Need to reinstall CF9 Enterprise - Windows 64-bit

Similar Questions

• I need to reinstall a clean vista 32-bit, but after you have entered the activation code I get the error from a previous version of windows

  Because the two system restore points are corrupt, I need to reinstall vista, but I get an error message using the previous operating system after I entered the activation code, is there a work around? (lost in moving to the new apt disk backup)

  Hello

  you sitting not what type of disc you are using

  you start from the DVD drive to do a clean install

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  and read this too

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  and here are the different ways to reinstall vista

  Contact the computer manufacturer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

• Need to reinstall drivers after Windows 7

  I had to completely reformat my hard drive and reinstall windows from a usb key. Now, I need to get drivers for my network card. Any help would be appreciated.
  Hardware IDS are as follows:
  Ethernet controller
  PCI/VEN_10EC & DEV_8136 & SUBSYS_3577103C & REV_05

  PCI/VEN_10EC & DEV_8136 & SUBSYS_3577103C

  PCI/VEN_10EC & DEV_8136 & CC_020000

  PCI/VEN_10EC & DEV_8136 & CC_0200

  Network controller:
  PCI/VEN_10EC & DEV_8176 & SUBSYS_1629103C & REV_01

  PCI/VEN_10EC & DEV_8176 & SUBSYS_1629103C

  PCI/VEN_10EC & DEV_8176 & CC_028000
  PCI/VEN_10EC & DEV_8176 & CC_0280

  PCI device:
  PCI/VEN_10EC & DEV_5209 & SUBSYS_3577103C & REV_01
  PCI/VEN_10EC & DEV_5209 & SUBSYS_3577103C

  PCI/VEN_10EC & DEV_5209 & CC_FF0000

  PCI/VEN_10EC & DEV_5209 & CC_FF00

  If anyone knows where I can get these drivers, id really appreciate it. Thank you!

  Hi theogShiggles

  1. Realtek PCIe FE Family Controller series
  2. Driver LAN 802.11b/g/n Realtek RTL8188CE wireless
  3. For Windows 7 Realtek card reader driver

• Recovery disk need to reinstall Windows Vista

  original title: need to help restore my laptop and do not have disc for windows vista untimate, how do I do that

  I have windows vista ultimate and need to reinstall operating system but do not have the disc to do this, what can I do, please email me at * address email is removed from the privacy * with a solution to this problem.  My computer is about to crash because of a sort of Trojan horse.  Please notify.

  Hello

  Here are the other ways to reinstall vista

  Contact the computer manufacturer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F10 or F11 or Alt + F10, 0 at startup to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  or borrow a microsoft dvd vista

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  Save all data, because it will be lost, do the above

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

  or try to remove malicious software

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• I need to reinstall Windows Vista but the sticker on the laptop product key is not readable.

  My partner has an Acer laptop running Windows Vista Basic 32-bit. He needs a complete reinstallation of Windows because there a lot of problems now. The problem is the sticker of the product key on the laptop is often illegible. I tried to use the Magic Jelly Bean finder key to resolve this issue, but the key does not match what the letters which are readable on the sticker. I tried this on my own laptop and had the same problem (sticker key did not key on the computer). Neither laptops have had Windows reinstalled before. I learned that the keys posted by Magic Jelly Bean are in fact license keys of Volume factory installed by the OEM rather than found on the stickers product keys and Volume license keys cannot be used to reinstall Windows.

  His cell phone doesn't have a recovery disk or a recovery partition, but even if she did, given its current state, a complete reinstallation is what it takes. Her cell phone is not come with a Windows Installation DVD, either, but we can borrow one from a friend who owns a disk with the same version of Windows as his laptop and I know that works perfectly. We just need a way to recover the product key that was on the sticker. We are not ready to buy a new copy of Windows that we already have a license (through the purchase of the laptop) key.

  PS I remember that I helped my father after reinstall Windows XP. We tried both the key on the sticker of his PC and the one that we found on the PC itself (Volume key). In the end, only the key on the sticker has worked. This confirms that a Volume license key cannot be used to reinstall Windows.

  Hello

  We cannot help you with your product key and there are no records of loan use

  recovery discs are brand and the specific model

  and product key finder programs will not help you find product keys that you can use vista preinstalled in these circumstances

  to reinstall vista use either disk or recovery partition recovery manufacturer, since they do not normally require an input key product on your part

  The manufacturer must provide a way to reinstal vista or by disk or a recovery Partition

  Contact Acer recovery Vista disc

  https://secure.TX.Acer.com/rcdb/main.aspx?brand=Acer

  and Acer has a "hidden" recovery partition

  Normally with an Acer, you press Alt + F10 at startup to start the process, or if it is still ongoing, you go to section eRecovery under [programs and search for how to make recovery discs and the use of the recovery partition

• I need 2 reinstall windows vista, but have had is no longer my installation cd, cani always reinstall? __

  I need 2 reinstall windows vista, but have had is no longer my installation cd, cani always reinstall?

