Need to maintain the icon in line with end of line to write on behavior

Similar Questions

• have the icon showing safari with webloc under him when I close safari.  have never seen this before.  What is it?

  When I close safari, I have an icon in a small box showing the logo of safari with webloc under him.  have never seen before.  What is it?

  It is a webloc file. A link to a certain Web page. Safari creates these when you drag the icon in the left side of the address bar of Safari on the desktop. He can trash if you do not want.

• I have a power shot sx HS 40 & need information about the use of filters with this camera? Thank you ~.

  I have a power shot sx 40 & would like information on the use of filters with this device?

  Thank you ~.

  Hi Rainlily,

  You will need the # model Canon adapter filter f-DC67A to use filters on this camera, which costs about $25.00. Bower makes one for about $9.00 available in B & H and Bower products work well with the Canon. This adapter uses 67 mm filters. If you have not yet all filters, I would recommend Hoya or Tiffen filters as they are of high quality at reasonable prices. Do not get the expensive filters because in general they can cause color casts that may be difficult to view the process on. Have fun!

  Steve M.

• All the icons and files with the extension .lnk and error message: "Windows cannot open these files.

  Original title: STUCK IN. LNK ??????????????????????????????????????????????????????????????

  all my icons turned into extensions of file and state that "windows is unable to open these files. I can't search the Web for a fix, because it downloads as a .lnk I can't open as well?

  Hi MarcSatz,
   
  -Did you change on your computer before this problem?
   
  This problem occurs when one or more of the following conditions are met:
  • The registry values that are associated with the file name extension are corrupted or missing values.
  • The computer is infected with a virus.

  Here is an article that will guide you in the process of fixing the issue:

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows
   

  Cannot open files with extensions such as.exe, .com, and.lnk on a Windows XP-based computer

• Need to maintain the level of the fastest storage?

  Hey all,.

  I have a 8 Gb FC SAN with 4 shelves.  Most of the readers is 10 K readers, but I have two 15 K disks LUNS.  No SSD, unfortunately.

  I read a few different ideas on what to put on the faster layer:

  • Put the Parent Clone related with the fastest component
    • It would make sense that this would help reconstruct the operations because the replica is generated based on the master, the master must therefore faster storage.
    • Is this performance helps in normal operations?  It seems that recompose would be the main square that this aid.
  • Put the Clone replicas associated with the fastest component.
    • I don't quite understand it, because I thought that each LUN must have a replica.
    • Is it really possible to have a logic unit without a line number (or a logic unit number where the replica is stored elsewhere?)
  • Redirect disposable discs at the fastest level
    • Maybe I heard wrong - wanted - they say "any other level outside the LUN clone related?
    • I see the advantage to spend disposable disks in their own logic unit number.

  Thank you
  Drew

  Depending on your version, you can certainly have a LUN dedicated to replicas, which means that you would not have to have a replica on each logical unit number where clones are stored.   If you change the settings of your pool and visit data store option, you will see a checkbox to use different datastore for OS disk and disk to view composer.   Select this check box, and then select your data store that you want to place the replica.     Generally, it goes in the following order, but can be changed to match your environment.

  replica SSD

  clones FC

  Persistent, SATA drive

  See also this blog post, http://myvirtualcloud.net/?p=1137

• Need to insert the Date and time with AM or PM

  StartDate form has ' 25/07/2006' and Starttime "13:07.
  I need to add this field in the database to display the Date and time with the AM or PM. But the result I get is false.
  <! - concatenate fields - >
  "< cfset Startdate = #Startdate # &" "& #starttime # >.
  
  < cfset startdate = #DateFormat (CreateODBCDateTime (Startdate), ' mm/dd/yyyy hh: mm: tt ') # >
  Here is my production. This is not the AM or PM conversion part of the chain.
  
  25/07/2006 01:07 am
  
  My database is SQL 2000
  

  You use any of dateformat. The createodbcdatetime sends the correct your DB value if you do it right.

• Hi, need to change the color of line at run time

  Hi all
  
  I have columns in the paintings is one of them for YES and it is of TYPE I create two attribute for this and place like this to trigger post_query block-level after that I get what I want the color of the YES and NO, but
  NOW I NEED TO CHANGE THE LINE COLOR IN FULL WHAT IT TAKES PLEASE GUIDE
  
  IF: ORDER_TRACKER2. TYPE = "YES" THEN
  SET_ITEM_INSTANCE_PROPERTY ('ORDER_TRACKER2.) TYPE ', CURRENT_RECORD, VISUAL_ATTRIBUTE, 'ATT_NO');
  ON THE OTHER
  SET_ITEM_INSTANCE_PROPERTY ('ORDER_TRACKER2.) TYPE ', CURRENT_RECORD, VISUAL_ATTRIBUTE, 'ATT_YES');
  END IF;
  
