Need to get the original values

Similar Questions

• Need to get the last value of the quarter

  Hi expert,
  
  I have data like this
  
  Amount DATE column column
  
  January $1 20
  
  |
  
  January 30, $50
  
  
  Fed 60 1
  |
  
  February 28, $80
  
  like that throughout the year
  
  
  I will provide the first promt and selects the 1st quarter. Then, it will show you Jan, Feb, March in the Date column and the respective amounts in the amount column.
  
  I need to put a formula into the amount column... So that I get the last day of the amonut of quarter.
  
  
  Any help is appreciated.
  
  Thank you
  V
  
  Published by: Vincent Krishna on May 25, 2011 06:43

  CASES WHERE 'Fiscal Date' = TIMESTAMPADD (SQL_TSI_DAY, TIMESTAMPADD (1), (SQL_TSI_QUARTER, 1, TIMESTAMPADD (SQL_TSI_DAY, DAY_OF_QUARTER (CURRENT_DATE) *-(1) CURRENT_DATE + 1))) THEN 'Fact - amount' END;

  Apply the filter above on your amount column.

  Thank you
  -Laurence.

• Get the current value of a control of the ring

  

  I have a control of the ring that has the following values. See attacment. I need to get the current value of this one and use it as input for another function, but First I would like to get the current value and save ina text file. I tried this

  if (event == EVENT_LEFT_CLICK_UP) || (event == EVENT_LEFT_CLICK_DOWN)
  {
      int p;
      GetCtrlVal (panelHandle, PANEL_RINGSLIDE_1, &p);
      FILE *OutFile = fopen("C:\\Users\\Student\\Desktop\\ringtest.txt","w");
      fprintf(OutFile,p);
      fclose(OutFile);
  
  }
  

  I need to get the current value of the ring (& p) to write to the file ringtest.txt.

  Also, I need to use this value (& p) as another entry in the same program.

  IE value of & p must be used in

  b = c * 5; where c is the value of the current & p.

  Can any 1 help?

  You're right: EVENT_LEFT_CLICK_DOWN is not a valid event for the CVI. Valid events are listed in the userint.h file, and are the only events that can be caught in the trap in a point of order. On the other hand, you're assuption on EVENT_VAL_CHANGED is correct: you can trap forget the EVENT_CLICK_UP event.

  According to the second question, looking at the definition for fprintf you must pass a string format as the second parameter to the function, then the value to write to the file. In your case, the correct syntax is:

  fprintf (OutFile, "%d", p);

• get the new value to select a radio station by ValueChangeListener Bean

  ADF / JDeveloper11g
  
  Hi Experts,
  
  Please help what I'm working on one Radio select and populated with a value of VO. I need to get the new value selected by ValueChangeListener Bean. the code as follows. Copy the following code I am old value, but I need to develop some new and current.
  
  Please help, its urgency.
  

    public void SlRadio(ValueChangeEvent valueChangeEvent) {
      getBranch();
    }

    public void getBranch() {
      // Add event code here...
  
      DCBindingContainer dcBindings =
        (DCBindingContainer)BindingContext.getCurrent().getCurrentBindingsEntry();
  
      // Get a attribute value of the current row of iterator
      DCIteratorBinding iterBind =
        (DCIteratorBinding)dcBindings.get("VOUserBranchList1Iterator");
      String vRtno = (String)iterBind.getCurrentRow().getAttribute("RtNo");
  
      setRtno(vRtno);
      System.out.println("=========Rtng========" + Rtno);
    }

  Thank you.
  Zed
  ======

  Hi Zaza,

  As you are able to get the index of the current selected option button, try upward with the selection of the value of the view object using the index you have found as

  If (valueChangeEvent.getNewValue ()! = null)
  {
  selectIndex = int ((Integer) valueChangeEvent.getNewValue ()) .intValue ();
  Line selectedRow = AMImpl.getVO1 () .getRowAtRangeIndex (selectIndex);
  If (selectedRow! = null)
  {
  selectValue = (String) selectedRow.getAttribute ("RtNo");
  }
  }

  where AMImpl is the object of the application module class.

  Kind regards
  Vikram

• Get the selected value in the list drop-down/messagechoice

  Hi friends,
  App R12.
  I create a drop-down list programmatically in the process request:
  
  OAMessageChoiceBean OAMC = oapagecontext.getWebBeanFactory () .createWebBean (OAWebBeanConstants.MESSAGE_CHOICE_BEAN, null, oapagecontext, null) (OAMessageChoiceBean);
  
  oamc.setPickListViewUsageName ("MyVO1");
  oamc.setListValueAttribute ("MyId");
  oamc.setListDisplayAttribute ("MyDescription");
  oamc.setID ("xxMypicklist");
  oamc.setRendered (Boolean.TRUE);
  oawebbean.addIndexedChild (oamc);
  
  This shows the list of choices and there MyVO1 query search results.
  