  How to get Vista recovery Media or the Vista recovery Partition on your computer back to factory settings.

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Ask them if you can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/default.aspx/KB/326246

  'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

  See you soon.

  Mick Murphy - Microsoft partner

• Need to reinstall Windows 7 Home Premium (links are down)

  You have a problem here. My laptop was pre installed with windows 7 Home premium.  And, he has been infected with the virus. I tried to update using samsung recovery program and will end up being crushed. You have no recovery disk or USB. Searching through Internet, but the links are all down. I know that these days people prefer to use windows 8, but I prefer this windows. Hope someone can provide me with new link. It is windows 7 Home premium 64-bit OA SEA. And I have the product key. No worries.

  Hello

  Check with support from Samsung and their documentation online. They allow the recovery and
  clean if necessary installation media. Which should be at low cost since you already own windows.

  You mean reinstall the OS completely? If you have the Windows 7 DVD you can do however
  don't forget to completely backup your data off the drive, and you need to reinstall your programs. If you
  don't have Windows 7 disks, you can buy them in your machine to cheap system. If you don't like
  on existing programs then you can do a complete new installation - just select the format options
  which erases the entire disc (This erases all data as well).

  Some system manufacturers use Partitions of recovery as well as other methods to allow you to return
  Back to a completely new installation. So check with your system manufacturer to see what options
  you need to do - and certainly do - just a question of the process of the
  Manufacturer of the system put in place for you.

  How can I perform a clean Installation of Windows?
  http://pcsupport.about.com/od/OperatingSystems/f/clean-install-Windows.htm

  How to do a clean install with Windows 7, this wipes ALL programs and data on
  http://www.SevenForums.com/tutorials/1649-clean-install-Windows-7-a.html

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  How to do a Custom Installation of Windows 7
  http://www.SevenForums.com/tutorials/20146-custom-install-Windows-7-a.html

  How to do a clean install with a Windows 7 upgrade Version
  http://www.SevenForums.com/tutorials/31402-clean-install-upgrade-Windows-7-version.html

  How to do a upgrade install Inplace of Vista to Windows 7
  http://www.SevenForums.com/tutorials/1818-upgrade-install-Windows-7-a.html

  Installation and reinstallation of Windows 7 (upgrade - store programs and data or New Installation)
  which removes the)
  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  ========================================

  If you need to repair disks - these help repair Windows not re-install.
  Often, these records will help when the OEM recovery disk does not work.

  Download Windows 7 system recovery discs - charge now $9.75 for ISO
  images to make the discs. (It can be done on any computer running XP,
  Vista or Windows 7 which has a CD/DVD burner).
  http://NeoSmart.net/blog/2009/Windows-7-system-repair-discs/

  How create a Windows 7 system - free repair disc (must be made on a
  Windows 7 computer running the same 32-bit or 64-bit).
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  An installation disc is possible also to use for repair. Of course you would
  Use your own COST (product key).

  How to: What are my options for Windows 7 reinstall media?
  http://answers.Microsoft.com/en-us/Windows/wiki/Windows_7-system/how-to-what-are-my-options-for-obtaining-Windows-7/528163c1-0b2e-4AD2-a26d-7112851d1dc2

  See MVP Andre Da Costa message in this thread.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/how-can-i-download-gatewaywindows7recovery-disc/3c0ecd74-CFC1-4188-89c7-a6bbe8113ee1

  ======================================

  If necessary:

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Samsung laptop computer does not load windows 7, need to reinstall (no cd, no cd key)

  Samsung laptop comes with windows 7, does not load past the bottom (and even in this case, does not load the user/pw. Need to reinstall how? It did not come with a cd key and I tried to go back to the last good config and it did not work (im going with a file corrupt and need a cd key). He gets in the background, but is not past. I want to just reinstall windows 7 home 64 bit, but I miss a cd and don't know how to get the cd or the cd key for it.

  New computers coming often pre-installed with Windows 7 have what is called a recovery partition. This is used to reinstall an operating system in the case of a system failure. To access it, you need to start when you start your computer by pressing a function key. This can be either F1, F2, F9, F10, F11, F12 key DEL or tab. See the manual that came with your PC for instructions on how to reinstall Windows.