  Thanks and greetings
  Vikas Singhal

  IF :ORDER_TRACKER2.TYPE = 'YES' THEN
    SET_ITEM_INSTANCE_PROPERTY ('ORDER_TRACKER2.TYPE', CURRENT_RECORD, VISUAL_ATTRIBUTE, 'ATT_NO');
    SET_ITEM_INSTANCE_PROPERTY ('ORDER_TRACKER2.ITEM1', CURRENT_RECORD, VISUAL_ATTRIBUTE, 'ATT_NO');
    SET_ITEM_INSTANCE_PROPERTY ('ORDER_TRACKER2.ITEM2', CURRENT_RECORD, VISUAL_ATTRIBUTE, 'ATT_NO');
    SET_ITEM_INSTANCE_PROPERTY ('ORDER_TRACKER2.ITEM3', CURRENT_RECORD, VISUAL_ATTRIBUTE, 'ATT_NO');
    SET_ITEM_INSTANCE_PROPERTY ('ORDER_TRACKER2.ITEM4', CURRENT_RECORD, VISUAL_ATTRIBUTE, 'ATT_NO');
    SET_ITEM_INSTANCE_PROPERTY ('ORDER_TRACKER2.ITEM5', CURRENT_RECORD, VISUAL_ATTRIBUTE, 'ATT_NO');
  ELSE
    SET_ITEM_INSTANCE_PROPERTY ('ORDER_TRACKER2.TYPE', CURRENT_RECORD, VISUAL_ATTRIBUTE, 'ATT_YES');
    SET_ITEM_INSTANCE_PROPERTY ('ORDER_TRACKER2.ITEM1', CURRENT_RECORD, VISUAL_ATTRIBUTE, 'ATT_YES');
    SET_ITEM_INSTANCE_PROPERTY ('ORDER_TRACKER2.ITEM2', CURRENT_RECORD, VISUAL_ATTRIBUTE, 'ATT_YES');
    SET_ITEM_INSTANCE_PROPERTY ('ORDER_TRACKER2.ITEM3', CURRENT_RECORD, VISUAL_ATTRIBUTE, 'ATT_YES');
    SET_ITEM_INSTANCE_PROPERTY ('ORDER_TRACKER2.ITEM4', CURRENT_RECORD, VISUAL_ATTRIBUTE, 'ATT_YES');
    SET_ITEM_INSTANCE_PROPERTY ('ORDER_TRACKER2.ITEM5', CURRENT_RECORD, VISUAL_ATTRIBUTE, 'ATT_YES');
  END IF;
  

• I need to put the icon on my desktop for an internet shortcut

  I lost the icon on my desktop (monitor) for contextual access. This is the icon of E. How can I get that back?

  The Internet Explorer icon is missing from your desktop
  http://support.Microsoft.com/kb/945402

• Need to retrieve the names of columns with PK

  Hi all

  guys I need to get two columns (PK information and secondly with the column name) for the table. I see that's not so easy with Oracle ;(

  I have this for now:

  SELECT all_tab_cols.column_name,user_constraints.constraint_type
  FROM   all_tab_cols, user_cons_columns, user_constraints,user_ind_columns, user_indexes
   WHERE  all_tab_cols.column_name = user_cons_columns.column_name (+)
     AND  all_tab_cols.table_name = user_cons_columns.table_name (+)
     AND  user_cons_columns.constraint_name = user_constraints.constraint_name (+)
     AND  user_constraints.constraint_type (+) = 'P'
     AND  user_ind_columns.column_name (+) = all_tab_cols.column_name
     AND  user_ind_columns.table_name (+) = all_tab_cols.table_name
     AND  user_indexes.uniqueness (+) = 'UNIQUE'
     AND  user_indexes.index_name (+) = user_ind_columns.index_name
     AND  all_tab_cols.table_name = 'MYTABLE' 
  

  but, if KP is then take result duplicate me lines and there is not a simpler way? just need to list all columns of the table with information about the PK

  SELECT acc.column_name,
    ac.constraint_name
  FROM all_constraints ac,
    all_cons_columns acc
  WHERE ac.owner        =acc.owner
  AND ac.constraint_name=acc.constraint_name
  AND ac.table_name     =acc.table_name
  AND ac.constraint_type='P'
  AND ac.table_name     = 'MY_TABLE'
  UNION
  SELECT column_name,NULL FROM all_tab_columns WHERE table_name='MY_TABLE';
  

• How to maintain the pre, post-demande with patch migration

  Hi experts,

  I need suggestions on migration of patch. I must apply all RPC patch file on r12.1.1 for all the module. nearly 40-50 patch must be applied.