  Now, I want retrieve value MyId in the processFromRequest (after pushing a button on the screen). I do the following:
  
  OAApplicationModule am = pageContext.getApplicationModule (webBean);
  ...
  MyVOImpl myvoimpl = (MyVOImpl) am.findViewObject("MyVO1");
  MyVORowImpl PicklistRow = myvoimpl.getCurrentRow ((MyVORowImpl));
  NUMBER auxId = (NUMBER) PicklistRow.getAttribute ("MyId"); THIS SENTENCE GIVES A NULL POINTER EXCEPTION
  
  Then..., is not enough to find the original Version? and get the rank "perceive"... and then get the desired attribute?
  
  Do I need to load data from MyVO1 into myvoimpl? How? How to get the folder selected on the screen?
  
  Many thanks for any help. It is very urgent for me to solve this problem. Dev guide does not help with this kind of usual problems.
  Jose L.

  Hello

  u can not get the value of this way, becz you try to get the value of the original Version which is used for bean of choice message, to get the value selected in this field of choicebean message, you must get the VO initialized for this page, both would be different VO, you can opt for the following approach

  (1.) an another VO wiil be there in your page get implemented to capture the data on this page, the attribute of this VO would be added to your field of beans of choice, need to understand that VO and and capture your selected value.

  or the other way is

  2.), you can change your code in the same way in the pR method

  OAMessageChoiceBean OAMC = oapagecontext.getWebBeanFactory () .createWebBean (oapagecontext, OAWebBeanConstants.MESSAGE_CHOICE_BEAN, null, "XXMypicklistBean) (OAMessageChoiceBean);

  and get the selected value in pFR method in this way

  OAMessageChoiceBean getCHBean = (OAMessageChoiceBean) (webBean.findIndexedChildRecursive ("XXMypicklistBean"));

  String val = (String) getCHBean.getValue (pageContext));

  thanx

  Pratap

• How can I get the original Yosemite Setup program to reinstall?

  I need to install Yosemite on my Mac and have not been able to get the original installation file. How can I get?

  If you have previously from the Mac App Store, sign in with the same Apple ID and click the purchases tab. If this is not the case, go to a physical store of Apple and ask.

  (142534)

• Where does FireFox get the default value for a preference of. What is the format of the file that contains the default value?

  Where does FireFox get the default value for a preference of. What is the format of the file that contains the default value? I need the actual default value for an individual preference.
  Topic: config shows some default values, but I need the source from which everything: config returns to the default value.
  Any help in this direction is greatly appreciated.

  User Agent

  Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Win64; x 64; Trident/4.0; .NET CLR 2.0.50727; SLCC2; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0)

  The preferences that are not hidden if they have by default are stored in two JavaScript text files in the Firefox program folder
  You can open them in a tab in Firefox through these links:
  resource:///defaults/pref/firefox.js
resource:///greprefs/all.js


  (702598/forum/1/702598)

• Get the Max values and average of the different cycles in the single channel

  Hello

  I'm trying to get the Max values and average of the single channel that has different cycles it contains. I tried to use commands such as Chnclasspeak3 and chnpeakfind, but they were not useful for me. What I need is the Max values and average of the different cycles numbers saved in the data channel.

  Exampld if the string contains 5 numbers of repetitive cycles, then we must find the maximum values and the average of these 5 cycles in the single channel. Attached reference data. This is the .raw file and I have the plugin for it to use in diadem 11.1.

  Kind regards

  X. Ignatius

  Hello, Ignatius,.

  Sorry, it took some time to provide a replacement based on the script for the function. Please take a look at the attached script. I changed the script to use my function if the tiara-version is less than 12. My script function is not as fast and more stable than the implementation of tiara, but for now, it does the job

  Andreas

• Get the highest value of acquired data

  Hi, how can I get the highest value of data according to data acquired using the accelerometer ADXL345 and LINX in LabVIEW?

  I want the highest data to be shown with a flag. However, the data being shown are always the last acquired data. My problem would be what happens if the highest data somewhere at the beginning or in the middle of all the acquired data? How to display the highest data using an indicator?

  Here's a look at my front, block diagram, and sample of the acquired data.