  This is how the recovery partition is accessible to most popular brands...

  For Samsung, press F4 to the power upward...

  You will probably find the product key in the compartment to batteries.

  COA certificate of authenticity:

  http://www.Microsoft.com/howtotell/content.aspx?PG=COA

  What is the certificate of authenticity for Windows?

  http://Windows.Microsoft.com/en-us/Windows7/what-is-the-Windows-certificate-of-authenticity

• RoboForm does not work with your new browser. It is very fustrating and works only with Windows Explorer. I need to reinstall the old FIREFOX program?

  RoboForm does not work with your new browser. It is very fustrating and works only with Windows Explorer. I need to reinstall the old FIREFOX program?

  RoboForm has already released a version with support for the latest version of Firefox. See http://www.roboform.com/support/news. Try upgrading to the latest version of Roboform.

• HP Jet 7 - 5709: need to reinstall Windows 8.1 with Bing

  Hello

  How to reinstall Windows 8.1 with Bing on my Tablet? I have the OEM key I need to reinstall with, but when I try to reinstall Windows 8.1 (standard) he says that the key is not to this version of Windows. I need to find Windows 8.1 with the Bing installation media?

  Hello

  Unfortunately your key will not work for 8.1 with Bing and is only available through oem (HP) - you will need to order recovery media from the link on your Product Page.

  Kind regards

  DP - K

• Windows 2003/2008 server Enterprise Edition 32-bit RAM OS compatibility issue.

  We just bought 2 servers architecture 64-bit with 16 GB RAM on each server blades. seller want to install windows server 2003/2008 Enterprise Edition 32 bit OS on these because of the compatibility of the applications server computers. I heard that windows 2003 32-bit server supported only 4 GB of RAM. So, in this scenario, another 12 GB of RAM will be unusable or full 16 GB of RAM will rely on this machine so install us windows 2003/2008 server enterprise R2 32 OSi. Also say us no other solution.

  Hello

  Your question of Windows 2003/2008 Server suitable for the IT Pro TechNet public. Please post your question in the Technet Forum. You can follow the link to your question:
  http://social.technet.Microsoft.com/forums/en-us/categories/

• My compaq presario has crashed and I lost everything, don't have the disc anymore so I need to reinstall Windows XP pro sp2 but no disc and there is nothing in the partision

  don't have the disc anymore so I need to reinstall Windows XP pro sp2 but no disc and there is nothing in the partision

  Hello

  Thanks for posting the question in the Microsoft Community!

  You can't use the computer and reinstall the operating system.

  To help you better, we need more information.

  1. What do you mean by computer crashed? Do you get any error messages?

  2. is the computer, a laptop or desktop?

  If you use a laptop, you can contact the computer manufacturer to get an installation disc.

  If you need any help or if you encounter problems with Windows in the future, let us know and we would be happy to help you.

• I need to reinstall Windows XP SP2, but my windows XP installation CD is cracked and would not read.

  Cracked Windows XP SP2 CD

  I need to reinstall Windows XP SP2, but my windows XP installation CD is cracked and would not read. I have the product key and proof of license. Is there a way to download files from microsoft directly support installation using this information.

  Please see:

  http://support.microsoft.com/kb/326246 .

• I have a laptop OEM with a Windows XP Home Edition (English language). I need to reinstall, but disk is damage. Where can I find the product so that I can download and reinstall?

  I have a laptop OEM with a Windows XP Home Edition (English language). I need to reinstall, but disk is damage. Where can I find the product so that I can download and reinstall?

  Hello

  Contact the manufacturer of your laptop and see if they have a disc of recovery of your brand and the portable model.

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  See you soon.

• I need to reinstall it on a Windows XP Professional (SP3) but cannot find how - can someone help me please

  Unavailable Windows Firewall...

  I need to reinstall it on a Windows XP Professional (SP3) but cannot find how - can someone help me please

  To install the Windows Firewall, follow these steps:

  1. Click Start, click run, type cmd, and then click OK.
  2. At the command prompt, type the following command and press ENTER:
     Rundll32 setupapi, InstallHinfSection Ndi-Steelhead 132 %windir%\inf\netrass.inf
  3. Restart Windows,
  4. Click Start, click run, type cmd, and then click OK.
  5. At the command prompt, type the following command and press ENTER:
     Netsh firewall reset
  6. Click Start, click run, type firewall.cpl, and then press ENTER. In the Windows Firewall dialog box, click on (recommended), and then click OK.