Need to find installers DAQmx and LabVIEW. Lost installation CD.
I have LabVIEW full edition and the Application Builder. I am trying to build a stand-alone application with the application builder and I need the following additional installers:
OR LabVIEW Run-Time Engine 2010
NOR-DAQmx Base Runtime 9.1.5
I lost my CD to install LabVIEW 2010. These installers are available on the Web? I tried without success. Thank you for your help.
RogerK wrote:
I have LabVIEW full edition and the Application Builder. I am trying to build a stand-alone application with the application builder and I need the following additional installers:
OR LabVIEW Run-Time Engine 2010
NOR-DAQmx Base Runtime 9.1.5
I lost my CD to install LabVIEW 2010. These installers are available on the Web? I tried without success. Thank you for your help.
Hello
You can download the run time of the website NOR, as also the DAQmx
LabVIEW:
2010SP1
http://Joule.NI.com/nidu/CDs/view/p/ID/2292/lang/en
2010 min 32 bits
http://Joule.NI.com/nidu/CDs/view/p/ID/2088/lang/en
2010 standard
http://Joule.NI.com/nidu/CDs/view/p/ID/2087/lang/en
DAQmx Base:
9.5.1
http://Joule.NI.com/nidu/CDs/view/p/ID/2934/lang/en
9.1.7
http://Joule.NI.com/nidu/CDs/view/p/ID/2206/lang/en
Just search in blogs or any time of the performance you need.
You can even download drivers daqmx if needed
http://Joule.NI.com/nidu/CDs/view/p/ID/2934/lang/en
Tags: NI Software
Similar Questions
-
I need power find/use Java and the control panel Java to use some software open source.
There is no way to get to the Java Control Panel. Where is it, and why you did so difficult to use computers?
If you have not downloaded java, you will need to download, install it. It can only be downloaded, installed and run desktop t5he - not from the beginning. Then you should find it in the control panel. Hope this helps and if you need another post to help and we will be happy to help you.
The above opinion is mine and mine nothing and does not necessarily reflect that of Microsoft, it is
employees, or any other Member of this forum.
"When we try to take anything by itself, we find it hitched to everything else in the universe." -John Muir
-
I trying to get adobe Photoshop cs6, but with Adobe pushing the creative cloud, can I still get the program from the Web site? If not, where would be the best place to buy it?
Adobe still sells CS6 via their website, but they made the page very, very hard to find for non insiders:
See Creative Suite 6
-
LabVIEW 8 do not find basic DAQmx live.
My computer died and I got a new and loading of the NOR-DAQmx and Labview 8 worm 7.4 but my old programs, and even examples of Labview can not find basic VI modules as 'create virtual channel '. It seems as Labview does not know where to look to find these basic elements. I am running Windows XP Professional on your computer.
Hi Gary.
NOR-DAQmx 7.4 is not supported with LabVIEW 8.0. See the following knowledge base:
NOR-DAQ and LabVIEW (for Windows) version compatibility
http://digital.NI.com/public.nsf/allkb/B0D5630C0A50D5C6862578E800459248
This is also mentioned in the readme file for the driver NOR-DAQmx 7.4:
http://Joule.NI.com/nidu/CDs/view/p/ID/337/lang/da
If you use a LabVIEW 8.0, you must install the driver NOR-DAQmx 8.7.1, which is the last driver that works with LabVIEW 8.0:
http://Joule.NI.com/nidu/CDs/view/p/ID/965/lang/da
Let me know if this solves the problem.
-
How to measure the angular velocity, the angle and trigger using a gyroscopic sensor breakout board and LabView data acquisition?
There is a single channel data acquisition code which measures the angular velocity, angle and flexibility using a gyroscopic sensor breakout board and acquisition of LabView data attached to this, I need a help to creat two-channel data acquisition code?
Hello
Attached is a vi that you can use in order to read the measured angular position of an encoder.
If you need more examples on the tasks that you can develop with NOR-DAQmx and LabVIEW, you just need to open LabVIEW and click Help > find examples > Input and Output material > DAQmx > entry counter.