  My question is:

  can I migrate all the patch request pre and post request with the main patch.

  and some manual step as post request such as execution one request can be made that all CPP applied patch file.

  and

  a patch were required to apply the patch of delta as R12. AD. B.Delta.3 as long as the request.

  can I have merged this type of patch with the main patch.

  concerning

  pritesh Rodriguez

  in this case is the admerge patch maintain orders to apply the patch?  as

  Patch 1.pre - ask

  2. main patch

  3 post patch request

  Yes.

  Thank you

  Hussein

• can not get the icons to align with links on a page

  Site is: http://bit.ly/1mEOpmDhttp ://

  I inserted a secondary footer for social navigation on all pages of this site and it displays correctly with the exception of the page in the link.  Would be very grateful for help because I just tried, although with the exception of the thing that works lol.

  You have an opening tag 'wrapper' at the beginning of your code, BUT no closing tag

  It must go before your closing tag, like:

  More importantly, you sub the opening tag, which I suppose is not at all in the code, there is also no closing tag, which is the main problem.

  It appears after the

  tag ' Gibb River - 2014' in your code:

  Gibb River - 2014

  Delete (because I don't think it's necessary?) -close your tag 'wrapper' - who must adjust the alignment of the social icons in your footer

• I need to restore the icon of my home 'black and yellow '.

  I had to reload Firefox and when I did, my black and yellow house icon does not appear. Help, please.

  Glenn

  You can find the button at the right end of the Navigation bar.

  Open the Customize via "view > toolbars > customize" or "Firefox > Options > toolbars."

  You can drag the home from its current position to the right button to the previous position to the left of the address bar.

  • http://KB.mozillazine.org/Toolbar_customization

  If you do not have this button on the right end of the Navigation bar then see:

  • http://KB.mozillazine.org/Corrupt_localstore.RDF

• Need to clean the OS installation but with no disc

  I have a gateway desktop that I have to do a new installation of Windows XP Professional. I have misplaced my disc but the product key of the sticker that was placed on the computer. Can I download a trial version of XP Pro and then sign up for the product key I have? Suggestions other that find the disc?

  Contact your computer manufacturer and ask them to send a recovery disk/s XP set.

  Normally, they do this for a cost of $ small.

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  Here is the Vista Forums.

  See you soon

  Mick Murphy - Microsoft partner

• Need to load the page HTML 5 with SQLite in browserfield Blackberry 6.0

  Hi all

  Currently, I am working on the application in which I use static HTML 5, web page with built in SQLite db. I want to load in blackberry Browserfield 6.0 on offline for page web HTML 5 is placed in the my project package. I have developed the code below, but not able to load. What I'm doing wrong, I'm not able to find. Please let me know if you find something I am doing wrong.

  Private BrowserField _bf2;

  Private BrowserFieldConfig _bfConfig;

  _bfConfig = new BrowserFieldConfig()

  _bfConfig.SetProperty (BrowserFieldConfig.NAVIGATION_MODE, BrowserFieldConfig.NAVIGATION_MODE_POINTER);

  _bfConfig.SetProperty (BrowserFieldConfig.JAVASCRIPT_ENABLED, Boolean.true);

  _bf2 = new BrowserField (_bfConfig);

  InputStream inStream = this.getClass().getResourceAsStream("/demo.html");

  ubyte [] bytes = IOUtilities.streamToBytes (inStream);

  Dim str As String = new String (bytes); _bf2.displayContent (str, "http://localhost");

  Thanks in Advanc

  Demo.HTML is packed into your folder of cod?  If so, you can access it by using "local:///demo.html".

  Take a look at the browserfield2demo included in the SDK Java BlackBerry and BlackBerry JDE for an example.

• Need help finding the average across lines

  Hi all
  
  I have a requirement to find a way to several columns in a row. The trickiest part is it may or may not be a value in each of the lines and the average must be calculated for those that have a value. Let me give you an example:
  
  col1 col2 col2, col4
  
  1 NULL 3 5-> average will be (1 + 3 + 5) / 3 = 3
  NULL NULL 2 4-> average will be (2 + 4) / 2 = 3.
  
  A (acc to me dump) option is to get the entire file in the variable % ROWTYPE, scan through each of the columns, see if the value is not null and greater than 0, increment the counter (i) and calculate the sum. Finally make a sum / I. An average was 215 columns that it takes on average and having a separate if end seems illogical. There must be a smart solution to find this kind of average. Help, please.
  
  Thank you
  Aristides

  Hey,.

  SELECT (nvl (col1, 0), nvl (col2, 0), nvl (col3, 0) + nvl (col4, 0)) / (nvl2 (col1, 1, 0) + nvl2 (col2, 1, 0) + nvl2 (col3, 1, 0) + nvl2 (col4, 1, 0))
  Table_name FROM

  I hope this helps.

  -Annick