+', 1, level), '0123456789') is null and length (regexp_substr (history, '\w+', 1, level)) >= 10 connect by level <= length (history) - length (replace (history, ' ')) and prior stsid = stsid and prior sys_guid () is not null / STSID HISTORY --------------- --------------- 1 1234567890 1 12345678901 1 123456789012 1 1234567890123 1 12345678901234 2 1234567890 2 12345678901 2 123456789012 2 1234567890123 2 12345678901234 10 rows selected.
-
Cannot enter numeric values in the Smartview 9.3.1.5 Options
I have a user using Excel 2007 and Smartview 9.3.1.5.
In the options of smartview, on the view tab, there is a box "#NoData/Missing Label. In older versions of smartview, we were able to enter a 0 in this area. However, this version will not let us a numeric value. As a work-around, I went into the registry and change the value to 0, but if the user opens the options screen smartview will remove this parameter. Clues on how to fix this permenantly?If you enable the option send zero, it still happens? This is a new feature on the display tables
Improvements of #NumericZero
To display a zero digital instead an error message, you can enter #NumericZero in one of the three fields of alternative text. When you use the #NumericZero option:
· Excel formatting of the cell is preserved.
· All calculations with dependence on the cell will calculate correctly and take the value of this cell to zero.
· This digital zero is for display only. When you submit, the value zero is NOT subject to the data source.
You cannot set the display strings of cells containing a name member or the invalid dimension (metadata error). Metadata errors result standard descriptive error messages.
Errors are priority in the following order, from the highest to the lowest. The error message for an error of higher priority takes precedence over that for a lower priority level error.
1 (Highest) metadata errors
Access 2. #No
3. #Invalid / sense
4. #No data\Missing
-
Changing numeric value in the advanced search datafinder range
I try to use the Datafinder advanced search to get all files with a certain value in the amplitude channel. I'm trying to do it by searching for the name of the channel = Amplitude and maximum track = number. For some reason, maximum has a range of values of 1 to 1, and this impedes my ability to research. When I try to look for another value out of reach, say Amplitude = 0.2, I get no results. Is it possible that I can lift the restriction of the value or go around another way?
I have attached a screengrab of research I am conducting, but also an example of data .tdms file.
See you soon,.
Ellie
Hi Ellie,
The file DDHN you posted doesn't have one Maximum or Minimum property registered in the channel ' entry/Amplitude voltage settings' (or another). If you resave this tiara channel, it will be, but you must decide the best way to automatically fill properties. The DataFinder cannot query a property whose value is defined on NoValue.
What is confusing about this scenario, is that the tiara automatically calculates the properties Maximum and Minimum for each channel that is loaded in the data portal, it seems that these properties have values - when you load them in DIAdem, they do it. But if you look at the table of properties DataFinder, according to Eva, you will see that the values are all NoValue.
Here is a white paper that talks about a number of subjects like this:
http://www.NI.com/white-paper/14252/en/
Brad Turpin
Tiara Product Support Engineer
National Instruments
-
I can't save the numeric values in the table
When I close the program and run it again, all the values in the array are initialized to zero. I want to have the same previous values that I entered the table before.
Thanks for your help!
"' If you still want the same values at the beginning, simply enter all the values in the controls, the ' edit..make the current default values. Save the VI.
-
[I ask nicely for a few comments for this question.
Someone else can reproduce it with the test below?
Is my code invalid or false?
Or what is the problem here?
-Thank you
Frank
]
Hello
Oracle Database 11 g Enterprise Edition Release 11.2.0.3.0 - 64 bit Production
PL/SQL Release 11.2.0.3.0 - Production
CORE Production 11.2.0.3.0
AMT for Linux: Version 11.2.0.3.0 - Production
NLSRTL Version 11.2.0.3.0 - Production
Trigger Before Insert or Update to a table, I invoke a PL/SQL package function to check the size of an xmltype column (passing as IN OUT NOCOPY).
PL/SQL functions retrieves the xmltype. GetClobVal(), check its size, and when it is beyond a limit, he tries to insert the data into another table (GTT - global temporary table).
Finally, it changes the value of the value of the column of xmltype to the shorter XML (just by referring to the corresponding record in the TWG).
But the Insert SQL in the TWG operation strike ORA-22993: specified input is greater than the amount actual source.
I don't know why this happens. In the internet I only find references on importing files in lob/clob.
Anyone have the same problem?
I know that you prefer to have a sample program to demonstrate the problem - I'll try to post one, but it will take time.
But maybe someone can help me based on the information above already.
-Thanks a lot!
Best regards
Frank
I have reproduced the issue.
It must be a bug.
Maybe you are looking for
-
Blockages of Safari - not loaded Web content
Hello My Safari loads web pages. It opens briefly and crashes. Yahoo, Google and others do not work. Here is the error message. MacBook Pro 15 inch, early 2011, Running OS X 10.11.4, Safari version 9.1 Help, please! Process: com.apple.WebKit.WebCon
-
Satellite L550-1CC does not illuminate
HI -. I got this laptop for 3 years and never had any problems at all.However last night he would have any lights. I searched on the net and the various sites to find of assistance, and I did everything suggested... take the power cord, taking the ba
-
Windows 7 Photosmart 6520 How can I get to the screen to insert the DNS settings? Wireless network printer continues to fall.
-
Printer HP C310 and Google Cloud Print problems
I use a Chromebook with a printer C310 and Google Cloud Print. The print dialog does not multiple copies. Additinally, the print dialog box provides to specify which pages in a given document to print, but still don't know, all pages printed on a doc
-
How will I receive the image? It's in the mail for me?
I want this picture so that I can get a great canvas for my kitchen. Once I have purchansed, is it sent to me?