  

  

  

  From the front panel, the basic indicator of detected last poster 0.1929 (amplitude), which is the last value. But looking at the Excel file, the highest data are data which is 0.2013. The highest, I want to be displayed on the indicator not the last value. How do I do that?

  Thank you!

  I gave you an example of what you need to do - it is not okay if wire you the new value and the old value for the X or Y - it will always return the maximum of the two values so the order doesn't matter. It would have been more useful if you had posted what you tried the max & min. You need a registry to offset inside the loop (like I did with my while loop). If you only want to display the maximum value for each iteration of the loop for external, you must initialize the shift register by plugging a 0 to its terminal on the left. A shift register her pinned the value of the last run - probably not what you want here.

• I need to get the factory setting

  Dear brothers,

  I need to learn how can I reset my DESIRE m6 dx1105 to the factory setting that include Win8 with all software and the original drivers.

  I faced a major problem which made me have to format the system and install the new Win8.1

  You know, I lost the hp logo when starting the laptop.

  There are a few problems with some software like software Cyberlink PhotoDirector, who refuses to be installed because my laptop is not allowed machine!

  I need to get the year ago as before factory setting, I bought the laptop!

  Thanks for your help.

  Hello

  According to this page specifications (http://support.hp.com/us-en/document/c03489385 , your laptop came with ' Standard/Core/Basic edition' of Windows 8 64-bit.)

  Only 4 editions exist for Windows 8-

  Standard-Basic-basic
  RT
  Enterprise
  Professional

  Related: http://en.m.wikipedia.org/wiki/Windows_8_editions

  There is no need to buy a new installation of Windows 8 for reinstallation disc
  It will cost you money & also it would contain a different set of product key that should be used in another system, also when you purchase the installation disk of retail sales that it may not work with your system, as it is not an OEM installation media & product key would be retail

  8 Windows laptop product key is encrypted in the BIOS of the laptop chip in the motherboard, would automatically activate the OEM of Windows 8 when installing.

  You can do your own installation of Windows 8 OEM media ordinary from another computer if you have access:

  Link to the 8 x 64 ISO of Windows file, download, save it to a known location on the system.

  https://docs.Google.com/file/d/0B0W9PBigPy94aVJWSndyTFNFMzg/edit?PLI=1

  After you download the file, use this tool to make the file on a flash USB 4 GB or DVD drive bootable.
  The tool works for Windows 8 too-

  http://www.microsoftstore.com/store/msusa/HTML/pbPage.Help_Win7_usbdvd_dwnTool

  Note:
  When you click on the link to the iso file, sometimes you may get this message:

  "Sorry, you can't view or download this file at this time.
  Too many users have seen or this file downloaded recently. Please try to access to the file again later. If the file you are trying to access is particularly important or is shared with many people, it may take up to 24 hours to be able to view or download the file. If you can not access a file after 24 hours, contact your domain administrator. »

  As the message says you can try again later or tomorrow. Must try several times until you get to download it - has a daily download limit.

  After making the bootable install OEM Windows 8 x 64 support, simply start your system when booting from it & installing,

  Note:
  What you will do here is a new Installation & installation media will not contain the programs, software, provided drivers with your laptop when you bought it,

  You could download the drivers from your product download page & save on another Flash/USB drive and run the configuration file after you have installed Windows 8 successfully in your system.
  Drivers download site: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4132&lc=en&cc=us&dlc=en&sw_lang=&product=5312254

  Kind regards

  Visruth

• Get the date value. MinValue and insert it into the DB

  Hello

  I'm developing an adf application using jdev11g.

  I need to recover the 3 values of page jsf (inputText 2 + 1 date. MinValue) and insert them into DB

  so I create a method in appModuleImpl:

  {public createAffAgVehNewRow (Date date, around km, veh Integer) Sub

  Get the id of the current user

  String ag = ADFContext.getCurrent () .getSessionScope ().get("idAg").toString ();

  getSequenceNumber

  oracle.jbo.domain.Number seq = new oracle.jbo.domain.Number (0);

  SequenceImpl seqImpl = new SequenceImpl ("AFF_AV_SEQ", getDBTransaction());

  SEQ = seqImpl.getSequenceNumber ();

  Insert values into the DB table

  Line r = getAffAgVehView1 () .createRow ();

  ViewObjectImpl vo = this.getAffAgVehView1 ();

  r.setAttribute ("IdAg", Integer.parseInt (ag.toString ()) ");

  r.setAttribute ("IdAffAv", seq);

  r.setAttribute ("KmDep", km);

  r.setAttribute ("IdVeh", veh);

  r.setAttribute ("DateAff", date);

  r.setAttribute ("KmArriv", null);

  r.setAttribute ("ConsoCarb", null);

  vo.insertRow (r);

  this.getDBTransaction () .commit ();