Kind regards
-
No screws daqmx in labview 2014 64 bit
Hello
I have daqmx 14.0 installed on my Win 64 bit PC and LabVIEW 2014 SP1 32 bit. Today I installed LV 2014 64-bit on my PC and I don't see any DaqMX screws under the section i/o measure. And when I opened my project compiled in 32-bit LV 2014 then computing begins looking for screws DaqMX and I point it to "C:\Program Files (x 86) \National 2014\vi.lib\DAQmx" but the daqmx vis are broken.
When I click on the run button broken, the error list displays 2 errors:
(1) VI couldn't carpule
(2) external component or missing driver
It seems that I need to install special drivers for daqmx, so I downloaded daqmx 14.5 of the or site and during installation when it asks the path is by default "C:\Program Files (x 86) \National" but I changed it to "C:\Program File\National Instruments\" and the installation program gave an error message that I can't install the 32-bit files in 64-bit folder.
How to solve this error?
Thank you
Ritesh
LVCoder wrote:
So should I just uninstall daqmx from my PC and re-install again. or do I uninstall labview and daqmx together and then install daqmx and labview?
Reinstall everything DAQmx. It will install only the parts you need, in this case, it should just be support for LabVIEW.
-
I don't have a Vi DAQmx in LabVIEW
Hi all
I recently downloaded Labview 8.5 on my computer (free student version). I also installed the Driver nor-DAQmx hardware to the computer and the acquisition card (BNC-2120).
Everything works fine. Only, I would use DAQmx Labview Vis and I can't find them.
Is there a reason? How can I find/download them?
Thanks for your help.
Alexandra
Do you have what DAQmx version installed? It seems that the latest DAQmx version that will work with LabVIEW 8.5 is DAQmx 9.3. If you have installed something more recent, it will not work with LabVIEW 8.5.
-
I just install an update of Adobe Reader and find now that I've lost all screen savers. Please can someone explain how I can get them all back!
Hello
try a restore of the system before this happened
http://www.windowsvistauserguide.com/system_restore.htm
If necessary do in safe mode
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
- Select the Safe Mode option with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
-
My computer crashed and I lost all my program files. Data files have been backed up.
I now need to redownload Acrobat v. 11. How can I do this? For several years, I think I made this purchase and downloaded the program.
Download from Download Adobe Acrobat products. Standard, Pro | DC, XI, X
Install and enter your serial number.
If you don't know your serial number, try to find the serial number of your product Adobe quickly
-
DAqmx and IMAQ pallets do not appear in my palettes of LabVIEW 2011
Hello
I use LabVIEW to my University via a Campus license since 2005. I installed it on several computers.
My problem is related to a new LabVIEW installation on a brand new computer.
I have the license Site LAbVIEW 2011 Academic just installed and validated (via the License Manager) in this new machine running 64-bit Windows Seven.
[I also installed the DAQmx and the "distribution of February 2011" IMAQ drivers (downloaded from OR) as well as the NI Vision Software (version for LabVIEW 2011, the same distribution as the LabVIEW 2011).]
I launched LabVIEW Ant checked to see if everything was there, specifically the DAQmx and IMAQ functions, since I have the cards OR to make the acquisition of data and images. Note that I have not yet installed these cards in the PC. I m going to do only when I would have ensured that all the software is ok.
The subpalette DAQmx in measurement of i/o functions palette is missing.
Also, if I'm looking for the NI-IMAQ subpalettes in the range of Vision and movement functions they also lack.
Notice that all other subpalettes in the range of functions of Vision and movement are OK and there appear (utility of Vision, Image Processing, Machine Vision, and Vision Express).
Then, I checked if the installed drivers are really there. For this I used the MAX or (measure explore), and it looks like it all everything is there.
I mean, under NI MAX > my system > software I can see these articles:
NEITHER Vision TERM 2011
NOR-IMAQ 4.5
NOR-DAQmx... several entries
I checked if the forum or knowledge base in NOR have any clue on what to do, and I found somewhere by the idea of trying to fix the installation via the Windows 7 Control Panel > programs and resources > OR software. I did this procedure twice, just in case...
