Need to clean the OS installation but with no disc

Similar Questions

• I need to clean the registry because it has not been done in a long time.

  I need to clean the registry because it has not been done in a long time.  I can't find any software cleaner that cleans all teasers just identify errors and clean up maybe 3 things, but you need to buy to do it all.

  What can I do?

  Do not.  He didn't need it and even if you deleted 1000 things from him (doubtful) it would make little or no impact on performance.

  If you don't understand the registry enough to know what to erase manually or how to add things yourself, etc. - using a tool that almost arbitrarily find the things that are supposed to be orphaned or not necessary and confidence (for some reason any) can lead to a system of death.

  If you just * have to * ("it's a moral imperative") and then use that integrated with CCleaner.  I generally recommend not even consider using its registry "cleaning" component - but in the many times I used to analyze and find things and go through them manually before I remove them (at least - I've seen ~ 250 entries, he suggested to get rid of and even in this case, my manual check led me to delete all and there was no adverse) I didn't it go wrong.  If you * MUST * do it, use it and save your changes, so you might be able to roll back.  Before do you all - make sure your backups are in order.

  Want generally cleaning XP and maybe actually get a performance gain?

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find.  Reboot when necessary.  (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in.  Look for whatever it is you do not know using Google (or ask here.)  You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory.  This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  Do some cleaning and dusting off this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 4.5 and 9 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/index.html

  Those who can help you discover visually where all space is used.  Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Cleaning the components of update on your WIndows XP computer

  While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need.  This will help you ensure that your system update is ready to do it for you.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on the root of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update (you * NOT * use the aggressive version):
  How to reset the Windows Update components?

  Reset.

  Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing you pouvez wish to make:

  Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

  If you want, come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end.  This isn't 100% necessary - but I'd be willing to bet that you would gain some performance and features in making this part.

• Update soundcards site says I need to install the ActiveX control, but there is no bar at the top click or any other option to download.

  Update soundcards site says I need to install the ActiveX control, but there is no bar at the top click or any other option to download.  How can I download this control so I can access the Windows Update Web site?

  See if that helps-

  How to reset the Windows Update settings?
  http://support.Microsoft.com/kb/971058

• I need to format the hard drive but don't have the windows vista disc to reinstall, but have had the key code that vista was preinstalled do I have to buy a new drive for vista

  I need to format the hard drive but don't have the windows vista disc to reinstall, but have had the key code that vista was preinstalled do I have to buy a new drive for vista

  Hello

  How to reinstall Vista

  Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• Copy a few lines in the same table, but with different IDS

  Hi all
  I had this problem... I have a table with its pk (which is a sequence). With a statement select, I extract a few lines, and then I would record in the same table, but with IDS different (obviously eheheh).
  
  I don't know how to do...
  
  Thks for all help ;)
  
  
  p.s. I want to change some fields in lines before saving as well... don't know how do it more...
  
  example:
  
  ID NAME TYPE
  1 ferrari car
  2 cars lamborghini
  
  
  I'm trying to copy the second and changing its type in "BMW".
  
  I could result:
  
  1 ferrari car
  2 cars lamborghini
  3 bmw cars
  
  
  
  Thank you

  Assuming that your table is named cars_tb and the cars_seq of the sequence.

   insert into cars_tb
    select cars_seq.nextval, name, type
    from cars_tb
  

  This would overlap with any existing lines, but with a new id.

  If you want to duplicate a specific line and change a value, you could do something like:

   insert into cars_tb
    select cars_seq.nextval, name, 'BMW'
    from cars_tb
    where type = 'lamborghini'
  

  or better, use the PK

   insert into cars_tb
    select cars_seq.nextval, name, 'BMW'
    from cars_tb
    where id = 2
  

• So I can pick it up at the factory using F11 with no disc setting?

  So I can pick it up at the factory using F11 with no disc setting?

  Hello

  Recovery files are normally hidden in the Windows Explorer, so it wouldn't be a problem - the only way you can be sure that it works or not is to try it.

  If you find that it does not work, you can order a set of replacement recovery disks using the link below and use them to reinstall the OS.

  http://support.HP.com/us-en/document/c00810334

  If you have a problem with this link, order them directly from HP.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  Kind regards

  DP - K

• Need to maintain the icon in line with end of line to write on behavior

  Need to keep an icon that is aligned with the end of the line of movement 5 write on behavior

  I used speed custom behavior to write on to keep the time between specific waypoints proportionally compared to the times of real satellite data. However, I can't understand a simple way to get the icons to move at the same speed as the write on behavior.