  }

  also, I changed the default value of the EO (AffAgVeh) to adf.currentDate () and the user interface as simpleDate format: "MM/DD/YYYY.

  the problem as whene I enter 3 inputValues and click on the button I get this message:

  Timestamp format must be yyyy-mm-dd hh: mm: [.fffffffff]

  someone knows how to solve this problem

  Thank you

  Mark

  Hi Dev

  Please pass.

  java.sql.SQLException: column type invalid in the adf

  Thank you

  Subramanian M

• Getting the closest value output

  I have the table as below

  with t as)

  Select 1 n double union

  Select 2.71 double Union

  Select 2.72 double Union

  Select 3 from dual union

  Select 4 double)

  Select * from t

  I have the input as 2 value. As there is no such thing as value 2 in my table, I ve to choose the nearest value max exists in my table.

  From the above table, I need to get the result as 2.71 only.

  Could you please suggest the same thing.

  Thank you.

  variable number of val

  exec: val: = 2;

  with t as)

  Select 1 n double union

  Select 2.71 double Union

  Select 2.72 double Union

  Select 3 from dual union

  Select 4 double

  ),

  x as)

  Select n,

  Rank() over (order of abs (n -: val)) rn

  t

  )

  Select n

  x

  where rn = 1

  /

  N
  ----------
  2.71

  SQL >

  SY.

• To get the old value and the new value

  create table test (ID NUMBER,
  Number of REV,
  Number FIELD_ID,
  FieldName varchar2 (200),
  ACTION varchar2 (50).
  Field_value varchar2 (200),
  MODIFIED_BY varchar2 (50).
  Date MODIFIED_DATE);
  
  Insert into TEST (ID, REV, FIELD_ID, FIELD_NAME, ACTION, FIELD_VALUE, MODIFIED_BY, MODIFIED_DATE) values (1007,283,12,'status','UPDATE','Started','2002',to_date('13-DEC-13','DD-MON-RR'));
  Insert into TEST (ID, REV, FIELD_ID, FIELD_NAME, ACTION, FIELD_VALUE, MODIFIED_BY, MODIFIED_DATE) values (1007,224,12,'status','UPDATE','preview','2002',to_date('12-DEC-13','DD-MON-RR'));
  Insert into TEST (ID, REV, FIELD_ID, FIELD_NAME, ACTION, FIELD_VALUE, MODIFIED_BY, MODIFIED_DATE) values (1007,290,12,'status','UPDATE','revision','2002',to_date('14-DEC-13','DD-MON-RR'));

  
  Insert into TEST (ID, REV, FIELD_ID, FIELD_NAME, ACTION, FIELD_VALUE, MODIFIED_BY, MODIFIED_DATE) values (1008,283,12,'status','UPDATE','Started','2002',to_date('13-DEC-13','DD-MON-RR'));
  Insert into TEST (ID, REV, FIELD_ID, FIELD_NAME, ACTION, FIELD_VALUE, MODIFIED_BY, MODIFIED_DATE) values (1008,224,12,'status','UPDATE','preview','2002',to_date('12-DEC-13','DD-MON-RR'));
  Insert into TEST (ID, REV, FIELD_ID, FIELD_NAME, ACTION, FIELD_VALUE, MODIFIED_BY, MODIFIED_DATE) values (1008,290,12,'status','UPDATE','teststat','2002',to_date('14-DEC-13','DD-MON-RR'));

  1007 283 12 status of started the UPDATE 2002 13 December 13
  1007 224 12 status update overview 2002 12 December 13
  12 290 1007 State review UPDATED 2002 December 14, 13
  1008 283 12 status of started the UPDATE 2002 13 December 13
  1008 224 12 status update overview 2002 12 December 13
  1008 290 12 intensified status 2002 Update December 14, 13

  I need to Get for each id for each field Ineed to get the old value and new_value.

  
  Planned result for the simulacrum of the data is:

  ID FIELD_NAME ACTION OLD_FIELD_VALUE NEW_FIELD_VALUE MODIFIED_BY MODIFIED_DATE
  1007 status UPDATE started review 2002 December 14, 13
  1008 State updated started intensified 2002 December 14, 13

  
  Thank you
  Ann

  Hello

  9728f65c-CE79-4c28-9efb-9e76dc6eaf8b wrote:

  Yes I need a production line for all id.the the last rows should be the one with the highest rev.