I also tried to remove and reinstall all software (including drivers) and NO, I did it twice. The result is always the same.
Any suggestions?
When you install the drivers, you include support for LabVIEW 2011? If this isn't the case, you won't see the LabVIEW screw in your palettes even if the software is installed. Normally I expect that the Setup program automatically adds this support, but he can't do it, especially if you have installed the drivers before installing LabVIEW. See the image below:
-
folder and transfer contects
Some used body my e-mail and now I have to create a new account. I lost all my folders and files all my contects.is there anyway I can find my file and contects and transfer them to my e.mail new address, I am one who is suffring now .i should add every thing from the bigning.i had this acct almost 10 years.If you use Outlook Express, then locate the *.wab computer. If this is not the case, then you must be specific to the subject what email program you use, and what form of e-mail account you have and what operating system you are using, as your questions depend on this, and we have no idea if not.
Steve
-
I have a seuillee image and I need to find the actual surface of the black region
I have a seuillee image and I need to find the true field of the black region.iam new view.please guide me.i lab joined the image...
-
which should I do when I can't read the tag product key on the back of the laptop?
I can't read my tag of product key on the back of the laptop and I lost my drive there, and my computer tells me I need to validate to make sure that it's a genuine windows and I know that it is. Whenever I have validate, it stays on the screen never validation and doesn't change at all, even for half an hour or an hour, that it remains the same. someone will please understand this and help me...Hello
As you have lost the product key of the Tower, you will need to contact the manufacturer of your computer.
Ask them to send you a set of recovery disc for your model computer reinstall the operating system to how it was when new.
The relocation method preceding normally does not require allows you to provide a product key during Installation, the recovery process uses the Installation product key factory to activate automatically during the resettlement process.
"How to replace Microsoft software or hardware, order service packs and replace product manuals.
http://support.Microsoft.com/kb/326246
See you soon.
-
XP and have lost all my photos/videos - cannot find anywhere (help) grateful suggestions
Hello
1 did you changes to the computer before the show?
You can open the Recycle Bin and check if the deleted files are present.
For more information, see:
To remove or restore files in the Recycle Bin
In the case where you cannot find the files in the Recycle Bin, you can download a third-party data recovery tool using your favorite search engine.
Note:
With the help of third parties Party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.
-
HP pavilion dv6-6150sl and I need to find drivers
Hi, I bought a hp pavilion dv6-6150sl and I need to find the drivers for it, can someone please help me thank you, im using win7 64 bit
All the drivers for your model that are compatible with Windows 7 64-bit can be downloaded from the following link:
Maybe you are looking for
-
Tecra M5 - cannot install Intel graphics driver 945GM
Hello A few days ago, I bought a Tecra M5 opportunity.When I received it, the HARD drive has been formatted and I had no CD with drivers from the laptop.So after a while, I found most of the drivers I need... only the driver for the Intel 945GM does
-
Satellite P series would not power up until the battery is replaced
Somebody has got this problem because it's the second laptop I have Toshiba with the same problem... Sometimes it does not fuel the good I have the ca card until I remove the battery then replace and then it will fit on... Any ideas please?
-
BSOD X 1 carbon 20BS: Driver_Power_State_Failure
I hope someone on this forum can help me solve this problem. I have a X 1 carbon with a pure 20BS install 8.1 Windows 64-bit with all the drivers of reserve facility using the Lenovo system update tool. The problem I encounter is that the blue of the
-
C:\WINDOWS\SYSTEM\VMM32 file is damaged on the Windows ME startup
Original title: C:\WINDOWS\SYSTEM\VMM32 I'm after start on my spare charge of problems with Windows ME computer, and now starting will not continue beyond a message which States that the following file is corrupted C:\WINDOWS\SYTEM\VMM32. Also, I don
-
"Windows Media Player cannot burn the files to CD" error while burning a CD
My Windows Media Player says "Windows Media Player cannot burn the files to the CD. Check that the disc is clean and not damaged. If necessary, select a slower recording speed or try a different brand of blank discs. I have burned several CD from Wi