  This video shows how they sometimes go ahead and sometimes behind.

  https://youtu.be/jVz9aGIwnEE

  For D24, I used the behavior of trajectory, with the selected geometry and the Bézier path that I used to write it on the behavior in the well. I used markers for the correct waypoint times. Then I used the customized calendar for the end of the line for the behavior of writing to hit points of interest at the right times.

  For D25 I just use keyframes to the waypoints. Can I add image key intermediary to make things line up OK but it is very tedious to do.

  Is there an easier way to get the icons and write them on the behavior to align correctly, or another behavior or any other method I should use to do this? I have some valuable experience with video editing so I might well do something very basic the wrong way.

  may I suggest a different approach?

  Start with your icon (somehow remembers me a bird of Pray Klingon, sorry)

  Animate: Press REC, playhead set at time index, move the position icon...

  

  Thus, icon bird moves exactly at each x / y and precise at the time...

  Now, create a new group "Trail", paint a small circle, make a particle

  

  now, Magic 1st part:

  Set rate of high birth, 300, 500, 1000... determines the "softness" of the line trail

  the life value max

  set the speed to zero - we do not want a cloud of points...

  Finally, Magic pt 2:

  Link group (behavior) the Position of the track to your bird...

  

  In doing so, the transmitter following the bird - and leaves a trail behind it:

  

  How to start?

• What should I do if I need to disable the block add but I need it desperately for Youtube?

  I got a warning on my Tumblr, saying I have to disable an extension for all of the Add-ons on Xensemble to work properly. The problem is that I really want to disable the block add that it is so helpful and I really need. Is there another way to get xensemble to work, but with block adds still in use?

  You can create a filter to not enable Adblock Plus on tumblr, which should avoid this.

  You also need to update Firefox 37.0.1, the version you are using is very ancient.

• Satellite T130-11 t - need to clean the D partition and increase partition C

  Hi all
  This is my first post and Im not a grumpy so apologies in advance. Ive tried searching the Internet for help with this but cant get long, it is therefore proposed that post.

  I have a Satellite T130-11 t which has 232 GB HDD. Setting it up as 2 drives, C and D with 116 GB on each. The C drive is complete, but its probably just photos / movies so I can solve that by copying the external hard disk, but the D drive is roughly the same.

  Ive looked at the directory and under HDD recovery it is a subfolder called swing and inside are 8 x .srm extensions and 2 x crc files, are all of 2009.

  Files take about 8Gb and I can't delete them as it says I should do so under SYSTEM - the operating system is in German so Im a little hesitant exaclty, what the problem is - and systemfile nervous deletion.

  Drive D but has more than 90 GB of info - when I click on drive D in Windows Explorer, it does not at all look like, there are all large files it. Could there be some hidden files not seen Im?

  Performance is very slow and I want to save or delete/reformat the drive D to drain - any ideas how to clean my D drive please and ideally reduce its size and move some of the allocation of memory on the C drive without losing my data already on C?

  I understand forums that the HARD drive is a recovery file, but should take only about 10 GB cannot so I a C of say 200 GB and 30 GB on D drive?

  Yet once I don't want to corrupt or lose all data already C

  Also when I start it, a message informs you that there are missing files in the directorym LOCAL smply disappeared.

  Thanks in advance

  MArk

  My first question is: did you create a recovery (DVD or USB) media? If Yes, you can use this media for any new OS install when you want. With other words, you can delete all the partition recovery D if you want, but in my opinion you should not do this. If these recovery files are still there you will also be able to use the HARD drive recovery facility.

  > Drive C is full, but its probably a few photos / movies so I can solve that by copying on the external hard drive...
  Fix.
  >.. but the D drive is substantially the same. Ive looked at the directory and under HDD recovery it is a subfolder called swing and inside are 8 x .srm extensions and 2 x crc files, are all of 2009.
  This file belongs to the original recovery image. More or less 10GB isn't a big deal. Leave it as it is.
  > Could it be Im not see hidden files?
  It is not easy to say, because we do not know how your laptop is configured and what files should be saved on the D partition. What you can try is to open the control panel > folder options > view > and check for hidden files and folders. Choose the option Show hidden... files and check again the D partition.
  > Also when I start it, a message informs you that there are missing files in the directorym LOCAL smply disappeared.
  In my opinion, nothing can simply disappeared.
  I think you should check them all, back up all of your important and after data makes this OS install using original recovery image. After that do you have own OS preinstalled, portable will have better performance and also, I think that you will be happy again.