  Then use id where I guessed a group of columns starting with id and rev in most of the places where I used modifed_date:

  WITH got_analytics AS

  (

  SELECT id, field_name, action

  LAG (field_value) over (PARTITION BY ID.

  ORDER BY rev

  ) AS old_field_value

  field_value AS new_field_value

  modified_by

  modified_date

  rev

  MAX (rev) over (PARTITION BY id)

  AS max_rev

  OF the test

  )

  SELECT id, field_name, old_field_value, new_field_value, modified_by, modified_date

  OF got_analytics

  WHERE rev = max_rev

  ORDER BY id

  ;

• Exception while trying to get the selected value for the choice of SelectOne in ADF Mobile

  I added the following code after arriving through this post https://forums.oracle.com/thread/2536419

  DCBindingContainer dcBindings = (DCBindingContainer) BindingContext.getCurrent () .getCurrentBindingsEntry ();

  DCIteratorBinding iterBind = (DCIteratorBinding) dcBindings.get ("facilitySelectItems");

  Attribute String = (String) iterBind.getCurrentRow () .getAttribute (0);

  But Jdeveloper complained class BindingContext wasn't available and I get the jar file adfm.jar has not been added to the project. I added it manually the path C:\JDeveloper11r24\oracle_common\modules\oracle.adf.model_11.1.1\adfm.jar. Once I've deployed code on an android emulator, I get the below error. Can someone please?

  07-25 13:18:03.812: D/CordovaLog (869): [SEVERE - oracle.adfmf.framework - adf.mf.internal - logError] request: {classname: oracle.adfmf.framework.api.Model; method: evaluateMethodExpression; params: [0: #{pageFlowScope.IBCMSearchBean.getSearchParams}] [1:] [2: {}] [3:] ;} exception: {message: oracle/adf/model/binding/DCBindingContainer (unsupported major.minor version 50.0); the severity: ERROR; .Guy: oracle.adfmf.framework.exception.AdfException; .exception: true ;}}}

  The version of the compiler maximum the JDev shows that 1.4. And I'm using version 11.1.2.4.0 for JDeveloper. The JDK version is 1.6.0_24.

  Sorry I missed the question!

  First of all, to get the value of selectedItem in selectOneChoice do not have another function in the domain controller. Here is an excellent article by Frank that explains this. Or you can use the below function to get the selected value immediately. Here the market is the value of selectOneChoice attribute. I wasn't aware of this method until you have read this article.

  {} public void getAndSetMarketValue (market of the object)

  ValueExpression ve = (ValueExpression) AdfmfJavaUtilities.getValueExpression ("#{bindings.marketSelectItems}", Object.class);

  AmxAttributeBinding attrBinding = (AmxAttributeBinding) ve.getValue (AdfmfJavaUtilities.getAdfELContext ());

  access the iterator that populates the list of values in

  the selectManyChoice component

  AmxIteratorBinding amxListIterator = attrBinding.getIteratorBinding ();

  the AmxIteratorBinding is a wrapper for the BasicIterator

  iterator which sets out the information we need

  ListIterator BasicIterator = amxListIterator.getIterator ();

  for each index value, query the name of the service (you can

  access and attribute from the line) to display

  SelectedValue = string

  (String) listIterator.getAttributeValueAtIndex (((New Integer ((String) market))) .intValue (), "Value");

  }

  Second, you can use #{row} in commandLink's action since it is something that is evaluated when the user clicks on the link and we do not have access to #{line} after that the entire component is rendered. To remedy this give an action for the commandlink which is a function in the bean and the function of bean back to the action of the link selected.

  ListOfReports.amx

  .......

  .......

  LoginBean.java

  ......

  public String returnClickValue() {}

  Option of string = AdfmfJavaUtilities.evaluateELExpression("#{viewScope.selectedItem}").toString ();

  return option;

  }

  ......

• Access to the original value of a property before you apply an expression

  I have a layer that has an expression applied to the Position. The expression overrides the value of Position over time. I want to do is access the Position value as if she had no expression applied. The property("Position").value method does not work because it takes current Position which is influenced by the expression value. What I need is the original value. Is it possible to achieve this?

  You try to do it with a script or an expression?

  With a script, you use just.valueAtTime(time,preExpression) with preExpression set to true;

  It's more complicated with an expression but, if the value of the expression is static, you can use "negative time. In the expression, you do something like this:

  If (time<>

  value

  } else {}

  your actual expression goes here

  }

  Then your other expression could do something like this:

  your_property.valueAtTime(-1)

  If the value of the expression is not static, it's a little more complicated, but you can always do.

  Dan