• HP G62: I have hp g62 laptop that I need to replace the hard disk but I don't have a lap desk

  I have hp g62 laptop comes with windows 7 Home premium and Microsoft last year offered 10 edition windows Home premium.
  Suddenly the windows closed was a message "hard drive does not exist" or "boot device not found", said another time.
  I need to replace in the old hdd but I don't have a lap desk. The recovery file was recorded in a single partition on the old hard drive.
  How to get started with the new hard drive and recover the old windows, I need help please thank you.
  
  Concerning

  computer laptop laptops installed new hard drive there is message "no partition active" and "no boot device" what I need to do to install windows 10.
  I have no office to boot, I used to run the wind. last summer and 7 MS offered upgrade to the wind. 10 how premium and activated, of I need help thanks
  Concerning

• Officejet Pro 8600: offficejet 8600 pro needs to reset the admin password, but it won't let me move the configuration page.

  I have recently changed service providers and the need to install my printer wireless on the new network, but I can't access the settings to do when he comes back "'feature has been locked by your system administrator or the person who setup your printer" help please! "

  Hey @kcjaydee,

  Welcome to the Forums of HP Support!

  I appreciate that you try to change the settings on your Officejet Pro 8600 e-all-in-one printer wireless. I can help you with that.

  I will send you instructions explaining how to do a factory reset on your printer. If you check your Inbox forum you should see a message shortly.

  Please let me know if that solves your problems. If so, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• I cleaned the print heads, but the printed letters are still coming from pale grey.

  I have a HP Photosmart eStation all in one printer-C510a.  When I print the works are very pale.  I changed the ink cartrideges and cleaned the print heads.  Still very pale.  Any ideas what to do next?

  Hi rab27,.

  Thank you for visiting the Forums from the HP Support! I understand that when you are printing on your HP Photosmart eStation C510, the output is very pale, you attempted to clean the print heads and replace cartridges without success. In order to better assist you, what is the current operating system you use, Windows or Mac and what version?

  I assure you, you are able to make a copy. Can make you a black copy with no problems?

  Now we will make sure that you do not have the printer to print in black and white only. Please follow the steps listed below:

  1. go to your Start Menu

  2. Select devices and printers

  3. right click on your C510 and access print options

  4. click on the advanced option

  5. in the section of the characteristics of the printer, make sure that it is not set to print in grayscale

  Now, let's go and run HP print and Scan Doctor- designed by HP to offer users the features and troubleshooting problem needed to solve many common problems experienced with HP print and scan the products related to Windows computers.

  If you have changed the printing preferences, ran the PSDR HP without success, please continue here: Troubleshooting print quality problems

  I hope this helps, let me know the result.

  Thank you

• Flash Player 11 illustrates the successful installation, but does not work

  I installed FLASH PLAYER 11 on VISTA using IE9 system.

  I have a successful installation when it is finished installing. But I can't watch the videos. I get the message that need to install the FLASH PLAYER to view the video.

  I uninstalled and reinstalled the version and the version 10.1 without success.

  When I look at the PANEL, I see the symbol of FLASH PLAYER. But when I goto the programs and features to uninstall, I see nothing in the SIZE box

  Also, I do not see the FLASH PLAYER 11 in a folder all programs.

  I tried to follow all the procedures without success to online troubleshooting.

  If you still have problems after reinstallation, check also

  • http://forums.Adobe.com/thread/885448
  • http://forums.Adobe.com/thread/867968

• Need to insert the Date and time with AM or PM

  StartDate form has ' 25/07/2006' and Starttime "13:07.
  I need to add this field in the database to display the Date and time with the AM or PM. But the result I get is false.
  <! - concatenate fields - >
  "< cfset Startdate = #Startdate # &" "& #starttime # >.
  
  < cfset startdate = #DateFormat (CreateODBCDateTime (Startdate), ' mm/dd/yyyy hh: mm: tt ') # >
  Here is my production. This is not the AM or PM conversion part of the chain.
  
  25/07/2006 01:07 am
  
  My database is SQL 2000
  

  You use any of dateformat. The createodbcdatetime sends the correct your DB value if you do it right.

• I have a power shot sx HS 40 &amp; need information about the use of filters with this camera? Thank you ~.

  I have a power shot sx 40 & would like information on the use of filters with this device?

  Thank you ~.

  Hi Rainlily,

  You will need the # model Canon adapter filter f-DC67A to use filters on this camera, which costs about $25.00. Bower makes one for about $9.00 available in B & H and Bower products work well with the Canon. This adapter uses 67 mm filters. If you have not yet all filters, I would recommend Hoya or Tiffen filters as they are of high quality at reasonable prices. Do not get the expensive filters because in general they can cause color casts that may be difficult to view the process on. Have fun!

  Steve M.